How to restrict area of particles
Hi. When I go into inspector of the emitter, I can specify whether the particles come out of a line, a point, a spiral, etc. I want to draw a bezier shape (say, a trapezoid) and make my particles (say, snow) only fall within that shape. How can I do that without making it fall all over my canvas and masking out the sides? [Please note, I am not asking how my shape can become a particle.]
Thanks.
Hi Mark Spencer. I set my emitter shape to Geometry and dragged my bezier shape into the little square that says: "source shape," but it still snows all over the canvas. If I set the speed to zero then it won't snow at all. Is there some setting I'm missing? Thanks.
Similar Messages
-
I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.
The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
Cheers, Tom -
My restrictions are turned on. I didn't turn them on. The only code I've used on my ipad is to unlock it and that code won't work on my restrictions. How do I turn off restrictions and prevent them being turned on again?
The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
Cheers, Tom -
HT4113 I forgot my password in the "restrictions" area, how I unlock it?
I forgot my password in the "restrictions" area, how I unlock it? I have tried 10 times I just cannot remember it, Is that why I cannot acces certain apps like: Netflix and hulu plus?
You can't unlock it. The only way around it is to restore your iPad to factory settings. You can't restore from a backup since the backup will probably contain the password that you can't remember. If you do have a backup that predates the restrictions passcode, you can restore from that backup. If not, restore to factory settings and start all over again.
Yes that could be why you cannot access those apps - if you restricted content for movies in the restrictions. -
F110 - Automatic payment. How to restrict picking up payments say,$10.
Hi Everyone,
Automatic Payment proposals when run, currently picks up all amounts including little cents like , 0.35. The payment method is Check and this involves cutting cheques for very small amounts.
How to restrict the program from picking up amounts say for eg , between 0 and $10 ..? Is there any settings we can use for this..?
Thnaks,
JayaHi,
Thanx..But if I put a minimum amount here, even my GST payments don't get processed with small payments.
Is there a way to restrict it for some payments alone..? Here the problem is there are Vendor payments and GST payments and we want to restrict it only for vendor payments involving smaller amounts.
Rgds,
Jaya -
Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.> * explorer.exe is blocked already, but users are able to enter the
> Windows Explorer by clicking on the name which is visible on the
> Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
How to restrict the options available in variables while reporting
Hi all,
i am having a requirement, while generating the reports the end user able to see the codes for the other sales office when he press f4 in the variable field. how ever he is not having authorization to view the report but ther requirement is that dey dont want this codes avail when dey press f4 in the variable field. plzzzzzzzz any can tell me how to restrict dis. suppose when i enter company code the end use what his sales off availabe in the field not other.
Help=******************,
Regards
KKHi KK,
I think a variable proccessed by authorization should help. Mark "ready for input"
and only values user is authorized for, are displayed in F4 screen.
Please follow the steps mentioned in this helpful thread:
https://www.sdn.sap.com/irj/sdn/directforumsearch?q=variable%20authorization&objid=c4&searchid=7180432&rankby=10001&threadid=404736
Regards
Joe -
How to restrict the change access in CRM for OLTP orders
Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
SuneelHi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards. -
How to restrict the GR for Production Order when Goods Issue is not done
Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva -
How to restrict the user in MIRO for not modifying price
Hi All
My requirement is How to restrict the users in MIRO screen for not modifying Material Prices of only the for specific ROH types .
For example :
Valuation class RM description
3021 RM - A
3022 RM - B
3024 RM - C
when ever we procure the above Raw materials A,B and C and
the Quantity of each Raw material @ 10 units and value @ 1 INR for each unit
RM - A procured qty 10 @1 total price is INR 10
RM - B procured qty 10 @1 total price is INR 10
RM - C procured qty 10 @1 total price is INR 10
total price of PO is INR 30
when we received invoice material prices are assume it INR 1 is excess for each material.Now the invoice price for each RM has become INR 11.
in MIRO we want restrict the user to change the price from INR 10 to 11.
suggest the best possible ways to restrict in MIRO screen
Thanks & Regards
MalaDear:
Take help of ABABPER fo implement exit using INVOICE_UPDATE or MRMH0003 Logistics Invoice Verification: Revaluation/RAP exit. If this does not help then seek help of MM functional who will help you to find exit for the required task.
rEGARDS -
How to restrict the delivery quantity not more than target quantity?
Dear Gurus,
How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
Any other effective method? Please advice. Thanks.
Regards,
DavidDear all,
It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
I think there must be somewhere besides of those you menetioned.
I notes that SAP help for the overdelivery tollerance setting of scheduling agreement:
Overdelivery Tolerance Limit
Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
Dependencies
If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
Pls help! Thanks.
Regards,
David -
How to restrict the quantity & rate of MIRO with MIGO and PO
Hi friends,
Can any body tell me how to restrict the quantity & rate of MIRO with MIGO and PO.
e.g. if we have done MIGO for quantity 10 and the rate maintained in the PO is Rs.100.Then at the time of MIRO system should not allow to change the quantity and rate.
How we can do this?
Regards
Purnesh SharmaHi,
You are misunderstanding the use of MIRO.
If you change the details in MIRO you are NOT changing anything. You are just entering the price and quantity from the Invoice.
If this price and or qty is different from the GR aqty and PO price then the system will block the invoice for payment (and it can issue messages toinform the buyer if configured correctly).
The whole design of MIRO is based on the principle that you enter EXACTLY what the vendor has put on the invoice. By preventing the users from changing anything you will get NO mismatched invoices, but you will not be paying the vendor the amount specified on their invoice. This will surely cause problems.
If you do want to ensure that ONLY the GR qty and the PO price are used and cannot be changed then why not consider using ERS (Eveluated Receipt Settlement. this is basically self billing.
Effectively you will be paying the vendor based on what you have received in MIGO multiplied by the price from the PO. (which is what you would be doing if you stop any changes in MIRO)
Steve B -
How to restrict the last record and not moving to next reocrd
1) how to restrict the last record and not moving to next reocrd.
2) Also for the F6 key(for new record).When you are on the last record, next-record will create a new one, so that my question is do you want to forbid new record creation.
Francois -
How to restrict users to not default layout while creating a user specific?
Hi all,
I have a problem with frequent changes in report layout setting. When users trying to create a user specific layout in the window "Default" is set, out of "User specific" & "default" checkbox defaultly, so users saving the layouts. so it's overwritting on existing layout. we are ossing the old data. how to restrict end users to create new one with out changing the existing one.How to change that default check in "Default" check box to user specific defaultly. where i have to do settings for this. Thanks in advance.
PradeeshHi ,
My problem is still not resolved. I tried applying the people picker property and set a specific field(an email id field) to be available to only admins. Now the field is not visible to the normal users but only admins which is good but that email field
should be able to take normal users as wel as admin's email ID. currently due to the people picker property it only takes admin's ID and not normal user's ID - which is not as per expectation.
What this email ID field does is - when a normal user is logged in he/she wont see this field in that view. But when an admin logs in he/she can switch to admin view and see this field . The admin can put any user's ID in this field and pull out the required
resource's Time Report for modification.
Please let me know how do i overcome my problem. Detailed step description will be very helpfull .
As per Cameron's suggestion (add a rule on the "additional admin section") , i am not sure how exactly that is done. Would help a lot if i got to know how this works.
Regards,
Guru -
How to restrict changing password for user ?
Hi All experts ,
We have created users . Users should not change their password without permission of Administrator . How to restrict them by setting Permissions / Authorizations ?
Thanks.
KISHORE SATPUTEHi,
In "USER MAINTENANCE- SU01" --> in the "logon tab" there are 5 different "user type"
1. dialog
2. system
3. communication
4. service
5. reference
Kindly mention the function and role of all the above mentioned user types specifically and hows is one user type different from another.
These are as follows:-
1. Dialogue:-
For this kind of users:-
GUI login is possible.
Initial password and expiration of passowrd are checked.
Multi GUI logins are checked.
Usage:- These are used for GUI logins.
2. System
For this kind of users:-
GUI login is not possible.
Initial password and expiration of passowrd are not checked.
Usage:- These are used for internal use in system like background jobs.
3. Communication
For this kind of users:-
GUI login is not possible.
Users are allowed to change password through some software in middle tier.
Usage:- These are used for login to system through external systems like web application
4. Service
For this kind of users:-
GUI login is possible.
Initial password and expiration of passowrd are not checked.
Multiple logins are allowed.
Users are not allowed to change the password. Only admin can change the password
Usage:- These are used for anonymous users. This type of users should be given minimum authorization.
5. Reference
For this kind of users:-
GUI login is not ible.
Initial password and expiration of passowrd are not checked.
Usage:- These are special kind of users which are used to give authorization to other users.
Rewads point if helpful
Thanks
Pankaj Kumar
Maybe you are looking for
-
IMessage and Facetime not working in 8.3 (iPad 3 Wifi)
After updating to iOS 8.3 iMessage and Facetime is no longer working. iMessage receives messages now and then but is extremely unresponsive, often crashes, and usually only the last message shows. Some of the older ones show at times, but most seems
-
How can I choose another name for Game Center? (not a nick)
How can I choose another name for Game Center ? (not a nick)
-
ORA-03137: While using Enterprise manager Grid Control
Hi All, I have this strange issue. I use grid control to monitor production database. Both grid and prod db are on diff servers. when I login to grid control and frm there i login to prod database. I see this error in prod db alert log. Fri Aug 26 01
-
Comcast will not let me open large document 150mb. how do I open?
Comcas.net will not let me open large e-mail document (150mb). More the 50 mb. How do I open
-
Once I regress from 7.0 back to 6.0 I get the following message: "The Software for communicationg with the iPod is not installed correctly. Please reinstall iTunes to install the iPod software." I have the ipod updater from 06-28-2006 and when I laun