My restrictions are on and I didn't turn them on. The code is not the one I use to unlock my ipad. How can I find out the code to turn off my restrictions and why did it turn on?

My restrictions are turned on. I didn't turn them on. The only code I've used on my ipad is to unlock it and that code won't work on my restrictions. How do I turn off restrictions and prevent them being turned on again?

The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

Similar Messages

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can i find out the resolution and accuracy of PXI-6602 module?

I have a 32 bit 8 channel PXI-6602 counter module. PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

Hi chandhu,
Were you referring to the accuracy of the count register or the timing clock?
PXI-6602 specifications can be found in the NI 660x Specifications. The resolution of the count register is, as you’ve noted, 32 bits. This corresponds to a maximum count value of 4,294,967,295. As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal. Again, this is all found in the specifications.
You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
I hope this helps. Please post back if you have further questions.
Ed W.
Applications Engineer
National Instruments

HT1349 How can i find out the size and length of my playlist?

How can i find out the size and length of my playlist? Anybody?

It shows up in iTunes on your computer as seen here:

Another user has accessed my account and seems to have secured a download. The email from Apple doesn't state what has been downloaded. How can I find out?

Have been informed by Apple that a strange ID has gained access to download something unspecified without my knowledge. How can I find out what it was and how much was spent?

Sign into your Account > Click on your account name > Click on Account > Purchase History
iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727

How can I find out the overall time and not only the time of a single clip?

I have set up two cameras in one room. Both cameras record the same thing from different perspectives at the same time. I have found an interesting scene for video 1 (recorded by camera 1). Now I would like to find the time at which the interesting scene takes place in video 2.
However, I have not seen any way to get displayed, at what time the scene starts in relation to the total length of the video (e.g: scene starts after 5 minutes from total 10 minutes).
The indicated time refers only to a part of the clip and not to the overall project, even if a special clip is not selected. Does anyone know, how I can find out the time?

Go to Settings>iCloud>Storage & Backup. It will be shown just below the Back Up Now button at the bottom.

My six year old set up the restrictions code on my iPad and he doesn't remember the code he used. How can I find out the code. I already tried reseting the iPad and it did not work.

How can I retrive the passcode for Restrictions? I already tried reseting my iPad to factory settings but did not work.

I believe there is a way to reset the settings only, but I'm not sure if that applies to restrictions. Maybe there is a way on the computer?

I cannot update an app because I used a different ID when I purchased it and I have no record of it. How can I find out the ID and password

I cannot update an App because I used an ID and password to purchase the APP that I no longer can retrieve. Is there anyway that I can find out that information ?

Try here > Associating and verifying email addresses with your Apple ID
And here > Is there a way to find my Apple ID Name if I can't remember it?
Frequently Asked Questions About Apple ID

How can I find out the device name that has downloaded certain apps, someone else is using my iD to download stuff and I want to know who it is.

let me know what i can do to find out.

You can stop that someone by changing your password. You can not find someone, not really unless after you change password, that someone will come to you and ask for it.

How can I find out the incoming call and out going call from my orher chine

How will I know if my friend knows who I call

It is not you who have blocked them. The caller has opted to block their number from displaying on caller id displays. You can find out who it is by answering the phone. In the future, if the caller dials (I believe) *82 before your phone number (in the us anyway) the number should appear. Ask them to do this in the future. Some medical facilities and women's shelters have caller Id blocked for privacy reasons.

HT204088 Charges have come up on my bank statement, i have no computer just an ipad, how can i find out what these charges are for?

I dont know how to find out where the charges have come from?
Any thoughts?

The only way that I know of for viewing your purchase history is on a computer's iTunes (via the Store > View Account menu option), though you should be able to see (and manage) if you have any auto-renewing subscriptions : http://support.apple.com/kb/HT4098
For things such as apps, music etc you should have received email receipts from the store.

I was wondering how can I find out if there's a conflict on date and time

I have a program written for a local auction house where it allows them to track when there drivers were parking cars (hourly) or going on trips (flat rate). The person who enters the record does so later so she would need to enter the times that they did what. What they're concerned with is someone making a mistake and entering a record for 02:00 to 04:00 and another for 03:00 to 05:00 and having them get paid for 4 hours when it's really 3. So they wanted me to make sure they didn't get double billed. I decided to make it so duplicates can't be entered but I'm wondering how would I write it so if a period exists between the fromDate/fromTime and toDate/toTime I would know?

Convert the dates to seconds since the Epoch with http://java.sun.com/j2se/1.4.2/docs/api/java/util/Date.html#getTime() and check for overlapping intervals.
Harald.
Java Text Crunching: http://www.ebi.ac.uk/Rebholz-srv/whatizit/software

How can I find out the server port for a secured FTP site and creating a FTP Connection Manager

I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
SSIS SFTP Task Control Flow Component
available in the CodePlex which can invoked from SSIS.
References:
SSIS SFTP Task Control Flow Component approach
WinSCP approach
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How do i find out the purchase date and my coverage plan?

how can i find out the purchase date and my coverage plan on my ipad?

Try here for the warranty coverage. Your date of purchase would be tied to wherever you bought the device.
https://supportprofile.apple.com/

How can I find out specifically what plugins are missing? Am told missing, then plugin finder tells me no suitable found, I would look for them myself but have no way to find out what exactly need to look for.

I go into a wiki created by my employer, and get the bar at top of page almost immediately telling me there are plugins needed. I click the button offered for finding plugins, and almost immediately am told no suitable plugins are found. Plugin help offered is useless, because I have no idea what plugins I need to look for. How can I find out what plugins are being detected as "missing"?

If there is no LR edits to keep, or if you don't want to keep the existing edits, you could delete the files from LR and import them again.
Since the file names on disk and file names in LR don't match, you will need to manually match them up by hand individually, if you want to keep the existing LR edits.
The easiest approach to this -- without doing any script programming -- is to go into each directory, one at a time:
Select the correct folder in the "folders" pane. Right-click "show parent" as necessary to see the directory tree.
Sort the LR Library by creation date.
Using the details view in File Explorer, sort the files by creation date (add to the viewed columns if necessary).
Assuming no more than 1 image per second, the files should line up.

My restrictions are on and I didn't turn them on. The code is not the one I use to unlock my ipad. How can I find out the code to turn off my restrictions and why did it turn on?

Similar Messages

Maybe you are looking for