How to Configure approval

Hi,
I want to configure approvals on a service only for VSO. So I add an approval in Authorizations tab and I put this on the condition field:
"Approval"="Approval" and "SIBDApprovals.OTAApproval"="Yes".
I checked that the value of OTAApproval is "Yes" when the user is a VSO and "No" if an OTA order this service.
But it doesn't work. There is no approval. If I only use "Approval"="Approval" as a condition, there is an approval for all user who order this service.
So how to configure Approval for VSO and not for OTA?

You'll want to start with configuring approval for this service via the Configure Approvals service.
And then extend the service with an additional conditional for VSO users only.

Similar Messages

  • HOW TO CONFIGURE MANAGER or APPROVER USER IN ACCESS REQUEST MANAGEMENT TO APPROVE OR REJECT REQUEST

    hi sap gurus,
    i configured grc 10 system successfully. I created one user: GR_AR_APP001 and assign following roles:
    SAP_GRAC_ACCESS_APPROVER
    SAP_GRAC_ACCESS_REQUEST_ADMIN
    SAP_GRC_FN_BASE
    SAP_GRC_FN_NUSINESS_USER
    and I maintained GR_AR_APP001 in access control owners as "POINT OF CONTACT", "SECURITY LEAD" and "WORKFLOW ADMINISTRATOR"
    but when i am creating access request for new user and defining MANAGER under user details tab as GR_AR_APP001.
    the user GR_AR_APP001 is not receiving any request for APPROVE or REJECT in his WORK INBOX.
    can u please guide me how to configure APPROVER or MANAGER to approve or reject request.
    I will be very much thankful if you guide me successfully.

    Hi Colleen,
    thanks a lot for your time.
    PIC1: I created one user: GR_AR_APP001
    and assigned all the GRC ROLES.
    PIC2: I assigned owner type to GR_AR_APP001 user : POINT OF CONTACT, SECURITY LEAD and WORKFLOW ADMINISTRATOR in NWBC ACCESS CONTROL OWNERS
    PIC3: I created one EUP 980 (copied from default EUP)
    PIC4: I maintained default manager as GR_AR_APP001 user in 980 EUP
    PIC5: I selected SAP_GRAC_ACCESS_REQUEST process id
    PIC6: I created one agent id as ZGRAC_MANAGER11 in which I added approver user id: GR_AR_APP001
    PIC7: I saved agent id
    PIC8: I added agent id as ZGRAC_MANAGER11 in stage5 in manager stage.
    PIC9: I saved
    PIC10: I maintained EUP 980 (in which I configured manager as GR_AR_APP001 user) in stage 5 task settings
    PIC11: Maintain Route Mapping, I clicked on next
    PIC12 and PIC13: I saved and activated.
    After this process I created one request for new account and selected the manager as GR_AR_APP001 and one request is created with request no 9000000030.
    now I logged into system by user GR_AR_APP001 and checked, there is no request under his work inbox.
    please guide me at least one procedure, how to receive request in approver work inbox so that I can learn other procedures to configure approver as per our organization requirement.
    thanks for your support Colleen.

  • EP7.0 - How to configure UWL Mass Approval Column

    Hi All,
    Any one of you know how can I configure the UWL with "Approve" and "Reject" column for ESS-Leave Request mass approval?
    For example, the manager can perform the mass approval by clicking the "Approve" check box and click "submit" button from the UWL instead of approve one by one....
    We are using EP7.0
    Thanks!
    Best Regards,
    S.Y

    Hello SY,
    This can be achieved using an xml config. The following document describes the config you need to do to achieve the decision (Mass Approval) view:
    <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fa21a890-0201-0010-708b-d0cfc117e7cd">How to configure the UWL</a>
    This should help you get started. Feel free to post any queries to the forum.
    Sudha

  • How to Configure OIM 9.1 for Request-Based Provisioning

    Hi experts,
    I am new to OIM and need to know how to configure request based provisioning. Here is the scenario.
    My environment has two target systems (Sun LDAP and Novell EDirectory) configured for provisioning to OIM 9.1
    A user should be able to login, request either or both (SUN LDAP and EDir) for self or others.
    Now the request should go to an admin for approval.
    Once approved, the requested accounts should be created on the target systems.
    Please guide me on the procedure to be followed.
    Many thanks in advance

    You will have to download the standard out of box connector for these target systems & will have to import it through the Deployment manager into OIM. Then you will have to create the Process definition of approval type & attach it to the same resource object. Please read the belo link before implementing any thing. This will provide you a better idea.
    http://download.oracle.com/docs/cd/E10391_01/doc.910/e10363.pdf

  • How to configure release procedure for rate contracts release

    Dear all,
    How to configure release procedure for rate  contract following are the requirements
    they are two release codes c1 & c2 <=100000,>=100000
                    if  c1 is not there c2 has to be approved
         Change in the value of the rate contract contract
         Change in the validity of the rate contract
         Addition of deletion of line items
    While using a non u2013 released rate contract in the PO an error message should shoot out.
    Also the logic should be changed while using the rate contract in the PO.
    The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
    It should be possible to refer existing valid rate contracts in purchase orders.
    Regards,
    bhaskar

    Hi,
    In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables  for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
    class in standard is the same FRG_EKKO, you can use the same for contract.
    To distinguish if it's a contract or PO, EKKO-BSART can be used.
    For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
    You can restrict the document type to set up the release strategy for only contract.
    Of cause, you can also create your own release class Z* for contract copying standard
    one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
    OLME:
    -> contract
    ->Release Procedure for Contracts
    ->Define Release Procedure for Contracts
    ->Release Groups
    If you have already created the PO release class.
    Assign a new chracteristic of Document Category -BSTYP
    Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

  • Configuring approval for update of some profile attributes

    Hi All,
    I need to configure approval when some of the profile attributes are updated.
    1. How do i know which attribute is updated?
    2. How do i configure approval ?
    Thanks in Advance.
    Shrinath

    The standard strategy for detecting which attribute has been updated is to add a hidden "shadow" attribute for each attribute.
    Implementing your scenario turns out to be a bit complex but I think the following approach should work.
    To implement your scenario you also need a boolean flag for each attribute kept in a db table or lookup table (not on the USR form). This flag is normally set to false.
    When a change comes in the shadow attribute is used to detect which attribute is updated through a post insert event handler (or entity adapter). This adapter sets the flag to true, resets the main attribute to the value kept in the shadow attribute and kicks off the request. The entity adapter always checks the flag as the first step in the flow and if the flag is set the entity adapter does nothing.
    This will trigger the event handler but as the two attributes now are identical nothing happens.
    When the approval is done either the change is approved or denied.
    In the case of approval the provisioning code sets the flag to false and writes the new value to the main attribute, next to the shadow attribute and finally sets the flag.
    In case of denied you need to reset the flag to false. Not exactly sure if you can do this as part of the deny workflow or if you would have to create a scheduled task that does this.
    A bit complex but should solve your problem.
    Hope this helps
    /Martin

  • How to Configure Transport MAnagement system in CHARM

    Hi
    How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
    Can any one tell me the detailed process? If you have any Configuration document please share it to me
    Points will awarded for helpful answer
    Thanks
    Bhaskar

    In a two system landscape is it necessary to make development the domain controller always?
    No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
    This is not recommended.
    Regards,
    Ashutosh

  • How to configure workflow notification mailer for iPad

    EBS R12.1.3
    Sun Solaris 11
    DB 11g
    First i apologize for users here becasue i have to repost this. May be i did not ask proper question last time
    Currently my users got the internet expense or requsition approval in  an email with an attachment and when users open the attachment the Oracle HTML page open and allow click on approval or reject. This works fine from outlook email from desktop. But when users receive the email on iPad the attachment does not open. It give the blank page.
    Can someone advise how can user approve the work flow notification from iPad.  This is my analysis for our requirement. Can someone advise am i on right direction. if there is any Oracle docuemnt available then please provide the doscument detail or sequence of doscument that i need to follow
    Set up the IMAP4 compilance unique inbound email with INBOX, PROCESS and DISCARD folders
    Configure the inbound email from OTM
    Ignore the outbound email configuratiion from OTM becasue it is already working. It is set with SMTP
    Check the inbound and outbound connection from ebs server
    If you can not ping the IMAP server or telnet the SMTP server from ebs server. Make sure firewall/ports are open
    Add inbound and outbound server entry in server host file
    Apply the patch 16328729 for iPad compatibility
    Test it
    What would be the over all impact of this change. will the users still able to approve the notification using the attachment or this will change.

    Pleas see the following links/docs.
    http://search.oracle.com/search/search?search_p_main_operator=all&group=Blogs&q=iphone%20weblog:stevenChan
    How To Get Oracle iProcurement Workflow Notifications To Work For Outlook On Blackberry or Other Mobile Devices Such As Phones and Tablets (Doc ID 1424978.1)
    Troubleshooting Inbound & Outbound Email Notifications (Doc ID 1184846.1)
    What are the Prerequisites for Implementing iPhone with Business Approval For Managers Product (Doc ID 1388153.1)
    Thanks,
    Hussein

  • How to Configure POWL in SRM 7 Shopping Cart

    Hi,
       Can i know how to configure POWL for SRM7 Shopping Cart
    with regards,
    Kawrthik.

    Hello,
    you mix two concepts which make difficult to understand your request.
    Screen-shot you gave us in from the Portal (Tasks, Alerts, Notifications and so on...).
    With Enterprise Portal, to approve Workitems, your inbox (SBWP transaction) is the Universal WorkList.
    With NetWeaver Business Client, you use Personal Object Work List to have access to your inbox.
    In this last case, you have to switch the Portal-Independent Navigation Frame (IMG: SAP Implementation Guide > SAP Web Application Server > SAP Supplier Relationship Management > SRM Server > Technical Basic Settings > Portal-Independent Navigation Frame > Activate/Deactivate Portal-Independent Navigation Frame) on.
    If you connect to SRM through Portal, you cannot use POWL as inbox.
    Regards.
    Laurent.

  • How to configure the ApprovalTask.task

    Hi,
    I have to create a SOA workflow in OIM and we have three different scenario's to be covered in workflow for same Resource Object In OIM.
    1) Some User need only Manger Apporval
    2) Some User need only  Resoure Administaror Group Approval
    3) Some User need need both group and Resouce Administrotor Approval.
    From Java code in Jave Embeeded task i can decide what type of approval need(above three) but
    I am not able to understand how we configure this in Apporval.task in SOA so that it does approval accordingly . Can someone please assist me.
    Thanks,
    Raj.

    Write your code with all your scenarios so that in the end you have identified the values for each possible approver.  If one is not needed, set the value to "false" or some other value and pass it back into your payload.  In your approval task, create an assignment for each.  In the bottom section of each assignment, there is an entry that lets you set an ignore value so use the payload value = 'false' comparison for that assignment.  Then it will skip any of the other approval task assignments in your list of approval tasks.  This will let you still have a single approval task for all the combinations.
    -Kevin

  • How to configure PPAP in QM

    Dear All
    Please guide me how to configure PPAP (Production Part Approval Process) in SAP QM module.
    Regards
    Satish Kumar

    Go through threads
    PPAP Approval
    And
    http://www.sapfans.com/forums/viewtopic.php?f=27&t=334974&p=1021019
    http://boardreader.com/thread/PPAP_with_SAP_6nzgX76gu.html

  • How to start approval procedure

    how to start approval procedure on item master data????
    Edited by: VINAYAK CHA on Feb 21, 2012 8:56 AM

    when person goin to add item master data ,so before adding, it shoud be approval by senior person.
    I have a scenario where 2 level of approval stages to be configured. For Example : A is originator, B is first level authoriser and C is 2nd Level authoriser. Now, A originates document as it goes for approval to both B & C simultaneously. what I want is that A originates the document as it goes to B for approval. After B approves then only go to C for apporval otherwise not. Is it possible to map in system ?? Please guide...
    Edited by: VINAYAK CHA on Feb 21, 2012 11:45 AM

  • How to configure Fiori Launchpad

    Hello Everyone,
    I'm struggling for a few days now to get the Launchpad running.
    Would anyone be so kind to give me a step by step description on how to configure the launchpad?
    I read about different urls (launchpage/launchpad) and tried to figure out how LPD_CUST works to generate the launchpad tiles, (or chips ?) but unfortunately I can't get it working.
    I don't have the tile to choose from to add to a group in the admin page.
    I added the roles mentioned SAP_UI2_* to my user already.
    Release is 740.
    At the moment I have only the PO Approval app running and tested which works fine standalone.
    Thanks a lot for advice.

    I went trough the webservices again and found an issue with the "transport" service which wasn't generated correctly.
    The SICF node wasn't activated and the system alias was missing which I've updated now with local and U5C_800_PGW.
    But when I go to .../arsrvc_upb_admn/main.html I receive this error:
    Error in OData response for GET "/sap/opu/odata/UI2/TRANSPORT/CustomizingRequests?$filter=isDefaultRequest%20eq%20true": HTTP request failed
    Details: Data Provider implementation 'ZTRANSPORT_MODEL_0001_BE' '01' 'DEFAULT' does not exist
    Any idea?

  • How to configure oracle listener profile for multiple oracle database

    Hi,
    I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
    I'd like to know how to configure listener in this kind of envirnmonent.
    a. use two listener and different ports
    b. use same listener but different ports
    c. use same listener and same port
    Which is the correct mothed?
    And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
    Please advise.
    Thanks a lot.
    Regards,
    Alex

    Hi,
    standard installation is creating new configs for listener for each instance.
    I would recommend to use one listener per each instance.
    YOU CAN NOT HAVE one port number for two differnet systems!
    If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
    For example PORT= 15<system number>
    Peter

  • How to configure one TREX host with multiple index servers ?

    Hi All,
    Does anyone know how to configure TREX on the one host,
    with multiple index servers ?
    Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
    our KM content for portal users.
    I am using TREX 7 and have not been able to do this,
    despite reading the Single and Distributed install
    documentation.
    Any help would be appreciated.
    Regards,
    Andres

    Hi Andres,
    To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
    Proceed like this:
    1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
    2. In TREXdeamon.ini go to
    [daemon]
    references sections below
    programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
    and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
    3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
    Go to the last two columns and move the indexes (move master here/secondary mouse click)
    If you don't distribute the indexes the new index server process will be regarded when an new index is created.
    Hope this helps!
    cheers
    Bettina

Maybe you are looking for