HP PSC 1317 All-In-One Problems

I am using a HP PSC 1317 All-In-One printer located on my Windows network, Mshome, connected to my Desktop Computer (PC). Using two Windows-powered laptops with the HP PSC printer being 'Shared' I am successfully able to print out documents over the network, wirelessly.
Today I have spent most of my time trying to get this same result using my PowerBook G4.
I connect to my Network, Mshome, open up a document and select print. My current printer is not listed so I click to add one. I then go through the steps required to add a printer to my PowerBook over the network. This all goes well until is lists it as 'Generic' to which I open up and select HP. I scroll up and down the list umpteen times to find my printer model is not listed so for most of my day I have been trying out official HP drivers for OS X for my model of printer including 3rd party drivers that all don't seem to work.
I bit the bullent and decided to install the printer directly via USB on to my PowerBook. Despite installing unwanted applications on my PowerBook that works and I can print out successfully. Using this same method, I try to add the printer over the network, with it still plugged in to my PowerBook, thinking that I would be able to locate the drivers, but still no luck (or no idea where these drivers will be located). I give up and plug the printer back in to my Desktop PC and then try to add it using the same process before but unable to locate the required drivers and the product model under HP.
I am totally clueless as to what I can do to have my PowerBook print out my work wirelessly using my HP PSC 1317 All-In-One printer using my Windows Network, Mshome.
Usually I am quite quick to fixing these sort of computer/hardware-related problems but this one simply has me stumped. Any help and adive on this would greatly help and end a wasted day.
Regards,
Steve

There was no PSC 1310 model choice in the menu. Deskjet 900 series doesn't work and, yes, at one point I did install Ghostscript. My printer does, however, work on the Windows network using multiple computers and laptops running Windows. Nevertheless, connecting to the network and using the printer using my PowerBook doesn't.
Nevermind. My alternative is that I can send my printable documents to a Windows computer on the network to print out. Nothing I cannot bypass anyway.
Thanks for the help.

Similar Messages

Hp-psc 1317 all-in-one printing problems

I have a hp psc 1317 printer scanner. It is connected to my laptop running Windows Vista. Recently the print quality diminished until now when I print a document it sounds like printing is happening but there is no mark on the paper whatsoever.
Today I downloaded and installed the HP Solution Centre software. My ink levels are pretty full and when I attempt a test document the software doesn't seem to think there is a problem although still nothing is printing on the paper.
I am completely confsued as to what is causing this problem. The only thing I can think might be connected to the problem is that in the printer window of the control panel two printers are showing: hp psc 1310 and hp psc 1310 (copy 1). I'm not sure why the printer has been listed twice but I have chosen each printer in turn and attempted to print a document. When the 'original' printer is selected nothing is printed at all but if I select the 'copy' printer it goes through the process described above.
There is obviously not a problem with ink levels and the printer and computer are communicating but something somewhere is going wrong and I'd love someone's help if at all possible.
Thanks so much
Chris

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Windows 7 and HP psc 1317 All in One printer

A friend has a new laptop with Windows 7 installed. I am trying to install the software for his HP psc 1317 series all in one. I have down loaded the drivers etc from the HP site but despite running it as an administrator, both from the original disc and the download, it hangs up half way through telling me to run it as an administrator which I am. (The run as command no longer exists in Win 7) As the 1317 is an old unit but worked perfectly in XP do we have to throw it away which is a shame? I have gone into setup in the software and clicked to run as administrator but to no avail.
Message Edited by qkjb on 11-19-2009 02:53 AM

I am not sure about the driver you are trying to install...however here is the correct drivers for PSC 1317 with Windows 7 Support:
ftp://ftp.hp.com/pub/softlib/software11/COL30219/al-75052-1/AIO_CDB_NonNet_Full_Win_WW_130_141.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

HP PSC 1317 all-in-one Prints slowly

I have owned my HP 1317 for nearly 5 years & in that time it has performed really well. Lately however its speed of printing has slowed to a snails pace - it can take up to 10 to 15 minutes to print out a simple Word document.
The machine hasnt been dropped, knocked or otherwise abused, its has nearly full ink cartridges and the print quality is fine, with no spurious lines, smudges or other issues.
When a document is sent to print, the carriage will eventually move, sweep back & forward maybe 3 or 4 times & then suddenly stop, wait for up to a minute before moving again and then repeat this cycle until the document is complete.
Do you have any suggstions please as to how we can fix this as its driving me nuts !!
Many Thanks

Most likely one of your print cartrdiges has failed and is incorrectly reporting its temperature. I do not recall if the PSC 1317 can print with one of the cartrdiges removed but if so try the following: remove the color cartrdige and print a simple text page from notepad. If the print is normal speed then the color cartridge is the issue and should be replaced. If the printer still pauses at each swath then reinstall the color cartridge and remove the black cartridge. Print the page from notepad once again. Does the printer now pause during printing? If not then the black cartridge is the issue and should be replaced.
If the printer will not print with one of the cartridges removed (or if one of the cartrdiges is identified by the above procedure as the issue) then try cleaning the cartrdige contacts as shown here. This is for a different cartridge series but the procedure would be the same.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP psc 24110 all-in-one - Problems scanning with OS X v10.5.7

Hi, I have been using my HP psc 2410 photosmart all-in-one printer successfully for the past 10months with my MacBook Pro. I recently upgraded my OSX operating system to v10.5.7. since then my printer has been unable to scan. It will print, copy & fax. Checking the HP website shows the latest version of OS X does not support the scanning function of the psc 2410. Does anyone know how I can fix this problem or do I have to buy another scanner? Alternatively, how do I get back to the previous version of OS X which was supplied with my Computer so that I can get the scan function to work?

Hi aviete,
There is no full feature software and driver but you can download HP Printer Drivers for OS X. This download includes the latest HP printing and scanning software OS X Mavericks, OS X Mountain Lion, OS X Lion and Mac OS X v10.6 Snow Leopard.
With this driver you can still print and scan, you just wont have HP software to scan from. Scanning to the computer from the printer control panel is only available when using HP Scan software, thus it will not work because there is no HP scan software as apart of the Apple Software Update driver.
Instead, you can scan using,
Method one: Scan from the Print & Scan window
Method two: Scan from Apple Preview
Method three: Scan from Apple Image Capture
I hope this helps. If you have any additional questions are have any difficulty using any of these methods, please let me know what method you are trying and what the issue/error is. You may also find the following document helpful; OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP PSC 1317 All-In-One Issue

Hi folks,
I have a rather big issue with my current printer. I have a network set up using an AirPort Extreme (802.11n). The printer itself is almost 3 years old. It's connected to the USB port on my Extreme and appears when I try to set up add a printer it appears under the "Printer Name" list as "Spare Room Printer", which is what I have named the printer.
Upon clicking the printer, it loads the name, the location but then appears with "Print Using: Please select a driver or printer model". Scrolling through the list of installed drivers the driver for the 1317 is not present. Leopard officially supports my model of printer, however, HP states my printer is not supported on a Mac network. Obviously, despite what I do, this printer will not work using an Extreme over a network. It does, however, work when connected to a PC and accessing the printer that way. That method requires the PC to be turned on whenever I wish to use the printer.
It'd be interesting to hear if anyone has on the off-chance managed to get their HP PSC 1300 series printer working when plugged directly in to an Extreme.
What I would like to know, though, is this. I have installed these two apps:
(1) http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-35188-1 &lc=en&cc=uk&dlc=en&product=374584&os=219&lang=en
(2) http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-19842-4 &lc=en&cc=uk&dlc=en&product=374584&os=219&lang=en
Could anyone direct me as to where the files/drivers are located on my hard drive that these two apps have installed? With the printer not working when networked and the printer's driver already on my system, the files/drivers that these two apps have installed are thus useless and I would like to remove them.

Hi,
I have had a HP 1300 series working with the older dome top WiFi for a long time. The power supply took a hit and cost more then a new printer, so I got a 1600 series now. But on the 1300 it should work with any 1300 driver. The one that came with mine on the disk was just 1300 series altho it was a 1315. If it sees it on the WIFI network, you should be able to use it ( considering the driver is present, which you say it is... and it must be if you can use it wired). I did install mine wired, then went to wireless (just the WiFi and printer, no other computer). You could try and turn off the PC, leaving the printer and WIFi on. Then, with WiFi seeing it, go to System Preferences > Printers & Fax and install it all over again. All the files and drivers should be there for the clicking.
I had this with the 1600 too. Installed with the wire, and had to reinstall without it. The 2 files you have may or may not come into play. I downloaded an update from HP web-site, that were older then the ones on the disc...??? The only thing the printer will not do wireless, is scan. There seems to be no fix for that, and that is maybe what HP is telling you about not being supported. The printing is, and thru a WiFi network it is.
Try reinstalling it wireless and pick the closest driver (if not the exact one)(or the series driver). Leave the PC off to get it the way you want it. You may have to change the name for it slightly so it will not copy the non-working set-up (and still not work).
Let us know how it goes...
Enjoy

HP PSC 1510 All in One Feeding Problem

I own a HP PSC 1510 All in One and have had very few problems with it up until now. The computer that it is mainly plugged into runs on Windows XP. Once the printer is turned on it immediately takes in a sheet of paper however only half way then a message appears on the computer screen saying that there is a paper jam. If you press the "Cancel/Resume" button on the printer the paper feeds all of the way through however it immediately takes in another sheet but again only half way. Because of this you cant print at all.
Hope you can help!!!

Hi - Try following the steps in this document. It should help resolve the problem.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

HP PSC 1410 All In One, have driver problems...............................

I have an HP PSC 1410 All in one printer that I cannot print items from my computer on. When I try to print something from my computer my computer tells me that no driver for the printer is detcted but when I open "MY COMPUTER" and click Devices, it shows the printer listed as operational and that it is functioning properly.

I tried installing the driver and couldn't so I called HP and found out the printer is obsolete and no drivers are available........ they don't support that model anymore , So I'm screwed................

How can I fix a check paper error on the HP psc 1210 all in one printer?

Product name/number: HP PSC 1210 all-in-one
OS: Windows 7
Error Msg: Check Paper light flashes
I have verified there are no paper jams, paper is loaded, print cartridges move freely and rollers are clean. Is there a a paper out switch that can fail?

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Paper feed out of sync on HP PSC 1510 All-in-One Printer Scanner

Paper feed out of sync on HP PSC 1510 All-in-One(SN MY59SD224W0498). Goes to flashing orange light. With Vista Home Premium 32-bit, 6.0.6002 Service Pack 2 Build 6002. USB connection to HP Pavilion GU658AA-ABU a6250.uk .
After cleaning ink drip tray including removing & refitting the small panel in the base towards the rear RHS of the printer and also Super Glueing a small wedge of timber to close split shaft bearing for rear print feed rollers - looking from rear with clean out door removed this is at the LHS where the cogs are - paper feed is out of sync. When turned on with paper in feed tray printer draws in paper until about 2" (5cm) of paper protrudes from delivery slot & then stops. Paper jam is indicated by flashing orange light. On pressing Cancel/Resume, paper is expelled & another sheet taken in with the same results. Have turned off & restarted. Have moved cartridge cleaner tray right from front to rear & tested & then brought it right forward again & tested. Have turned off & unplugged power & USB & restarted after more than 30 minutes. Have uninstalled driver & downloaded & installed anew. Downloaded & ran the HP Print Diagnostic Utility. All to no avail. Any suggestions anyone?

Hi there nobster,
This article should cover the blinking light. However, I suspect the printer requires servicing.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp psc 1315 all-in-one printer

I have installed a hp psc 1315 all in one printer on my new Mac OS X version 10.9.5.
While I can print without any problems, I don't have access to scan a document from the printer to my computer.
Can anyone help with this?
Thank you.

Hello @annlf
Welcome to the HP Community!
I hope to help you with the scanning concern you have today.
Unfortunately, you will not be able to scan using HP software with your PSC 1315 (older model), on Mavericks (newer OS X), as there is no Full Feature driver (includes scanning software) available.
However, you do have some other options to scan. See this link for your options. Scroll down when the guide loads and select "How do I scan with the driver from Apple Software Update?"
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Have a wonderful Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP psc 1210 all-in-one printer and Mac OS 10.9 (Mavericks)

I just installed the new OS X (Mavericks) on my mac yesterday, and now my printer, an old but reliable HP psc 1210 all-in-one, will not install. I was previously running OS 10.6 (Snow Leopord) and had no problems with the printer. Is there anything I can do to install my printer on the new OS? My computer doesn't even recognize that there is a printer connected via USB when I try to install it... is there anything I can do?

Hello,
Here is a link to a support document on hp.com on how to install on OS X Mavericks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
Let me know if this was usefull by clicking on the Kudos button.
I work for HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

HP PSC 1410 All in One HANG INDEFINITELY with Remote Downlevel Document

Hi, after a few days of setting up my PSC 1410 All In One Printer, which is hooked up to a Compaq Presario V3000 running on Windows XP SP3 with AMD Turion 64x2 processor; and shared print to a Sony Vaio VGN FW33G, and a Mac Pro running on Snow Leopard OS X 10.6
Just yesterday, my printer was jammed with a "Remote Downlevel Document" which I can't remove after using these methods I've researched:
1. "Right Click and Cancel" x [indefinite] times
2. "Right Click and Refresh" x [indefinite] times
3. "Restart" x [indefinite] times
4. "Restart" with printer hooked on/off to the USB x [indefinite] times + [indefinite] combinations of whichever comes first
5. "Unhook USB and Click Start>Run "net stop spooler" and Rehook USB and Click Start>Run "net start spooler" x [indefinite] times
6. Did virus scan for suspicious virus using Anti Vir
7. And in between, combinations of the above x [indefinite] times
8. Search on the internet which obviously there's no real solution
Please help.
Regards,
Bobby

Am (attempting) to print direct from my MacBook - admittedly I did not install any printer drivers during the Leopard (clean) install and am a bit confused as to whether I'm now using the right one, but from what I can gather from the threads like this now littering this forum it wouldn't have made much of a difference. I had infact presumed my problem was just that - that I hadn't the right driver.
Like I hinted at previous; I can reconnect the HP to my old G4 running Tiger and print with no trouble whatsoever.
Trying to print from Leopard brings up the print dialog, and subsequent utility as it should but then nothing - as if the MacBook's not talking with the HP (though it happily recognises it as being there and what model it is etc.).
I have not yet attempted to print over the network, mainly because I couldn't succeed as is. Or tried to scan as it happens (I hardly ever use the built in scanner as I have a better one and the PSC is my backup - I scan a lot in my job).

HP Psc 1410 all in one series Printing pink

Printer - HP Psc 1410 all in one series
Operating system - Microsoft windows Vista 32 bit
Ive installed the driver and the software but when i print colour the colour is pink. When I print in black and white it prints fine jsut colour is all pink.
Jamie

Please click here for a possible solution to your problem:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&product=441115&docname=c00313147
Let me know if that helps.
Please click on KUDOS if you find my solution helpful.

HP PSC 1317 All-In-One Problems

Similar Messages

Maybe you are looking for