How to delete a request with 1millions records in InfoCube

Hi All,
Our extraction from ODS to InfoCube lead to an error (time-out). The total data transfer is more than 1million records. We tried to delete the request but not to avail. Its still there.
Is there other safer way to remove this request, so that we can reconstruct back the data. No errors in data.
Any helps will be rewarded with points.
Thank you.
Regards,
Azlan.

Hi All,
Thanks for the reply. Points rewarded for everyone. The scenario was; there was a time-out during the loading from ODS to InfoCube and the job was terminated. Short dump also was generated. Time-out was set to 7 hrs. We will further investigate what was the cause of the error. So the immediate resolution was;
1) Delete the error RequestID (mark with red icon)
2) Wait until finish
3) Refresh, the request still there. Select and delete again
4) Wait again. Refresh and now its gone.
5) Go back to ODS, reload back the appropriate request to InfoCube
6) Second time round, everything OK.
Hope this will help others.
Thanks everyone.

Similar Messages

URGENT: How to delete the request in version management

Hi,
Please let me know how to delete a request in version management whcih is not released yet.
I have released a request to quality server for an object. After that I was asked to make some changes to that object as there are some defects.
So, i have created a new request and proceeded with the changes. Under that request I have made some changes and activated. but the result is worthless. So, I want to get the result of the object which i have released. i.e. i want to get back only the released request changes.

Hi,
yeah............goto version management......first ull hav ur new request......
below that ull have ur previous request right.............
check the check box of ur previous request.............
and click retrine button.......all changes made in ur latest request ll be retrived back to its previous version.........
come back activete it.............in ur program ull not find ur new useless changes........release it...........
Cheers,
jose.........

How to delete forecast entries with zero current and original qty from a particular forecast set which span across multiple forecasts

how to delete forecast entries with zero current and original qty from a particular forecast set which span across multiple forecasts

Hi,
There is no way to delete those records selectively from front end.
The best possible way is to delete the records from MRP_FORECAST_DATES tables from backend.
Hope that helps!!
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

How to delete the file with space in name

Hi
I want to delete the file "test ex.txt" file.
i run the following command in command prompt.i can delete the file successfully.
/bin/rm -f /mnt/"test ex.txt"
I want to run the command from java.So i am using the following code
String cmd = "/bin/rm -f /mnt/\"test ex.txt\"";
Runtime rt = Runtime.getRuntime();
process = rt.exec(cmd);
The file was not deleted.
How to delete the file with space in name?
Help me

Use the form of exec that takes an array of command + args.
arr[0] = "/bin/rm"
arr[1] = "-f"
arr[2] = "/home/me/some directory with spaces";Or use ProcessBuilder, which is the preferred replacement for Runtime.exec, and which Runtime.exec calls.

How to delete the request in se10

Hi Experts,
How to delete the request in se10 ....plz explain
Regards
Venkat

Hi,
Go to SE10,select the request which you wnat to delete.You will find a delete icon on the top.Select it.
This will delete the request.
Make sure that this request is the one which is under ur ID.If you want to delete the request which is under other ID,it wont allow to delete.
Thanks & Regards,
Suchitra.V

How to delete all mails with one klick?

It's annoying to delete every single mail.
How to delete all mails with one klick, like in the paperbasket?
Thanks

If the emails have been previously deleted (I.e. in the trash folder), tap Edit at the top of the list. You should see a delete all button at the bottom. If the messages are in a standard folder, they need to be handled one at a time.

How to delete photos taken with iPad in iOS7?

Before iOS 7 one could delete photos taken with iPad. Now there does not appear any DELETE button in ios7 ?
WHAT.?

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
iPhoto for iOS (iPad): Delete photos from iPhoto
http://support.apple.com/kb/ph3137
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
Delete Pictures from Your iPad
http://www.dummies.com/how-to/content/delete-pictures-from-your-ipad.html
 Cheers, Tom

How to delete a request in a collapsed and aggregated infocube ???

Hi all,
The situation :
I have a cube that is collapsed, and that has aggregates.
I'm not the one that designed this cube but if my understanding is good, aggregates were created to avoid the duplication of the recordings for the same key of characteristics because of the multiple loading. Actually KFs of the same recording are fed by various chains. Each chain creates a segment for the same characteristic values while updating the concerned KF. The aggregates make it possible to gather all these segments within the same recording by aligning the various updated KF. (that's definitelly not clear to me but...this might be the reason why...)
In the last chain that feeds the cube, right after loading datas, there is an "adjust" step, and then a "collapse" step.
The problem :
Sometimes for this cube (when we have a problem with figuresfor example) I have to run loading chains a second time for the same day. The result of that is obviously that datas are doubled in the cube, so that I have to delete requests in the cube to have them right.
The problem is that, when I try to delete a request, the following pop up message appears : "Request ID xxx is aggregated, compressed or scheduled
Message no. RSM725"
I think I have to "uncollapse" the cube to do that, but I don't know how to do. By the way I'd want to "recollapse" the cube after that (it seems it's necessary so...).
Could someone explain steps to solve the problem, and in the same time, explain the necessity and differencies of creating aggregates and collapsing please ????
That would be so usefull to me, obviously I assign points for helpfull answers !
Thanks !
Fabrice

Aggregates
check this links for aggregates
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e55aaca6-0301-0010-928e-af44060bda32
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbd2d390-0201-0010-8eab-a8a9269a23c2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2299d290-0201-0010-1a8e-880c6d3d0ade
How to doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e55aaca6-0301-0010-928e-af44060bda32
relation between agg and comp
Relation between Rollup and compression.
Aggregate Rollup and Compression

How to delete Transport Request in the Quality system?

Hi all,
I have made some modifications in the update rule and i have transported to QA. And i found the update rule is active.
But in the transports i have transported some irrelevant multi providers along with the update rule. So is it possible to delete the irrelevant multi providers and queries that are been associated in the update rule in the QA.
if to delete let me know how to delete those unnecesary MP been transported in QA.
thanxs
haritha

HI
Unlock the request in se03 and delete what u want in the se09 tcode in the quality. U will find a delete button on the top.
Correct me if i am wrong
Khaja

How to delete the request in Direct Update DSO

Dear Gurus,
I have a situation where I have an invalid characteristic loaded into the Direct update DSO. This is related to Spend Performance Management. This DSO is loaded through a data source with the option Without Archive. So, I cant see any request in this DSO. This DSO will then supply data to another DSO which is standard DSO.
The data Activation job in the standard DSO is failing.
My question is I have to delete the request from the Direct Update DSO and then load it to Standard DSO. I have already repaired the data in PSA.
Your Kind help is greatly appreciated.
-Mohan Kumar

You must be using some fill or delete APIs to fill the data in Direct update DSO.You can't create transformation to fill the data in DIrect Update DSO as you do in Standard DSO.You will not see request number under the manage tab for direct update dso for any load.
Whenever you will fill the Direct update DSO next time,previous data gets deleted automatcally. For Direct update DSO there can only be a Full Update.So just load the data using API's and previous data will get deleted automatically
Edited by: shyam agarwal on Mar 2, 2012 7:48 AM

How to delete the requests in DTP?

hi all,
here i am unable to delete the requests in DTP...
when i am going to delete the request in DTP it simply showing the error:
*cannot lock request DTPR_488BDVJVHQPUUTT3R383DJ55Q OF TABLE 0MATERIAL for deletion*
could you plz help me on this.....

Hi Kiran,
Please go through this thread. Here the same problem has been discussed it detail.
/message/4419400#4419400 [original link is broken]
Following are the steps mentioned in this thread
1. RSA1 -->Info provider >0Material>Right Click-->Display
2. One screen will come , Select the monitor icon to view that (not the one when you go with Manage of 0Material_attr).
3. In the monitor screen you will see Refresh icon , Refresh that
screen , Now the status will change , after 2 -3 refreshes you
will see the request turning to red.
4. Now go back to the manage tab of the 0Material attribute , You
can delete now.
Regards,
Praveen

How to delete the tracks with exclamation marks?

I have just moved about 10 gigabytes of music I don't listen to off my hard disk to an external hard drive. This was to declutter my hard drive and get me down to about 50% free. Itunes now has all the moved tracks still listed with exclamation marks next to them all now. I want rid of these songs from my Itunes view. How can I get rid of these moved tracks now without manually deleting the batches. Annoying that exclamation mark field is not sortable or would be easy to mass delete.
Anyone got a neat solution out there?
Thanks in advance.
Lorne

Yes, but now you have lost all your regular playlists, ratings, play counts, last played dates, non-embedded artwork etc.
Hope you don't miss them. If you do it might be possible to restore an earlier version of your library file and then bring it up-to-date with the free scripts at Doug's site.
An all iTunes, no loss of data approach would have been as follows:
Create a playlist called Found, select everything in Music and drag it into the Found playlist. Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist. You can delete them all with a Command-A to select them and Option-Delete to remove them. You can then delete the Lost & Found playlists.
I normally recommend the scripts as being an easier way to do things that you may want to do again.
tt2

How to delete the Request Number

Hi all,
How to delete the Requset Number in Development Client.Already i transported this Req. Number to Tesing Client.

For what purpose, deleting the request number won't restore your dev system. You can remove the request from the import queues via transaction STMS to insure it will not be accidentally imported.
You can usually only destroy a request in source system if it has not been released and all objects are unlocked, but this is risky in some cases and may cause a loss of information or coherence.
Regards

How does Delete overlapping requests work?

We have a extract which does a full loads into a cube for the current year and a we run this daily. In the process chain we do a delete overlapping requests which I understand will delete the previous requests with the same condition. What happens when the year changes? On Dec 31 we will load 2008 data while the next time it runs on Jan 2 it will load only 2009 data (variant only looks at current year). Will deletion of overlaps delete all the 2008 data it loaded on Dec 31? Thanks.

what is removed depends on the settings of your delete request.
You can use only dtp-name, or dtp name with same selection parameters or with same selection parameter in a certain amount of time.
Take a look at the settings; i found them quite self explanatory.

How to delete an asset with a capitalization date inefaceable and no value?

Hi all,
An asset was created on the wrong asset class. I would like to erase it but this is impossible because of the capitalization date.
Indeed, I cannot change the fields status variant of the capitalization date, it is compulsory.
Furthermore, as this asset was an error, there are no values on it.
I tried to enter a deactivation date, but this is not possible because of no acquisition performed.
Therefore, I would like to know if it is possible to erase an asset even if a capitalization date has been entered in the master data?
If it is possible, how can I do?
Thanks for help

Hi,
This is the drawback in asset master, when you make cap date as mandatory for AS01 transaction.
As a standard practice, cap date gets updated automatically when posting MIGO / F-90 only along with the qty.
In your case, first ask your ABAP member to delete the values from cap date field from table ANLA. (Field Name: AKTIV) for your questioned asset.
Then you can delete that asset with AS06 by choosing Physically delete the asset.
This will resolve your issue.
But if you make your field status as optional to cap date, then you must not got these kind of issues in the future.
Regards,
Srinu

How to delete a request with 1millions records in InfoCube

Similar Messages

Maybe you are looking for