HT1476 i-phone3 wont recharge; initially home button wouldn't work. Applied the 'auto-touch button thing' via settings. This worked until I ran out of battery life. Now it won't recharge either via laptop (usually does) or wall switch. Just a blk screen.
i-phone3 wont recharge; initially home button wouldn't work. Applied the 'auto-touch button thing' via settings. This worked until I ran out of battery life. Now it won’t recharge either via laptop (usually does) or wall switch. Just a blk screen.
In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt
Similar Messages
-
This evening my iPad2 ran out of battery and it wont come on again! :(
This evening my iPad ran out of battery so i put it on the charger for a while! I went to turn it on again, the usual black screen came up with the apple on it. it was taking a while to come on, and there was lots of white writing over the screen! Help me Please?
Hi pverner,
Try resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). If it appears, then the iPad is resetting, and the Home screen will display shortly.
Cheers,
GB -
i can't turn on my iphone after I use the Itunes.It's updating new software and then my laptop was ran out of battery life what should I do please help me
I'm having a same problem, taking my phone to genius bar tonight. Is there any virus going on??
-
My iPad mini ran out of battery yesterday and now won't turn on at all. How do I resolve this?
When the battery goes flat it can 15 to 20 minutes of charging to then be able to get a response from it, but if you've charged it for longer than that they it should have picked up some charge. Have you got a different charger or cable that you could try just in case there is a problem with either of those - an iPhone or iPod charger will work with the iPad, but as they are lower power will take longer.
-
my iphone 4s ios 7 died, and when i putted it in charge it wont turn on, just showing the battery charging sign.... what can i possibly do
Hi narutokyuubi,
If your iPhone is unresponsive and is only showing the battery charging icon, you may find the following article helpful:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden -
How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
I have an unlocked 3GS and it is NOT jailbroken. It ran out of battery last night and when i charged it this morning it has got stuck on the apple logo wont do anything else. My computer doesnt pick it up either! Can somebody HELP please!!!
nb. i havent updated it for a while to its running a 3. something software.Connect the iPhone to your computer and launch iTunes, then restart the iPhone by holding down the on/off and the home buttons until you see the Apple logo. If that don't fix you problem take a look at this link, http://support.apple.com/kb/HT1414
-
My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?
Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter
If you are in Hong Kong, go to Digital Trade, 1/F, Sincere Plaza, Argyle Street, and it will cost you 120-150HKD, but before you go check that your power button and home button are working correctly, if not press as hard as you can, hope this will help.
-
My iPhone ran out of battery last night, and now it won't turn on.
The top button doesn't work anyway, but I've tried charging to wake it up using several chargers and via a laptop and plug socket.
The phone's about a year old, and has otherwise been working fine. I've no idea why it would just stop working - no water spilt on it or anything like that.
Can anyone suggest anything?Clean iPhone charging port with toothbrush and small amount of Isopropyl Alcohol. See if better. Try another good USB cable. This iPhone potentially has many problems. Without the top button function it is very difficult to deal with any of the other problems. The iPhone may also have faulty battery, faulty charging port, or worse faulty screen, or even worse faulty logic board. Apple will handle this with perfect Replacement iPhone 4 exactly like yours for $149.
-
I just updated my mom's Iphone 4, and now it won't turn on. When it does, there is a "itunes" icon, with the cord picture, which is asking me to connect to Itunes, I believe. Can't get past this screen to even turn it on. What do I do without having to restore her entire phone, which I have no idea how to do that?
You need to restore using the recovery mode described in http://support.apple.com/kb/HT1212 and may need to do that more than once to succeed.
-
every time i open an app it will close with in a few min and wont open at all if music is running in the backround. what can i do about this?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?
Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.
-
I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.
Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps
-
my phone ran out of battery as it was updating to iOS 6. Now it is having trouble rebooting. The silver apple logo keeps showing up and fading away. And doing it all over again... What should I do PLEASE help!! My phone is NOT jailbroken.
I should mention, it was on low power as I was using it.
Maybe you are looking for
-
My Macbook Pro will not load past grey Apple screen...
Last night my Macbook Pro froze so I closed it and went to bed. Today when I opened it, it was still frozen, so I held down the power button and rebooted it. It got as far as the grey Apple screen with the spinning wheel and will not load any further
-
I create a Production order for a material When we create a Production order for 30 numbers and execute cop2 the transaction code is working fine , Handling units are created , confirmations and goods receipt also happening When we create a productio
-
How to view Account balance in a TITLE ACCOUNT
I want to know how i can view the account balance(sum of all balances in the child or sub accounts) for a title account in sap b1.
-
Reg : Are3 print out issue
Dear experts, After posting are3 document print screen is populating but when we click print preview or print tab , we r unable sea print preview and print, if we click print/preview we r getting the massage are3 document has posted successfully , We
-
Disk images from NFS on 10.4 "may be damaged" on 10.5
Disk images (.dmg files) created with hdiutil on OS 10.4 mount with warnings on OS 10.5. BUT - only if the source directory was on an NFS file system. Specifically: On OS 10.4.11, I can run: cd /path/to/nfs/directory echo "hello world" > hello.txt hd