How to Setup Officejet 7310 in AutoCAD?

I am trying to configure AutoCAD (on a Win2000 machine) to use this printer as a plotter on a "Local Port". (the Postscript level choices were "Level 1", "Level 1 Plus", and "Level 2"). I get the following error:
"The output to the device must be spooled through a system printer because of a conflict over an I/O port. The HDI hardwre configuration will not take effect. Some System printers could possibly mess up the output. To allow direct connection to the port, all system printers must be reconfigured not to use that port."
Then it prints a bunch of gibberish which I think it is saying that my Postscript level is either too high or too low. I have tried creating additional ports with Windows and plotting to the port where the secondary printer is connected. Same results.
I was able to plot through the system printer and print a square. The problem here is that a very simplistic driver gets used with not much control over the output, and as the error message said, "Some System printers could possibly mess up the output".
Is this printer or its driver not able to process Postscript? If not, then what printer should I choose in the AutoCAD Plotter Manager?

I am pretty certain that I specified AutoCAD to use Postscript level 2 for my last printer: L7680 connected by USB. My search results imply that neither the 7310 or the L7680 are Postscript capable, but I could not find anything difinitive on the HP website. Could someone tell me difinitively if these and the Officejet 7130 (needing repair) which I have also used with AutoCAD are capable of Postscript?
If not, then the drivers for the 7130 and L7680 must have done the translation. Is this just a problem in how the 7310 is configured? See my other thread: Printing Blocks and Bands of Color.
The AutoCAD support site says that HP supplies drivers for AutoCAD, but I could not find any. Can you post a link?

Similar Messages

I need instructions on how to setup officejet 8500g

I need instructions on how to setup officejet 8500g
This question was solved.
View Solution.

Hello Steve1869,
You may want to re post your question on the "Other printing questions" forums or visit "Hp Support" which will have the printer manual for better results as these forums relate more to iPrint,ePrint, Print Apps, Google Cloud Print and other web services.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
(Although I am employed by HP, I am speaking for myself and not for HP)

HP Officejet 7310 no longer in my Printer setup

I recently installed a new printer in another location - HP Photosmart 7520. On returning to my home location, my HP Officejet 7310 is no longer a choice for my printer output. I have tried to reinstall the 7310 and I keep getting an error message that it is incompatible with my system (but nothing has changed since I last used it, other than the addition of the 7520.

Hey @Wunitacharles!
Thank you for posting on the HP Forums!
I should be able to provide some suggestions regarding the computer not locating the Officejet 7310. How do you have the printer connected to the computer? Is it plugged into the computer with a USB cable or is it networked using an ethernet cable to the router?
If you are getting an error saying the printer is not compatable I recommend uninstalling the HP software. I understand you have tried this already but after the uninstall is complete it would be a good idea to perform a disk cleanup in the computer. A disk cleanup will improve computer performance and clear temporary files that may cause issues during the install of software. Once the disk cleanup is complete you should restart the computer and re-install the HP software.
To uninstall HP software click here:Uninstalling HP Software
To perform a disk cleanup click here: Performing a Disk Cleanup
To download the HP software click here: HP Software and Driver
Please post back with the information on how the printer is connected and I should be able to provide some more help!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

What is an Error: 0x8477e630 and how do I fix it on an HP Officejet 7310 All in One?

What is an Error: 0x8477e630 and how do I fix it on an HP Officejet 7310 All in One?

I did a Google search on Error 1450, and it seems to be a 'lack of resources' issue within windows. Not related to iTunes.
Maybe shut down all other programs (including the TSR programs you may have loaded) and see if it helps?

Device Manager reported driver missing for Officejet 7310 printer

I used the full-feature install software downloaded from HP site to setup an Officejet 7310 printer on a Lenovo T540p laptop with Windows 8.1 64-bit OS. The install and the printer appear to work correctly as I can print and I can also scan from the HP Solution Center utility. However, the Device Manager reports two errors/anomolies as follows.
Under the "Multifunction adapters" entry the Officejet 7300 series Properties shows the Device Status as:
This device is disabled. (Code 22)
Click Enable Device to enable this device.
Under the "Other devices" entry theOfficejet 7300 series Properties shows the Device Status as:
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver.
I find this a bit baffling as I believe the install software is supposed to include the driver(s), plus the printer seems to function (which could be due to default Microsoft drivers).
Any thoughts on how things got in this state and how to recover would be deeply appreciated as I prefer to not "ignore" the error messages.
Thanks,
Glenn
This question was solved.
View Solution.

Yes I was able to remove the USB instance and rename the network-connected printer instance as the sole printer. I thought that should work, but I was a bit paranoid given the other weird things that happened with the package install.
I'm good to go; thanks again.
Glenn

Software and Driver Installation for HP Officejet 7310 Crash on my new laptop running Windows 8.1

I am trying to load the software and drivers for my hp Officejet 7310 on my brand new Lenovo laptop which runs windows 8.1. I had successfully loaded the software last week. Unfortunately I lost the disk drive on my 2 week old computer. The store gave me another brand new Lenovo laptop. On the new laptop I get errors when I try to load what I think is the same software that I loaded on the other computer a week ago. I downloaded the software from the hp website.
The driver software download fine. Originally it then unzipped and a nice interface came up. I think I clicked the load button. A message box came up saying that it could not find a certain file in appData\local\temp\7xxx... I tried the download and install several more times. I think I then did windows updates and registered my version of office. I was thinking that with the other computer I must have had the computer in a different state such that the drivers and software installed without a hitch.
Things seem to have gotten worse. I do not get as far. It still downloads fine but now after unzipping rather than the nice interface with the "load" button I get the a message box.
The latest error is in a message box with the heading "Microsoft Visual C++ Runtime Library". The error says that Program:c:\users\...\appData\local\temp\7zS4237\setup.exe This application has requested the Runtime to terminate it in an unusual way.
I was able to connect the printer through the "add Printers" and am not actually too worried about having the whole "HP Solution" with the scanning interface. I am worried that this error will cause me problems in the future with other things. Thanks in advance for any help.
I saw similar issuesdiscussed on the web and have tried several things. I really do not want to reload the OS and start again. We have barely used the system and I have no idea how this problem occurred and so I would not know how to prevent it from happening again. I did stop and start the print service. I was tempted to "totally unload the hp print drivers" but the file names in the posted instructions did not exactly match my files. Another post mentioned making sure that I had the latest version of Adobe Flash Player loaded. I went to the adobe site and it said that it is part of windows 8.1's internet explorer. I ran the test and it seemed to work.
Could the HP installation failure have corrupted my version of Microsoft Visual C++ Runtime Library?
Thanks in advance for your help.

Hi Karen_M2,
Thank you for your response!
The HP software does require the C ++ run-time libraries in order to install correctly. Please see this guide, Microsoft Visual C++ Runtime Error May Display When Installing Certain Printers.
Here are the differences between the four types of uninstall:
1
Removes the Windows device discovery (Plug and Play) entries from the Windows registry. After running level 1, connect the USB cable to the all-in-one and let Windows try to discover the device again.
2
Performs Level 1 and removes the software drivers. After running level 2, run the all-in-one installer and use the "Add a new device" option to attempt to reinstall the all-in-one again.
3
Performs Levels 1 and 2 and removes the HP Photo and Imaging software. You must completely reinstall the all-in-one software after running level 3.
4
Performs Levels 1, 2 and 3, and removes HP Software Update. You must completely reinstall the all-in-one software after running level 4.
If you have an HP computer I would not recommend the L4 uninstall as it would also uninstall any other HP software you have installed besides your printer.
Definitely continue going through the post I had provided, Re: Error message Microsoft visual c++ runtime library.
If that still does not resolve your issue, or you cannot uninstall using one of the four methods above, then try the following:
Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. How to Disable Antivirus in Windows 8?
Disable any firewall programs. Windows Firewall from start to finish.
Create a new user account. Managing User Accounts and Logins (Windows 8).
Reinstall using the HP Printer Install Wizard for Windows.
Hope this information helps, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP officejet 7310 fax will not complete

I have a problem with outgoing faxes. Sending fax, the dialer reaches the number and connects and the fax starts processing. Screen says Faxing Page 1. Stops there. Line is held open and never finishes the fax. Need to cancel to get phone line back. A fax sent to the HP test line is fine but no other numbers work to fax to. Fax test says all pass. I am on a Comcast VOIP.

Hey @Ggrib,
Welcome to the HP Support Forums!
I understand that you're experiencing an issue when sending faxes from your HP Officejet 7310 All-in-One Printer when using a VOIP telephone line. I would like to offer my assistance today with a possible resolution for this faxing issue. The reason that I can only offer you a possible resolution is because of your VOIP telephone line. Faxing is old analog technology. Nowadays phone companies offer digital lines, like your VOIP line. Digital lines are OK to use but there is a lot more static noise interference on those lines and the transmission rate of data over those digital lines is much faster than analog. These faster transmission speeds can also cause fax packets to be lost when sending or receiving faxes and result in a fax communication error. There are settings we can adjust on your HP Officejet to eliminate as much noise interference from the line and slow down the transmission speeds. However, faxing is not guaranteed to work with the VOIP Service - (Source). With that being said, please follow the steps below to adjust the appropriate settings.
Step 1: Adjust Fax Speed:
Press the Setup button () on the product control panel.
Press the down arrow () to select Advanced Fax Setup, and then press OK.
Press the down arrow () to select Fax Speed, and then press OK.
Press the down arrow () to select Slow, and then press OK.
Step 2: Disable Error Correction Mode:
Press the Setup button () on the product control panel.
Press the down arrow () to select Advanced Fax Setup, and then press OK.
Press the down arrow () to select Error Correction Mode, and then press OK.
Press the down arrow () to select OFF, and then press OK.
Now that the settings have been adjusted, please try sending a fax again.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

How set up officejet 4635 to my ipad

How to set up my ipad to my officejet 4635

Hi,
Here's a link to some tips on how to setup your printer with your iPad:
http://www8.hp.com/us/en/support-topics/mobile-printing/how-to-print-mobile-devices-ipad-iphone.html...
AirPrint is the inbuilt wireless printing function within your apple device and e-print is an app that you'll need to download. e-Print will allow you to print remotely using a mobile device.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How to setup QoS for IP/Mac Address WRVS4400N

I need some help setting up QoS for two Cisco/Linksys devivces on my network.
Network devices are Comcast SB6120 modem into WRVS4400n (v2.0.2.1 firmware) that divides into one 24 port gigabit Netgear unmanaged switch, 1 port into AT&T Cisco Microcell, 1 port to HP Officejet 7700 wired printer. Unmanaged switch has approx 10 devices attached (including another 8 port unmanaged gigabit switch). 3 static leases are defined for the network for three devices (HP OJ 7700 printer, Cisco/Linksys PAP2 VOIP adapter, windows home server v1. DHCP is handled by WRVS4400n. Comcast service provides 12mbps of service upstream, 4mbps downstream.
Need to setup QoS for AT&T Microcell and PAP2 VOIP adapter. The real issue that I can't figure out how to configure is IP based priority access. I can do rate control for an IP address but can't figure out how to specify priority control for an IP.
Here are my the current config questions:
1. Bandwidth management page: For the microcell device plugged into port 1, do i set the default CoS to 4 or 1?
2. Bandwidth management page: Should the bandwidth management type be set to priority? I assume yes since I need to define the UDP/TCP ports for priority. The major issues here are
a) one of the ports the Microcell uses is secure https (TCP 443) which is could also be used by any other internet device.
b) can't specify priority for the PAP2, since it's behind the unmanaged 24 port switch
3. QoS setup page: Do I need just 2 queues (one for the port ID for the Microcell and one for the IP address of the Linksys adapter)?
4. QoS setup page: I assume I need to define DSCP for the unmanaged switch but not sure how to tie a queue to an IP address
4. QoS setup page: Shoud priority 0 be set for the most important queue (microcell) and the priority 1 CoS be for the VOIP adapter? Again, not sure about how to define priority by IP address.
5. DSCP setup page: As far as I can find, there's no documentation on how to setup this page.

That's what I do. I keep it simple, one calendar, one set of contacts.
iCloud is really the simplest way to go, as it will sync your (eventual) single Contacts and Calendar across all your devices.
I would:
Figure out which single calendar (in Calendar.app) and contacts (in Contacts.app) that you want to keep.
I'd make a backup of each one. For example,
in Contacts, File > Export... > Contacts Archive...
in Calendar, File > Export... > Calendar Archive...
Make a backup of the other calendar events and contacts that you want to save.
delete all the contacts and calendars from your phones and your iPad.
add the contacts and events from the backups to the single calendar in Calendar.app and your contacts in Contacts.app on your iMac. There is probably some way to export the contacts and events you are adding, and then combine them, but you could also just add them manually.
Then when you configure all your devices for iCloud, they will be all synced automatically.
Message was edited by: arthur

Xp-windows7 64 bit uprade-install failures on officejet 7310

1 )successfully did a clean windows 7 (64bit) install on my hp multimedia desk top
2) down loaded driver (full suite) AIO_CDB_Net_Full_Win_WW_130_141.exe for my officejet 7310
3) installed with hardwire option via a router
4) install process found and recognized my 7310 via the router and ask me to select it- I did
5) in the final steps of install it put a big red X in the picture between the router and the printer and said “ could not complete the install because it could not find the printer
6) tried everthing possible-uninstall/reinstall-reset router-re-download the software-add a printer -failure-try windows “add a printer” –failure
6A) there are recent upgrades to the window7 64 bit driver due to “having your printer become invisible?” on the system-they require a succesfull install to be upgraded-can’t use them
7) TESTS PERFORMED
               Install with direct ubs connection-everthing works fine
               Try printing-via router-no direct ubs connection-works fine
               Try to open solutioncenter to scan-failure-“printer not installed ” or s/w install not complete etc.
I need a printer on my router since I have four computers-3 on xp
HELP anyone have this happen and know how to fix it

If there were a problem with .NET Framework 4.5.1 there would be numerous complaints about it. The last complaint posted about it turned out to be some file on the OP's system that was causing a conflict trying to install an application but gave
an error blaming .NET Framework. Once the offending file was identified and removed the application installed without any error.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Printing with HP Officejet 7310 Automatic two sided and 2 pages on one sheet

I am trying to print from power point slides with my HP Officejet 7310 with Automatic two sided printing capabilities and I would like to print 2 slides on each page. Can this be acomplished and is so how? Thanks

Not necessarily the cleanest, but you can print to a new PDF file. In the printer properties, select the page size, and multi-up option. You might also find that on the pdf printer menu (at least I have that on my AA8.1.2). You may still have to select the paper size, since it is different from the original.

Printer Driver HP Officejet 7310

I am so frustrated. I have reinstalled the driver for this HP OfficeJet 7310 a zillion times. I have attached a Bluetooth adapter to the USB port on the front of the printer. When I go to Bluetooth Wizard, my PowerBook can see the printer on the configuration screen, but then it says "Driver Not Installed". Obviously, the computer is smarter than the printer and HP's website which offered no help. After speaking to someone in India for 30 minutes, he told me since my printer was just out of warranty it would be $30 to fix the problem. There has to be something that I have overlooked. I have removed the driver, reinstalled, etc. When you Google HP Printers and Driver Issues with Macs, you get tons of feedback. There is obviously a problem. Help me Obi Wan Kenobi, you are my only hope>>>>>

Your printer is designed for USB or Ethernet. It is not designed to connect via BlueTooth and the driver you have is not designed for use on a BlueTooth network. If you need to connect to the printer wirelessly then you need to buy a wireless access point that can connect to the printer's USB port or Ethernet port. A wireless access point is an Ethernet device, not a BlueTooth device.
Just because you can connect your mouse and cell phone with BlueTooth doesn't mean every peripheral can. Your mouse and cell phone are designed with BlueTooth communications built-in. Your printer is not. BlueTooth is intended for short-range wireless communications where the communicating devices are not more than 10 meters apart (maximum.) BlueTooth uses different communication protocols than Ethernet.
I suggest you purchase an Airport Express. You can plug it into a nearby AC outlet wherever the printer is located. You can connect the printer to the Airport Express with either a USB cable or an Ethernet cable. The Airport Express User Guide will explain how to configure and set up the Airport Express as a remote access point. Your Powerbook will communicate through the Airport card installed in the computer.
I hope I've made this clear.

How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete

How to Setup Officejet 7310 in AutoCAD?

Similar Messages

Maybe you are looking for