HP Photosmart 335 printer.

Why do I get card error message when using SD card from Canon Powershot camera, when no problem with card from Nikon Coolpix
Different card manufacturers or card reformat makes no difference.
BJK

bjk3677 wrote: Why do I get card error message when using SD card from Canon Powershot camera, when no problem with card from Nikon Coolpix Different card manufacturers or card reformat makes no difference. BJK
Hello bjk3677, While there is a possibility that you may have a hardware fault, I would suggest downloading and intalling the software/drivers for your printer just to rule out that the issue may be caused by a software issue.
The drivers can be found Here . Since you didn't mention the version of your operating system, you can select the version you require from the list available.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Similar Messages

HP Photosmart 335 print distortion on using Image Zone Express

Using HP Image Zone Express (the packaged software):
When I select a photo to print in the VIEW area I see a correctly proportioned picture.
When I press the PRINT tab the photo appears on the PRINT screen but it does not (and noticeably so) have the same print proportions as on the previous screen. The picture's length (height) increases in proportion to its width by an amount that makes a face in the picture appear thinner than it really is, .
This would not normally be a problem except that when I print the picture, the resulting print also shows these wrong proportions!
When I use Photoshop to print via this printer, the proportions are correct but the print quality is inferior.
Among the actions I have performed to try and solve this problem are:
I have checked and found that my printer drivers are up-to-date.
I have tried putting all settings back to their defaults.
I have restarted the printer, the software and the computer (I have not re-installed anything).
I have tried printing smaller images than the paper size (10x15cm) with the same result. Strangely, when I do this, the printer tells me that the image is larger than the paper and some cropping will occur!
An additional defect that possibly has nothing to do with the "proportions" problem is: The print "centering" (on the page) function does not seem to work at all.
Any ideas or help with this proportions problem would be greatly appreciated.

Hi Mel, yea if you've tried all the usual troubleshooting then it could be worth checking you have the latest SW & driver
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3396080&cc=ie&dlc=en&lc=en&product=33960...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Is there any way to print a photo from my iphone on plain paper on my photosmart plus printer?

Whenever I try to use Airprint to print a photo from my iPhone to my Photosmart Plus printer, it tries to print it on photo paper from the photo paper tray.
I want it to print on the plain paper in the regular tray.
I read online where this is possible with the iPrint app - but when I went to the App Store, there is no iPrint App. I found a sticky post here saying that it has been removed from the App Store in anticipation of a new ePrint Home & Business version that won't be available everywhere until September.
So, in the meantime, is there anyway to change the location of where the photos from the iPhone print?
Thanks in advance for any assistance.

HI
Most likely their is not, as printing pictures is standard set to photopaper as you most likely need good quality. Pictures on normal paper are not considered good quaity and thus not set as standard.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

AIO app on iPAD not finding my HP Photosmart C4750 printer

The AIO app on my iPad can't find my HP Photosmart C4750 printer. However, the HP eprint app on my same iPad does find the printer. Printer is turned on, connected to the network. My HP laptop and my HP eprint app on my iPad both find the printer. Only my AIO app on my iPad is blind to the printer.

Hello world-peace,
Welcome to the HP Support Forums!
I was able to find out why the C4750 will not listed in the All-in-One Remote app, but is in the ePrint app. The printer just isn't supported in the app.
You will have to keep using the ePrint app for any printing done with the iPad and C4750.
Wish I better news, or a workaround for you.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

[Solved] Hp-setup cannot find my HP Photosmart Plus printer

Hi all,
I'm trying to set up my HP Photosmart Plus printer. I have an Arch desktop acting as the CUPS server, which I ssh into from my laptop. I've gone through the CUPS installation and linux - linux sharing instructions. When I try to set up the printer through the CUPS web interface, it easily detects and adds my printer. I can access it from my laptop and print stuff fine. However, it will only print out:
**** Unable to open the initial device, quitting.
I discovered that the printer should instead be set up using hp-setup. Running hp-check -t gives this.
Running hp-check --fix prompts to reinstall the printer through hp-setup, and so it removes the printer from CUPS and starts hp-setup -i.
When I select "net" for the connection type (my printer is wireless), it can't find my printer, even though the standard CUPS interface had no problem with this.
[?1034h
[01mHP Linux Imaging and Printing System (ver. 3.12.11)[0m
[01mPrinter/Fax Setup Utility ver. 9.0[0m
Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
| SELECT CONNECTION (I/O) TYPE |
Num Connection Description
Type
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
2 par Parallel Port (LPT:)
[01m
Enter number 0...2 for connection type (q=quit, enter=usb*) ? [0m
Using connection type: net
error: No device selected/specified or that supports this functionality.
Here's a list of all the packages on the system, in case you're doubting that I forgot to install a particular dependency.
If you need any more info, just tell me.
Thanks!
Last edited by Mindstormscreator (2012-12-18 21:55:23)

So I tried connecting it through USB instead, and now I get these messages:
Using queue name: Photosmart_Plus_B210
Locating PPD file... Please wait.
warning: No PPD found for model photosmart_plus_b210 using new algorithm. Trying old algorithm...
Found PPD file: drv:///hp/hpcups.drv/hp-photosmart_plus_b210_series.ppd
Enter a location description for this printer (q=quit) ?pool-room
Enter additonal information or notes for this printer (q=quit) ?
Adding print queue to CUPS:
Device URI: hp:/usb/Photosmart_Plus_B210_series?serial=CN15V3250N05J9
Queue name: Photosmart_Plus_B210
PPD file: drv:///hp/hpcups.drv/hp-photosmart_plus_b210_series.ppd
Location: pool-room
Information:
error: Printer queue setup failed. Please restart CUPS and try again.
I've gone on a hunt for this ppd file before with no success. Does anyone know an absolute location to obtain it?

My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite. Any suggestions?

My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite. Any suggestions?

Hey clutterfromduluth,
Thanks for the question. I understand that you are experiencing issues with your printer/scanner after updating to OS X Yosemite. To troubleshoot this issue check out the following:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

HP Photosmart C6180 printer. Says the magenta ink cartridge is empty when it is new.

I own a HP Photosmart C6180 printer. It sat for several months so I replaced all of the ink cartridges. It will not print because it says the magenta ink cartridge is empty. It is brand new and i can see the ink inside of it. I am not sure what to do. I don't want to take it to get serviced as I live several hours from any computer or printer repair shop. Please help!

Hi pbeck39
What are the ink levels like on a self test page - are they good? Are you using Win XP x64 by any chance?
Thanks
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

I am trying to locate an HP Photosmart 7960 printer install disk. Any ideas how to get?

Two questions....
I have an HP Photosmart 7960 printer and we have a new computer. We cannot find the install disk. I called HP and after about 2 hours of "help" was told that they can't support the printer anymore - it's too old. None of the on-line downloads from HP worked.
I have TONS of ink for this printer...
The ink cartridges are 56, 57, 58, and 59. If I cannot locate an install disk it may be worth my purchasing a printer that uses these cartridges. How would I find out what printers are available that use these cartridges?
This question was solved.
View Solution.

So the basic drivers listed under the link below didnt work?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=305383&lc=en&cc=us&dlc=en&lang=en&cc=us&...
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

HP Photosmart c309a printer. install msg is 'wireless radio is not functioning'. troubleshoot?

My HP Photosmart C309a printer stopped printing. i uninstalled & re-installed the printer and software. on the reinstall, a message popped up that "wireless radio is not functioning'" how do i troubleshoot this?

This is how to contact HP support: www.hp.com/go/totalcare (click on Printers & Monitors, there is a phone number on the resulting page).
Do it soon.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart D6160 printer with Windows 7 os

I have an 18 month old HP Photosmart D6160 printer that has performed excellently on my PC running Windows 2000 Professional. The printer using the installed CD software was able to provide test prints, maintenance information and most importantly show which of the six ink cartridges was empty when the printer cartridge indicator light showed a problem. I have recently bought a Packard Bell TJ65 laptop using the Windows 7 os but HP do not provide any updated drivers for this os. The Windows 7 os recognises the printer and has a basic driver which does allow me to print but in order to ascertain which of the six cartridges has a problem (low ink level or empty) I have to remove and replace each cartridge in turn in order to find out which one needs to be replaced. None of the other printer maintenance is available either. I would appreciate any advice on whether there is a workaround for this problem. Thank you in anticipation! Ken

I have exactly the same problem, I have tried on HP's website, they seem to have some software for windows 7 now, but have tried to download the patch but as the original software would not install with windows 7 OS the patch wont work, it would not be so bad if the printer was really ancient, but it is not, the company do not seem to be very supportive, I have loads of ink for it but can never tell which cartridge has run out until it stops printing that colour. What a shame there does not seem to be an answer.

Can't scan to PDF file on HP Photosmart 7520 printer

I have two HP Photosmart 7520 printers - one in my home and one at summer home. On one when I scan I get the option of document or photo and PDF or jpeg. On the other printer, I am not given any options and it automatically scans into a jpeg file. How can I get the PDF format option to work on printer number 2?

Hi @healthdesigner,
Welcome to the HP Forums!
I understand that you cannot scan to PDF on your HP Photosmart 7520 printer. I am happy to help you with your scanning!
For further assistance, I will need some additional information:
If the printer is connected, Wireless, Ethernet, or USB.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If the printer is able to make copies.
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Windows 7 driver for photosmart premium printer

I have installed windows 7 on my hdx 16 and I need drivers for the photosmart premium printer 309c. Anyone have any luck getting the two to work together?
Thanks
Russ
This question was solved.
View Solution.

The latest Vista drivers for this printer on THIS page shows one of the enhancements as supporting Windows 7. So it should install fine. Do notice that this is the v.13 software.
EDIT: Just downloaded the version 13 software, and tried installing it. It seemed to go through fine, though I don't have the printer physically here. Check the screenshot.
Message Edited by DexterM on 07/10/2009 10:57 AM
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.
Attachments:
Capture.JPG ‏57 KB

How do I make my HP photosmart D1110 Printer wireless for when I print?

How do I make my HP photosmart D1110 Printer wireless for when I print? I mean I dont want to plug my printer up every time I need to print something. I know i can do this with my printer because my uncle had it hooked up this way before he passed away. Now im trying to hook it up again and I cant figure it out.

KristiGilreath wrote:
I tried following the steps but I didn't havesome of the tabs it was talking about. I just dont understand.
Hi,
Which type of connection you want to use ? Which tabs are you talking about ? I could not find full specs of your printer, how old is it ? Do you use a wireless network at home ? As mentioned above, I don't know your existing hardware therefore you need to check the book and select a suitable connection first.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I make my HP PhotoSmart 3210 printer wireless Network

How do I make my HP PhotoSmart 3210 printer wireless. It has an Ethernet port which works fine but I want to print on my current wireless network. Can you use any wireless router of G or N? What else can I use? I'm looking for the cheapest option. Also, It has bluetooth, can I use any USB bluetooth for that to work.? I would rather use my network but if all else fails bluetooth will have to due
I am currently runnning windows 7 if it matter. But, I don't think it does.

Hi,
Buy a new wireless printer could be much cheaper and no headache. Or you can try something like this:
https://www.google.com.au/search?q=usb+wireless+print+server&hl=en&tbo=u&rlz=1G1GGLQ_ENAU282&source=...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Photosmart D5360 Printer stopped working with MAC once upgrade to SL?

We have a networked (not wireless printer) HP Photosmart D5360 Printer, and it connected to a Windows PC, Under Leopard we were able to print via Network sharing the printer, however since we have updated to Snow Leopard we can no longer see or print to the printer... Even though all the Windows computers (PC's) can see it and print. Nothing has changed on the network, it just simply isn't being seen by SL on our Mac's anymore...
We can see the workgroup and the computer, but it says it can't connect to the computer (a windows PC) anymore for some reason when while using Leopard we had no issues...
Suggestions? Obviously an easy fix would be to get an Airport Express adapter and plug the printer in that way thus making it a wireless printer, however we would like to get it work without spending the $100 for the Airport Express if possible.

NASCAR3D,
I don't know if this will help, but if it doesn't we'll work through the issues.
Step 1: Make sure the printer drivers on your Windows box are up to date. This step is important, since a driver mismatch could be the cause of your problem.
Step 2: Open the Print & Fax System Preference, right click on your printer, and select "Reset printing system..."
Step 3: Click the + button an the bottom of the now empty list, when the add printer window opens up, press the Windows button in the toolbar. Select your printer, and make sure the Print Using is NOT set to Generic PostScript. It should auto select your printer from the list. If not, make sure you pick it manually.
If it still doesn't work let me know and we'll see what we can do.
Just trying to help.
Andrew

HP Photosmart 335 printer.

Similar Messages

Maybe you are looking for