How to create the Hierarchial table using ALV.in WD4A

Hi All,
I am struggling hard to make the hierarchial ALV, But could not do it.
Could you help me.
Actually I want the column to be hierarchial. For this i am using
if_salv_wd_column_hierarchy~set_hierarchy_column.
Also i tried to display the whole table as Hierarchial
lr_table_settings->set_display_type( if_salv_wd_c_table_settings=>display_type_hierarchy ).
For both the possibilities the result is not as desired.
Regards,
Arti.

Hi Aleem,
The link u have provided gives the solution for the Table.
I want the implementation for ALV.
Also my requirement is that the first column of the ALV should be hierarchial.
On expanding the table cell of first column one more table should open of same type.
This way user can navigate to three diffierent database tables.
The tree is populated at runtime with the data. So the depth of branches is unknown at design time.
I hope the requirements are clear to u now.
Thanks and Regards,
Arti.

Similar Messages

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to create the sales order using BAPI's ....?

Hi Guru's,
could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically i don't have basic knowledge on this....please provide required inputs ....:)
thanks in advance
Srinivas......

Hi Guru's thanks for your inouts and your valuble time...
please find the program logic below...
*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln                   TYPE vbak-vbeln,
       gs_order_header_in         TYPE bapisdhd1,
       gs_order_header_inx        TYPE bapisdhd1x,
       gt_order_items_in          TYPE STANDARD TABLE OF bapisditm,
       gwa_itab1                  TYPE bapisditm,
       gt_order_items_inx         TYPE STANDARD TABLE OF bapisditmx,
       gwa_itab2                  TYPE bapisditmx,
       gt_order_partners          TYPE STANDARD TABLE OF bapiparnr,
       gwa_itab3                  TYPE bapiparnr,
       gt_return                  TYPE STANDARD TABLE OF bapiret2,
       gwa_itab4                  TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
    order_header_in               = gs_order_header_in
    ORDER_HEADER_INX              = gs_order_header_inx
IMPORTING
    SALESDOCUMENT                 = gs_vbeln
tables
    RETURN                        = gt_return
    ORDER_ITEMS_IN                = gt_order_items_in
    ORDER_ITEMS_INX               = gt_order_items_inx
    order_partners                = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF.

How to create the fact table

pleae let me know how to create the fatc table by using pl/sql packages
Edited by: 792988 on Sep 6, 2010 3:34 AM

Please let us know something about your fact table.
There's no create_fact_table() procedure that could satisfy everybody.

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

How to fix the financial table using script

Hi All,
How to fix the financial table using script, (for example see below table. i have fixed manually, my document having more than 50 tables)
%, ) are hang aligned.
$ are left aligned as like below.
Regards,
Velu

Hi Velu
The quality of your screenshot came out pretty bad
Maybe send another higher resolution one which on a smaller part of the table and show the hidden characters

Need help on how to create the simple mapping using ORACLE DATA INTEGRATOR

Hi guys,
am new to learn odi.. please share me or steps how to develop the simple mapping using ODI...

Hi,
I am a newbie to Oracle Data Integrator as well. You should have a look here first; http://www.business-intelligence-quotient.com/?p=379
Try to play around with ODI and then come back if you have specific questions. You should better move to this ODI-forum; Data Integrator
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

How to read the source table using a dblink in oracle

Hi,
I want to read data from a source table which I can access using dblink in the datawarehouse. I tried different things in DI and I don't know how to do that? Can any one help me on this?
Thanks,
Gowri

Two options:
First you could create a view in the dwh database that is using that remote link: create or replace view r_source as select * from source@dblink.
Better option is to create the source system datastore - but I assume that exists already - and then go to the dwh datastore and say that there is a dblink of a given name with which the target database can read from the other database. DI then will execute a insert...select from source@dblink kind of statement whenever that is possible. In case no such full pushdown is possible and the data is going through the DI engine anyway, reading via the dblink does not make sense anyway.
https://boc.sdn.sap.com/node/5065
https://boc.sdn.sap.com/node/5814

How to create the trace file using run_report_object at runtime

Dear All
using :
Oracel Application Server 10g
Oracle Database 11g
Windows XP/sp3
I'm using run_report_object to call a report inside the form. THis report is running OK from reports builder, however it's too slow when run from Application server.
How Can I create a trace file (at runtime) that contains the time spent in sql and formating the layout of the report ??
Here is My code :
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'INVOICE.REP');
v_url :='paramform=no';
v_url := v_url||' FROM_NO=' || :PRINT_BLOCK.FROM_NO ;
v_url := v_url ||' TO_NO=' || :PRINT_BLOCK.TO_NO ||' FROM_DATE=' || v_from_date ||' TO_DATE='|| v_to_date ||' NO_DATE=' ;
v_url := v_url ||:PRINT_BLOCK.NO_DATE||' IDENT=' ||:PRINT_BLOCK.IDENT_NO||' REPORT_HEADING='''||V_REPORT_HEADING||'''' ;
v_url := v_url||' COMPANY_NO='||:global.company_no;
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,v_url);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,:GLOBAL.INV_REPORT_SERVER_NAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
v_rep := RUN_REPORT_OBJECT(repid);
IF rep_status = 'FINISHED' THEN
V1:='/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1);
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?server='||REPORT_SERVER_NAME,'_blank');
END IF;
Thanks a lot

Slow running reports often are not the result of a flawed report, but rather a flawed configuration. For example:
1. If you call your reports (from Forms) via the default or inProcess Reports Server, often because startup time is slow, it will appear that it took too long for the report to be delievered. Using a stand-alone Rep Server is the preferred way to do this.
2. If your Forms application makes numerous calls to RRO (RUN_REPORT_OBJECT), this can tend to result in what might appear as a memory leak (although it is not). The result is delayed processing because of the excessive memory use. This problem has been overcome in Forms/Reports 11 by the use of JVM pooling. However in v10 enabling "6i compatibility" mode is the way to overcome the issue. See Note 266073.1
3. If the report runs fine from the Builder and it is connecting to the same db as when you run it from App Server, the issue is unlikely a db problem. However, if you want to look anyway, enable sqlnet tracing.
4. To enable Reports tracing and investigate other tuning options, refer to the Reports 10 documentation:
http://docs.oracle.com/cd/B14099_11/bi.1012/b14048/pbr_tune.htm
Almost forgot to mentioned this one....
If you are using a v11 db with App Server 10, you will probably want to consider reviewing Note 1099035.1 as it discusses an issue related to performance with such a configuration.
Edited by: Michael Ferrante on Apr 10, 2012 8:49 AM

How to create the Hierarchy Structure in BeX

Hi,
We have a cost center IOBJ MD, and our source system does not have the feasibility to create hierarchy to load it. But the business gave a hiearchy structure in flat file, and want to get the cost center hierarchy in bex.
How do we do that ? Please suggest.
Thanks
RK

Hi,
A hierarchy can be created in the system by two ways:
By hand:
     I would recomend to create by hand if the hierarchy has a few nodes or if the hierarchy will stay without changes for long.
     RSA1 --> Look for your infoobject and "create hierarchy". Then, you can create the folders and nodes that you need and dont forget activate it
This option is the quickest and easier, if you could go for it.
Loaded by flat file.
     If the hierarchy has many many nodes or if it will change its values quite often, it will be a good idea to develop stractors, infopackage and so on for loading the information from file file.
There are plenty of information of the Internet about how to do it.
From my own experience, it would be easier to build the extractor in the old version (rsa1old).
I hope that it helps!

How to create the connection pool using jdbc20 driver?

Hi all,
My configuration is WL4.5 SP5 + jdk1.2.2+WinNT+ Oracle thin driver
8.1.6.
It is creating the connections with weblogic.jdbc.pool.Driver, whereas i
want the connections in the pool to be created with jdbc20 driver. This
how my pool definition is defined.
weblogic.jdbc.connectionPool.PoolName=\
url=jdbc:oracle:thin:@<IP address>:<Instance>,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=40,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=5,\
refreshMinutes=10,\
testTable=dual,\
props=user=XXXX;password=XXXX
The reason is I want to use BLOB's. I have a message posted in jdbc news
group with the exception i got. But since this more of a environement
issue i am posting it here.
Any help is appreciated,
Thanks
John

Here is the correct pool definition.
################JDBC20 Driver#########################
weblogic.jdbc.connectionPool.jdbc20Pool=\
url=jdbc20:weblogic:oracle,\
driver=weblogic.jdbc20.oci.Driver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=1,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=dual,\
props=user=SCOTT;password=tiger;server=goldengate
weblogic.allow.reserve.weblogic.jdbc.connectionPool.jdbc20Pool=guest
Hope this helps,
--Kumar
Kuppuswamy Seshadhri wrote:
I think you are missing the port number.
A working example,
Ensuring
- TSNAMES is setup and the service is running
- set ORACLE_HOME variable in setenv.cmd
weblogic.jdbc.connectionPool.theOraclePool=\
url=jdbc:oracle:thin:@IPADRESS:1521:orcl,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=10,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=dual,\
props=user=XXXX;password=XXXX;
weblogic.allow.reserve.weblogic.jdbc.connectionPool.theOraclePool=everyone
Kuppu
"John Galt" <[email protected]> wrote in message
news:[email protected]..
Hi all,
My configuration is WL4.5 SP5 + jdk1.2.2+WinNT+ Oracle thin driver
8.1.6.
It is creating the connections with weblogic.jdbc.pool.Driver, whereas i
want the connections in the pool to be created with jdbc20 driver. This
how my pool definition is defined.
weblogic.jdbc.connectionPool.PoolName=\
url=jdbc:oracle:thin:@<IP address>:<Instance>,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=40,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=5,\
refreshMinutes=10,\
testTable=dual,\
props=user=XXXX;password=XXXX
The reason is I want to use BLOB's. I have a message posted in jdbc news
group with the exception i got. But since this more of a environement
issue i am posting it here.
Any help is appreciated,
Thanks
John

Please can anybody help me how to create the job by using HR_JOB_API?

hi,
actually i tried by using this,but iam not able to do that.
1.should we create job definition before job creation?
2. should we create flexfield segment values before job definition?
3. what are the parameters we have to give mandatatory?
up to my knowledge when we crate job from front end then automatically job definition and job will be created.
but here how to do that please let me know.
and if u have any sample code please send me as soon as.
if jobdefinition and flexfield vlues must be defined before job creation then let me know how to create jobdefinition and flexfield values.

ever thought about attending a training? When you think this is not needed, please read the flex guide, then the hr guide, and then scan some metalink notes on hrms api's.
good luck,
thierry

How to find the DB tables used by the workbook/worksheet

Hi,
I wonder if there is a way that we can query the EUL tables (e.g. eul5_documents, etc) to find out the database tables that are used by a specific workbook.
Please advise and thank you very much,
Yke

There is no "direct" way to do this. If a report has been run at least once, though, you may be able to find out what you want (but it will require a bit of work).
From the EUL5_QPP_STATS table, you can find the workbook (qs_doc_name) and worksheet (qs_doc_details). You can then use the qs_object_use_key value to find the objects, which will give the tables. You could try:
select obj_ext_owner || '.' || sobj_ext_table
from eul5_objs
where instr ((select qs_object_use_key
                from eul5_qpp_stats
               where qs_doc_name = <workbook>
                 and qs_doc_details = <worksheet>
                 and qs_created_date =
                    (select max(qs_created_date)
                       from eul5_qpp_stats
                      where qs_doc_name = <workbook>
                        and qs_doc_details = <worksheet>)),
             obj_id) > 0;This should give you the tables used for the last execution of the workbook.

How to create the sales order using excell sheet thru BAPI's?

Hi Guru's,
In my excell sheet i had 11 sales order details ..now i wanted to create the sales order's sing BAPI's...?
could please guide me step by step.....that would be greatly helpfull to me...
Thanks in advance
Srinivas....

Hi,
follow below steps.
1. Get the excel data into internal table, Build a internal table whcih fields are in bapi same order
2. call the Bapi and pass the table data to the bapi
3. after calling the bapi, call the commit bapi.
then only it will careates.
Regards
Ganesh

How to create Dynamic Internal table in ALV?

Hi all,
I have to create a ALV report based on dynamic internal table. The requirement is that when I enter the months in my selection screen I should get the data relevant to those many months only. For eg if in selection I have given January to March, I should get an ALV output with columns from January to March only.
Please help me with the coding part as I find it a bit confusing.
Please reply immediately.
Regards,
Bhavani.

Hi BHAVANI,
first you have to prapare a field catalog [(see this)|http://help.sap.com/saphelp_470/helpdata/en/52/5f060de02d11d2b47d006094192fe3/frameset.htm]
and than you can use a Method cl_alv_table_create=>create_dynamic_table
I hope that help a little.
Regards Bogdan

How to create the Hierarchial table using ALV.in WD4A

Similar Messages

Maybe you are looking for