Linearity for work centers.

Hi Fox,
I want to customize a report that can show Linearity of all work centers.
A future measure/metric that we would like to use is measuring Linearity on a daily basis for each work center.It's basically checking our ability to build what we're supposed to build on a daily basis.
For example, if we have 4 assemblies due that day and we only make 3 of them, then our Linearity is 75%. Conversely, if we have 4 assemblies due and we make 5 (built one a day early), then our Linearity is still 75% because get 'penalized' for overproducing.
Will you guys help me to proceed for this.
Thanks
AKG

confirmation tables:
AFFW Goods Movements with Errors from Confirmat
AFFWPRO Log of deleted AFFW entries
AFRC Incorrect cost calculations from confirmat
AFRD Default values for collective confirmation
AFRH Header information for confirmation pool
AFRH_DEL Backup Copy of Header Information for Conf
AFRP0 Table of planned changes for confirmation
AFRP1 Table of planned changes to conf.: Automat
AFRP2 Table of planned changes for confirmation:
AFRP3 Table of planned changes for confirmation:
AFRP4 Table of planned changes to confirmatn: Da
AFRU Order Confirmations
AFRV Confirmation pool
AFRV_DEL Backup Copy for Confirmation Pool
AFWI Subsequently posted goods movements for co
CORUUSR User Settings for Confirmation
TAFWD CORU: Messages that are not interpreted as
TCORD Table for field-dependent check routines
TCORU Parameters for Order Confirmation
TCORUPBTXT Customizing Single Screen Entry Confirmat.
TCORUSSDEF Customizing for Single Screen Entry of a C
TCORV Table with Routines for structureing varia
TCORW Confirmation: Window Control
TPARU Control parallelized confirmation processe
TPRRU Control table for process chain for confir
TPRRUT Text table for process control of confirma
Or simply go to SE11.. click F4.. and click SAp applications. In that expand PP.. oyu will get all the tables for routing and confirmation..
hope this helps..
karthick

Similar Messages

Shift patterns for work centers

Hi,
I have question regarding shift patterns for work centers. We are actually utilizing the work centres in a aftermarket setup (service jobs). What we would like to do is to add shift patters to the work centers which look similar to this:
Mo-Su 07:00-19:00, Mo-Su 19:00-07:00 4days on/4 days off/4 days on/4days off. As you see we would like it to be a rolling schedule so the first 4 working days the day shift, then 4 days off, then the next working days the night shift and so on.
Is there a way of simplyfying this setup? The length of the cycle can only be set to a maximum of 7 days meaning I can not create a rolling schedule in a simple way. I do know that I can manually add intervals with say a seven day cycle and defining the working hours and additional create shift for holding predefined working hours and breaks.
I have looked at shift sequences but that doesn't seem to be helpful in this scenario? The sequence seems only to be used as a sequence on a daily basis.
If anyone has solution for this or if you have any thought on how to process I would be very thankful if you shared these.
Thanks in advance
Edited by: Karimi on Aug 12, 2008 1:13 PM

In T.code : SHR0 (zero) Shift Report overview.
Enter Report Type and Usage as workcentre, please do the this customazation then you find workcentres in F4.
http://help.sap.com/erp2005_ehp_03/helpdata/en/45/c9ba093c512e96e10000000a155369/frameset.htm
Please read the information from above link this should help.
Jim

Table name for work centers with production or planned orders

dear gurus,
can you please help me on what table names have the work centers with planned or production order

For production Order
1.AUFNR ---> AFKO ---> AFKO-PLAF
2.AFKO-PLAF --> AFVC -
> for respective VORNR get AFVC-ARBID
3.AFVC-ARBID --> pass as OBJID into ---> CRHD --->ARBPL (Work Center)
For planned orders
1.PLNUM ---> PLAF ---> PLAF-BEDID
2.PLAF-BEDID -
> KBKO ---> PLAF-PLNNR, PLAF-PLNAL
3.PLAF-PLNNR, PLAF-PLNAL -
> PLPO -
> for corresponding VORNR (Operation number) get ARBID pass as OBJID ---> CRHD --> ARBPL (Work Center).
Regards
soundar
Edited by: Soundar on May 29, 2008 9:18 AM

Cost Centers for Work Centers

Dear All,
In our senario we have defined 30 Work Centers required. here the Activity are only for 2 (labour, Mechaine Hr). In KP26 we have to maintain the Standard Price. How can we build a logic in this. Can we create 30 Cost Centers. Y becoz each end eavery work center have the different price for Labour. for EX;
WC1 - 150 Labour Cost
WC2 - 180 Labour Cost
WC3 - 190 Labour Cost
Like this we have to calculate. I hope it is required to create 30 Cost Center to assaign wot Wrok Centers. Here we are going to KP06. We have a standrd pirce to calculate.
Regards

Dear Raj,
IF the business is interested in capturing using different cost centers means then you can create individual cost center and
assign it to the work center and define the rates in KP26.So only one activity type will be there but different cost center.
The otherway is creating multiple activity types say LABH1,LABH2....and creating different rates for the activity type ans same
cost center combination in KP26.But here the challenge is you have to assign the activity types properly under costing tab
against the formulas.
Check and revert back with your queries.
Regards
Mangalraj.S

Collective export of available capacity for work centers

Experts,
I am looking for a way to collective export the available capacity for multiple work centers for a plant.
Data should be based on periodes and intervals&shifts determind in CR12.
What might be a good way to do that ?
Thanks in advance
Jörg

hi,
this is no Standard report kind avaliable in SAP, but u needto develop the requirement. Its the best way which I feel is achievable.
thanks
svrsap

Split Individual Capacity for Work Centers

In Capacity Leveling for Individual Capacity (CM27 & CM28), what is the process in setting up individual "persons"?
What I would like to do is take an individual work center and divide it up into several different areas. I would like to treat the individual 'persons' as listed in Individual Capacity as those different areas I would divide my work center up into.
However, I have no current setup for personel available and when I go to assign a 'Person' to a specific quantity for my work center, there is "no persons found for the work center".
Where do I go to setup individual "persons" for my work center, and is this a realistic way to divide my work center up?
If not realistic, what method would you recommend to split up the work centers?
Edited by: Cameron on Sep 21, 2009 3:06 PM

Hi,
The best way to learn all these settings is studying the documentation in the IMG itself.
Still id you need the link or documents to read
"http://help.sap.com/saphelp_47x200/helpdata/en/b1/c03e4a439a11d189410000e829fbbd/frameset.htm"
Read the documentation step by step....
I hope this will help you.
Thanks
Raja

HR assignment for work centers using IR02

Hello everybody,
Need some technical help from all regarding issue mentioned below:
I need to do HR assignments to work centers.
Is there any function module available which does HR assignments to work centers.
There's one which I found : COI2_WORKCENTER_HR_ASSIGNMENT, but I'm not able to understand the parameters we need to pass on to this FM.
Please help me if anybody has used this FM.
Also alternatively if any other FM is available plz. let me know.
Help will be highly appreciated.
Regards,
Kavita

Hi kavita,
plz check the FM "COI2_PERSON_RANKING".it uses the FM "COI2_WORKCENTER_HR_ASSIGNMENT" inside it..check the same.
Regards,
Nagaraj

ALE Program for Work Centers

Hi All,
Is there any ALE transfer program available to send Work Centers?
Urgent!!!
Regards,
Sunil.

HI sunil,
Using IDoc WMTRID01, you can send data on transfer requirements from the ... However, you define the work center where the material is to be staged.
see these links
http://help.sap.com/saphelp_sm32/helpdata/en/52/16ad34543311d1891c0000e8322f96/content.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAIS/CABFAIS.pdf
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1202078,00.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/68dbab90-0201-0010-2790-a020dc38bfe1
thanks
karthik
reward me if usefull

Costing Formula SAP_09 for Work centers

Hi Gurus,
In OP51, we have a PARAMETR (for work centre formula) SAP_09 . It picks values from a Filed "MGVRG" . I am not able to trace where this filed comes from in a Rtae routing or Work centre.
Can somebody please advice me where MGVRG comes from .
Your fast reponse would be apprciated
THNX in ADvance

Assigned to PP thread

ALE/iDoc for Work Center data transfer

Hello, community.
I am working on several interfaces for the PP and PM modules using iDocs/ALE.
One of the requirements is that only created and modified data must be distributed from R/3.
For Work Centers, we are using basic type LOIWCS02 and message type LOIWCS. We are generating iDocs through transaction POIM, which has two transfer modes: Complete (data for all Work Centers etc.) and Change (only new and updated data).
The Change Transfer Mode assumes you have set both Change Pointers and Change Documents for the objects to be transfered. Otherwise, it'll work just like the Complete Transfer Mode.
Our PP consultant told me there is no configuration to generate Change Documents for Work Center data modifications.
Can anybody give me other opinions? I'll resort to Z-table solutions only if I have no other options.

Hi Danilo,
Do you know what the process codes are for
LOIWCS and LOIROU ?
Appreciate your help.
Thanks,
Gopi.

CIF of Work Centers

Hello,
I have the situation that our test R/3 system was refreshed, but the corresponding test APO system wasn't. When running now the integration models again, I am phasing problems for the work centers. Here I am getting the message "Resource XXX already exists (mapping error)".
And yes the resource is existing for sure as the work center was already available in the former R/3 test system and it was already included in an integration model. But nevertheless I need to have an active integration model for work centers otherwise I am no longer able to create PPMs.
I am looking forward to get some tipps how to overcome this issue.
Thanks in advance.

Hi,
As you have mentioned that the APO System was not refreshed, the resource will be still available in the APO system.
Now, when you are transferring the workcenter from R/3 after the refresh, there will be conflict in the capacity id as the resource already exists in APO.
hence, the solution is ,you have to delete all the resources in APO. Make sure that all the dependent orders like planned orders and production/process orders are deleted before you delete the resources.
I am sure, this solves the problem.
best of luck
Ram

Number Range for Work Center

Hello All
Am having a little concern regarding the number range for Work Center, kindly let me know where the number range for Work Center is maintained or from where it is picked up when we are using external no range assignment for Work Centers.
Regards,
J K Tharwani

Thanks Sir for your reply,
Actually the requirement is the client want that Equipment number must be the same as the Work Center Code, and Work Center code which i have decided is something like 0101001 & if i give the external no to the Equipment then the system doesnt take the same number instead it takes 101001 i.e. it ignores the initial "0" in the work center code. Actually I wanted to see the no range from where the work center numbering is being picked up, but later on i came to know that there is no such no range setting for work center instead it has contol from no range for object type. Shall look forward to your valuable inputs & guidance.
Regards,
J K Tharwani

Customization Setting for Work center creation

Dear all,
What is the Customization Setting for Work center creation? How to do it?

Hi,
Here are the few things you can check
OP40 : WC category
OP17 : Formula for WC
Person responsible : Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers >>Define Employees Responsible for Work Centers
apart from above You can explore more in
Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers
Riyaj

Persons for Work Center

Dear PM Experts,
I'm finding it difficult to find the place to enter the persons for work centers.
These persons are used in Order Operations (Go to Operations tab/Select the particular operation/Click Internal button at the button/Person No).
Please provide me with the complete path and guidance.
Cheers
Deepal

Yes Deepal
It is required to maintain the HR data for linkage.I thought you already have Master data in the system.
By the TCODE PA30 u need to maintain the personnel data before it is available for assigment.This is related to HR module
Regards
Jignesh

Restrict creation of inspection lot for certain work centers

Hi
My client needs to restrict the creation of inspection lot at certain work centers although QM is active for all material processed in these work centers.
I am using the function module 'EXIT_SAPLQAAT_002' of QAAT0001 for this purpose. Z04 inspection type ( with Post to insp stock) is maintained for all these material.
A different Z table is there , where material-work center combination is maintained for which no inspection lot is required.
Logic provided so that system searches Material-Work center from production order then compares it with the Material-Work center combination with the maintained Z Table.If both found same then no inspection lot will be generated.
But an error message (Change the inspection stock of material XXXXXX in QM only) appears for all those material while doing confirmation in CO11N . Hence system does not allow to complete confirmation for those material where QM is active.
Please suggest if i am using the correct Exit or any further improvement is required.
Thanks and regards
D Mohanty

Hi
Actually the issue is resolved now.The problem was with coding where we were using Table-AFRU for reading prod order details.But AFRU does not consider fresh orders for which it was replaced with AFKO.
Also the Z table must be maintained as Plant-Material-Work center combination prior to go for any order confirmation.
Thank you all who have gone through the post , hope this will help those who have to map the same scenario at their end.
Regards
D Mohanty

Linearity for work centers.

Similar Messages

Maybe you are looking for