How to get our HP Officejet 7310 All-in-One to print using the network option

The network printing initially stopped working on Win XP. I now use Win 7 Enterprise.
I have uninstalled the printer from my PC, restarted the machine, went through the add new printer device wizard and still no network printing capability.
I currently use the workaround of the USB connection for printing from one PC.

Have you tried running the Network Diagnostics tool to see if your printer is on the network.
The tool is Here
www.hp.com/go/tools
JonW
I work for HP

Similar Messages

I cannot get my HP officejet 4215 all-in-one to print graphics

how do i get my HP officejet 4215 all-in-one to print graphics. as an example if i print my visa statement the visa logo and bank logos don,t print

bamajim,
Here is a link to a page for your printer that may help with your issue.
The document provides steps to troubleshoot printouts that do not match the screen while printing from the web.
Does this also happen when printing graphics from somewhere other than the web ?
Once you give these steps a try let us know what happens.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Getting HP Officejet 5600 All-in-One to print from wireless network?

I have the printer, via USB cable, hooked up to my desktop. I have both my desktop and my wife's notebook hooked up to our wireless network via Cisco Linksys WUSB600N USB adapters. Using Cisco Linksys WRT610N router. The Best Buy sales person said as long as I had the printer hooked up to my desktop and my desktop was on or in sleep mode that we could print from my wife's notebook. I have added the printer driver to the notebook. Now I cannot even get a test sheet to print using my wife's notebook. The printer still prints from my desktop. Do I have to hook the printer up to the router via USB cable to get this to work or what? This wireless thing is still a bit new to me. Any help, suggestions and/or answers will be greatly appreciated. I eagerly await your helpful replies. Thanks!

I know I'm likely bumping an old topic...but hopefully this will help someone else.
This *is* possible.
The best way is to enable sharing on the primary (desktop computer that sleeps.) computer after installing it properly on the desktop. Find out the IP address that your modem has assigned to this computer, save it!
Then, on the laptop, go into the "run" menu and type in the IP address of your desktop, starting with "\\."
(So, if your IP is, 123.456.7.890. You would type into the run box of your laptop, "\\123.456.7.890" without the quotes.)
At this point, you may be prompted for a username and password on your laptop. Simply put in any username and password that you have on the desktop when you first start the desktop up. (If a menu requesting username and password does not appear, simply move on.) I would advise you to check the box labeled "Save this information."
At this point a new window should appear, it will show all network resources available to you on the desktop. If you've shared the files properly on the desktop, the printer should be showing in this menu. Simply double-click on the printer that you wish to use, and voila! Your laptop should install all of the required drivers and be connected. Be forewarned, your printer must connect directly through to the desktop computer. DO NOT have the printer connect through a USB hub before it reaches the desktop, this may cause communication issues later on.
There's really a bunch of guides out there on this type thing, but you do have to search for them. I hope that I managed to help you and anyone else out there that's wondering the same but can't drop money on a printer that's brand new.
(Lastly...if it doesn't want to print. Restart both the desktop and printer. Most of the time that fixes it.)

HP C6180 All in One Not Printing on the Network

I have 3 wireless laptops and an HP C6180 on a wireless network. This week all 3 computers had issues intermittently trying to print. The print job would go to the que, but then it would just be an error and not print. Now today, none of the laptops have been able to print. I tried to connect to the wireless network with the printer an it did find the wifi sometimes and did not other times. (Oh, and it's not about it being too far away, they were right next to eachother). I actually plugged an ethernet cord into it and it did the same thing. So, I assume there may be an issue with the wireless, but I can't print when is wired with an ethernet cable either. I am completely stumped. Been working on this issue for about 5 hours now, and figured I would just post it here. If anyone has any idea what this could be, please let me know. Also, 2 computers are Vista, 1 is XP. No changes have been made to any of them lately.

If you can connect with an Ethernet cable, do so and turn off the wireless function of your printer. Only have one connection method live at any one time or things will get very confusing.
OK, once you choose your connection method, it will be best if you can set a static IP address for the printer (outside the DHCP range).
Need help? Tell me about your router.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

What is an Error: 0x8477e630 and how do I fix it on an HP Officejet 7310 All in One?

What is an Error: 0x8477e630 and how do I fix it on an HP Officejet 7310 All in One?

I did a Google search on Error 1450, and it seems to be a 'lack of resources' issue within windows. Not related to iTunes.
Maybe shut down all other programs (including the TSR programs you may have loaded) and see if it helps?

Hp officejet 7310 all in one scanning/faxing problems

faxing and scanning will not work on my hp officejet 7310 all in one printer ... i have uninstalled and then re-installed, but still not working.... what am i doing wrong?

I'm sorry..... I did find an ERROR message.
When I clicked, it showed this: there are 5 green check marks and I will indicate with an *
* Device Manager
* Driver Check
* Device Status
* Window (WIA) Scan
* Solution Center
* HP Twain Scan
but then this:
! (a yellow exclamation mark) next to
Registry
HP Scan Flow Manager
Digital Imaging Monitor
Front Panel Test
Test Scan
Hope this helps you find my problem ......... thank you.

HP OfficeJet 5505 All-In-One wireless printing.

I've got a problem getting a HP OfficeJet 5505 All-In-One printer working with a Time Capsule for wireless printing.. I'm not quite sure how to debug this, so I'm asking for a little help.
If I connect the printer directly to the Mac, It is properly recognized when I go to add it into the printers list, and documents print normally.
Now when connected to the TimeCapsule, It looks to be recognized in the Airport Utility, and when I go to add it into the printers list, I can see it connected to the Time Capsule.. One difference is that I have to manually choose the printer driver rather than it being auto selected..
When I print a document, it looks like it spools up normally, and gets sent to the printer.. However the printer never starts, or prints.
After reading a few posts it looks like there might be some compatibility issue between office jet printers and the Time Capsule/Airport Extreme as I am not the only one with issues.
Any ideas?

The OfficeJet 5505 uses LIDIL (lightweight imaging device interface language) which depends on the host computer for low level commands. It will not work with the Time Capsule's USB port.
Technically, neither the printer nor the TC is at fault. The printer will only work when connected directly to a computer's USB port. Searching for drivers will be a futile exercise.
Sorry for the bad news. If you want to get a printer on your network, get a network printer.

How to get rid of a window which says: CalendarAgent wants to use the "login" keychain

How to get rid of a window which says: CalendarAgent wants to use the "login" keychain

I would get free EasyFind (Spotlight will be a total waste of time), and search for caremefile and caremefile.info. If it comes up with anything, right-click and select move to trash, or just destroy. Since you didn't install anything, shouldn't be necessary to authenticate with the admin password before it will move to trash. Could also click on reveal in finder, which will allow you to see the actual location. Set it up as per the screenshot below.

HP psc 950 all-in-one is printing half the page...cuts off the top portion of what I am printing.

HI! My HP psc 950 all-in-one is printing half the page....cuts off the top portion of what I am printing. Not sure what happened to the printer. Came home one day and the printing wasn't the same. Possibly the kids could have fiddled with it but no one is owning up to it. Any solution to get the printer printing normal again?
Thanks
-L

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have a new iMac and want to use my HP 7300 All in One and to use the "Fax"feature I need a phone port on computer and of course, this computer does not have one. Are there any aftermarket devices for USB to phone that would work in this case?

I have a new iMac and want to use my HP 7300 "All in One and cannot use the fax feature because there is no phone port is there a solution for this?BACellli

You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.

No color--Except when using 'Clean'...how is that possible? Officejet 4215 All in One.

I have more impossible problems with my printers these days.....
I do a 'Clean Cartridges' and everything is perfect, all 3 colors and black.
But if I then try to Color Copy that page, or print a page from IE, or print from Photoshop...no color comes out!
Some times I get a few small smudges of yellow or blue, but always zero red.
Do another Clean....and the Clean page looks perfect!!! If anything there is almost TOO much ink on the page.
So I have proven I have ink, the nozzles aren't clogged...yet it wont print?
What could possibly be the problem?
Yes, I keep checking to see if it is set to Grayscale, its not (and I do get yellow smudges sometimes)
HP Officejet 4215 All in One.
Any ideas appreciated...
Mark

Hi RandomGrin,
Maybe option 2.”Disable the HP Digital photography options” will help. Further details can be found on the following Link.
Best Regards,
Tom_S
Although I am an HP employee, I am speaking for myself and not for HP.
Click "Accept as Solution" if it solved your problem, so others can find it.
Click the KUDOS Thumbs Up on the left to say “Thanks” for helping!
I work for HP, supporting the HP Experts.

Error message fax scan canceled on officejet 4500 all in one when faxing from the solution center.

I keep getting the error message fax scan canceled on my hp officejet 4500 all in one when I try to fax from the hp solution center,I have no proplem faxing from the officejet 4500 itself. I appreciate any light that you can shed on this matter.Thank you.

Hey @kburns7934 ,
I just sent you a private message. If you are not sure how to check your forum messages this post, has instructions.
Enjoy your Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet 4620 All-in-One Loses Connection to Wireless Network When It Goes Into Sleep Mode

My HP 4620 All-In-One wireless printer works fine until it goes into sleep mode. Once it goes into sleep mode, it doesn't wake up if a print job is sent to it. If I wake it up manually by pressing the blinking on/off button, it still doesn't print. If I completely turn it off and then on again, the print job that was queued on my computer will start printing, but that's a huge pain and waste of time nearly every time I want to print. I've installed all available updates. I also assigned a static IP address in an effort to correct this but nothing helps. I see that others have complained about this problem, but I do not see that anyone has had success resolving this. My operating system is Windows Vista. I use a Link-Sys Wireless G Router. Thanks.
This question was solved.
View Solution.

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

HP Officejet Pro All-in-One L7780 Printer installation fatal error "MSI.MSI_BPD.Scan"

Hi,
I run my laptop (an HP Probook) on XP and have was having trouble printing from Word and thought a good starting point would be to check the printer driver was complete and working by uploading the driver from the HP website.
However, on trying it I received the fatal error message "MSI.MSI_BPD.Scan" saying that a more recent version was already installed (dspite my having used the HP web-site).
The HP fix "HP Installation Error - XP" was automatically insatlled on my desktop, but didn't fix it. (The laptop did re-start as part of the process.) Part of the fix was to erase the previous version. However, after going through the process a second time it still didn't work.
Could it be because I used a different target directory for the upload, or is it something else?
Many thanks in anticipation of your help!
Nick
P.S. I did try the HP Print Diagnostic Utility v5.0 and the printer isn’t recognized (as being there at all) and on clicking the “get drivers” (or something like that) button the process appeared to repeat that above: everything loaded and then – nothing!

Hey Nick,
Check out this document to see if it is able to walk you through solving the fatal error. A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
If this does not help post back with any new details and we can continue from there.
Best of luck!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP Officejet 4620 All in One Not Printing Black-BRAND new cartridge

Hello everyone, I am hoping SOMEONE can help me, as this has taken up hours of time and resulted in plenty of frusteration. I just replaced my black ink cartridge, and not a single drop of black ink will print. I have genuine cartridges, and cleaned the print heads, both steps one and two, atleast twice each. In the meantime I have since used up all my color ink, which is still working. But black does not show up AT ALL. Sure, I could buy more color cartridges and use them to print black, but at this point, I do not want to put any more money into this printer if it's not going to work properly. I am desperate for an solution! I run a small business from home and I NEED my printer. My warranty expired a few months ago and am really hoping I don't have to pay for phone support.
Does anyone have any advice on how to get black to print properly?? PLEASE AND THANK YOU!!!
This question was solved.
View Solution.

I suggest you call HP support regardless of warranty as described in the post here. If you are in the US call 1-800-HPINVENt, elsewhere see the contact information here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to get our HP Officejet 7310 All-in-One to print using the network option

Similar Messages

Maybe you are looking for