How to design an iPhone app that uses both Portrait and Landscape in Flash CS6

So I have created an App that has a different menu when it is held portrait, but changes when held landscape. I can get the navigation to work, However I am unsure how to design landscape pages inside Flash?
My stage is set to the standard 640x960 air for iOS, which gives me perfect portrait pages, But when I tilt my phone to landscape the screen obviously changes, and it looks weird. Im hoping someone can tell me how i can get this view inside Flash, while still having the portrait screens too?
I want to have both Portrait and Landscape in the same app, and am currently so confused how I can design this inside flash?
I hope this makes sense, and that someone could throw some help my way!

you can change the display depending on stage orientation but it doesn't make sense to "..swap the stage orientation between screens".
to change the display, use a StageOrientationEvent.ORIENTATION_CHANGE event and listener:
stage.addEventListener("orientationChange", orientationChangeF);
function orientationChangeFr(e:StageOrientationEvent):void{
trace(e.afterOrientation.toString());

Similar Messages

How do I convert a FrameMaker file containing both Portrait and Landscape pages into PDF?

I have recently converted to FrameMaker 9 and Acrobat 9. In the FrameMaker manual I am creating, most of the pages have Portait orientation, but some have Landscape orientation. However, when I convert the manual to PDF using Acrobat Distiller, the Landscape pages become Portrait. This wasn't a problem when I converted the manual into PDF in previous versions of Acrobat Distiller, it appeared after I installed Acrobat 9. In other words, the FrameMaker file has worked before. I have also tried this on three different computers to make sure the computer is not the problem. Does anybody have any ideas that I could try to make this work?

Jorunn, did you ever resolve this problem? If not, I've got a solution for you.
In FrameMaker, select the book you want to create a PDF of, click File > Print, and select Adobe PDF as your printer.
Click Properties and make sure you have the selections you want.
Back on the Print Setup dialog, leave the Paper and Orientation as both Letter and Portrait respectively.
On the Print Book dialog, select Print to File and browse to the correct location. Make certain to save this as a PostScript file (name.ps) and at the Safe Book As field, you want Single File selected.
Again on the Print Book dialog, click the checkbox for Generate Adobe Data and click PDF Setup. On the PDF Setup for Selected Files dialog, at the PDF Job Options, select Press Quality or make the appropriate choices for your situation for Settings, Bookmarks, Tags, and Links.
With Adobe Distiller open, File > Open and browse to the .ps file you indicated earlier. Also verify your Default Settings for the PDF are correct. When Distiller is finished, you can double-click the PDF file to open it and check that your portrait and landscape pages show correctly.

Multi-folio app with both portrait and landscape orientation

Can we create a multi-folio app that contains both portrait and landscape orientation folios?

A multi-folio app can have any mix of portrait, landscape, or dual-orientation folios in it. The only requirement is that for a specific folio all articles in it share the same orientation setting.
Neil

I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?

I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?...HELP!!!

jedimaster Master wrote:
how do I do both?
By choosing SET UP for the "automatic" item at the bottom of the list I referred you to earlier

Both Portrait and Landscape format using SMARTFORMS

Hi All,
I have a requirement where i have to print few pages in Portrait and few Pages in Landscape using Smartforms.
Now my question is wheather it is possible using smartforms and if possible how can i build the logic.
As i have to dispaly the first page in portrait and second page in Landscape format.
Thanks in Advance !
Thanks
Shashikanth

Hi,
You can do the portrait/Landscape settings for each page. Click on the Output option of the page and there you will find the radio button for portrait and landscape
Thanks
Arul

How to re-install iPhone apps that have been deleted on the iPhone?

Hi,
I've installed a number of iPhone apps onto my iPhone via iTunes. I've then deleted some of them on my iPhone. I now want one of the deleted apps back. It's still visible in my iTunes Applications, as well as in Music/iTunes/Mobile Applications.
How do I get it re-installed into my iPhone? So far I've tried:
- redownloading the app from the iTunes store, and selecting Buy and pressing OK to re-install
- double-clicking on the .ipa file in Music/iTunes/Mobile Applications
After each of the above I resync my iPhone. But still the app won't re-install on my iPhone.
thank you,
...ben

Yeah, figured it out, and was just about to post what you said. But you were too quick. Thank you!
...ben

How do i fix iphone 5c that is automaticaly off and on?, How do i fix iphone 5c that is automaticaly off and on?

How do I fix iphone5c that is automatically off and on?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

How to properly configure a home network using both Mac and PC computers

Is there a book or set of guidelines that can tell me how to properly configure (exact specifications) my computers in a home network? Here is what I am trying to do and using:
1) Three computers: iMac (late 06 ver), Macbook (newest version), Dell laptop. The two Macs are using Leopard and the PC is XP.
2) Bellsouth modem which feeds into the Airport Extreme Base Station (AEBS)
3) The AEBS has a USB hub which is connected to a external hard drive and two inkjet printers. A third laser printer/scanner/fax machine is connected to the AEBS via ethernet.
4) All three computers use a wireless connection to the AEBS.
I would like the following:
1) Have a secured and password driven network - don't want outsiders connecting to the nework without permission.
2) All computers to be able to access the USB printers and ext HD.
3) The two Macs to read/write to each other with password access
4) The iMac to have read/write capabalities over the PC via VSFusion or Bootcamp if possible.
Currently, all three have Internet access via the AEBS and can print on the ethernet printer. Both Macs can see the Bonjour USB printers and print (however they to do not display on the AEBS configuration display utility and neither does the ext HD). The USB ext HD is shown on the iMac desktop and I have access to it, but does not display on the MacBook. I have not checked if the PC sees the external HD and it really does not matter if it ever does, although it would be nice.
I am hoping that there is some standard configuration that I can "cut and paste" that is generally used to allow a home network to share resources while still being secure.
Any advice and help is greatly appreciated.
Thanks,
Andrew

Andrew,
What you would like is fairly complicated so this will probably be a lengthy post, but hopefully I can assist you.
As others here have pointed out, networks can vary widely, but the best networks have one element in common: planning. The first thing you need to think about is how you would like all of these systems to cooperate. For instance, do you want one of the machines to serve files to the others and be a central repository, or are you just interested in having them share documents on occasion so that you don't have to carry around, say, a USB key all the time? That said, here is a basic list of things I think you should look into.
1. Network Basics
First step is to get your local network set up. I'd go for WPA or WPA2 wireless security as they are relatively strong standards and you can use human-readable passwords. Additionally, unless you have an explicit need for someone outside your network to initialize a connection (Windows' RDP for instance), do not allow any passthroughs or port redirects on your AEBS.
2. Network Topology
Decide how you want computers and networked devices to identify themselves and their relative locations in the network: in short, do you want static ip's or dynamic ip's? Most of the time, static IP's can be assigned on a DHCP router, the trick is to assign the statics higher than your number of devices (or lower on some routers - for instance Linksys routers start DHCP at 192.168.1.100 but you could have statics from 192.168.1.2 to 192.168.1.99). For instance, it is impractical to set a laptop to static because I'm often in coffee shoppes and other environments that assign via DHCP; on the other hand, it's a good idea to have a printer be static so that you always know where to find it. So, I have 10.0.1.x network (default on AEBS), and the printer is 10.0.1.24, since the likelihood of my encountering an IP conflict with 4 computers on the subnet is virtually zero. If you configure a static device behind your AEBS, defaults are usually
Default Gateway 10.0.1.1
IP Address 10.0.1.(your choice)
Subnet Mask 255.255.255.0
3. File-sharing.
3a) Mac OS X has a built-in SMB/CIFS (Windows file & printer sharing protocol) client, and a basic SMB [samba] server can be enabled in the sharing preference panel (enable file and/or printer sharing). Windows XP can use these shares, but must authenticate. For that reason, you may not be able to see your shares in the Network Places browser, however you should be able to get to them by mapping the network drive (tools menu) or executing RUN with \\computer.name\share.name. You will then be able to type in your credentials. I would also suggest relatively simple names for the Macs in question (set in Sharing preference pane). Typing Andrew's-iMac-G4 in every time you want to find it will get irritating after a while to say the least, especially if you need to troubleshoot.
3b) The reverse works similarly. You can Connect to Server... from Finder to get to the Windows shares. To do this you must have Windows File and Printer sharing enabled (most easily through the Network Setup Wizard in Control Panels - Use Classic View). It's really easy if your account names and passwords are identical on the Mac and PC, because when loading user profiles, the Mac will generally automatically try to authenticate against the Windows machine with your Mac logon credentials. (Windows seems to do this against the Mac as well) You can write an Applescript or there are some PLIST modifications you can make to mount Windows shares at login.
4. Printing
I'm not exactly sure what you had in mind here since I'm not sure what's connected to which computer or directly to the network. If it is possible, I personally find putting my printers directly on the network to be the easiest thing. Especially if printing large PDF or graphics files, the spooling on the host system can really slow the computer down, and slow down printing. For example, I used to have a laserjet on a Windows box and had to print a very large file. Going through a Win print server, it only printed a page every 30 seconds, but when I got a jetdirect adapter, the whole thing was done in under two minutes. If you have HP Printers, I would recommend the jetdirect print servers (I have used with both a laserjet and a supposedly unsupported color inkjet).

How do I export a PDF that contains both English and Thai to Microsoft Word?

My PDF file has both English and Thai language content. When I export it to Microsoft Word, the Thai words are missing. I am using Acrobat XI Pro and Windows 7 Professional 64-bit.

Hi Teng,
Try changing the pdfmaker preferences and 'embed all fonts' as per the screenshot below:
Regards,
Rave

How do you close iPhone apps that don't seem to have a close button?

How do I ensure that an application is fully closed out?
IM+ is an example but I would like to know in general. IM plus somehow runs in the background but sometimes I want to disable it completely I"m not sure how. Same goes for facebook or safari even. My concern is that I thnk the phone slows down when too many things have been opened. Is there a way to fully force all applications closed short of rebooting?
Thanks.

3rd party apps do not run in the background on the iPhone. Apps like IM+ that 'seem' to run in the background do not - your chat account is kept active by the server (not the phone) and/or push notifications via Apple's push notification server are used to alert you that there is server-side activity for the app.
So, you would just need to exit the app, and if you want to turn off notifications, use Settings > Notifications.
Also, note that you can force-quit an app - press and hold the sleep/wake button until you see the power-off slider, then release the sleep/wake button and immediately press and hold the home button for ~6 seconds, until you're returned to the home screen.

How to configure PlugAccts that use both balance and flow type source accounts?

In this application I am maintaining, there is a plugAcct that is account type liability. The source accounts for this plug account are revenue, expense, asset, and liability (approx 30 accts). The data in the source accounts balances perfectly by entity. That is, the credits exactly equal the debits in the source accounts, so the plug account should net to zero at the base entity level (value dimension = elimination). However, there is a balance in the plug account at the base entity level (value dimension member = elimination). What is happening is that when eliminations are calculated they are using periodic values for the flow type accounts. The balance in the plugAcct is equal to the prior months YTD total. So only the current month activity is being eliminated. I changed the account type for the plugAcct to revenue (from liability) and tried again. This did not resolve the problem. There is no custom consolidation logic in this application. The scenario is configured for YTD numbers (it is an Actuals scenario). Balances are always loaded YTD. And yes it is fully consolidated.
Any ideas?

Set up your mac.com account again on devices. Turn off Mail and other data syncing with this account on your wife's devices for data that you want to keep separate. Then set up a second ("secondary") iCloud account on your wife's devices to sync Mail.
If you already set up a separate iCloud account on your wife's devices, on her devices go to Settings>iCloud, tap Delete Account, then sign back in your your mac.com ID. Turn on the data you want to share with this account across all devices; don't turn Mail on. Then go to Settings>Mail,Contacts,Calendars>Add Account>iCloud and enter her separate iCloud credentials and turn Mail to On.
The only downside to this approach is that her email will be fetch, not push email. Push email is only supported in the main ("primary") account, not a secondary account.
The limitations to be aware of with secondary accounts are that only the primary account can be used for Photo Stream, Bookmarks, Documents, iCloud Backup and Find My Device. Also, push mail only works for the primary account; secondary account mail is fetch.

How to link a OCI app for running both 8i and 9i

Hi,
I have an OCI application built on 9i and linked dynamically with libclntsh.so . When I run the program on system with installed 8i, library loader was looking for libclntsh.so.9.0, which oracle 8.1.7 does not have.
Does anyone know why the library loader looks for libclntsh.so.9.0 instead of the libclntsh.so which it is linked to?
Can anyone tell me how to build a application that will run on either 8i or 9i?
Thanks.
Zhigang

Three years later, same problem with different versions ;)
I need my application to run with Oracle9 and Oracle10.
I link on Solaris with Oracle9, and the executable points to libclntsh.so.9.0 instead of libclntsh.so.
# ldd myapp
libclntsh.so.9.0 => /u01/app/oracle/product/9.2.0/lib32/libclntsh.so.9.0
As libclntsh.so.9.0 is not delivered with Oracle10, the application won't run unless a symbolic link from libclntsh.so.9.0 to libclntsh.so is made.
Is there a way of solwing this issue?
Thanks in advance!
Thomas

Music volume keeps dropping on my iPhone 6 when using both headphones and AirPlay

when playing music on my iPhone 6, sometimes the volume will drop for reason at all. Fortunately it doesn't happen too often, but when I'm driving and it dones happen, I can bearly hear it. It corrects itself completely at random too. Please help, it's an annoying problem.

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

How do I export from PDF to Word when PDF has both portrait and landscape pages in it?

Most of the pdf is in portrait but a few are in landscape in the middle of the document and it totally screws up the rest of the document. Help! AND the portrait page size is 8.27 x 11/69.

Looks like you have A4 pages. I would copy the PDF and then rotate the landscape pages (or portrait) individually (use the tools, not the view rotation) and then do the save to DOC or DOCX. That might do what you want. I would have expected it to notice the orientation, but I guess not. You did not mention the version of Acrobat. If you have not done the updates, you may want to do those first. Your issue may have been address with the updates.

Logging with log4j in a Web app that uses TopLink

The deployment engineer in my company is reporting problems with our first Web app that uses both log4j and TopLink. Apparently TopLink is failing to initialize correctly when log4j-1.2.8.jar is deployed to the WEB-INF/classes directory within the Web app.
I know that 9iAS's Enterprise Manager uses an older version of log4j and I wonder if TopLink uses an older version too.
Are there any known problems when using log4j 1.2.8 with TopLink 9.0.3?
Thanks,
Al Margheim

Unfortunately, when I asked the deployment engineer for more information on the problem, he couldn't provide any, and since he moved the log4j library out of the application's WEB-INF\classes directory he can't reproduce the problem (whatever it was).
Based on a variety of factors (including your response) I suspect that the people who encountered the problem misinterpreted the cause.
If I can get him to put the log4j library back in WEB-INF\classes and get more specific information about the problem, and it still looks like a conflict between TopLink and log4j, I'll post the errors here.
Thanks,
Al Margheim

How to design an iPhone app that uses both Portrait and Landscape in Flash CS6

Similar Messages

Maybe you are looking for