HP Photosmart 6510 series not good for photo paper

This printer will not do any kinded of photo paper will not pick it up and send through the rolls to the print head
always come back with no paper in tray load paper this printer is only good for plain paper thats all...

Hi @enorman994
Thank you for hanging in.
To better assist you, would you please supply some additional information?
How is the Photosmart 6510 printer connected (USB cable, or wireless)?
What type of photo paper are you using (weight, ColorLok, manufacturer)?
Are you using Windows 7 on your computer as indicated on your first post?
Does the same thing occur when you put a minimum of 10 sheets into the paper tray?
Thank you and I look forward to hearing from you soon.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

HP Photosmart 6510 series network printer will not print black after changing cartrage

HP Photosmart 6510 series network printer will not print anything that is black or has black in the picture after changing cartridge, all other colors are working properly after changing. Does not look like any damage to the cartridge or the insert where you plug in the ink. The well where the ink pad and the cartridge meet is damp with black ink. So not sure what is going on

Hello dinger57 and welcome to the HP forums!
I understand since changing the black cartridge the black ink has not been printing. I'm sorry to hear this, but I will definitely do my best to lend a hand
I will suggest that you start with following through this Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages document. If the issue persists after that can you please let me know what country you're in and whether the printer is in or out of warranty? Thanks! Please feel free to private message me the country information.
Hope to hear from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Hp photosmart 6510 will not power up. it worked fine yesterday

hp photosmart 6510 will not power up. it worked fine yesterday

Hi there beeef72,
This article has troubleshooting for your printer not turning on. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Why do I not have access to all the features of my Canon MG5320 printer in all applications which use a printer? The printer has two paper paths. The rear path is used for photo paper and other specialty papers. this is only one "unavailable".

I have an iMac late 2012 with OSX 10.8.
The MG5320 has two paper feed paths; one at the rear for photo paper, brochure paper, and other specialty papers and a tray for regular 8½x11 paper. It also can print on CDs and DVDs and has an automatic duplexer. Canon provides a utility for printing on the CDs and DVDs and also for printing photos and other specialty items. This is available in Mac format also. I installed the most recent drivers and utilities.
I also have a HP IBM Compatible computer on which the above printer as well as an Epson are installed. Every option of each printer is available in every software application that has need for a printer.
The Mac printer dialog varies from one application to another. The only applications that list the option for selecting paper quality which includes photo paper are Office for Mac, Pages, and Numbers. Not likely that I would be using any of these for photo printing. Auto duplexing, however, is not available here or in any other applications.
The print dialog in Aperture, Photoshop Elements for Mac, ACDSee for Mac, or iPhoto provide the choice of numerous sizes of paper but no option for paper quality. Therefore, I attempted to use the print utility supplied by Canon and updated by Apple for printing some photos. The photos are selected in this utility. When the print command was given I was shown a message that the printer was being reset. It then began printing a spreadsheet, which was not even open, from the front tray on regular paper in fast draft quality.
It is essential that the rear feed be available for printing photos. The printer will not accept photo paper from the front tray. The greater proportion of my printing is photos or other specialty items all of which use paper that must be fed from the rear feed.
An acquaintence who considers himself to be somewhat of a Mac expert insists that the printer options that I require are available and all I need to do is look for them. The print dialog should be clear enough that "looking for options" is not a necessity. Even so, I have dilligently searched every variation of the Mac print dialog on my iMac and only the office type applications named above included anything other than the basic printer functions.
I have also searched numerous locations online without finding a solution. I did, however, find that printing and printing problems seem to be common with several versions of the Mac OS and Mac computers in general.
I would appreciate it if someone could provide me with a solution. I have no desire to upgrade my Windows OS to Windows 8 which is perhaps suitable for "smart" phones but not desktop computers. However, because of the printing issue I have temporarily put my iMac aside and reverted to using my PC with Windows Vista.
Help!!

This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.

Having problem w 3rd party software ., there tech advsed me to repair permissions before reinstalling software . However , querrie says repairing permissions is not good for system . whats up ,, help !!!

having problem w 3rd party software ., there tech advsed me to repair permissions before reinstalling software . However , querrie says repairing permissions is not good for system . whats up ,, help !!!

I've fixed the problem - I think.
I forgot I had the program "Little Snitch" installed on my computer. So I went into it and saw that it was blocking most of my connections for all the programs I use on a daily basis. Once I lifted the RULE to those certain programs - BAM - everything came back to life in an instant!

Series not defined for journal entry

Hello Sir
I have defined two series namely "SCPL" and "New1"
                Start No    Last No
SCPL        10001       3000
New1         3001        30000
Now i have made "SCPL" series as default for A/R Invoices and "New1" series as default for rest of the documents like A/R Credit memo,Journal Entry etc...
Now when I try to add an A/R Invoice , it gives me error message "Series not defined for journal entry"..??    But i have defined New1 series as default for Journal Entry

Hi,
In the series defined for journal entry,set document series as default for which default journal entries will be posted automatically.
Ex.For delivey,return,invoice journal entry will be generated automatically,so if you a series like JESYS08 indicating system automated journal entry.This series should be set as default.
If you have further issue let me know.

DTW - Series not deifned for Journal Entry

2007B
Importing AP invoices thru DTW.
using Document Series
The document series assigned for AP Invoice is "APINV" and the same document series is selected for JE also.
The code for APINV is "7"
The field in DTW to define the document series is "Series" and the series code is given (eg : "7")
DTW gives error "series not defined for Journal Entry Application defined or object defined.."
where as when tried to create an AP Invoice manually, it was successful.
what could be the issue?
vijay

I managed to find the issue.
IN the DTW template,
the field, "handwritten' was tYES, which I changed to tNO as we follow document series and numbering series.
nothing is entered in the 'docnum' field.
now I get the error " to generate this document, first define document series'
vijay

I had my MBP near two finger length magnets and someone told me that its not good for computers! Anyone's opinions on this cause my computer seems fine?

I had my MBP near two finger length magnets and someone told me that its not good for computers! Anyone's opinions on this cause my computer seems fine?

Don't worry about it. The MBP has built-in magnets. Does magsafe power connector ring a bell? The motor inside of the hard drive has a magnet.
You would need an extremely powerful magnet to affect a hard drive. I'm sure the electromagnet they use at a scrap yard to pick up a car could do it.
A long time ago I tried to erase some floppy diskettes by placing a magnet directly against the outer cover of the diskette. It had no effect on the recorded data.

Why is the a505 series not compatible for the windows 10 upgrade

Why is the a505 series not compatible for the windows 10 upgrade. It does not show up in the system available for the upgrade.

Nobody said that it wasn't compatible. Microsoft makes that determination. Toshiba, however, has chosen not to write new utilities and drivers for it for Windows 10.

Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx

Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx

I have one of these http://store.apple.com/us/personalize/itunes?product=M9949
but the credit on it is 30 chf....i try to reddem into itunes and after all the steps i recive a message that says"the serial code is not good...." i don t know why say this....

HP Photosmart 6510 series does not print wireless from HP laptop

HP Photosmart 6510 B211a: network diagnostic test result - no problem found.
Can not print wireless from my HP Compaq 6720s. Document just sits in queue.
Driving me mad.....
How do I solve this issue?

What operating system does the computer use?
What brand and model is the router?
Have you tried the steps for your respective operating system in this document? If not, try them as they have the best chance at resolving the issue when followed in order.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Photosmart 6510 black not printing

This morning I was able to print full-colour docs including black. After the first few prints, they became steadily fainter until nothing appeared. I checked the ink levels in the software and they were all marked as spent, so I went out and bought a 4-pack of HP inks. I installed them in the printer as indicated (wrapping off, orange whatnot off), tried test prints. Colours fine, no black. I ran a printhead clean from software, both an initial then a deeper clean. Printouts showed colour but no black. The control software shows all ink cartridges to be full. Printhead health is good. I turned it off and turned it on again. I cleaned the cartridge vent as advised in various threads. All with no effect - black doesn't print, despite a fresh new cartridge and the control software reporting the reservoir as full. If anyone on here has any ideas as to why this is the case then I'm all ears. If not, then I can only assume: a) the cartridge is knackered. As I've taken it out of its wrapping then I'll not be able to take it back to the shop.b) the printer is knackered, in which case it'll have to go to the skip as it's out of warranty. I've looked at the following forum threads: http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Black-not-printing/m-p/2926025http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Photosmart-6515-doesn-t-print-black-ink-after-installing-new/td-p/2637505 and of course Googled. This problem has already cost me 3 hours and counting, so if it takes any longer then it would be cheaper for me to go out and buy a new (non-HP) printer.

Hi , Welcome to the HP Forums! I noticed that your black ink is not printing with your HP Photosmart 6510, and I am happy to help! Please try the steps within this guide, Printer Prints a Blank Page or Does Not Print Black or Color Ink, and if this does not resolve your issue, please watch this video: If neither options work for you, then the printer will need to be serviced/or replaced. Please contact HP, phone support for further assistance. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Best of luck! “Please click the Thumbs up icon below to thank me for responding.”

HP Photosmart 6510 B211a Not Functioning Correctly After Power Outage

Hi Guys,
I'm new to this forum but I'm hoping someone can help me.
I have an all-in-one HP Photosmart 6510 B211a that has been working like a dream since I got it last Winter. We had an unforeseen power outage yesterday however and once the power came back, the printer insists that there is no ink in the system. I fear the worst and think its brain may be somewhat scrambled.
I replaced two of the ink cartridges just last week with genuine HP ones and everything was fine. My ink levels are nearly low on the other two but I have not replaced these yet as there is no need.
Once the power came back, the printer informed me that the magenta ink was 'missing or damaged'. I removed the cartridge, cleaned it with distilled water and dried it. Once replaced, the printer changed its mind and told me all ink cartridges are now 'missing or damaged'. When I opended the printer again, the ink carriage did not automatically move as normal to allow me to change or remove the cartridges.
Furthermore the touchscreen on the printer will not allow me to exit this error message or perform any other function such as head cleaning. I have tried a soft reset and a hard reset but this has proved fruitless.
Is it knackered? Should I toss it and head to the shops again?
Thanks for reading this,
Brendo
This question was solved.
View Solution.

Hi Rich,
I replaced the magenta cartridge yesterday and my printer is working successfully again! Woohoo!
My dad's an electrician so between us we've come to the conclusion that when the power came back on after the outage there was either an electrical spike or insufficient voltage than normal and this damaged the nearest ink chip to the power supply - the magenta cartridge.
All is well again anyhow.
Thanks for your help - I appreciate it

My new hp photosmart printer 7525 will not print to photo paper always prints on regular paper tray

I have the hp photosmart 7525 wireless printer. When I try to print a picture it doesnt use the photo paper, it keeps using the regular paper. I have Windows 8.

Hello trwhite,
Please take a look at this document, which has links with step-by-step instructions on how to print various things from various places (computer, phone, tablet, etc.). This document shows how to print photos saved on your computer, which I suspect is the specific document you are looking for.
Please let me know if this helps answer your question.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Comic Life? Any good for photos?

Found this on my iMac and I wondered if it's any good for making photo montages?
I use an online lab for photos so wondered if the files it creates would be good enough for uploading for poster prints (some up to 30"x20")?
Any users know?

No, Comic Life is only good for making comics, it can't make any montages. As of today I deleted it, seeing as I won't make any comics on it. Also, it can't make poster prints because of the way the printing would turn out (think a lot of colored dots with no real picture).
So in short, deleting it would not harm anything, nor hinder anything. Just save up some space.

HP Photosmart 6510 series not good for photo paper

Similar Messages

Maybe you are looking for