HR Payroll Checks address "To The Order Of " is incorrect

For HR payroll checks if there is info in adrs-pstl2 field the
function ADDRESS_INTO_PRINTFORM generate
the address incorrect.
I traced the logic in the debugger
            The function change the g_delivery_type from u201CSu201D to u201CCu201D
-     then clear the street field
-     then it overwrites the zip code with the contents of adrs-pstl2 .
Please help
Thanks
jzk.

Hi,
You can influence the address returned by ADDRESS_INTO_PRINTFORM. You would need to create and address layout in the customer range (900 to 999) and assign this to the required country in config. Then use the user exit EXIT_SAPLSADR_001 to apply your own formatting.
Regards,
Nick

Similar Messages

Check Print in the order of Vendor names

Hello,
Currently checks are being printed in the order of vendor acc numbers, they want to print them in the order of their names. for e.g is ven acc #1 has name Boy and vendor acc # 2 has name Apple , check number 1 should print Apple or ven #2 followed by ven # 1.
please let me know how this can be done.
Thanks very much in advance.

Hi,
Easiest way is to take help from your ABAPer..
Cheers
Raghu

Error while releasing credit block for the order

Hi all,
I am getting follwing error while releasing credit block for the order in VKM1
Incorrect index structure for table IVBEP1
Text
Incorrect index structure for table IVBEP1
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your SAP R/3 System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error.
But we are not transfering any orders to CRM.The order can be only seen in R/3
Please assist
Regards
Mano

Hi
KIndly check the oss note 505876 in may help you
Regards
Damu

How do I save an email address via the ORDERS05 IDoc?

I am creating sales orders via the ORDERS05 Idoc. I am using the E1EDKA1 structure to add the "WE" Ship-To address to the order. There is no field in E1EDKA1 named SMTP_ADDR. I could put it in the Telebox (TELBX) field, which we're not using, but ultimately would like the email address to show up correctly in the ADR6 table in SAP.

Thank you, that helped me a lot. In my case, we are using the AFS version of SAP 46C. The fm J_4A_IDOC_INPUT_ORDERS that we use is very similar to IDOC_INPUT_ORDERS. Instead of CUSTOMER-FUNCTION '004', I used CUSTOMER-FUNCTION '010'. Since the telebox field in E1EDKA1 may be too short for an email address, I used the 70 char ILNNR field in E1EDKA1. I used FM ADDR_SAVE_INTERN per your suggestion and it worked great! If you'd like to see my code, send me an email: [email protected]

Changing the print order for payroll checks and payroll deposit advices

Hello,
How do you change the print order of payroll checks and deposit advices?
Thanks
RW

Hi there crazytalk,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and what program are we printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Monitor the changes of Ship to address in Sales Order

Hi,
My client has an requirment which they would like to monitor whether the ship-to-address has been modified after the order were save.
e.g.
Sold-to 12345
Ship-to 12356
SAVE the order
After the order are sale and sometime later, the user went in VA02 and update the ship-to-address to 23456
now
sold-to 12345
ship-to 23456
It there anyway we can have a report to check if the ship-to has been changes?
thanks,
Rebella

Hello Rebella,
The best option of monitering the changes incurred fro the Ship-to-Party details of a SALES ORDER are as follows:
If you are interested to pick up the information of changes values of Ship-To-Party from a Sales Order then i think you can use the table VBPA. This table will contain the updated value of Ship-To-Party partner function of a Sales Order.
Second option would be to use a program which actually run when you open a Sales Order in VA03 --> Environment --> Changes. You can develop a t-code which shall call this program.
You can also use the T-code AUT10 for tracking changes for a Sales Order.
Hope these infotmation helps you in resolving your issue and please don't forget to mark your thread as closed.
Regards,
Sarthak

Country list is not showing in the Delivery To Address In B2B Order Screen

Hi Experts,
we implementing the B2B site for ECC 6.0 system, not CRM. I login into the B2B site, I went to Shopping Basket to create an order. I went to shopping Basket screen, I entered products for the order. I plan to change to "Deliver To:" field. So I click on the "Pencil on top of envlop" icon. I got the change of Delivery Address change screen. In this screen "Country" field which is required field. But it has no values in the dropdown list. So I cannot change the Delivery Address. Please let me know how to populate the Countries in this dropdown list. Thank you very much for your help.
With Regards,
Sudheer.

Hi,
First check are you maintaining proper customer address in the back-end with country name.
Also Check your "country group" in ECC backend. I hope you have created country group and assigned country to this Country Group and you have used same in your web shop definition.
Regards.
eCommerce Developer
Edited by: Ecommerce Developer on Aug 28, 2009 6:30 AM

Ordered an iPhone 6 Plus off contract with a credit card that has a different billing address than the account. Does it matter and is the order going to be cancelled if it doesn't process the card correctly?

Just don't want to find out Wednesday that my order was cancelled or delayed because the credit card has a different billing address than the account. If they check the validity of the card at the time you pre-order I don't see it being a problem.

Oh, should mention I ordered right at 3AM (EST) on the 12th and got a Confirmation email with a Deliver by: 9/19/14 but when you try the "Check Status page" it spits out "Expected Ship Date: Not available at this time."

Can Pay To the Order of be different from Vendor Name in Check for Payment

My client has several vendors, where payment goes to an organization with a different name. I have created Pay To addresses with the correct information, but would like to automate the process such that the Outgoing Payment, whether created manually or from Payment Wizard will fill in the Pay to the Order of field on the check with a name other than the Vendor Name.
I can manually go into Checks for Payment and enter a different Pay to the Order of name. I want to know if this can be done automatically.
Thanks

Unless you could find a logic to link those info, I don't see any ways to select Pay To by automated way.
Thanks,
Gordon

Modification of the ship to address in the sales order at item level

SAP ECC6
Sales order. Transaction code VA01/VA02
Creation/modification of the ship to address at item level/Allowed by SAP when sold to ≠ ship to/Impossible when
sold to = ship to
Hello All,
I would like to set up an enhancement on the sales order.
> What we want : we want to have the possibility to modify the ship to party address at item level. Indeed, we sometimes make slight modifications to address, such as adding the words "to the attention of"
> What we don’t want : create a new ship to, to take into account the address modification or manage this modification in an item text
> What SAP allows : At item level (as at header level) SAP allows you to modifiy the ship to address when the sold to ≠ ship to. BUT, SAP forbids the modification of the ship to address when the sold to = ship to
Is there a means on the customizing to authorize these modification address at item level each time the sold to = ship to ?
Many thanx
Best regards
Vincent

sold to party=ship to party
goto item and tab partner
select partner function ship to party, again enter same code and press enter
now see item partner automaticlly selcted.
now double click on ship to party and change addrss etc accordingly.
Hii Vincent,
It is possible to change address of shipt to party at item level and it doest matter if sold to part & ship to party are same or different at header level.
Please see above images.
All you have to do is to select ship to party again in item tab-partners and enter code.
Please check item you are using is activated for business data.
Regards,
Nouman

Search the order based on address through IW39....time out

Hi,
I am trying to run the report IW39 for getting the order list based on Address. I am getting this report in 20-25 min, some time it gives dump also as it passes max limit of 30 min.
Is there any way to improve the performance of IW39.
Thanks in advance,
Regards,
Sanjay

Hi Rob,
Thanks a lot for quick response. As these notes are very old (dated 2000, 2001) and you know we are using now SAP 4.7. Will these notes be still valid ?
Or should I check further.
Regards,
Sanjay

35+ minute runtime for the program PAY004 Payroll Check Register

Hi There,
I hope you are doing fine day.
We need your urgent help.
We are on Peoplesoft HRMS Application Release 8.80 SP1 and PeopleTools 8.44. We use North America payroll for all our employees in North America.
We are experiencing 35+ minute runtime for the program PAY004 Payroll Check Register. This happens when user selects run id which is assigned to all companies, paygroup for the month of June 2008. It looks that the program PAY004 is picking up wrong index PSEPAY_CHECK for the record PAY_CHECK. When we force the program PAY004 via Oracle hint /*+ index(P1 PS0PAY_CHECK) */ then the program runs under 3 minutes.
Questions for you:
1. What is causing the above wrong index to the picked for the record PAY_CHECK in the program PAY004?
2. Where do we specify the default index for a record in Peoplesoft?
3. Is adding the hint the best solution?
Please reply ASAP.
Thanks in advance.
Have a nice day and great week.
Regards.
Ashish Bhatt.
716 858 5223

Thanks a lot.
HASPJava.dll is used by verification License and is invoked less and can't use a lot of native memory.
Our business is communicating between java and COM component. In order to implement it, we used JavaCom to generate java class for COM component.
Memory of COM component is little, but Native Memory is high.
Who used JavaCom and did you meet this problem?
Please give me some suggestions. Thanks a lot.

Ordered 128GB iPhone 6 Plus. Confirmation email recieved 9/19/14 ship date, but site says it's still processing. I'm an authorized user on the account and paid with my personal credit card which has a different billing address that the account. Just ma

Anyone know if they check the validity of payment method when they take the order or just when they ship the phone.

Typically your card is not charged until the order process. It should not matter the billing address on the card vs the shipping address. However, the phone can only be shipped to the billing address on the VZW account.

Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certif

Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certificate ______ cancel ______ continue.... This thing is so annoying when trying to go somewhere i just want the error message to go away.

In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

We need to check whether the order is locked or not?

I need to check whether the order is locked or not?
I tried to use this RFC KAUF_ORDER_READ and passed Order no.
I manually locked the order( using Tcode -IW32) but still Function module is not returning 'X' in FIELDS flg_locked and FLG_ENQUE of the structure E_KAUF.
the FM should return 'X' in these fields.
Please help.
Coudl anybody suggest me how I can check using RFC/ Table fields etc that whether the order is locked or not?

Hi Rohit,
Try this code. Check the flag.
Note : Order number should have left padding of Zero
DATA : order_tab TYPE TABLE OF ord_pre,
       wa        TYPE ord_pre,
       flag      TYPE rc27x-flg_sel.
wa-aufnr = '000004006789'. "Order number should have left padding of Zero
APPEND wa TO order_tab.
CALL FUNCTION 'CO_ZF_ORDER_READ'
EXPORTING
   flg_dialog               = ' '
*   FLG_ENQUEUE              = 'X'
*   OBJECTS_IMP              = ' '
*   EXPLODE_IMP              = ' '
*   FLG_PROT_IMP             = ' '
*   FLG_NO_EXTERNAL          = ' '
*   FLG_NO_BANF              =
*   FLG_CHECK_SIM            =
*   IMPORT_MESSAGE_ID        =
*   CHECK_STATUS_READ        = ' '
*   FLG_NO_GOS               = ' '
*   FLG_CALLED_TO_COPY       = ' '
IMPORTING
   flg_enqueue_ok           = flag
*   FLG_ESCAPE               =
TABLES
*   AUFNR_DEL_EXP            =
    aufnr_tab_imp            = order_tab
EXCEPTIONS
   ORDER_NOT_FOUND          = 1
   RELEASE_NO_CHANGE        = 2
   OTHERS                   = 3
IF sy-subrc = 0.
WRITE flag. "If Flag is X order is not locked
ENDIF.
Regards
Rajvansh
Edited by: Rajvansh Ravi on Nov 27, 2008 12:33 PM

HR Payroll Checks address "To The Order Of " is incorrect

Similar Messages

Maybe you are looking for