HR assignment for work centers using IR02

Hello everybody,
Need some technical help from all regarding issue mentioned below:
I need to do HR assignments to work centers.
Is there any function module available which does HR assignments to work centers.
There's one which I found : COI2_WORKCENTER_HR_ASSIGNMENT, but I'm not able to understand the parameters we need to pass on to this FM.
Please help me if anybody has used this FM.
Also alternatively if any other FM is available plz. let me know.
Help will be highly appreciated.
Regards,
Kavita

Hi kavita,
plz check the FM "COI2_PERSON_RANKING".it uses the FM "COI2_WORKCENTER_HR_ASSIGNMENT" inside it..check the same.
Regards,
Nagaraj

Similar Messages

Shift patterns for work centers

Hi,
I have question regarding shift patterns for work centers. We are actually utilizing the work centres in a aftermarket setup (service jobs). What we would like to do is to add shift patters to the work centers which look similar to this:
Mo-Su 07:00-19:00, Mo-Su 19:00-07:00 4days on/4 days off/4 days on/4days off. As you see we would like it to be a rolling schedule so the first 4 working days the day shift, then 4 days off, then the next working days the night shift and so on.
Is there a way of simplyfying this setup? The length of the cycle can only be set to a maximum of 7 days meaning I can not create a rolling schedule in a simple way. I do know that I can manually add intervals with say a seven day cycle and defining the working hours and additional create shift for holding predefined working hours and breaks.
I have looked at shift sequences but that doesn't seem to be helpful in this scenario? The sequence seems only to be used as a sequence on a daily basis.
If anyone has solution for this or if you have any thought on how to process I would be very thankful if you shared these.
Thanks in advance
Edited by: Karimi on Aug 12, 2008 1:13 PM

In T.code : SHR0 (zero) Shift Report overview.
Enter Report Type and Usage as workcentre, please do the this customazation then you find workcentres in F4.
http://help.sap.com/erp2005_ehp_03/helpdata/en/45/c9ba093c512e96e10000000a155369/frameset.htm
Please read the information from above link this should help.
Jim

Steps For Goods Receipt For Work Order Using Handling Units

Hello MM gurus,
I'm new to HU Management. Can you please share with me the steps for executing a "Goods Receipt For Work Order" using Handling Units?
I created a HU (1000000026), and then using transaction COWBHUWE I tried using that HU to create a goods receipt, but I keep getting the message below:
Handling unit 1000000026 is not provided for goods receipt
Message no. VHURM046
Do you have to assign/plan HUs to Process Orders first? I think the problem is that I'm not understanding the process or the requirements for a goods receipt for work order using HU.

Hello Manish Kumar,
I've been doing Handling Units testing in our sandbox environment and I've been trying to Pack a Finished Product for a Process Order using
1-Transaction code HU02 to create the Handling Unit
2-Transaction COWBHUE after creating the HU to enter the production order number and the HU number and propose it, but the it doesn't work. When I propose it, nothing happens.
3.-I also tried COWBPACK, but for some reason, when I go into COWBPACK, key in the Process Order, and then press enter, I get the following message:
You do not have authorization to create handling units for plant BP08
Message no. VHUPD500
Do you know how to solve this issue?

I travel for work and use iCloud - I can not use back to my mac because i use a Verizon MiFi wireless that does not have NAT-PMP or UPnP. Does anyone know of a way to get around this problem

I travel for work and use iCloud - I can not use back to my mac because i use a Verizon MiFi wireless that does not have NAT-PMP or UPnP. Does anyone know of a way to get around this problem

All ISP-provided equipment is junk. You could get a decent router and connect it to the Verizon router in bridge mode. It should cost about $ 30.

Cost Centers for Work Centers

Dear All,
In our senario we have defined 30 Work Centers required. here the Activity are only for 2 (labour, Mechaine Hr). In KP26 we have to maintain the Standard Price. How can we build a logic in this. Can we create 30 Cost Centers. Y becoz each end eavery work center have the different price for Labour. for EX;
WC1 - 150 Labour Cost
WC2 - 180 Labour Cost
WC3 - 190 Labour Cost
Like this we have to calculate. I hope it is required to create 30 Cost Center to assaign wot Wrok Centers. Here we are going to KP06. We have a standrd pirce to calculate.
Regards

Dear Raj,
IF the business is interested in capturing using different cost centers means then you can create individual cost center and
assign it to the work center and define the rates in KP26.So only one activity type will be there but different cost center.
The otherway is creating multiple activity types say LABH1,LABH2....and creating different rates for the activity type ans same
cost center combination in KP26.But here the challenge is you have to assign the activity types properly under costing tab
against the formulas.
Check and revert back with your queries.
Regards
Mangalraj.S

Split Individual Capacity for Work Centers

In Capacity Leveling for Individual Capacity (CM27 & CM28), what is the process in setting up individual "persons"?
What I would like to do is take an individual work center and divide it up into several different areas. I would like to treat the individual 'persons' as listed in Individual Capacity as those different areas I would divide my work center up into.
However, I have no current setup for personel available and when I go to assign a 'Person' to a specific quantity for my work center, there is "no persons found for the work center".
Where do I go to setup individual "persons" for my work center, and is this a realistic way to divide my work center up?
If not realistic, what method would you recommend to split up the work centers?
Edited by: Cameron on Sep 21, 2009 3:06 PM

Hi,
The best way to learn all these settings is studying the documentation in the IMG itself.
Still id you need the link or documents to read
"http://help.sap.com/saphelp_47x200/helpdata/en/b1/c03e4a439a11d189410000e829fbbd/frameset.htm"
Read the documentation step by step....
I hope this will help you.
Thanks
Raja

Linearity for work centers.

Hi Fox,
I want to customize a report that can show Linearity of all work centers.
A future measure/metric that we would like to use is measuring Linearity on a daily basis for each work center.It's basically checking our ability to build what we're supposed to build on a daily basis.
For example, if we have 4 assemblies due that day and we only make 3 of them, then our Linearity is 75%. Conversely, if we have 4 assemblies due and we make 5 (built one a day early), then our Linearity is still 75% because get 'penalized' for overproducing.
Will you guys help me to proceed for this.
Thanks
AKG

confirmation tables:
AFFW Goods Movements with Errors from Confirmat
AFFWPRO Log of deleted AFFW entries
AFRC Incorrect cost calculations from confirmat
AFRD Default values for collective confirmation
AFRH Header information for confirmation pool
AFRH_DEL Backup Copy of Header Information for Conf
AFRP0 Table of planned changes for confirmation
AFRP1 Table of planned changes to conf.: Automat
AFRP2 Table of planned changes for confirmation:
AFRP3 Table of planned changes for confirmation:
AFRP4 Table of planned changes to confirmatn: Da
AFRU Order Confirmations
AFRV Confirmation pool
AFRV_DEL Backup Copy for Confirmation Pool
AFWI Subsequently posted goods movements for co
CORUUSR User Settings for Confirmation
TAFWD CORU: Messages that are not interpreted as
TCORD Table for field-dependent check routines
TCORU Parameters for Order Confirmation
TCORUPBTXT Customizing Single Screen Entry Confirmat.
TCORUSSDEF Customizing for Single Screen Entry of a C
TCORV Table with Routines for structureing varia
TCORW Confirmation: Window Control
TPARU Control parallelized confirmation processe
TPRRU Control table for process chain for confir
TPRRUT Text table for process control of confirma
Or simply go to SE11.. click F4.. and click SAp applications. In that expand PP.. oyu will get all the tables for routing and confirmation..
hope this helps..
karthick

Air or Pro for work? Using 8-9 hours everyday

Hi, I need to purchase a laptop for work but torn between a Macbook Air and Macbook Pro.
I'll be using it for 8-9 hours everyday, which is a lot of use. I mostly use it for emails, word processing, Powerpoint/Excel stuff, web browsing, and streaming videos.
I'm thinking the Air sounds good, but I'm just worried that because I'll be using it so much that it might not last as long as the Pro.
Would appreciate any advice!
Thanks.

It is not possible to change anything on the Retina models once they are purchased. Everything but the SSD/Flash storage is soldered onto the logic board (That is the main system board better known as the Motherboard). The SSD/Flash storage module is of a proprietary design and shape and although there are some companies offering replacement units for the older, original, Retina display models I don't know if those same companies will make one for the newer models. Only time will tell. But if you do repplace it for a bigger, more storage capacity, unit that voids the Apple warranty.
I also suggest you factor in the cost of the Applecare extended warranty because to fix any Mac computer once the warranty is over it is very expensive. So much so it is almost better to buy a new system. This is even more so for the Retina models because of all the component soldered to the main system board.

Table name for work centers with production or planned orders

dear gurus,
can you please help me on what table names have the work centers with planned or production order

For production Order
1.AUFNR ---> AFKO ---> AFKO-PLAF
2.AFKO-PLAF --> AFVC -
> for respective VORNR get AFVC-ARBID
3.AFVC-ARBID --> pass as OBJID into ---> CRHD --->ARBPL (Work Center)
For planned orders
1.PLNUM ---> PLAF ---> PLAF-BEDID
2.PLAF-BEDID -
> KBKO ---> PLAF-PLNNR, PLAF-PLNAL
3.PLAF-PLNNR, PLAF-PLNAL -
> PLPO -
> for corresponding VORNR (Operation number) get ARBID pass as OBJID ---> CRHD --> ARBPL (Work Center).
Regards
soundar
Edited by: Soundar on May 29, 2008 9:18 AM

ALE Program for Work Centers

Hi All,
Is there any ALE transfer program available to send Work Centers?
Urgent!!!
Regards,
Sunil.

HI sunil,
Using IDoc WMTRID01, you can send data on transfer requirements from the ... However, you define the work center where the material is to be staged.
see these links
http://help.sap.com/saphelp_sm32/helpdata/en/52/16ad34543311d1891c0000e8322f96/content.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAIS/CABFAIS.pdf
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1202078,00.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/68dbab90-0201-0010-2790-a020dc38bfe1
thanks
karthik
reward me if usefull

Collective export of available capacity for work centers

Experts,
I am looking for a way to collective export the available capacity for multiple work centers for a plant.
Data should be based on periodes and intervals&shifts determind in CR12.
What might be a good way to do that ?
Thanks in advance
Jörg

hi,
this is no Standard report kind avaliable in SAP, but u needto develop the requirement. Its the best way which I feel is achievable.
thanks
svrsap

Looking for working example using javafx.builders.HttpRequestBuilder

Hi,
Is there any working example using javafx.builders.HttpRequestBuilder and javafx.io.http.HttpRequest to communicate with application server?
Thanks in advance.
LD

Hi,
Is there any working example using javafx.builders.HttpRequestBuilder and javafx.io.http.HttpRequest to communicate with application server?
Thanks in advance.
LD

Costing Formula SAP_09 for Work centers

Hi Gurus,
In OP51, we have a PARAMETR (for work centre formula) SAP_09 . It picks values from a Filed "MGVRG" . I am not able to trace where this filed comes from in a Rtae routing or Work centre.
Can somebody please advice me where MGVRG comes from .
Your fast reponse would be apprciated
THNX in ADvance

Assigned to PP thread

Unable to send the email when ownership is assigned for a task using SharePoint

When we give any permission to the user through Group and People in SharePoint then that respective user gets an auto generated email, this is working fine for me.
But my actual problem comes here, I have created a task list in SharePoint when I assign a task to the person then that respective person did not get auto generated email. So please do help me with a right solution.

Hi,
Check below link,Might be help full for you.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/55d29459-9aae-4bd0-8cc6-97424326f49f/send-email-when-ownership-is-assigned?forum=sharepointdevelopmentlegacy
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Tables person assignment to work centers

Hi Folks,
do you know which tables are behind the assignment of logistics work Center to HR work center and personell ID?
Thanks,
Enno

Hi Enno,
Please check Table AFRP0.
1.) You can maintain the Person Responsible for the your machines, if you have dedicated one person for one machine. & you can check the same in table "CRHD-VERAN" (Person Responsible) & "CRHD-ARBPL"(Work Center)
Person Responsible is of 3 characters but in the text of this you can maintain the Personnel number.
2.) you can develop a Z-Report with help of your Abapers (if you are personnel are doing the CO11N transaction i.e. production confirmation)
a) you can input the AFRU-PERNR (Personnel Number) & Picks the AFRU-ARBID (Object ID)
b) Pass AFRU-ARBID (Object ID) in Table "CRHD" & Picks the "CRHD-ARBPL" (Work Center)
c) this way you can link the personnel number with the work center.
Regards,
Krishnendu.

HR assignment for work centers using IR02

Similar Messages

Maybe you are looking for