How to restore, reinstall to WIN 7 vers. USB 3.0 Host Controller after driver upgrade to Win 8

After an undate for the Intell USB 3.0 Host Controller (extensible) as a WIN 8 driver update my DynaDock does not work properly for any devices using the USB ports on the dock and connected to any USB port on the HP Envy 4-1043 laptop. Reading everywhere I can find anything it seems that there is a problem with the Microsoft or Intel driver for the USB 3.0 Host such that the USBs work find when things are plugged directly into them. BUT, when the dynadock is pluuged in and any of its 6 USB ports are used the devices either cannot be found or behavior extremely sluggishly.
This Dynadock has worked well with my last 4 HP computers and worked fine under WIn 7 and 8 on this Envy until the last update of the driver.
I do not know how to re-install the old driver (Hps' WIN7 version sp56724. Can someone please give me the steps or refer me to a source to do this properly?
There is no roll back option in the device manager for this driver. It is grayed out.
I have take pride in not experimenting with 'brihg tiddeas' of how to fix things on this machine. Not that 99% of my gut plus resources from help pages and Miscrosoft did not work before. I do not have a backup computer anymore and I cannot afford the lost of time and productive in making a mess and then spending days trying to undo and fix something that I know others have done well.

Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station.

Similar Messages

Intel(R) USB 3.0 Host Controller Switch Driver

Hello All,
As part of our software install we are installing the Intel(R) USB 3.0 Host Controller Switch Driver (iusb3hcs.sys) on machines that have Win 7 Embedded (x64). When this driver is installed I have noticed that the USB controller behaves differently:
When shutting down (or rebooting), the controller does not completely lose power. Therefore, if I reboot or shutdown from Win7, and immediately boot to a WinPe usb stick, the driver in winpe seems to have an issue loading and the stick is not recognized.
To fix the problem I can simply unplug the machine (allowing for the controller to lose power) and then booting into WinPe the stick is recognized.
Wondering if anyone knows what OS setting or change I can make in the inf to tell the driver to make the USB Controller power down when doing a shutdown. Any help appreciated

Hi,
I'd probably start by asking here:
https://social.technet.microsoft.com/Forums/en-us/home?category=windowsembedded&filter=alltypes&sort=lastpostdesc
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

How to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

how to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

how to restore:
http://support.apple.com/kb/HT1414
error code 21 fix
http://support.apple.com/kb/TS3694#error1015

Can't access old ver. 9, 11 & 13 clips after Windows upgrade

In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips. In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro). Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive. Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13. Tried everything I can think of....any suggestions PLEASE!

Very good, I completely understand. Please understand "I am not a computer geek!"
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets). CORRECT! Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO! (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.) NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them. As such there is nothing to add to the timeline. Last night I added to the NEW PE 13 a 22 min program I'm working on. I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
Now in response to a previous question you asked:
1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
the Presets" field there? NO.... I can get to /Computer but there is no QuickTime there! I did download QuickTime yesterday after your suggestion.
2. You wrote
Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
Or other? What is the specific full name of one of these files that is giving the error message?
With everything I've been trying, I'll have to recreate this series of events to answer directly.
When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system? Help me with a way to determine what the bit was on 9 & 11!
Were two separate computers involved or did you manage to change the operating all on one computer? All on one Computer
The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace. Help me understand!!!! I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace". But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
WolcottVideo
    Can't access old ver. 9, 11 & 13 clips after Windows upgrade
    created by A.T. Romano in Premiere Elements - View the full discussion
WolcottVideo (Mike Bruce)
Thanks for the replies.
My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
Here is a basic description of where the details between us need to be confirmed...
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
We will be watching for your reply.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How do I reinstall files from a USB device to my computer,with Windows 7 on an HP G62-350 notebook?

I backed up my files onto a USB flash drive before using system restore to restore back to factory settings. I now want to reinstall files from the USB storage device.

There should be an .EXE file on the flash drive, probably Restore.exe. Click it to run and it will extract the files to a folder on the laptop.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to restore/reinstall new imac

Hi folks. I just bought a 4 month old iMac 21.5 500GB model and yeah, I'm blown away. Anyway the thing is that there are a lot of empty folders from previous owner and his name keeps showing up for accounts etc, so I want to wipe the HDD and restore/reinstall the OS X 10.6 and start like new again before I get into having my own stuff on it. I have 2 discs that came with it - Mac OS X Install DVD and iMac Applications Install DVD. What's the process for doing this so that all HIS stuff will be gone forever and it will become MY iMac? Thanks guys.

Wonderful - it's easy to do what you want to accomplish:
Insert the install CD; once the icon shows on the desktop, hold down the C key and choose Restart. It will now boot from the install CD. Once booted, click past the language selection and then go to Utilities (Menu bar), click on Disk Utility, and choose your internal hard drive. Click on Erase - you'll have various choices; I usually go with the 7 x write (it'll write zeroes seven times and nobody will be able to recover anything). Once the erase is done (it will take some time!!), quit Disk Utility and let the installer do its' thing. You will go through the complete install and initial setup, so you can set up your own account, etc. If you have any files, etc. that you want transferred, back them up first - during the setup, the Setup Assistant will start automatically and ask you if you want to transfer anything. If you only have a couple of files, you can also drag 'n drop them later. In any case, the setup will continue and will ask you to insert the second disk. Once all of that is finished, you'll have your own setup and everything from the previous owner will have been deleted.

How do i install MS Ofiice tools (Word,Excel...etc).after software upgrade

How do i install MS Ofiice tools (Word,Excel...etc).after software upgrade

OK. Connect the BlackBerry to your PC via the USB cable and start the BlackBerry Desktop Software.
If you are asked to upgrade anything after starting the Desktop Software, cancel and don't upgrade for now.
Click on Device > Applications.
Scroll through and find PassWord Keeper and DocumentsToGo (or WordToGo, SheetsToGo, etc.) and click to install, or press the + symbol to add those apps to your device.
Complete the ensuing prompts and they should install correctly for you.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

USB 3.0 host controller and USB Root Hub xHCI not showing up on Windows 8.1 laptop

Greetings and thank you for taking the time to read the following message and 'maybe' attempt to help me with my current plight...
I have an HP envy m6 laptop running Windows 8.1 and Windows 7. The problem i am facing at current is that i have only 1 out of 4 usb ports working on my Windows 8.1 partition however on my Server 2012 partition, all four ports are working fine. After asking
around i have come to the conclusion that i'm having a driver issue. I compared what was present on the Windows 7 USB controllers (in Device Manager) to what was present on the Windows 8.1 controllers and i found that my Intel(R) USB 3.0 extensible host controller
- 0100 (Microsoft) and my USB Root Hub (xHCI) was missing on my Windows 8.1 partition.
Now for some background....the problem first occurred when i was trying to solve an external hard drive issue in which none of my external hard drives where showing up when i plugged them into my usb ports, i came across an online solution telling me to
uninstall all my USB drivers in device manager, restart the laptop and let the computer re install the drivers automatically, the result was that i only had 1 out of 4 ports working. Could someone please point me in the right direction in order to fix this
problem?

Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station.

Toshiba A60 USB 2.0 Host Controller, Can Anyone Help?

Hi everyone,
I recentry purchased a new Toshiba Satellite A60 notebook. Of course, instantly I formatted it, and installed XP Pro, because I didn't need half the programs that the laptop comes installed with.
Problem is now that all they gave me was a recovery disk (DVD). I have found the ATI and RealTek Drivers with no problems off the Toshiba Download Centre, but I cannot find any USB 2.0 drivers (Host Controller). The USB goes really really slow now. I tried just using a Generic Host Controller, but it goes 10 times slower then if I dont have any controller in there lol.
Im thinking maybe I can get Norton Ghost, and try to view the files that Toshiba used in their Recovery Disk.
I am still stunned why they haven't given me a Drivers CD, first time this has happened to me.
Any Suggestions? Or maybe anyone know where I can get the Host Controller from, that suits the A60?
Thanks in Advance!

HI Ozzie,
Did you not receive the Toshiba Tools & Utilities CD in addition to the Recovery Disks ?
If not then perhaps you could re-install your system from the recovery disks (thereby getting all the correct drivers) and then delete the unwanted software afterwards. This would ensure that you get all the ccompatible drivers for your system
regards,

How to restore iTunes Library on computer from iCloud or other method after iTunes library suddenly becomes empty?

I just opened my iTunes on my laptop (which is considerably slow) and all of my music, apps, everything has been wiped for some reason ie. my library is completely empty. I'm not sure what caused this and I really don't care I just want my playlists, music, apps back so I can add more music and sync my iPhone with it again as normal.
I'm sure that all my music has been backed up to iCloud but I'm not sure how to access that from my computer and how to import it back into my library. I'm afraid to sync my phone and iPod now because I've read that this will wipe them completely again and they are the only places I can see my music/playlists so I don't want them to disappear from these devices also before I can restore everything on my laptop.
I logged into my apple ID again on my computer hoping that maybe my music would come up when iTunes was connected to my particular account but the library is still empty. Not really sure what to do and would appreciate any advice. Maybe I'm missing something really obvious here and if so could someone point it out, I won't be insulted! Thank you!

If your music is still in \Music\iTunes Music, I believe your library can be recovered by closing iTunes, then going to \iTunes and renaming iTunes Library.itl to something like iTunes Library.itl.old, then renaming the most recent previous library from your \Music\iTunes\Previous iTunes Libraries folder to Library.itl and moving it to \Music\iTunes. But I would recommend you post your question over in the iTunes for Windows forum go be sure as they would have more expertise on recovering your iTunes library.

Restored 10.6 OS from CD and fails to Boot after Combo upgrade

I have a clean install of Lion on my internal drive and an external clone of the HD from the previous Snow Leopard install. The Clone worked until I updated via the latest auto update. I have App's and other settings to transfer to Lion from this clone so want to get it working so I can ensure all the App's are upgraded to work on Lion or are deleted.
After the external drive failed to boot I reinstalled the system from my Snow Leopard Install CD, not the 24-inch iMac (Mid 2007) restore CD.
I then used Auto updater to install the combo and other updates to 10.6.8 this booted fine until I upgraded Safari 5.1 and Java - the last items that came up on the software updater. Upon restart, the boot failed in the last portion of the boot and at this point the Apple emblem went away and the round circle with diaginoal line apeared.
On starting with the option key down, the clone disk 10.6.8 shows as being available, along with the internal Drive, for booting.
Starting with "command + S" gets through to the last line of the process then states "waiting on Root"
When compaired to a Snow OS that boots OK it is the last line of code before the curser is ready for entering a command.
Can anyone tell me what to look for or how to repair this error so that I can get my data across to Lion. Thanks

Well, in case anyone else has a similar problem I managed to fix the system by the following process:
I reinstalled 10.6.0 from the retail Snow Leopard CD. The drive Booted OK but I needed to be upgraded to 10.6.8 to use the migration tool so I then upgraded using the Software Update utility. Boot failed again at this point and could not be fixed by anything I did.
I then reinstalled 10.6.0 from the CD to try again, but the HD would not boot this time around.
I downloaded CleanApp by Synium Software (http://www.syniumsoftware.com/cleanapp/) on a commendation from the famous eBook, "Take Control of installing Lion" by Joe Kissell of TidBits. I used this from my Lion HD to remove all orphan files, PPC files and Apps, and other junk. Snow Leapard still not Booting after repairs by various disk repair utilities including Apples.
I Booted from my internal HD using Lion and ran SuperDuper to make a new Clone of the failed HD on a second external HD. Took a day and a night to run while I was at work, but the new clone would not boot at this stage so I ran SuperDuper again using the "Smart Update Backup" option. This just adds changed files or missing files to the clone. At the end of this process I had a running Clone that would boot on 10.6.0.
I Booted from the second Clone and used the Software Update utility then to up grade in the two stages the Auto system used to bring my OS up to 10.6.8. This was successful and I had a Bootable Snow Leopard with no old Apps from which to Migrate my data.

Hard drive upgrade and Win 7 installation on MacBook Pro

I am planning on installing Win7 on my MacBook Pro using bootcamp. I also plan on installing a new 500 gig HD. I also have a new unformated external hard drive I plan to use a a backup drive for both the mac OS and The Win7 OS. What is the most efficient way to accomplish these tasks? Since this is my first Mac exposure I am not exactly sure what order I perform these tasks. I am fairly familar with The MS OS family having used the OS since the DOS days. Some expert direction would be appreciated.

This should be fairly simple, first you will want to make a backup of the current internal drive. I would recommend using the external drive for that. I recommend an external FW drive for speed but a USB will work, it's just SLOW! Here is how you will format the external drive.
1. Launch Disk Utility
2. Select the external drive on the left side of the pane.
3. Click the Erase tab and format the external drive as *Mac OS Extended (Journaled)*
Next you will want to download a copy of SuperDuper (SD), you can get a free license however I strongly recommend paying the $27 for the full licensed version so you can do things like schedule backups, access all it's features and finally get support if needed.
Once you have installed SD create a bootable clone of your internal drive, then you have a full backup in case something goes haywire. Directions for doing that are very straight forward.
Next physically install the new HD into the MBP. Once it is installed you will want to format it from the install disc that came with the computer. You will find Disk Utilities on the install disc, format it the same way you did the external HD.
After you have formatted the new internal HD then you will do one of two things:
1. Either do a fresh install of OSX from the Install Disc OR
2. Restore the SuperDuper backup from the external HD.
If you choose option 1 then go ahead and do the installation from the Install Disc following the simple directions.
If you choose option 2 then you will boot from the External HD (hold down the Option Key on startup) and then using SD restore what you have on the external HD to the new internal HD. Once you have completed this task then you can boot from the new internal HD, the first time you will again hold down the Option Key on start up choose the internal HD. Then using System Prefrences-Startup Disk and choose the internal drive.
Once you have completed either Option 1 or 2 then you can begin Bootcamp Assistant and CLOSELY follow the instructions for loading Microsoft Windows.
Once you have ruined your MBP by installing MS Windows then you can still use SD for creating backups of the internal HD to the external HD.
Regards,
Roger

XPOWER USB 3.0 HOST controller not found

i tried to reinstall the usb 3.0 driver/app from msi and when i run it from the start menu i have this error below
i also tried asus driver and does the same thing.. i need help.. and i am thinking that the conflict on my device manager is the controller
Machine Spec :
Bigbang Xpower (1.40) bios
intel xeon x5650
Kingston hyper X 2250mhz
Msi GTX 295 single PCB
please help..

here is my story..
my old rig was xpower + gtx580 + same memory + xeon 5650 and works like a charm. i rma'ed my mobo last month and have the chance to assemble it yesterday, i sold my gtx580 and downgraded my card to gx295 and that is the only thing i changed.
right now, i do not know if the new rma'ed mobo has a problem or this gtx295 causing it. currently, here are the points to consider
-GTX 295 with a single memory it works
-GTX 295 with 2 or more memory i encounter a vga conflict
-GTS 460 works fine with a single dual and triple channel memory

After my upgrade to win 10.. (yes I know now!!) no screen.. no start up.. what do I do?

black screen situation.. powers up for a minute or so then just shuts down. What should I do?

Hi Steve366,
Sorry for the late reply but I already answered your other posts. Kindly check the link here: Windows 10 meltdown
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

I want to restore the preinstalled OS X Maverick on my new MacBook after upgraded installed Yosemite gets stuck at load bar

Hi,
After my free upgrade to OS X Yosemite
on my new MacBook with preinstalled OS X Maverick,
the MacBook starts with the new colorful Yosemite-Screen
and I can login to my MacBook-Account succesfully;
but then, after my password is accepted
the Yosemite load_display_line loads to a 1/3 only and the Yosemite stucks at this point.
As offered during my tries to fix the problem on the MacBook,
I had my MacBook checked by Apple
and received the code for "no problems, my MacBook is alright": ADP000.
Is somebody here who knows how
to restore the preinstalled OS X Maverick on my new MacBook
after the upgraded installation of Yosemite?
jona li

Here's how:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

How to restore, reinstall to WIN 7 vers. USB 3.0 Host Controller after driver upgrade to Win 8

Similar Messages

Maybe you are looking for