Hp color laserjet mfp 177fw digital fax setup

Dear Folks,
Does hp color laserjet MFP 177 fw supports digital fax ( receive fax to network folders or email without printing both color and black) .please help me in this regard.
Binjack

Hi,The M177fw model do not support recieving faxes digitally to a computer, it only allow a recieved fax to be printed. You may find the Fax smart software features section below, Fax to PC is not a feature of the software for your printer:http://store.hp.com/UKStore/Merch/Product.aspx?id=CZ165A&opt=B19&mastersku=CZ165A&masteropt=B19&sel=BPRN&#merch-tech-specs (Just to compare, below are the same specifications for the M225dw which do offer a such)... Regards,Shlomi

Similar Messages

HP Color LaserJet MFP M476dn - Impossibly slow ethernet

Win7 - 64 bit on typical small office network setup (Comcast internet, Linksys Router, half computers on wifi, half wired).
Upgraded from terrible old Brother multi-function printer.
We print some files from remote desktop (using redirected printers.. as in, the remote desktop session has the ability to print through our computers to our local printer).
Sometimes the files are large (10-20mb).. and the Brother printer sends it right over in about 1 second.
New HP Color LaserJet MFP M476dn goes as slow as you can imagine.. I can sit a watch the printing dialog box and watch it 256kb........512kb........768kb.......... out of 15mb.
I have tried a bunch of combinations of different drivers (PCL5 etc), link speeds on the printer, RAW processor, Port types, and so on, but can't find the right combination..
I should mention that we are using the exact same ethernet cord as the old Brother printer. Also, the HP is set to a Static IP.
Please help!
Thanks,
Eric

I had this exact problem. I've had the printer for about a month and it was very fast at first. I really like the printer, especially the duplex ability. Over the past week or so it became excruciatingly slow. I just finished downloading the new firmware and drivers but before installing them something made me check the Ethernet cable which is plugged into my Airport Extreme 802.11n Gigabit router. It was loose and partially pulled out so I plugged it back in all the way and the printer went back to printing the way it is supposed to.
You might want to give this a try. Perhaps try another Ethernet cable or direct connection via USB if that doesn't work.
Frank

HP Color LaserJet MFP M570dw and HP Web Services

Hi,
I have a HP Color LaserJet MFP M570dw printer and have tried to enable the HP Web Services, but without success.
My printer is configured on a fixed ip-address, with a default gateway and of course with static DNS servers (8.8.8.8 and 8.8.4.4).
Every time when I try to enable the Web Services feature I get the error message "Connection error. Check your internet connection.".
My internet connection is working fine and the printer is able to communicate thru the firewall fine too. When I do some tracing I see the printer communicating to the public ip-address "23.21.172.122" but there is no response comming back. So I assume the problem is external and not related to my internal configuration. I have tested this with a fully opened firewall (allowing all communications from my LAN to the Internet) with exactly the same results. There is no answer comming back from the ip "23.21.172.122".
Also I can't find the HP Color LaserJet MFP M570dw printer in the supported HP ePrint printerlist.
The 400-series is supported, the 500-serie is not mentioned.
But since the webinterface of my HP Color LaserJet MFP M570dw printer is giving me the HP Web Services configuration page, I asumed this type would be supported too...
Does anyone have a clue how to get ePrint working on the HP Color LaserJet MFP M570dw printer?
Is there anyone who got the HP Web Services working on a HP Color LaserJet MFP M570dw printer?
Kind regards,
Rene.
This question was solved.
View Solution.

Hi Rene,
Have you tried updating its firmware version?
The latest firmware should improve the web services connectivity and may help resolving such an issue:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5210913&sp...
Also be sure to follow its steps which may help resolving a connection issue:
• Improvements made for connecting to HP Web Services.
NOTE: After updating from firmware datecode 20121002 to firmware datecode 20121019, if a connection to HP's Web Services cannot be established a Security Reset should be performed. Use the following steps to perform a Security Reset.
1. At the printer's touch screen control panel press the wrench & gear icon (Setup menu) at the top of the touch screen.
2. Using the scroll arrows on the right side, scroll until Network Setup appears then press Network Setup.
3. In the Network Setup menu select Security
4. Using the scroll arrows on the right side, scroll until Reset All Security appears and then press Reset All Security. Allow the reset to complete before attempting to connect to HP's Web Services.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Color LaserJet MFP M476nw Fax Test failed

I bought a new LaserJet M476nw, but my fax test fails everytime through the laserjet setup and HP utilities software. The Laserjet is connected on a network and using Vista.
I have a dedicated fax line connected from the jack to the icon with the jack on the back of the laserjet. I can hear dial tone on the fax line when connected to a phone. I have called the fax line and it is rings normally and no answer. I also tried connecting a phone to the laserjet phone icon, while the fax line is connected to the laserJet, I can hear the dial tone from the phone.
I do not know what else I should do to get the fax test to pass, so I can start faxing on this new machine. Any suggestion is appreciated.
Mike
This question was solved.
View Solution.

Actually this problem is now solved.
It was a brand new machine, so since I really didn't have any data so I did a restore default. It rebooted and now it passes.

HP Color LaserJet 2840 -- reinstalling driver -- HP Setup Assistant failing

Hello! Any tips on how to get my MacBook Pro to identify my HP Color LaserJet 2840 printer? I'm trying to reinstall the driver, but in the HP Setup Assistant, the printer doesn't show up.
I tested the same printer and USB cable on my older iBook, and everything works just fine. The printer is an all-in-one device, and it works just fine as a standalone copier.
On my MacBook, everything worked great two days ago, but I tried to print today and got a message "printer not responding" in the print queue. I tried to troubleshoot to no avail:
-- Turned printer and computer off an on several times.
-- Ran disk warrior, rebuilt directories and repaired permissions. Still notta.
-- Then uninstalled the HP 2840 print driver, downloaded new ones, tried to reinstall, but the printer isn't showing up in the HP Setup Assistant.
-- In Printer Setup Utility, ran Reset Printing System.
-- Again tried to run HP Setup Assistant, but still the printer isn't showing up in the list for installation.
Any tips would be much appreciated! Thanks!

Hi BDAqua -- Thanks for the tip. Should have thought of that. Apparently my USB ports aren't working. Tested a memory stick and my iPod, and neither device shows up on the desktop. My firewire does seem to work -- just backed up everything on an external hard drive.
The profiler shows these USB devices:
-- USB Bus / IR Receiver
-- USB Bus
-- USB Bus / Bluetooth Host Controller
-- USB Bus / Apple Internal Keyboard/Trackpad
-- USB High-Speed Bus
Thanks again. My next step is to call AppleCare.

Hp color laserjet MFP M476dw

Hi,
My printer was working earlier this morning but now none of the office computers are able to print any jobs. I ran a Wireless Network Test report and everything is fine. I also ran a configuration report and nothing shows up as an issue.

The heat from your M476 combined with the natural humidity of the laser toner fusing process is sealing your envelopes. You probally need to find a way to reduce the amount of heat that is being used when printing envelopes. Normally there are two places to look for configuring the heat. The first is the pritnt driver itself, which you can switch around with UPDs and different printer languages in hopes that one works better than another. The other is a print driver configuration for the paper type you are printing from. For example if you are selecting the Envelope #10 paper size or some custom size. Each paper type contains commands that the printer uses to heat up and cool down the fuser so that the toner gets properly bonded to the paper.

Scanning to HP Color LaserJet MFP M476nw

I just installed the software for the MFP476nw. When I scan an 8.5 by 11 page, it scans it onto a larger size which must be cropped before saving as a pdf. This creates a lot of work for a large document when you have to crop each page before saving. What is the best way to scan 8.5 by 11 page to the same paper size in pdf using the MFP475nw?
This question was solved.
View Solution.

Sure, on Mac you may use the HP Scan software, located under Applications > Hewlett-Packard.
Once clicking on New Scan you may have to click the Show Details button and change the Scan Size to US Letter.
Another altervative is to scan using the OS tools such as Apple Preview, Image Capture or the Printers & Scanners screen.
Be sure to undeck the Custom Size option within the scan settings and then select the US Letter size.
You may find a detailed instructions for those in the fofllowing link:
http://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5245583&docId=emr_na-c03415763&docLocale...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Reset Password - HP Color LaserJet MFP M277dw

I forgot the printer password and cannot find out how to reset to factory settings (or the password itself) without entering it. How can i reset the password? (To be more precise the password I set is not accepted afterwards but probably I misspelled it twice ... (length 20, lowercase characters and numbers)

It is a bug in the web-interface! Solution: The length of the password has to be max. 16 characters. (While setting the password there is no warning.But when trying to change (secured) settings later you have to use the first 16 characters of your password!) PS: To reset the printer I pressed the lower left corner of the touchscreen + Home + Return while powering on the printer

HP Color LaserJet Pro MFP M177fw fax to pc

I have just bought this printer and want to msend faxes to my pc. I was told by PC world that it had this function. So far I cant find it can anyone help. Many thanks

Hi ,  I would be happy to help shed some light on the issue your are having with trying to setup this Color LaserJet Pro MFP M177fw to receive your faxes on your PC.  I have looked into this further for you, and I'm pretty sure this model doesn't support receiving faxes on your PC. You can double check to make sure I haven't missed it in the COLOR LASERJET PRO MFP M177 User Guide.
I did however locate a different model, where in the manual does provide instructions on how to set this feature up but it is a black only printer. Its the LaserJet Pro MFP M225dw (again black only, no colour.)
Step 5 (Optional): Configure settings for receiving digital faxes (Windows) The product can save incoming digital faxes to a computer folder. Use the HP Digital Fax Setup Wizard to configure the settings. This feature is available only for Windows. 1. Click Start, and then click Programs. 2. Click HP, click the name of the product, and then click Digital Fax Setup Wizard. 3. Follow the on-screen instructions to configure the settings.  HP also has this feature available on it's HP Officejet Pro 8610/8620/8630 e-All-in-One Printers, which are Colour Inkjets. Some of the commerical products also support this feature but I'm unsure of which ones. I would really suggest contacting HP Shopping for more information on these models.  Hopefully this has answered your questions, and please let me know if there is anything else I can do to help.   Thanks,

Cannot print to Color Laserjet Pro MFP M177fw

I have a HP Color Laserjet MFP M177fw hard wired to my router. I can print from internet explorer, chrome and other applications such as Office and Notepad, etc. I cannot print from Adobe Acrobat Pro XI. I can get to the print dialogue page and hit print but nothing comes out and I can't see any jobs stuck in the print queue.
I am using an HPtouch computer with Windows 8.1

I have the same problem for my 177fw. It does connect to my desktop via wireless connection when I check the control panel, yet no printing job could be done and they just disappear in the queue list. Sorry to say that, Ms. Helen-Hua, but I don't think "trying to print as image" can help to solve the problem no matter what result it is. For most people I don't think they would accept a printer that cannot print a simple text document.
Look forward to receiving working solution.
PS. The wireless connection has absolutely no problem for my win 7 laptop and my desktop which is formerly win 7. The problem only happen when the computer is upgraded to win 8.1 and another brand-new win 8 desktop.

Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device

Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device. I can s end a Fax and I can print documents. I can also, now, scan to computer. I have changed the phone line twice, restarted the router, restarted the computer, and made sure the front panel was lit when setting up the Digital Fax folder. I am on a Homegroup network, with both wireles and ethernet computers. When I view the network, it sees both computers (wireless laptop and enthernet desktop), the printer, scanner, and router (VerizonDrive). I recently had to reinstall Windows 7, where Digital Fax to Folder Setup previously worked, and now it doesn't. The network shows up as Network 3. When I try to view the network map, I get the error message that Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network. What am I doing wrong?

Hello @JiffyFingers and Good Afternoon
From what you have described, and from the work you did on another thread, I believe you'd get better assistance talking to either Microsoft or your router manufacturer. With not being able to create the network map, that's something a bit more intricate than digital fax setup
You can have a look at this Windows cannot create the network map. Responses from other devices on the network are delayed or th... Microsoft thread as well, and you may be able to figure it out from there.
Hope that helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

HP LaserJet MFP M476dw paper size mismatch when copying or scanning from ADF

We have HP Color LaserJet MFP M476dw that has an issue when copying or scanning from the ADF.
Put a single A4 sheet in the ADF and choose copy, with all settings correct & no resizing, and the output copy is moved down the page (increased top marging by a couple of inches).
My initial thoughts were a paper size issue (e.g. treating A4 as Letter or vice versa) but all settings look correct. I have even done a reset and started over and the problem remains.
If I take the original and place it on the flatbed and copy from there with all the same settings then it works fine.
There is a similar issue when scanning from the ADF. Again, scanning from the flatbed works fine.
I've tried all I can think of. Does anyone have any further suggestions? Could it be a fault in the ADF?
Here's the full device settings info:
Device Configuration
[Shop for Supplies][Support]
Product Information
Product Name:
HP Color LaserJet MFP M476dw
Formatter Number:
YF10C9X
Serial Number:
CNB7G2H6T9
Service ID:
24113
Firmware Datecode:
20131122
Disable Fax:
No
Telecom Version:
05-031-001
Location:
UK
ADF Installed:
Yes
Max Monochrome Print Quality:
600x8
Max Color Print Quality:
ImageREt 3600
Controller Number:
72
Duplexer Version:
0
Device Description:
HP Color LaserJet MFP M476dw
Language:
English
Default Settings:
Self-managed
Asset Number:
Your Company Name:
Contact Person:
Device Location:
Geo Location:
Product Security:
Off
Wired HW Address:
fc:15:b4:78:28:46
Wireless HW Address:
54:35:30:2f:d7:fc
Network In Use:
Wired
Host Name:
NPI782846
IPv4 Address:
192.168.9.18
IPv6 Address:
FE80::FE15:B4FF:FE78:2846
Total Memory:
256 MBytes
Available Memory:
117.7 MBytes
Installed Personalities and Options
PCL6
(20040201)
AirPrint
PCL
(20040201)
PDF
(20040201)
PS
(20040201)
USB Flash Drive:
Empty
Impressions
Total Impressions:
10684
Monochrome Impressions:
4799
Color Impressions:
5885
Total Equivalent Impressions (A4/Letter):
10684.0
Monochrome Equivalent Impressions (A4/Letter):
4799.0
Color Equivalent Impressions (A4/Letter):
5885.0
Duplex Sheets:
1223
Jam Events:
0
Mispick Events:
4
Photo Color Impressions:
0
Photo Monochrome Impressions:
0
USB Flash Drive Insertions:
0
Images Scanned to USB Flash Drive:
0
Copy Flatbed Images Scanned:
373
Copy ADF Images Scanned:
409
Copy Monochrome Impressions:
1122
Copy Color Impressions:
102
ADF Images Scanned to Host:
0
Flatbed Images Scanned to Host:
0
Images Scanned to E-mail:
0
Images Scanned to Network Folder:
0
Fax ADF Images Scanned:
23
Fax Flatbed Images Scanned:
1
Fax Impressions:
18
Images Sent from PC:
0
ADF Images Scanned:
1149
Flatbed Images Scanned:
779
Scanner Jam Events:
8
Paper Settings
Default Paper Size:
A4
Default Paper Type:
Plain
Tray 1 Size:
A4
Tray 1 Type:
Letterhead
Tray 2 Size:
A4
Tray 2 Type:
Plain
Paper Out Action:
Wait Forever
Manual Feed:
Off
Duplex:
Off
Bind:
Long Edge
Print
Auto Continue:
Off
Number of Copies:
1
Courier Font:
Regular
Orientation:
Portrait
Monochrome RET:
On
Wide A4:
No
Monochrome Resolution:
600
Monochrome Bits per Pixel:
8
Color Resolution:
600
Color Bits per Pixel:
32
IO Timeout:
120 Seconds
Jam Recovery:
Auto
Personality:
Auto
Print PS Errors:
Off
USB Flash Drive
Print Documents:
Number of Copies:
1
Paper Size:
A4
Paper Type:
Plain
Fit to Page:
On
Collation:
Off
Output Color:
Color
Print Photos:
Image Size:
10 x 15 cm
Paper Size:
A4
Paper Type:
Plain
Lighter/Darker:
<-----*----->
Number of Copies:
1
Output Color:
Color
Scan Settings:
Scan Resolution:
150
Scan File Type:
PDF
Scan Paper Size:
A4
Flatbed Scanner:
Single Page
Document Feeder:
1-Sided
File Name Prefix:
scan
Output Color:
Color
Copy
Optimize:
Auto Select
Lighter/Darker:
<-----*----->
Paper Size:
A4
Paper Type:
Plain
Collation:
On
Number of Copies:
1
Reduce/Enlarge:
Original=100%
Draft Mode:
Off
Tray Select:
Auto Select
Two-Sided:
1-Sided to 1-Sided
Multi-Page Copy:
Off
Fax
Your Company Name:
HP Fax
Answer Mode:
Automatic
Rings to Answer:
2
Distinctive Ring:
All Rings
Dial Prefix:
Off
Fax Resolution:
Fine
Lighter/Darker:
<-----*----->
Fit to Page:
On
Glass Size:
A4
Dialing Mode:
Tone
Redial if Busy:
On
Redial if No Answer:
Off
Redial if Comm. Error:
On
Detect Dial Tone:
Off
Billing Codes:
Off
Extension Phone:
On
Stamp Faxes:
Off
Private Receive:
Off
Confirm Fax Number:
Off
Allow Fax Reprint:
Yes
Print Duplex:
Off
Fax/Tel Ring Time:
20
Fax Speed:
Fast (V.34)
Error Correction:
On
Forward Fax:
Off
Block Junk Faxes:
Off
Phone Line Volume:
Medium
Alarm Volume:
Medium
Ring Volume:
Medium
Key-Press Volume:
Medium
Fax Confirmation:
Never
Fax Error Report:
Never
Include First Page:
On
Auto Log Print:
On
Print T.30 Trace:
Never
Paper Types
Plain:
Normal
HP Matte 90g:
Normal2
HP Matte 105g:
Heavy
HP Matte 120g:
Card stock
HP Matte 150g:
Extra Heavy
HP Matte 200g:
Extra Heavy
HP Glossy 120g:
Glossy
HP Glossy 150g:
Glossy
HP Tri Glossy 150g:
Glossy
HP Glossy 200g:
Heavy Glossy
Light 60-74g:
Light
HP EcoSMART Lite:
Extra Light
Intermediate:
Normal2
Mid-Weight 96-110g:
Heavy
Heavy 111-130g:
Card stock
Extra Heavy 131-175g:
Extra Heavy
Hvy Glossy 111-130g:
Light Glossy
X-Hvy Glossy 131-175g:
Glossy
Card Glossy 176-220g:
Heavy Glossy
Color Transparency:
Transparency
Labels:
Label
Letterhead:
Normal
Envelope:
Envelope
Heavy Envelope:
Heavy Envelope
Preprinted:
Normal
Prepunched:
Normal
Colored:
Normal
Bond:
Heavy
Recycled:
Normal
Rough:
Heavy
Heavy Rough:
Heavy
HP Tough Paper:
Tough Paper
Opaque Film:
Tough Paper
Energy Settings
Sleep/Auto Off After:
30 Minutes
Wake on These Events
USB Job
Yes
LAN Job
Yes
Wireless Job
Yes
Control Panel
Yes
Fax Ring
Yes
Shut Down After:
Never
LaserJet Updates Settings
Check Automatically
Yes
Prompt Before Install
Yes
Allow Downgrade
Yes
Allow Updates
Yes
Miscellaneous
Extended print modes modified:
No
Very Low Setting (Black Cartridge):
Prompt
Very Low Setting (Color Cartridges):
Prompt
Low Threshold (Black Cartridge):
5%
Low Threshold (Cyan Cartridge):
3%
Low Threshold (Magenta Cartridge):
3%
Low Threshold (Yellow Cartridge):
3%
Store Usage Data&colon;
On Supplies
USB Connection:
No
Font Source:
I (Internal)
Font Number:
23
Font Pitch:
10.00
Font Point Size:
12.00
Symbol Set:
PC-8
Form Length:
64 Lines
Append CR to LF:
No

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Digital Fax Incoming Fax Notiifcation

I've set up the 8620 so a Digital Fax is sent to a folder on my Mac (lion). I've clicked the yes on Incoming Fax Notification and see nothing on the screen. I'm connected to the 8620 through a lan connection and faxes are being sent to a folder. What does the Incoming Fax Notification do and do I need to do more to make it work?

Hello @JiffyFingers and Good Afternoon
From what you have described, and from the work you did on another thread, I believe you'd get better assistance talking to either Microsoft or your router manufacturer. With not being able to create the network map, that's something a bit more intricate than digital fax setup
You can have a look at this Windows cannot create the network map. Responses from other devices on the network are delayed or th... Microsoft thread as well, and you may be able to figure it out from there.
Hope that helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

HP Color LaserJet Pro MFP M177 Series Fax sends but won't receive faxes

I can send faxes using HP Color LaserJet Pro MFP M177 Series Fax but I cannot receive them. I have faxed test pages and the setup is correct. Any suggestions?

Hello DBrad8,
Welcome to the HP Forums!
I understand you're unable to receive a fax using the Laserjet MFP M177. I will do my best to assist you! First, I need to find out what type of added features do you have on your fax line? Please post these information on this thread.
Do you have an answer machine on this line? If so, how many rings to answer is this set to?
Do you have an Internet Service on this line?
Please follow this entire HP document on Cannot Send or Receive Faxes. Run a fax test page and let me know if everything passed or if anything failed. I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.

HP COLOR LASERJET CM2320 MFP DO NOT SETUP IT ON THE WIN7 64BIT USİNG IT ON THE NETWORK

my hp color laserjet 2320 mfp is not possible to setup it on the my win7 64bits when ı want use it like network printer.But since 2 weeks ago ı can see it on the network when ı want to install it using orginal hp product sotware.When installing the software is not found by software on the network.Why ı am not able reinstall it again.But so intresting it is possible install it using win7 64bits drivers.İf ı install it by these drivers ı can not use all funtions of the printer.I want use orginal software for installing it on my computer and to use all faciliies.I tried all possibilities for windows part .Delete all drivers from pc,registry part but no solution. ı would like find a solution.ıs it possible any problem windows part if it is. what kind of problem and solution.Please give me a help...

HI DeePure,
Print out the supplies status page, and let me know if all the colors print correctly?
Do you have an extra set of cartridges we can use to troubleshoot with?
Print the supplies status page
Follow these steps to print out the supplies status page from your printer.
On the Printer’s control panel, press the Setup button.
Press the down arrow to highlight Reports , and then press OK .
Press the down arrow to highlight Supplies Status Page , and then press OK .
Figure 1: Supplies Status Page
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Hp color laserjet mfp 177fw digital fax setup

Similar Messages

Maybe you are looking for