How to do partial Billing from Sales order

Hi Sap Gurus,
Could any one help me out how i can do partial billing from a sales order. I have 5 line items in SO and only want 3 items out of that to be billed so my sales order should be stated like partially billed.
Please give some suggestions
Cheers
Edie

Hi,
You may create a status profile to put "Billing Block" for Sales Doc type at header level.
T.Code: BS02/ OBIS
This will automatically put a Billing-Block at the items levels, as soon s you will create and save Order.
Alternatively, if you are not willing use to Status-Profile, Goutham has already explained the process* in his post
Best Regards,
Amit.
*Note: Relevant Copy-control settings must be maintained in VTFA for Target Billing from Source Doc.

Similar Messages

How to find open item from sales order

Hi all,
my requirement is one sales order is there partial delivery is happened for some materials,take exampla matarial X has 100 quantity in sales order pratial delivery 50 is done, iwant to know the open order qunatity for a material X from sales order.
regards,
kishore.

hi kishore,
in the partial delivery scenario, the sales order items always be a open.
you can see the document flow of that document by using Tcode : VA03 then click on'update document flow' icon. then system will show the status.
i.e sales order is 'being processed'
outbound delivery is completed
billing document is completed
and accounting document in not cleared.
if it is helpful, then give me the points.
Regards,
somu.

How to trigger an Idoc from Sales order creation and change

We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
Follow the below steps:
1. Go to NACE transaction
2. Select V1 application and select OUTPUT TYPES
3. Select the required output type and double click on Processing routines.
4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
5. Save it.
message type ORDERSP in the distribution model (BD64).
Follow the below steps to configure the condition records:
1. Go to NACE
2. Select V1 application and select CONDITION RECORDS
3. Select the requred output type and click on Condition records
4. Selection screen will be displayed.
5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
Sales doc type = OR
Funt = SP
Partner = blank. It means there is no restriction on partner numbers.
Medium = A
date/time = 4
Lan = EN.
Note: partner is left blank means, the sales order of type OR can be send to all partners.
6. Save it.
We also done ALE configuration.
We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
Kindly suggest the solution.
Regards,
Sharad Dixit

Hi ,
Please check the total error description and diagnosis as below :
InVa02 enter SO go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
Please paste the diagnosis .
Thanks and Regards,
P.Bharadwaj

Partial billing against sales order

Hello gurus,
is there anyway to set up partial billing. By partial billing I mean if I have a sales order for 400 pieces of one item, can I make a billing document for 200 pieces of such item save it and then come back to do another billing document for the 200 remaining pieces? Can this be done through VF01? How can this be set up?
I looked for something similar in various threads but couldn't find an answer.
Thank you for your help.

Hi,
Goto VTFL.Select you valid combination.
Click on item.Select yout item category there.Goto details.
Select the Pos/neg quantity field as "+".
Maintain the billing quantity as "A".
Maintain VBRK/VBRP as "001".
Save.
Goto VOV7 and select your item category.Details.
Select completion rule as "B" and billing relevance as "F".
Save.
Pls go through the follwing threads that are posted by me earlier.
[Invoice split|Re: Invoice split]
[Splitiing of invoice|Re: Invoice split]
Regards,
Krishna.

How to Skip weight data from Sales order for Higher level BOM material

I have maintained a BOM at Item level with item category group LUMF.
And the higher level item is not subjected for pricing and costing. While creating the higher level Item I did not maintain weight for it. Now when I create a sales order due to the incompletion log system is asking to maintain Weight details for higher level item also.
But I donu2019t want to maintain weight for that item nor I want to remove net weight and gross wt from incompletion log.
While creating higher level material with material type FERT and I have maintained LUMF and all things are normal. Also tell me do I need to select any different material type or do I need to go for different settings ?
I hope my query is clear. Please ask if query is not clear.
Please Guruu2019s suggest me.

Hi ,
I do not know what a reference charactersitcs is,but there are all independant characeristics in terms of their values.
A guess it is because the VC data is changed after the sales order is created, the updated VC data is displayed properly only in VA02 or VA03 but other function modules fail to display the updated VC data.
I understand there is a relationship of instance -between sales order object and VC data object-which we need to update and then see the latest data.
Please let me know if anyone has debgged VA03 to know how the standard SAP program retrieves VC data in a sales order.
Thank you,
Hemant

How can i find PR from Sales orders?

As we know,we can relate the Sales order and Purchase order from table EKKN.
But when we haven't creat the purchase order,how can find purchase request order form sales order NO.??
TKS a million~~

Hi
Very simple to find out go to ME53N in item details click account assignment tab in that you have AccAssCat E and Order field you will find the sales order number.
If you want to see some collective data use ME5A and select Scope of List as ALV and Account Assignment Category as C for sales order.
Thanks
S.Murali

How to do Goods Issue from Sales Order Stock?

Dear All,
we are doing a trading Scenario & based on customer requirement we procure the goods from our vendor & we receive it to Sales Order(special) Stock. Now what are the settings to be done in the Sales/Shipping so that when we do a delivery for our customer the Stock is Issued from our Un-res Sales Order Stock & not from un-res stock ?
Hope its clear.
Regards,

Hi Sam,
Thanks a lot for the reply.
Sorry for not explaining the scenario in the begining.
See I have to configure a trading Scenario with some changes from the std.
As in trading Process there are 3 entities.
1. Customer - X
2. Company - Y (Who performs trading)
3. Vendor - Z
Following is the breif requirment.
Company Y generated an inquiry in system for an item with respect to customers RFQ. Now since Y doesnt manufacture the product(item) it creates a PR in background with respect to inquiry.
Based on this PR, Y procures & receives the good into Un-restricted Sales Order Stock (with ref Inquiry doc no:).
Now based on price Quoted by Z, Y will create a Quotation with ref to inquiry & finally a SO for Customer - X with ref to the Quotation.
Now at the time of delivery (creatd with ref SO) system is not able to issue the goods from the sales order stock since the stock is stored with ref to inquiry no: & delivery is with ref to SO.
So I am planning to simulate a cycle by creating a delivery & PGI with ref to Inquiry.
If you can suggest a way out, it will be highly appreciable.
Hope its clear.
Regards,

How to delete line item from sales order ?

Dear All ,
user is having 20 line items from which 3 line items of which prod order confirmation cancellation is done also goods reversal done now as user tries to delete the line items an info box pops up --> Due to cost management the line item can not be deleted . Can u tell me that if these line item is not deleted than how to delete this ? sos what user had done that he had selected reason for rejection for these 3 line items so now the total wt is reduced but user is not able to delete the lineitems .
pl help
sap11

Hi
For those line items you can assign a REASON FOR REJECTION. Automatically the status of those line items will be closed.
Thanks,
Ravi
PS : sorry....please ignore my post.
Edited by: sankar ravi on May 20, 2008 3:45 PM

Partial billing on service order

Hi guru,
I have a quick question: I have a service order ( no delivery involved.) Can I still do partial billing against sales order?
In this case, sales order 's confirmed quantity is grayed out. invoice quantity is copied from sales order confirmed quantity is also grayed out.
I would like to be able to enter the quantity on the invoice anytime by the business? Is this possible?
Thanks

Hello,
Go to VF01, select your billing type, enter the order number, click on the selection list, check whther you are able to change the quantity to be billed or not?
Prase

Creation of automatic PO from sales order in 3rd party scenario

hi ,
we know, as per standard SAP , creation of PR from Sales order happens when we save SO. how to create PO automatically from sales order? and where where to put document type for that PO ? ( in schedule line category we can set document type for PR)

Hello
In addition to what Kapil suggested,
3 - The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO and
4 - The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record.
By activating those config you can automatic create PO from PR.
For that use TCode ME59 to automatically convert the current PR into PO.
But, you can not automatically generate PO from sales order similar to that of PR.
Thanks & Regards
JP

How to get Changed fields in Sales order to create a report

Dear Gurus,
How to get the log from sales order for the change of particular field.
In my scenario, If an user remove the delivery block from sales order I want to capture the date on which this delivery block
is removed and by whom (User)?
I know that I can get the log of change but can I get in the form of field updates because further I want to use that date and user name to create a report.
I hope u got my query. Please reply soon that I can create a report.
Thanks in advance.
regards,
Sanjay

Hi
You can use the table CDPOS for tracking the changes at the Table level with the Sales order number
or Else you can also use AUT10 transaction to track the logs/chanages with START DATE, END DATE and the Transaction code in your case it is VA02
Please check and revert back
regards,
santosh

Transfer of requirements from sales order to production.

hi
how are the requirements transfered from sales order to MRP.
if a sales order is created how is the reqirement getting tranfered to MD04.
is it through requirement class and requirement type.

Hi Friend,
Basically the requirements are transfered based on the requirement types
Priority 1: Strategy group...Every strategy group is assigned with reqt type...depending on the strategy selected the assigned Requirement type is triggered and it will behave as per the configuration.
if Strategy group is not mentioned in material master then it will pick the requirement type which is assigned to Item Category group in sales Org 2 of material master.
if Item category group is not mentioned then it will look for MRP group.
Thanks
Satya

How to create Subscription Schedule for a Contract created from Sales Order

Hi Gurus,
Need help in creating subscription contracts from Sales Orders.
We know that Service Contract is created from Sales Orders by adding covered item and service item as two lines in a Sales Order.
1. Does anyone know how to a create Subcription Contract by adding single item or BOM item(Model) to a Sales Order?
2. Can we have a BOM item created as Subcription item and reference this to the Service Item in the Sales Order, so that we get the Service Contract created with the BOM item as Covered line.
3. Whenever we create the Service Contracts from Sales Orders, the Billing Schedule Level is set to 'Top Level'. Can we get this changed to 'Equal Amount' by using any profile options.
Please advise as we are in a critial design phase and need to make a decision quickly.
Thanks,
Sid

Hi Mani,
I have a similar requirement but i need to transfer the values to the same page... what then. I have seen the developers giude and the example shows how to tansfer values to another page but no clues what so ever if i have to transfer them to the same page different region. Do u have any suggestions ....
Regards,
Amit.

Need to copy a custom field from sales order to billing document

Hi All,
I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once i add this field up in both the documents in the header part i need to create a copy routine using the VOFM tran, can any body help me on what's the procedure to add a field in billing document and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
solved it myself ....
Regards.
Message was edited by: seshi
seshi

Hello,
Regarding item 1, is it in the region of the global links (ie logout, home, preferences, etc.)? If not, have you tried creating a link via personalizations to the region you wish to have the link displayed (item type = link, destination = fully qualified name of your .xml page/region?
Regarding item 2, you may have to create the custom subtab programatically using the controller for the region of the current subtab layout.
Regarding item 3, you can also add a submit button to the page button bar region via personalizations. You can then add any logic you want to the button in the controller for the page.
Hope this helps.

Create Billing Document from Sales Order (Without Delivery)

Dear Experts,
Pls note, presently we are creating Billing Document (VF01) from Outbound Delivery Number after Post Good Issue. All sales Document like Billing Document, Output Type, Invoice Type has been configured for this process and we are doing this without any error. Fyki, we have configured lots of Z Order, Billing & Delivery type to do this processes.
But for one of this order type we need not do any delivery. We want to create Billing Documents from sales order directly (without doing any Outbound Delivery).
So, would u pls advise the steps how can we configure and assign Order Type, Billing Type or any other type to meet above requirement.
Thanks in advance.
Best Regards.
Ripon

Hi
There are two most important configuration:-
1) In VOV8 for your Order Type maintain the Order Related Billing Document
2) Maintain the Copy control setting in VTFA betwwen your Order Type and billing Type.
Also note that if your line item is not require to be delivered then for your Item category maintain (in VOV7) not relevant for delivery and not relevant for scedule line.
Regards
Amitesh Anand
Edited by: Amitesh Anand on May 24, 2010 5:09 PM

How to do partial Billing from Sales order

Similar Messages

Maybe you are looking for