How to Delete Requests for Master Data Target

In BW 7.0 (SP24) I'm struggling with a time dependent master data process chain load using BI 7 load methods (Transformation / DTP). The unique aspect of this is that we are required to start the process chain with an ABAP that deletes the master data. (RSDMDD_DELETE_BATCH). So a "Full" load is necessary. And we have to remove the previous PSA and Requests so that the DTP won't attempt to load (and ignore) the previous PSA.
While deleting the previous PSA request is a straightforward operation in a process chain, there does not appear to be a function allowing us to delete the requests from a Master Data object. (info cube and OSD/DSO only).
Does anyone know of an existing ABAP or Function Module that we can use to delete the existing requests from our object before we run our load processes ?
Many thanks !

Try the FM "RSDMD_DEL_MASTER_DATA".
But before deleting the master data you have to make sure that this master data is not used anywhere i.e, delete all the transactional data first.
U can also try RSDMD_DEL_PARALLELIZER

Similar Messages

Delete DTP OL request for Master data

i have a data source which only allows ful infopackages, once loaded in the PSA use dtp to load in fullload in the master data attributes .... a request shows up green.
now i need to delete the previous request from PSA9 not a problem)
the 2nd run happens psa is reloaded again dtp loads the request but now i got double records in the attributes.
q1, how do i delete over lapping request using process chains, i can delete them manually but i am lazy i rather have a process chain do it for me at 3:0 am in the morning.
2nd ) does it matter to have 2 or 20 same data requests in the master data texts or attributes, instead of table space does it effect roducitivity?

See , I will give an example to understand how delta dtp works
Case 1 : If you run thru delta dtp
Run IP .....req1.....8 reocrds
Run Delta DTP..... 8 records
Run Delta DTP..... 0 records
Run IP.......REQ2......10records
Run Delta DTP..........10 records
case 2 : If you run Full DTP
Run IP .....req1.....8 reocrds
Run Full DTP....... 8 records
Run IP.......REQ2......10records
Run Full DTP.......... 8+10 records = 18 (since it's full it extarcts all the requests from PSA)
If you load 10 times using delt/full dtp obviously you will have 10 requests in attribues/texts of md
but it will add only new / changed record to the MD tables ..
load 10 times you will see requests - goto SE16 - /BIC/PMDNAME - execute - will show only unique entries
Hope it's clear!

How to Delete a Failed Master Data Delta Load ??

Hi all,
   The Delta update load for 0VENDOR_ATTR is failed. I have changed the TOTAL traffic light in Status tab of Monitor to 'RED' and clicked 'yes' on the next pop-up screens.
     After activating the Transfer Rules, I have tried to load the Delta again and it failed with 'Update mode R is not supported by the extraction API
R3 (Id) 11 (No.)' . The long text says 'The application program for the extraction of the data was called using update mode R . However, this is not supported by the InfoSource.'
   How can I fix this problem so that I could load delta, PLEASE?
Thanks.

Hello Venkat,
How r u ?
I just found this; check all the Threads under the topic
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-bw/update-mode-r-is-not-supported-by-the-extraction-api-949241
Have a look at OSS 427812.
Best Regards....
Sankar Kumar
+91 98403 47141

QM action not allowed for DTP requests in master data and Text tables

Hi,
I have a master data object load request which has failed, returned error in st22 and job finished.
BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
How can I force QM status to red so that I can move on?
Running NW2004s BI (7.0) Patch 15.
I searched for this question but there is no answer
Thank you

Folks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Unable to delete bad request in ODS DATA TARGET

Hi Experts,
I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
Please tell me how to delete request in red.

Hi,
Try to do the following:-
1. Note that bad request number
2. Go to SE16
3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
4. Open table RSICCONT. There will be one entry for that request . Delete that entry
5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request depending on number of data packages in that request .Delete all those entries
Once these entries are deleted , the bad request will be automatically deleted from the ODS.
Regards,
Satya

How to do Stastical Setup for Master data Loading

Hi All
Thanks a lot for all guys,who are helping me a lot.
I want to do stastical setup for Master data of sales order.I know how to do for transaction data.
But what is the procedure for MAster data in SBIW-Tcode.
Regards
Balaji

Hi,
Actually first we should load data to Master data table and then to Transaction load data.By this reporting performance will be good.Right?
Actually this will decrease the time of transaction data loading .So it improves the loading performance , not reporting performance.
Now I got a doubt from where this Master Data is been loading? and how to load this data.
2LIS_11_VAITM and 2LIS_11_VASCL are the DS for Transaction data , not for master data.To load the master data, first of all find out the master bearing characterstics in the data target.And then search for teh DS of master data in R/3 with tcode RSA6 .You will use characterstic(info object) as the search option here.
For example 0materail is the Master characterstic.
And you can see the DS for this Characterstic in RSA6(if it is not there, you have activate it from RSA5)
0MATERIAL_ATTR
0MATERIAL_LGEN_HIER
0MATERIAL_LKLS_HIER
0MATERIAL_TEXT
With rgds,
Anil Kumar Sharma .P

How to create process chains for Master Data?

I need information on " how we can create process Chains for Master Data"

Hi Sachin,
http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
and also Modelling aspects in process chains (ppt)
https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
Hope this helps.
Srini

Delta and Full process chain for same master data target.

Hi Friends,
Can I do full update and delta update through process chain for same master data target and from same source ?
Regards
shekar reddy

Hi Sriram,
why you want to load full and delta for same master data object?
you can achieve this but make sure that you select repair full option for full load IP.
you have this option in scheduler in menu bar
Regards,
Venkatesh

How can I upload text master data for attribute-only Charactertic?

I can't create infosource for attribute-only Charactertic via direct update from Infoobject, because attribute-only Charactertics you can't choose from available infoobject.
How can I upload text master data for attribute-only Charactertic?
Thanks!

Hi roberto,
I soloved the problem. I can input the attribute-only char directly in the text box instead of choosing from list of infoobjects, but I still can't find the char in infoobject selection dialog even using search.

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

DTP for Master data

Hi Guys,
How to extract master data and hierarchies from ECC into BI infoobjects?
Do we follow the same procedure for loading master/hierarchy data as for transaction data - i.e. Load into PSA and then create Transformations and DTPs to load into infoobjects? If so, what is the best approach as far as Full/Delta loads.
1. Is it ok to do a full load into PSA (using infopackage) and then do a full load always (The process chains for master data would be running nightly).
or
2. Should we have 2 infopackages (full and delta) into PSA and then multiple DTPs. (The process chains for master data would be running nightly).
Regards.

Indicator: Only Get Delta Once
Source requests of a DTP for which this indicator is set are only transferred once, even if the DTP request is deleted in the target.
Use
If this indicator is set for a delta DTP, a snapshot scenario is built.
A scenario of this type may be required if you always want an InfoProvider to contain the most up-to-date dataset for a query but the DataSource on which it is based cannot deliver a delta (new, changed or deleted data records) for technical reasons. For this type of DataSource, the current dataset for the required selection can only be transferred using a 'full update'.
In this case, a DataStore object cannot usually be used to determine the missing delta information (overwrite and creation of delta). If this is not logically possible because, for example, data is deleted in the source without delivering reverse records, you can set this indicator and perform a snapshot scenario. Only the most up-to-date request for the DataSource is retained in the InfoProvider. Earlier requests for the DataSource are deleted from the (target) InfoProvider before a new one is requested (this is done by a process in a process chain, for example). They are not transferred again during the DTP delta process. When the system determines the delta when a new DTP is generated, these earlier (source) requests are seen as 'already fetched'.
Setting this indicator ensures that the content of the InfoProvider is an exact representation of the source data.
Dependencies
Requests that need to be fetched appear with this indicator in the where-used list of the PSA request, even is they have been deleted. Instead of a traffic light you have a delete indicator.
Get Data by Request
This indicator belongs to a DTP that gets data from a DataSource or InfoPackage in delta mode.
Use
If you set this indicator, a DTP request only gets data from an individual request in the source.
This is necessary, for example, if the dataset in the source is too large to be transferred to the target in a single request.
Dependencies
If you set this indicator, note that there is a risk of a backlog: If the source receives new requests faster than the DTP can fetch them, the amount of source requests to be transferred will increase steadily.

No of requests in a Data Target

Hi
How/Where i can see the count of Requests loaded in a Data Provider in BI 7.0
Thanks

Hi,
RSICCONT is table used to check the requests in the Data Target level ( Cube and DSO) and also if you are not able to delete the request from the data targets in PRODUCTION (Sometimes you will not have authorization for deleting Request) by going to the mentioned you can delete the request.
Regards
Ram.

PSA request updated to data targets but not showing

Hi All,
It must be a basic question for BW support activities. However appreciate if someone can help me out as I am unable to find similar post.
In PSA the request shows it successfully updated to a data target but I can't see the delta request in the data target (Cube)- Manage.
This is a delta request. Can someone tell me how do I load the data back in to the cube? Do I need to delete the request from cube and run it again but I guess the deltas will be lost.
Help. pls give me all the steps in detail how do I fix this.
Thanks,
B

Hi,
There are two options.
1. at PSA find how many records are exist for your request.
Note/down load the records into excel if you have countable. As my guess delta records might be less.
Later thru repair full request you can load to PSA and then to target.
AT repair full request we need to use proper selections to load required records only.
2. PSA Request must be stored at back end table.
in that table if we can change update further status then we can do the psa request to target thru delta dtp.
Thanks

Adjusting the SID table for master data infoobject

Hai
Im trying to activate one master data infoobject. But it says the error like below
The SID Table /BI0/SBBP_DELREF must be converted incompatibly with an activation of characteristic 0BBP_DELREF (changes to the key in the table). Table /BI0/SBBP_DELREF contains data. Parts of this data were lost in the conversion.
or
Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/SBBP_DELREF.
So how can i adjust the SID table for this .
pls tell me
kumar

Hi,
you'll have to delete ALL the master data for this IObj. Therfore you'll have to
delete all data in ALL the IObjs using 0BBP_DELREF (ODS, CUbes and characteristics).
Then activate your IObj. You will go through some step which I explained in the
following thread
Re: Urgent...Company Code lenght has been changed
Extract:
1. Delete 0COMP_CODE master data.
- get objects list using 0COMP_CODE with loaded data: I suggest to delete
master data via AWB (right click the characteristic). If it can't be deleted because
it is used display the deletion log (via AWB or tx SLG1 / RSDMD, MD_DEL).
- delete loaded data for the list above.
This should not be too much since you are in DEV.
2. change 0COMP_CODE length
- change the length to 4;
*- Activate your IObj. You'll get a popup log, validate. Activate despite warning and
errors. You will get An error message, validate.
You should get an horizontal pane with the activation log. Read it for your personal culture but if you don't have time then don't...
- Next the system will prompt to convert the tables: answer YES. The system will ask to schedule the table conv. in the background, go4it.
- next is the SE14 screen for the P table: Hit Activate and adjust (Direct
execution, or in the back as you wish). Answer yes to the mass processing
question and yes (again) for request adjust online. Your table should be converted successfully.
- go back twice from this screen (leaving SE14 tx and return to RSD1). reread the update log if you wish.
- repeat from the *- above... it will perform the very same for all other P tables of IObj using 0COMP_CODE and the 0COMP_CODE S table.
Your IObj is reactivated again. So should your ODS/DSO objects (check activate for example). Cube didn't need to convert tables since the MDID is note posted in any table of a cube.
Please note that once your IObj is in revised version you can perform the same via the menu extras / database table / convert all (see my previous post).
Now you have to evaluate the task. Of course that is a work to fix the mistake.
Depending on when it has be changed it may be worth to restore your DEV sys with a backup (loose work performed from the backup until now).
hope this helps... otherwise, revert.
Olivier.

How to Delete Requests for Master Data Target

Similar Messages

Maybe you are looking for