HP LaserJet P1102w Wireless Printing - Frozen at Password
I've got the firmware and I can get to the page that lets me choose my wireless network and input my password. However, when I put in the password, the entire page just freezes - I never get to a confirmation page, and if I reload, it hasn't updated my wireless password.
Thoughts?
Hi @stralins.
I understand that after putting in your Encryption information the printer's Embedded Web Server is locking up. I can help you with this, but I will need some more information so I can provide you the proper steps.
What operating system are you using?
How to Find the Windows Edition and Version on Your Computer.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Print a configuration page to see if the printer has a IP address or SSID.
If the wireless is still flashing on the printer, then restore the printer defaults.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
(hold down the x button and when the printer makes a noise let go)
After the reset, disconnect the routers power cable, wait 10 seconds, then reconnect the power cable.
Wait till it's ready.
Try entering the Encryption information again. (if you are on a Mac, set Safari as the default browser)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP
Similar Messages
-
HP P1102w Wireless Printer will not pair with a Motorola SBG6782-AC Wireless Cable Modem Gateway
I previously had AT&T U-verse Internet using an Arris IPDSL NVG510 Wireless Modem Gateway. My HP Laptop running Windows 8.1 and the HP LasrJet Pro P1102w Wireless Prnter routinely & automatically connected to the NVG510 Wireless Network without any problems over the past two years, and the wireless Printer worked without problems. I recently replaced the AT&T U-verse Internet connection with a 25 Mbs Comcast Xfinity Intrnet connection, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway. My HP Laptop running Win 8.1 Pro connects to the Network and accesses the Internet with no problems what-so-ever; However, the HP LaserJet Pro P1102w wireless Printer does connect to the Wireless network and I cannot Print at all from my laptop. I have tried all the P1102w Wireless Printer Setup suggestions from the HP Printer Support Site, but to no avail. I have also updated the Printer Firmware and Loaded the latest Full Product Installation & Driver Software. I have tried and re-tried these suggestions over the last two days, but with no luck. I would greatly appreciately any help from the experts in this Forum. to get the printer to work wirelessly, since we also wirelessly print to this printer from IPads and other wireless laptops.
Hi , I see that you are having issues connecting the printer to the new router. I would like to help you. I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise. Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page. If the network name has any spaces or special characters, the printer may not recognize it. The printer is only capable of sending/receiving in the 2.4 ghz band. If it is set to 5 GHZ network you may need to change to 2.4 ghz. (rename the 5 ghz or shut it off)
The WPA key setting needs to be on AES to work correctly not TKIP.Multi casting needs to be turned on.
Firewall on router has to have open ports for printer.
If you have Mac Filtering you need to give printer hardware address from Configuration page.You might need to contact your router company for further assistance to check those settings. Try running the Wireless Configuration Wizard from the HP software to configure the printer over the network. If you appreciate my efforts, please click the 'Thumbs up' button below.If you have any issues, please let me know what steps you have taken and the results. Thank You. -
When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.
Your AirPort Extreme supports WPA.
WEP is outdated and considered fairly useless, so use WPA.
Be sure you are using AirPort Utility 5.6. If you are not running Lion then use AirPort Utility 5.5.3.
AirPort Utility 6.0 cannot administer 802.11b/g base stations. -
HP Laserjet p1102w Wireless Problem
hi
I have HP Laserjet p1102w . All Drivers and updates are installed correct and diagnostic utilities can not help.
the problem is , If First I turn on the PRINTER and then the wireless MODEM ( router ) , It works perfect and it pronts wireless , BUT if first I turn on the wireless MODEM ( for ex. it is on from yesterday ) and THEN I turn on the PRINTER , It can not print and wireless printing does not work , at this time the wireless lamp on printer is on ( not blinking ) and if i press the wireless botom on printer , it flashes and can not find the network.
I upgrade the firmware and installed all the updates , ... changed windows and ... but the problem did not solve!
can u please help me how i can solve this problem.when i want to print from web , I have to turn of the modem and then turn on the printer and after that turn the modem on again , which in many situation the router is not acceceble !
many thanks in advanced.i changed my wirelss router and now my printer will not recognize it. What di I do to pair the two again. My computer had no problem seeing the new router.
-
Hp laserjet p1102w: wireless not working: unable to change to new network
I just moved and established a new wireless network to which I want to connect my printer.
I have followed instructions on HP's websites. All goes well until I attempt to open "html config..." on the printer utility screen. nothing happens after selecting "html config...".
printer works fine if connected via usb; doesnt work wirelessly from laptop, iphone or ipad. I would like to continue to use the laserjet wirelessly.
any suggestions are appreciated!"OK let's try this again. What is the make and model numbers of all you network equipment? How is everything connected? OS of computers? Please explain."
Make & model #:
printer: hp laserjet p1102w
cable modem: arris dg860
I am printing from a macbookpro (OS X 10.6.8), iphone 5c and an ipad.
the wireless printing worked just fine from the laptop, my iphone and ipad while at my previous address where I shared a wifi with roommates. I now have my own wifi via cable (tv) that has a different name than the previous wifi.
this printer currently only prints via USB. the wireless printing doesnt work from any device.
messages:
laptop: printer offline
iphone: no airprint printers found
ipad: no airprint printers found -
HP LaserJet P1102w Wireless setup
So I'm currently living on camus, and I had finishing building my own desktop, without CD reader. And my printer is in no position of reaching my USB ports for my desktop. I'm trying to setup my printer for wireless printing, but my campus uses, Myresnet. Basically in order to setup / allow things to use wifi here I need to put in their MAC address. Anyone know how to find the MAC Address AND set up my wireless printing WITHOUT the CD? Also I do not have my manual / recipe. It's been several months, and previously I was using my laptop to print via wired cable, but it seems tedious to plug in my laptop and print things on that. If it can't be done. I guess I'll have to bite the bullet.
Hi @VertTeaCal ,
I understand that you would like to setup the printer over the wireless network, but you need the Mac Address for the printer. I would be happy to help you out today.
You can get that information by Printing a Configuration Page.
I have provided a document for Setting Up the Printer for a Wireless Network for the HP LaserJet Pro P1102w Printer
that you may take a look at.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Hp Laserjet P1102W Wireless issue
I have an HP Laserjet P1102W. My issue is that I just upgraded my router and I have three computers all tied on. No problem with the network. I tried to print wirelessly with the printer and all I get is error messages. So I tried uninstalling and reinstalling the printer. When it comes to the wireless install I connect the usb cable and it connects to the wireless network but when getting the ip address stage it keeps saying printer is connnected to the wireless network but printer cannot communicate with the computer. I tried a straight usb conncection and no problems whatsoever. Can someone tell me what could cause this. Also the operating system is Windows XP. Thanks for any help.
Is the computer it was installed on connected to the wireless network?
The computer being connected by Ethernet to the network is the most likely cause of the issue you are experiencing.
What brand and model is the router?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Resolution - Printing HP LaserJet & Linksys Wireless Print Server WPS54GU2
Hello Guys:
After trying to figure out for 10 days and calling HP, Applet and Linksys support, i finally am able to print to my printer.
I have iMac running Tiger 10.4.8. I have a HP LaserJet 1012 Printer connected in a USB Port to the Wireless Print Server WPS54GU2. This is what I did to get it working.
First install the following drivers:
1) Go to http://www.linuxprinting.org/macosx/hpijs/ and download hpijs-foomatic-2.0.2.ppc.dmg and espgs-7.07.1.ppc.dmg file. Install hpijs first and espgs second.
2) After that Go to Server Preferences, Double click on Print/Fax.
3) Click on the "+" sign, select Line Printer Daemon - LPD
4) In the Address field, enter the IP address of your print server.
5) In the Queue name (This is very important). I used L2 for USB. You can try P1, L1 as well. Not sure how you have connected to the print server. For me L2 worked. I had tried using L1 and P1 and it didn't work for me.
6) The Name field should automatically be populated.
7) In the Print Using, select HP and then select "HP LaserJet 1012 Foomatic/hpijs" as the printer or whatever driver you have for your printer.
8) Click on Add
And now open up text edit or something and you should be able to print.
let me know if there are any questions.Try Repairing permissions (Disk Utility). Then restart, then add again.
What do you mean by the printer doesn't show up - the driver (print using:)?
You can try the generic HP Photosmart P1100 Gimp-Print driver that comes in OS X. -
HP Laserjet 1010 & Wireless printing via Airport USB - Not working in SL
Hi There,
After just upgrading to Snow Leopard on my MacBook I tried printing wirelessly to my HP Printer, but no luck!
Printer: HP Laserjet 1010
Connected via: Airport with USB cable
Snow Leopard recognises the printer and is fine to print when the printer is connected directly to the MacBook via USB cable, but:
When I set up wireless printing, it finds the printer (via Bonjour) but simply will not print. The print monitor gets to 24% or so of the file processed and then just stops & fails.
Everything was fine under 10.5 Leopard. It seems it should work, but no printing occurs! Any ideas?
Many thanks,
PaulI had a similar-sounding problem with my HP1012.
The fix:
a. power-cycled the Airport Extreme.
b. Updated firmware.
c. Select Print in an application.
For an extended discussion of what I did see here - some of this may help:
http://discussions.apple.com/thread.jspa?threadID=2142906&tstart=60
Actually, at this point I have two printers connected: Airport Extreme ->USB powered hub ->2 printers. One is the HP1012, the other is an HP 4300 series inkjet. Took sometime to get it right, the first hub I tried apparently was not powered enough. In that vein, one earlier thread (a response to one of my posts) pointed out the possibility that the AE -> printer USB connection might not be adequately powered, and to try using an intermediate hub. Assuming your AE is performing properly in all other respects, don't rule out a cable or other printer connection issue even if the setup was working properly before.
stan -
Trying to connect wireless printer, asking for password for time capsule?
Trying to connect new wireless printer and it's asking for my password for my time capsule. I don't remember that I had entered one initially, but maybe I did and just forgot. Any way to retrieve a password for time capsule?
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click on Edit in the small window
Click the Base Station menu at the uppermost top of the computer screen up where the Help, File, Window, etc menus appear
Click Show Passwords -
HP Laserjet 1300 wireless printing?
Is my HP Laserjet 1300 capable of wireless printing? Could I purchase something that will convert the serial port. (My USB ports no longer work)
Hi donnabaird,
Unfortunately this printer is only USB capable. It was not built to be wireless. You would need a wireless printer to print wirelessly. I hope this helps.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided. -
HP Laserjet P1102w wireless connection/print issues. Unreliable connection
I have this printer in a business public wifi network with bonjour enabled. I installed this printer wirelessly, but any time I print to it, it takes minutes before the printer will actually receive and print the job.
I have found that power cycling the printer starts the print job faster, however I would like to be able to avoid having to do this every time. I cannot see this printer from other computers, or at the IP address it has registered, either. Only in the small window of printing the job does it actually appear on the wireless network, then it seems to disappear again. If I try pinging the printer I get a response saying it was not found. Unless I ping during a print job in which case it replies with all packets sent/received correctly.
I am using Windows 7 32bit, have installed the latest printer firmware, etc.
The blue WiFi light on the printer is usually off or flickering, but not really ever solid for more than a few seconds.Sounds like the printer is having trouble stabilizing on the network. Try following the steps in this document to stabalize the printer's wireless connection. You can also try updating the firmware to improve the connectivity. Let me know what happens.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
HP LaserJet P1102W - no print output in Linux Mint 17.1 Cinnamon Desktop
I've just done a default install of Linux Mint 17.1 - as feared, no print output.
I'm guessing I need to install a driver - but I couldn't find anything easily on HP site, only Windows/Mac OS stuff. Are HP printers generally linux friendly? Where can I download drivers if they are? More over, I'm a total linux newbie, so any drivers need to be easily installed! I'm not currently familiar with Terminal windows and line commands!
My printer does have wireless enabled, but I have it connected via direct USB also.
Linux Mint did offer to run a diagnostic tool/debugging tool which gave a great deal of what means nothing to me. Debug output is below if it is helpful, but hoping a simple driver install will cure all ...
Debug Output:
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Is local server publishing?):
{'local_server_exporting_printers': False}
Page 3 (Choose printer):
{'cups_dest': <cups.Dest HP-LaserJet-Professional-P-1102w (default)>,
'cups_instance': None,
'cups_queue': u'HP-LaserJet-Professional-P-1102w',
'cups_queue_listed': True}
Page 4 (Check printer sanity):
{'cups_device_uri_scheme': u'hp',
'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'printer-info': u'Hewlett-Packard HP LaserJet Professional P 1102w',
'printer-is-shared': True,
'printer-location': u'Leela',
'printer-make-and-model': u'HP LaserJet Professional P 1102w, hpcups 3.14.3, requires proprietary plugin',
'printer-state': 3,
'printer-state-message': u'',
'printer-state-reasons': [u'none'],
'printer-type': 167948,
'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-Professional-P-1102w'},
'cups_printer_remote': False,
'hplip_output': (['',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mDevice Information Utility ver. 5.2\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mSystem Tray Status Service ver. 2.0\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mhp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a\x1b[0m',
'\x1b[01mDevice Parameters (dynamic data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' agent1-ack False ',
' agent1-desc Black toner cartridge ',
' agent1-dvc 0 ',
' agent1-health 0 ',
' agent1-health-desc Good/OK ',
' agent1-hp-ink False ',
' agent1-id 0 ',
' agent1-kind 4 ',
' agent1-known False ',
' agent1-level 100 ',
' agent1-level-trigger 0 ',
' agent1-sku 85A ',
' agent1-type 1 ',
' agent1-virgin False ',
' back-end hp ',
" cups-printers ['HP-LaserJet-Professional-P-1102w'] ",
' cups-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' dev-file ',
' device-state 1 ',
' device-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' deviceid MFG:Hewlett-Packard;MDL: LaserJet Professional P ',
' 1102w;CMD:ZJSJS,URF,PCLm,PJL,ACL,HTTCLSLSRINTER;DEHPHP ',
' LaserJet Presessional P 110;F;FWVER:20110826; ',
' duplexer 0 ',
' error-state 0 ',
' host ',
' in-tray1 1 ',
' in-tray2 1 ',
' is-hp True ',
' media-path 1 ',
' panel 0 ',
' panel-line1 ',
' panel-line2 ',
' photo-tray 0 ',
' port 1 ',
' r 0 ',
' revision 254 ',
' rg 000 ',
' rr 000000 ',
' rs 000000000 ',
' serial 000000000W4037X5PR1a ',
' status-code 1000 ',
' status-desc Idle ',
' supply-door 1 ',
' top-door 1 ',
'\x1b[01m',
'Model Parameters (static data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' align-type 0 ',
' clean-type 0 ',
' color-cal-type 0 ',
' copy-type 0 ',
' embedded-server-type 0 ',
' fax-type 0 ',
' fw-download False ',
' icon HP_LaserJet_1012.png ',
' io-mfp-mode 6 ',
' io-mode 1 ',
' io-support 10 ',
' job-storage 0 ',
' linefeed-cal-type 0 ',
' model HP_LaserJet_Professional_P_1102w ',
' model-ui HP LaserJet Professional P 1102w ',
' model1 HP LaserJet Professional P 1102w Printer ',
' monitor-type 0 ',
' panel-check-type 0 ',
' pcard-type 0 ',
' plugin 1 ',
' plugin-reason 1 ',
' power-settings 0 ',
' pq-diag-type 0 ',
' r-type 0 ',
' r0-agent1-kind 4 ',
' r0-agent1-sku 85A ',
' r0-agent1-type 1 ',
' scan-src 0 ',
' scan-type 0 ',
' status-battery-check 0 ',
' status-dynamic-counters 0 ',
' status-type 8 ',
' support-released True ',
' support-subtype 2202411 ',
' support-type 2 ',
' support-ver 3.12.6 ',
" tech-class ['LJZjsMono'] ",
" tech-subclass ['NoAutoDuplex'] ",
' tech-type 3 ',
' usb-pid 4138 ',
' usb-vid 1008 ',
' wifi-config 3 ',
'Done.',
['\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m',
'\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-systray requires Qt4 GUI and DBus support. Exiting.\x1b[0m',
'\x1b[35;01mwarning: Unable to connect to dbus. Is hp-systray running?\x1b[0m',
0),
'is_cups_class': False,
'local_cups_queue_attributes': {'charset-configured': u'utf-8',
'charset-supported': [u'us-ascii', u'utf-8'],
'color-supported': True,
'compression-supported': [u'none', u'gzip'],
'copies-default': 1,
'copies-supported': (1, 9999),
'cups-version': u'1.7.2',
'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'document-format-default': u'application/octet-stream',
'document-format-supported': [u'application/octet-stream',
u'application/pdf',
u'application/postscript',
u'application/vnd.adobe-reader-postscript',
u'application/vnd.cups-pdf',
u'application/vnd.cups-pdf-banner',
u'application/vnd.cups-postscript',
u'application/vnd.cups-raster',
u'application/vnd.cups-raw',
u'application/x-cshell',
u'application/x-csource',
u'application/x-perl',
u'application/x-shell',
u'image/gif',
u'image/jpeg',
u'image/png',
u'image/tiff',
u'image/urf',
u'image/x-bitmap',
u'image/x-photocd',
u'image/x-portable-anymap',
u'image/x-portable-bitmap',
u'image/x-portable-graymap',
u'image/x-portable-pixmap',
u'image/x-sgi-rgb',
u'image/x-sun-raster',
u'image/x-xbitmap',
u'image/x-xpixmap',
u'image/x-xwindowdump',
u'text/css',
u'text/html',
u'text/plain'],
'finishings-default': 3,
'finishings-supported': [3],
'generated-natural-language-supported': [u'en-us'],
'ipp-versions-supported': [u'1.0',
u'1.1',
u'2.0',
u'2.1'],
'ippget-event-life': 15,
'job-creation-attributes-supported': [u'copies',
u'finishings',
u'ipp-attribute-fidelity',
u'job-hold-until',
u'job-name',
u'job-priority',
u'job-sheets',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-hold-until-default': u'no-hold',
'job-hold-until-supported': [u'no-hold',
u'indefinite',
u'day-time',
u'evening',
u'night',
u'second-shift',
u'third-shift',
u'weekend'],
'job-ids-supported': True,
'job-k-limit': 0,
'job-k-octets-supported': (0, 476568600),
'job-page-limit': 0,
'job-priority-default': 50,
'job-priority-supported': [100],
'job-quota-period': 0,
'job-settable-attributes-supported': [u'copies',
u'finishings',
u'job-hold-until',
u'job-name',
u'job-priority',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-sheets-default': (u'none', u'none'),
'job-sheets-supported': [u'none',
u'classified',
u'confidential',
u'form',
u'secret',
u'standard',
u'topsecret',
u'unclassified'],
'jpeg-k-octets-supported': (0, 476568600),
'jpeg-x-dimension-supported': (0, 65535),
'jpeg-y-dimension-supported': (1, 65535),
'marker-change-time': 0,
'media-bottom-margin-supported': [423, 547],
'media-col-default': u'(unknown IPP value tag 0x34)',
'media-col-supported': [u'media-bottom-margin',
u'media-left-margin',
u'media-right-margin',
u'media-size',
u'media-source',
u'media-top-margin',
u'media-type'],
'media-default': u'iso_a4_210x297mm',
'media-left-margin-supported': [423, 635],
'media-right-margin-supported': [423, 635],
'media-size-supported': [u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)'],
'media-source-supported': [u'auto',
u'manual'],
'media-supported': [u'iso_a6_105x148mm',
u'iso_a5_148x210mm',
u'jpn_hagaki_100x148mm',
u'om_double-postcard_148.17x200.03mm',
u'om_jb5_182.12x257.05mm',
u'na_executive_7.25x10.5in',
u'om_16k195x270_195.09x269.88mm',
u'om_16k184x260_184.15x260mm',
u'oe_16k197x273_7.75x10.75in',
u'na_letter_8.5x11in',
u'iso_a4_210x297mm',
u'oe_flsa_8.5x13in',
u'na_legal_8.5x14in',
u'na_monarch_3.875x7.5in',
u'iso_dl_110x220mm',
u'na_number-10_4.125x9.5in',
u'iso_c5_162x229mm',
u'om_env-b5_176.04x250.12mm',
u'custom_min_3x5in',
u'custom_max_17x36in'],
'media-top-margin-supported': [423, 547],
'media-type-supported': [u'stationery'],
'multiple-document-handling-supported': [u'separate-documents-uncollated-copies',
u'separate-documents-collated-copies'],
'multiple-document-jobs-supported': True,
'multiple-operation-time-out': 300,
'natural-language-configured': u'en-us',
'notify-attributes-supported': [u'printer-state-change-time',
u'notify-lease-expiration-time',
u'notify-subscriber-user-name'],
'notify-events-default': [u'job-completed'],
'notify-events-supported': [u'job-completed',
u'job-config-changed',
u'job-created',
u'job-progress',
u'job-state-changed',
u'job-stopped',
u'printer-added',
u'printer-changed',
u'printer-config-changed',
u'printer-deleted',
u'printer-finishings-changed',
u'printer-media-changed',
u'printer-modified',
u'printer-restarted',
u'printer-shutdown',
u'printer-state-changed',
u'printer-stopped',
u'server-audit',
u'server-restarted',
u'server-started',
u'server-stopped'],
'notify-lease-duration-default': 86400,
'notify-lease-duration-supported': (0,
2147483647),
'notify-max-events-supported': [100],
'notify-pull-method-supported': [u'ippget'],
'notify-schemes-supported': [u'dbus',
u'mailto',
u'rss'],
'number-up-default': 1,
'number-up-supported': [1, 2, 4, 6, 9, 16],
'operations-supported': [2,
4,
5,
6,
8,
9,
10,
11,
12,
13,
14,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
34,
35,
37,
38,
56,
57,
59,
16385,
16386,
16387,
16388,
16389,
16390,
16391,
16392,
16393,
16394,
16395,
16396,
16397,
16398,
16399,
16423,
14],
'orientation-requested-default': None,
'orientation-requested-supported': [3,
4,
5,
6],
'output-bin-default': u'face-down',
'output-bin-supported': [u'face-down'],
'page-ranges-supported': True,
'pages-per-minute': 1,
'pages-per-minute-color': 1,
'pdf-k-octets-supported': (0, 476568600),
'pdf-versions-supported': [u'adobe-1.2',
u'adobe-1.3',
u'adobe-1.4',
u'adobe-1.5',
u'adobe-1.6',
u'adobe-1.7',
u'iso-19005-1_2005',
u'iso-32000-1_2008',
u'pwg-5102.3'],
'pdl-override-supported': [u'attempted'],
'port-monitor': u'none',
'port-monitor-supported': [u'none'],
'ppd-timestamp': u'*',
'print-color-mode-default': u'color',
'print-color-mode-supported': [u'monochrome',
u'color'],
'print-quality-default': 4,
'print-quality-supported': [3, 4],
'printer-commands': u'none',
'printer-current-time': u'(IPP_TAG_DATE)',
'printer-dns-sd-name': u'Hewlett-Packard HP LaserJet Professional P 1102w @ Leela',
'printer-error-policy': u'retry-job',
Hi @durandal,
I read your post and see that you need the drivers for the P1102w printer. I can provide the website for you.
Here is the link for the HP Linux Imaging and Printing website. HP Linux imaging and printing.
Here is the link for the P1102w drivers. HP LaserJet Professional p1102w Printer.
If you need more information, please post your questions at the Linux Distribution Forums.
If you appreciate my efforts, please click the Thumbs up button below.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Laserjet CM1415fnw - wireless printing extremely slow
Hello,
I've got my new CM1415fnw, set up wireless following instructions and installed OSX drivers on my Macbook. Printer is visible and manageable via HP utility, test page is printing extremely fast.
The problem is, everything EXCEPT a test page is printing HIDEOUSLY slow - like 5 to 7 minutes after you sent anything to print, the printer finaly starts printing it... And if you're printing a multi-page document, it actually takes 5 to seven minutes for EVERY page to start printing!
Obviously, something must be very wrong with this shiny new printer printing at cool speed of 8-10 pages PER HOUR, where my old Photosmart C7100 was happily printing about the same number of pages per minute? All wireless setting are the same in both cases, and as I already mentioned printer is visible and accessible, and test page prints blazingly fast. It's just that except for test page printing this device is pretty much useless at the moment...
Are there any hints or something I should check to identify the problem? As I'm mentioned, I'm under OSX, so Windows-based HP diagnostic tools are not much help...Hello I just bought this printer a few days ago and set it up and have noticed the same problems with extremely slow network printing through the wireless. I have a 70 meg down fast internet connection & a Belkin 450n db wireless router. When I print photos it takes almost a half an hour for the photos to come through the network and print, which seems very strange for an office LaserJet to be considered normal output. I've also look into purchasing an auto duplex accessory and extra RAM but have sadly found out that neither are an option for this model. First off I have to say shame on you HP for not offering loyal customers the option for auto duplexing and RAM upgrading. Second the print speeds on this thing are absolutely atrocious! Third, your outsourcing of customer support or tech support overseas absolutely sucks. I called up tech support and was transferred immediately to the Philippines. The wrong department received my call and then transferred me to India. I spoke with somebody who had a terrible accent and the call quality was bad on top of that so half an hour went by and he really couldn't help me with my slow network printing issues. On top of that I asked him if although duplexing an extra RAM were accessories I could purchase for this model and he couldn't figure that out he didn't have an answer. So now that I finished ranting , can anybody help me with this or is this the way this thing was made to be, slow as can be?
-
Photosmart wireless printer loss WPA password after turn off
sorry for language, I don't speak a good english
I have a big trouble with my new PHOTOSMART B110a
The printer connecting easily with my router wifi but when I switch off it lost the parameter
every time ai switch on the printer I have to set the wireless setup, selec the ssid and retype the WPA password
is it normal or not?
tanksNot normal. For right now don't turn your printer off (it goes into an extremely low power mode after a few minutes, anyway). There should be an update that will address this issue soon.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Maybe you are looking for
-
ISight Bounces Once and Doesn't Open
Let me start off by saying, I bought this computer originally with OS X Tiger, then upgraded to Leopard. Upon finding out that my Java editor no longer worked (Since I'm a student I have to use the recommended software -- Dr. Java), along with may ot
-
Help with WAP 1142n not displaying web browser?
Hi all Sorry I am new with the Cisco WAP. I have my device configured, and it has an IP, subnet, etc. I currently have it connected with serial port to my laptop and used PutTy to get into it, that's no problem. However, despite it having an IP, I ca
-
Is it possible to call a class/servlet from a front-end web page (web page is in HTML form not java form) given that I created my servlet to be executed per class? If there is, can you give me a sample code snippet on how to do this? An example on ho
-
Photo appears "squished" when rotated in Organizer
I have an Olympus Styles camera, and am using the Macro mode in this camera. The original picture is landscape. When I open it in the Photoshop Elements 3.0 Organizer and rotate the photo so that it is portrait, the photo appears to be "squished" --
-
How to install 64bit Windows 7?
Related to my other thread but a separate question (if I could delete the other thread now I would). My question is: How can I install Windows 7 64bit on my new 27"iMac with pre-installed snow leopard 10.6.2? What I have tried so far: Tried to instal