How to display PLSQL source type on the form?

Item type text field with Item source type PLSQL . The PLSQl is working properly because I can see it in the session state on the form but it wont display iin the item on the form itself.

Hello,
>> The PLSQl is working properly because I can see it in the session state on the form but it wont display iin the item on the form itself.
Is your code include a return statement?
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Similar Messages

How to find out which type of the driver is used in our application?

Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
Phoeniox

Hi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
               for(int i=0;i<drivers.size();i++)
                    Driver driver = (Driver)drivers.get(i);
                    String driverName = driver.getClass().getName();
                    System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath

How to add a document type for the residence status GB in infotype 48

Hi Team,
How to add a document type for the residence status GB in infotype 48.
Please answer this at the earliest.PFA screnshot.
Thanks
chris

I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

How to display my country flag on the task bar in osx mavericks?

How to display my country flag on the task bar in osx mavericks?

System Preferences > Keyboard > Input Sources
Checkmark the box beside "Show Input menu in menu bar".

Display a Source Type field at Quick Sales Order Form

Hi Friends
i'm trying to display the Source type field (Internal Or External) at Quick sales order form
the field is not appears at LOV of folder
at Personalize at new form instance change the property of displayed for source type to TRUE and adjust the X andY coordinates but after all that also the field is bot displayed
Any one can help
Regards
Amr Hussien

Hi Friends
I got it :)
at the folder you have to add the Shipping tab , place the cursor at any field of it and click at show field the source type will appear
Regards
Amr Hussien

How to display properties of dimension on the input form and report in bpc

Dear Expert,
Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number.
thanks so much
hungth

Hi Hungh,
If your are using BPC 10 with EPM add in client, you can use the function:
EPMDimensionProperty ()
This function retrieves the properties of a specified dimension in a specified cell range.
Thanks, Safa

How to assign a pricing type to the pricing procedure ?

Business Scenario : When the prices change from the time the order is taken to the time the invoice is created, how can setup the system to handle the changes automatically ?
I would like to know How to create a pricing type and How to assign a pricing type to the pricing procedure so that I can use the 'new pricing document' function in the sales document and 'Update prices' on the condition screens in the Billing document.
Thanks for your input in advance.
Oscar

Hi !! Oscar,
1) For pricing type definition you would require the help of a developer.
2) However, most of the commonly occuring requirements are supplied with standard SAP.
You can assign a pricing type to pricing procedure as follows:-
IMG>S & D >Basic Functions>Pricing>Pricing Control>Define & Assign pricing procedures>Maintain pricing procedure> Here, locate your pricing procedure , in the fourth coloumn using the drop down list, you can assign a pricing type to the pricing procedure.
Now you can use the 'new pricing document' function in the sales document and 'Update prices' on the condition screens in the Billing document !
Regards,
PATHIK
Message was edited by:
Pathik Pandya

How to display multi-channel image in the 'proxy'?

There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
int nSpotChannel = gChannelCount - 4;
PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
for(int i = 0; i < nSpotChannel; i++){
       if( i != (nSpotChannel - 1) )
             overlay[i].next = overlay + i + 1;
       else
       overlay[i].next = NULL;
       overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
       overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
       overlay[i].colBytes = 1;
       overlay[i].r = 230;
       overlay[i].g = 161;
       overlay[i].b = 174;
       overlay[i].opacity = 255;
       overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
pixels.pixelOverlays = overlay;
Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
If you have other solution, please tell me. Many thanks!

This is what I've been doing - was just curious if there was a way to see a more cohesive image.
If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
- Morgan

How to display language key (0LANGU) in the query for BW report

Hi,
Can someone tell me how to display language key (0LANGU) in the query? I want to display which language (English or French) is used for material description in BW report. Thx.

hi,
check if the infoobject is kept as lang dependent or not for material text, else you need to create a masterdata attribute with text and lang keys and do corresponding mapping, so then it can be displayed in your report
regards
laksh

How to display a view which contain interactive form in an external window

Anyone know how to display a view which contain interactive form in an external window?
I managed to display the view in an internal window with the following code:
IWDWindowInfo windowInfo = (IWDWindowInfo)wdComponentAPI.getComponentInfo().findInWindows("PdfReportWin");
IWDWindow window = wdComponentAPI.getWindowManager().createWindow( windowInfo, true);
For external window, I tried this method : wdComponentAPI.getWindowManager().createExternalWindow(String URL, String title, boolean modal) but there are no parameter for view name?
Maybe this is not the correct way, really appreaciate if anyone can help.

Hi,
            U need to the following
           1.Create another window
           2.Create a view in it tat contains Interacive form element.
           3. call this window dynamically thru the first window by creating a context element of IWDWindow type
The code may help:
IWDWindowInfo windowInfo =(IWDWindowInfo) wdComponentAPI.getComponentInfo().findInWindows("SearchEmpwind");
      IWDWindow window = wdThis.wdGetAPI().getComponent().getWindowManager().createWindow(windowInfo, true);
      window.setWindowPosition(WDWindowPos.CENTER);
      window.setWindowSize(400, 250);
      window.open();
      wdContext.currentContextElement().setEmpSearchWind(window);
Regards
Ishita

Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form.

Hi
Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form?
The second source has a huge list of company names that can be narrrow by email work.
background:SP 2010 and Infopath 2010
CRISTINA&amp MICROSOFT Forum

I'm not sure if I understood your question clearly but here is a good resource on how to get attributes from "GetUserProfileByName" web services:
http://blog.mangroveweb.com/pre-populating-an-infopath-from-with-mysql-data-using-a-net-web-service/using-sharepoints-getuserprofilebyname-web-service-to-retrieve-ad-account-information/
Regarding filtering dropdown list then this could be done by applying form on-load rules.
Hope this helps

How do I make a button onj the form which will submit and send the pdf as an email?

how do I make a button on the form which will submit and send the pdf as an email?

You can set up a button with a "Submit a form" action and use a mailto type URL to specify the email address you want the forms sent do. If you want to send the entire PDF, select that option and not FDF or anything else. The mailto URL should not include any spaces and the "mailto" part should be lowercase, like:
mailto:[email protected]
This will attempt to initiate an email using the users default email client. If the user does not have one set up or there is some other problem, the email might not get initiated. If it needs to work with Reader versions prior to 11, then the form needs to be Reader-enabled, which you do in Acrobat 11 by selecting: File > Save As Other > Reader Extended PDF > Enable More Tools

How to use PO message type to output 'Form' as PDF file

Dear experts,
I am working for a topic of how to use PO message type to output 'Form' as 'PDF file', and save to external file system automatically.
Any one familiar to this topic, please kindly give me some guide, thank you!
Regards,
Joyce

Hi,
Go through the program RSTXPDFT4 (Converting SAPscript (OTF) or ABAP List Spool Job to PDF), you will get some idea. Using this program you can convert spool into PDF file.
-Alpesh

How can I format a field in the form creator?

How can I format a field in the form creator? It's putting the same text in all the fields within a table. I want each field within the table to have different text. As soon as you click out of the table, all the text is the same.
I even changed the fields from a text box to a drop-down list so a person can make their selection, which will be a quantity from 0-9. There are two of these such fields. You make your selection in each, click off the table and both fields show whatever I selected in field 1. The original Qty I selected in the bottom field was a 5 but it changed it to whatever is in the top field on it's own. I've added a screen shot.

This behaviors usually happens when you create the fields but a copy paste command from one of the fields. The copy paste command assumes that your intentions is to maintain a copy of the field in two separate locations (e.i, a form field "company name" printed in each and every page of a multi-page form document.
Go to the properties fields of each field and make sure to assign unique form field names.

How to attach a PDF file TO the form so that recipients can access the file as a resource?

How to attach a PDF file TO the form so that recipients can access the file as a resource?

Sorry we do not support this. What you can do though is add a Formatted Text element and add a link to a PDF. To insert a link add some text, select the text and right click on the text (or look under the Insert menu in the top right of the scene)
Gen

How to display PLSQL source type on the form?

Similar Messages

Maybe you are looking for