DTW - Series not deifned for Journal Entry

2007B
Importing AP invoices thru DTW.
using Document Series
The document series assigned for AP Invoice is "APINV" and the same document series is selected for JE also.
The code for APINV is "7"
The field in DTW to define the document series is "Series" and the series code is given (eg : "7")
DTW gives error "series not defined for Journal Entry Application defined or object defined.."
where as when tried to create an AP Invoice manually, it was successful.
what could be the issue?
vijay

I managed to find the issue.
IN the DTW template,
the field, "handwritten' was tYES, which I changed to tNO as we follow document series and numbering series.
nothing is entered in the  'docnum' field.
now I get the error " to generate this document, first define document series'
vijay

Similar Messages

  • Series not defined for journal entry

    Hello Sir
    I have defined two series namely "SCPL"  and "New1"
                    Start No    Last No
    SCPL        10001       3000
    New1         3001        30000  
    Now i have made "SCPL" series as default for A/R Invoices and "New1" series as default for rest of the documents like A/R Credit memo,Journal Entry  etc...  
    Now when I try to add an A/R Invoice , it gives me error message "Series not defined for journal entry"..??    But i have defined New1 series as default for Journal Entry

    Hi,
    In the series defined for journal entry,set document series as default for which default journal entries will be posted automatically.
    Ex.For delivey,return,invoice journal entry will be generated automatically,so if you a series like JESYS08 indicating system automated journal entry.This series should be set as default.
    If you have further issue let me know.

  • Creating a file to be used by report ROIUH_LOAD_JEINTF for journal entry

    Hello everyone,
    My doubt is related to the PRA module -
    I have to create a file to be used by program ROiUH_LOAD_JEINTF for journal entry creation. There are other programs also creating a similar file to what I am expected to create.
    When I observe the existing programs, they have not used OPEN DATASET statement, instead directly used the TRANSFER dataset and then CLOSE DATASET.
    What that does is it creates a file on the app server in a different format with only 1 line even if there may be like 10 lines of journal entry. The file mainly contains # which seems like some internal coding by the system.
    When I tried using the OPEN DATASET statement, it wrote all the lines to the app server that were there in my internal table.
    However, when I do not use the OPEN DATASET statement, it creates a file with just one line and maily # instead of the actual data from internal table.
    Can any one explain what difference does it make to the system when we do not use the OPEN DATASET statement.
    You help would be highly appreciated.
    Thanks and Regards,
    Shipra.

    Hello Satish,
    Thank you for your response.
    I think I was not clear enough about my doubt. I do not have any confusion about what OPEN DATASET would do.
    In my case, there is a file being written to the app server without using an OPEN DATASET for OUTPUT statement. The Z program directly calls a TRANSFER statement.
    The file that is created on the app server looks like:
    7042008-11-01                   000200100840 ######RD##################203               #### #####10012888                #####RI01            MC3                                                                               
    This file is used by the program ROIUH_LOAD_JEINTF. There are several lines in the internal table for Journal Entry creation but only 1 line shows in the file. However, when you debug the program ROIUH_LOAD_JEINTF with the above filename, you would see that it takes up all the JE lines that were passed from the previous program (the Z program) which created this file.
    However, when I changed the Z program to have an OPEN DATASET statement, it had all the lines displayed in the file, the file was very readable.
    I just wanted to know how does the system write to app server when no OPEN DATASET statement is written in the program.
    Hope I am clear this time. Thanks again.
    Regards,
    Shipra.

  • Approval Process For Journal Entries

    We are increasingly being asked to configure approval process for Journal Entries, especially from our larger customers. A move in the right direction was the addition of Stock. However no such addition was mode for journals. Has anyone developed such a solution or can Development give some indication as to where or if this requirement is on the consideration list.
    Responses would be appreciated.
    Earl

    No replies to closed.

  • Why is the a505 series not compatible for the windows 10 upgrade

    Why is the a505 series not compatible for the windows 10 upgrade. It does not show up in the system available for the upgrade.

    Nobody said that it wasn't compatible. Microsoft makes that determination.  Toshiba, however, has chosen not to write new utilities and drivers for it for Windows 10.

  • Manual Document Number for Journal Entry

    I tried to upload invoices via DTW. I used manual doc. series for those invoices. SAP automatically creates a journal entry for every invoice but with it's auto numbering series. How can I use manual number for journal created by system? Thank's a lot.

    Hi,
    as far as I know, there is no manual option series like in document e.g. sales order.
    you could create new series and it is intended to manual operation of journal entry. By using this way, we can manage and differentiate the journal entry document numbering. Which one is for document accounting transaction journal and memorial journal (manual journal).
    Rgds,
    (http://tech.groups.yahoo.com/group/SBO_Knowledge_Village/ )

  • How to update Ref fields in JDT1 for Journal Entries update

    Hi Forum,
    I am this situation:
    While Creating Journal Entries using DTW:
    ==================================
    I can create Ref1 and Ref2 data at JE Header level using OJDT DTW template.
    I can not update Ref1 and Ref2 (different from Ref1 and Ref2 data at header level) at line level using JDT1 template. No error in DTW, all successful, however, the Ref1 and Ref2 data at line level is copied from header level.
    While updating using JDT1 DTW Template:
    ===================================
    I thought may be DTW can update since the entries are present. It does not even do that. That is DTW does not update Ref1 and Ref2 data on JDT1 line level even with update DTW. Just to ensure I am using right template etc. I tried to update the due date and it seems to work.
    Note: While entering manual Journal Entires directly on SAP B1, I could put different Ref1 and Ref2 at header and line levels.
    Thanks for you help.

    hi
    u may use the follwing fields to do it
    RecordKey     LineNum     AccountCode     ContraAccount     CostingCode     Credit     Debit     DueDate     LineMemo     ShortName
    RecordKey     LineNum     AccountCode     ContraAccount     CostingCode     Credit     Debit     DueDate     LineMemo     ShortName
    1     0                         3274426     20110430     Basic     520010
    1     1                         1344031     20110430     Hra     520020
    1     2                         229251     20110430     Convey     520030
    1     3                         631301     20110430     Bonus     525020
    1     4                         2128839     20110430     Spl All     520040
    1     5                         44003     20110430     CCA/Outlocation     520050
    Regards
    Manish

  • Stock Posting does not tally with Journal Entry

    Hi Mentors,
    I currently trying to see the cause of a particular issue with the JE being created by Stock Posting.
    After scavenging the forums, I came across SAP Note 1525960.
    Symptom
    On creating Inventory Posting in locked Posting Period, system gives error message 'Period is
    locked for new data [Message 131-107]'. Keep the window open, go to Posting Periods to
    change the Period Status to 'Unlocked', and then click on 'Reconcile' again. Inventory Posting
    is successfully added.
    The Transaction Value in the Inventory Audit Report is correct. However the Debit / Credit
    amounts in the Journal Entry of Inventory Posting are doubled.
    The note was created in 2010, filed under SAP Business One 2007. I tried to replicate it, and it holds true for our system, which is currently 2004B.
    When I tried to explain the SAP note to our accountant, she said that she did not encounter the error message, since she was the one controlling the period.
    So my question is, if there any other factors that could influence the change in the posting of the JE such that the variance being posted in the JE is more than the actual amount(as verified against "Inventory Posting List" and OINM)? 
    Some facts about our Finance department's practices.
    They enter the "Stock Posting" a month later.
    E.G. Stock Posting for Oct2011 Stock Variance
    System Date: Nov 16, 2011
    Stock Posting - Posting Date: Oct 31, 2011
    Thanks in advance!
    Sean

    Hi Sir Gordon,
    I already checked using your suggested query:
    SELECT * from oinm
    WHERE NegInvAdjs != 0
    found in this [thread|Re: Diffe Amount posting in Same document].
    Unfortunately, 2004B does not have the column "NegInvAdjs". The query failed to execute.
    Thank you for the guidance,
    Sean

  • Liabilities Ageing report not acknowledging old journal entries

    Hello,
    I have just upgraded a system from 2007A SP00 PL48 to 8.8 SP00 PL17.  When I ran the Vendor Liabilities report in 8.8 I noticed that one of the business partners has a journal entry and an open invoice.  The journal entry has no value when displayed in the report however when i open the journal up, it is showing a debit for the exact same amount as the invoice, but was created as a result of a foreign exchange gain and has not been reconciled against the invoice.  The ageing report is showing that the invoice is still outstanding and needs to be paid.  However when I run exactly the same report in version 2007, the two amounts are seen to conteract each other and therefore no oustanding amount is shown in the ageing report for this customer.  When I reproduce the scenario in 8.8 with a new invoice and new journal entry, the two transactions are shown to counteract and no outstanding balance is displayed.
    Does anyone know if there is a problem with old journal entries being recognised in the ageing report in version 8.8 or specifically journals created as a result of foreign exchange rate losses/gains?
    Many thanks,
    Kate

    Hi Kate,
    We recently upgraded to 8.8 and in reviewing the aging reports realized some manually reconciled entries had to be redone.
    In particular, it seemed to be for entries where foreign currencies were involved. There is a new field in the Internal Rec window in the top left corner - select it and the entries with only SC value will then appear (i.e. you will see all unreconciled entries) along with other entries.
    HTH,
    Heather

  • Is there a CI for journal entry?

    Looking to see if there is a prebuilt CI for creating journal entries. If not, what would be the best component to create a CI from?

    Thanks, I downloaded an older version of it, but at least now I can see my journal.
    R

  • Approval for Journal Entries

    Hello Experts,
    Is it possible to apply approval templates for a journal entry??If yes how??

    Hi Divya..........
                Its not possible to have approval procedure for JEs
    For that you have to use journal vouchers where in you can save the JEs and get it approve from the authorised person.
    Regards,
    Rahul

  • Add-On connection for Journal Entry - Failed to Connect to SBO Common

    We have a customer (SAPBO 2005A SP01 PL29) with some specific requirements that required an add-on running in the background to monitor the addition of Goods Receipt PO's to the system. When the GRPO is successfully added, the Add-On will (behind the scenes) create an appropriate Journal Entry through the SAP DI. One of the issues that we encountered during the development of this functionality was that when it was tested by users, they weren't authorized to access the Financials module or the Journal Entry screen. What we ended up doing was creating a secondary connection (vCompany) in the DL pulling the information from the encrypted user information from SAP the Add-On used to connect, but utilizing a management level user ID and password. Once that connection has been made, the Journal Entry is added through the DI and that secondary connection is disconnected.
    The problem that we're encountering is this. When the users are logged into SAP Client with an regular user, and the GRPO adds, the secondary connection fails and returns a message of "Failed to Connect to SBO-Common". However, if the user is logged into SAP as an adminitrative level user and the GRPO is added, the secondary connection is successful and the Journal Entry is created. The secondary connection is strictly used for the JE. Here's the code (VS.Net 2005) for the secondary connection:
    vCompany = New SAPbobsCOM.Company
    vCompany.UseTrusted = True
    vCompany.language = SAPbobsCOM.BoSuppLangs.ln_English
    vCompany.CompanyDB = oCompany.CompanyDB
    vCompany.UserName = "XXXXX"
    vCompany.Password = "YYYYY"           
    vCompany.Server = oCompany.Server
    vCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005
    lRetConnect = vCompany.Connect()
    Where "XXXXX" would be the appropriate management level SAP User Name and "YYYYY" would be that users password.
    Has anyone else had this kind of issue where you needed a secondary connection with management level access behind the scenes to accomplish something in SAP and had problems getting it to connect? Any thoughts or ideas would be greatly appreciated.

    Hi Dennis,
    what you can try is to make a untrusted connection
    oCompany.UseTrusted = False
    and set the DBUser and Pwd
    oCompany.DbUserName = "sa"
    oCompany.DbPassword = "insertpwd"
    lg David

  • Query for Journal Entry as Incoming/Outgoing Payment

    Hi all,
    I need a query that returns all journal entries that are incoming/outgoing payments.
    I have not found anything in the journal entries tables that marks it as a payment.
    thanks,
    Lucas.

    Hi Lucas,
    I am afraid 2 queries could be more meaningful. That might be more convenient:
    Incoming:
    SELECT T0.TransId as [Journal Entry#],
    T0.RefDate as [Posting Date],
    T0.BaseRef as [Incoming Payment #],
    Isnull(T1.AcctName,T0.ShortName) as [GL Account Name/Vendor Code],
    T0.Credit
    from JDT1 T0
    Left JOIN OACT T1 ON T1.AcctCode= T0.ShortName
    where T0.TransType=24 AND
    T0.Credit > 0
    Order By T0.RefDate
    Outgoing:
    SELECT T0.TransId as [Journal Entry#],
    T0.RefDate as [Posting Date],
    T0.BaseRef as [Outgoing Payment #],
    Isnull(T1.AcctName,T0.ShortName) as [GL Account Name/Vendor Code],
    T0.debit
    from JDT1 T0
    Left JOIN OACT T1 ON T1.AcctCode= T0.ShortName
    where T0.TransType=46 AND
    T0.debit > 0
    Order By T0.RefDate
    Thanks,
    Gordon

  • What's This Help not working for one entry in each header file

    I have a large RoboHelp project that I have imported into Version 8 from a previous version. Prior to the import into Version 8, all of the What's This Help in the project was working perfectly; now, post-import, I have a problem.
    Firstly, some background information.
    My project contains a large number of individual header (.H) files, one for each dialog within the software. These header files, which have been generated and provided by our developers, contain one entry for each field on the dialog to which the header file relates. The header files are all contained within a \HTML Topics\Fields\ folder (going from the root of my Help project).
    Each header file has a corresponding text (.TXT) file. These text files contain entries that correspond to the entries in the relevant header file. The text files are also contained within the \HTML Topics\Fields\ folder.
    Below is an example of the contents of a header file:
    #define IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST          16811
    #define IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE         16812    
    #define IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE      16813
    Below is the contents of the corresponding text file:
    .topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
    Click this button to add a new row of hierarchical appearance settings to the grid.
    .topic IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST
    Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply to the second level, and so on.
    .topic IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE
    Click this button to delete the selected row of hierarchical appearance settings from the grid.
    The What's This Help that was part of the original project still works perfectly. However, after upgrading the project to RoboHelp Version 8, I have had to update the project to reflect changes to the software. As part of this work, I have imported some new header files and updated some existing ones - and edited the corresponding text files accordingly.
    The What's This Help that is covered by the header files that I have imported since the upgrade to RoboHelp Version 8 does not work correctly; in each case, the What's This Help does not work for whichever field appears at the top of the appropriate text file. The position of the entry in the corresponding header file does not make a difference.
    If I manually edit a text file to move a different entry to the top then recompile the Help project, the What's This Help does not work for the field that now appears at the top of the text file - and the What's This Help for the field that used to appear at the top of the text file now works.
    I've tried everything I can think of to fix this, but nothing has worked. It seems as if there is a problem in the way RoboHelp is compiling the header and text files.
    If I use Microsoft HTML Help Workshop to decompile the CHM file, then view the contents of the resulting, decompiled text files, the affected files appear as follows:
    .topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
    Click this button to add a new row of hierarchical appearance settings to the grid.
    .topic 16811
    Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply
    to the second level, and so on.
    .topic 16813
    Click this button to delete the selected row of hierarchical appearance settings from the grid.
    Note how the entry at the top - which relates to the What's This Help that doesn't work - appears differently to the other entries which do work. The name of the ID appears after ".topic" rather than the appropriate ID number.
    Any help that anyone can provide me with would be very much appreciated.
    Thank you,
    Mark

    Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

  • UDF is not updating in journal Entry rows

    Hi Experts,
    I have created an UDF in journal entry and trying to insert the values in it based on the transactions.
    But the UDF is not getting updated through coding where as same query if i run in the SQL database it is getting executed properly and UDF is getting updated.
    Please help in this regard
    Thank You
    Regards
    Md.nazeer Shaikh

    Hi,
    Please post the code that u are using.
    Vasu Natari.

Maybe you are looking for