HT4145 Does this article apply to OS X Lion and Airport Utility 6.0? Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

Does this article apply to OS X Lion and Airport Utility 6.0?
Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

I thought you were trying to Extend the network with an Express as the article mentions you pointed to...
You can't find the Airport Extreme then...
I woudl suggest doing a Factory reset....
http://support.apple.com/kb/HT3728
Then you should be able to set it up just as you did when it was new....
Factory default reset (using reset button)
If the AirPort Base Station or Time Capsule isn't accessible from AirPort Utility, the Factory Default reset can be accomplished by using the reset button.
Unplug the AirPort Base Station or Time Capsule from power.
Press and hold the reset button with a pen or pencil, then plug the AirPort Base Station or Time Capsule back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button. This will factory default reset the AirPort Base Station or Time Capsule.

Similar Messages

Why does wireless on my Time Capsule (2TB, 3rd Gen) drop the wireless network now?

Starting a couple of weeks ago, my Apple Time Capsule (2TB, 3rd Gen) has been dropping the wireless network almost daily. I end up pulling the power cord to restart it. I've had the device for what I think has to be about a year and a half already, and it's been working flawlessly until now. I have it on 802.11N (dual-band), using WPA2, with an average of about 7-8 client devices at any one time throughout our home. The problem doesn't appear to be any one client, since all lose connectivity at the very same time. The Time Capsule LED is still green when it's down, and again restarting it solves the problem. The device is out in a well ventilated area, and doesn't feel like its overheating. Devices using Ethernet to connect are unaffected (other than losing visibility to wireless network elements). It can occurn at any time, day or night, seemingly at random. The Airport Utilty advises that I have the latest firmware version (7.5.2).
Anyone have any idea whats going on? Having similar problems? Fix, workaround, suggestion?

Try setting the wireless to manual and fixed channels.. the auto channel swapping does cause issues.. I would also give different names to 2.4ghz and 5ghz so you know clearly which wireless you are connected to.
But sometimes they do just go bad.. power supply is not robust. They do become unreliable.

HT1492 Nowhere does this article define what verbose mode is so I know if I want it or not.

Nowhere does this article define what verbose mode is so I know if I want it or not. I wanted to make this observation a comment about the article, but I don't see a way to do that. The article needs to be revised.

Thanks, WZZZ and baltwo. Your combined contributions clear it up: Verbose is what I call Terminal mode. (Maybe my term is better, because one needs a Verbose reboot after a Terminal crash ; ^ ) I now know I have had no need to use it on startup.
My point was as a writer: If I want to explain how someone can get into Verbose mode, I first explain what it is and its value. The article leaves me asking exactly what WZZZ says: Why would I want to use Verbose mode—preceded by: What is it? I'm hoping that Apple will see my topic and fix it, but I'm not holding my breath....
Even the osxdaily article only hints at the value of Verbose, but that was enough to provide the clarity the original article lacks. I have the Terminal alias on my dock, but I don't think I've used it more than once in four years. I'm no geek, and when those things happen I just march to the Genius Bar, where THEY boot up in Verbose mode. To me it's a testament to the stability of the evolved OS—or more to the fact that I haven't changed how I use my MBP in years or download strange new third-party apps.
Again, thanks for the help.

HT3842 Those steps don't work. I'm using the lastest version of itunes (11.0.1.12) on Windows. This article was last updated in 2009 and lists itunes 7.7. Anyone have any ideas, or is there a new article that accounts for the changes to itunes?

Those steps don't work. I'm using the lastest version of itunes (11.0.1.12) on Windows. This article was last updated in 2009 and lists itunes 7.7. Anyone have any ideas, or is there a new article that accounts for the changes to itunes?

Try This
http://support.apple.com/kb/PH12359

HT1528 Does this also apply to 10.8 Mountain Lion?

Does this also apply to 10.8 Mountain Lion?

If you are trying to rename the Home folder it may be easier to simply create a new user account with the name you want, make it an admin account. Log into the new account then delete the old one.
Other things:
Changing Your Short User Name (MacMost Now 670) - YouTube
https://discussions.apple.com/docs/DOC-3872

My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever...

My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever... I have tried to reset the network few times, but not working.

Hello Nazer_502,
I would be concerned too if my iPhone was acting this way. It sounds like it is overheating and not holding a charge. I recommend following the steps listed below when experiencing an issue like this:
Battery life seems short
Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
Try turning iPhone off and then on again.
Connect iPhone to iTunes and restore iPhone.
If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT3728 When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I redo the factory reset.

The Time Capsule is not providing a wireless connection.
When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I cancel the Airport Utility app and restart it. I performed the factory reset again, restarted the Airport Utility and received the same error. What are the steps to debug and fix the wireless problem?
My Time Capsule is connected to my FIOS router and to my Mac Mini. I am still able to connect to the Internet from the Mini via ethernet. It seems that the Time Capsule acts as a bridge for the ethernet connections between Internet to FIOS, FIOS to Time Capsule, and Time Capsule to Mac Mini.

Which model TC is this? The A1xxx number from the base please.
Try the setup in full isolation from the network.. so unplug the TC from the network.. and turn off wireless in the mini.. so you have mini--ethernet--lan port TC.. and nothing else.
Do the factory reset.
Now check if TC comes up in airport utility..
If it fails, turn on ipv6 local link.. if you are using 6.3 utility this could be necessary.
Still fails, try loading the v5 utility.. you will need to plug the computer back into the FIOS to get internet. Then depending on OS.. Lion according to your profile.. you can just down the utility.. ML takes more steps.
See below.
Do you have an iphone or ipad.. download the airport utility app and use those for the setup.. that can sometimes work better.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

My computer has been spontaneously restarting itself. This last time I wasn't even at the keyboard, I was across the room. I don't know what to make of it, completely baffled.

My computer has been spontaneously restarting itself. This last time I wasn't even at the keyboard, I was across the room. I don't know what to make of it, completely baffled. I'd love some help on this, and if it could come in layman's terms I'd love it even more.

Hi ...
Try Troubleshooting the MagSafe adapter
If the Mac freezes, it may be a preference setting.
Check System Preferences > Energy Saver
See if Restart automatically if the computer freezes is selected. If it is, deselect that box.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

Sorry i mistakenly made this question. It was alright. No Problem At ALL

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this?

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this? Also, I cannot connect to my Photosmart b209a printer, though a different computer - same Macbook Pro can. I tried redownloading the software, but in the setup I get a "device not reachable" message: "However to continue configuring the device in network, your Mac must have access to the device. So please make sure that your Mac has access to the Network ..." I've checked my network on the system preferences and it's properly connected. I'm on the net as I do this. Tis very frustrating, and any assistance woud be appreciated.

Airport Utility is for administration of genuine Apple Base Stations. If you have a different Brand, Airport Utility can do nothing for you.
I think they're using ethernet.
To connect a Printer via Ethernet, no password is needed.
We already tried the password for the internet and that did not work...
If a password is required to connect to the Internet, then WiFi is likley being used, and that WiFi password is the one needed for the Printer connect wirelessly as well.
What make&model Printer? Is it indeed a Wireless Printer? Most connect via USB, but that would force it to use a specific computer to assist in printing.

Microsoft Office 2011 - Has anyone downloaded this and is it useful? More importantly I cannot find it in the App Store.

Microsoft Office 2011 - Has anyone downloaded this and is it useful? More importantly I cannot find it in the App Store.

Hello,
There are some Microsoft product like Windows Phone 7 Connector on the Mac App Store but for the moment Office is not there.
In an interview last year Microsoft’s Amanda Lefebvre told Mobilized : “It’s something we are looking at”.
http://allthingsd.com/20110127/microsoft-considering-whether-to-bring-office-to- apples-mac-app-store/
If you have applications like iWork or the free OpenOffice (http://www.openoffice.org/) you will be able to read files created by Microsoft Office.

I am a student and want to use indesign, illustrator och photo shop. What subscription do I need? Also, I have two computers, can I have the programs om both of them?

I am a student and want to use indesign, illustrator och photo shop. What subscription do I need?
Also, I have two computers, can I have the programs om both of them?
One of the compusters is at my internship workplace and I will only be here for 3 more months, after that I want to be able to use the programs on my own computer.
Thanks!
Karin

Okey, so there is no licens system which only allows use on one computer at the same time?
Say that I want to keep working on something from work on my home computer, then that's no problem?
Thanks!

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again

Time Capsule can't connect to the internet

Hi,
I've looked around these forums and can't seem to find a solution to my (quite specific) problem. I'll try to be as clear as I can - I'm not bad on computers, but network stuff goes way over my head.
I've just moved to Moscow, bringing my TC with me. When I arrived, the landlord had set up broadband for me, with a Motorola SB5101E Surfboard Cable Modem. I plugged the modem into my Macbook via Ethernet (no TC involved yet) and I got on the internet straight away.
Later, though, I tried to hook the modem up to my TC to get wi-fi. I plugged the Ethernet cable into the WAN port on the back.
Straight away, I had no internet access. I did a hard reset (pen on the small button on the back of the TC) and used Airport Utility to set the TC up again. Before it completed, I got the message:
'Your Apple wireless device does not have a valid IP address'.
I hadn't played around with any of the settings, using it purely to create a new wireless network. It was all set to DHCP, automatic everything.
IP address currently starts with 169.
I've tried powering down both modem and TC, for up to 12 hours at one point. I've also tried reconnecting them in various orders - ie modem first, then TC, and vice versa.
None of this is made any easier by the fact that I have no idea who my ISP is or any of that info as I have no Russian yet and my landlord doesn't speak any English.
So... is there anything anyone can suggest? I'm sorry that I can't give any more info than I have.
Thanks in advance

Welcome to the discussions!
Cable modems need a complete reset whenever the device that is directly connected to them is changed.
Power down the modem and pull the battery if it has one. Wait at least 30 minutes. (It may take your service much longer to reset).
Power down the rest of your system as well. When you are ready, power up the modem and let it run for 10-15 minutes. Then, power up the Time Capsule and let it run for 5-10 minutes and finally your computers.
If your modem has a single ethernet port, then Connection Sharing for your Time Capsule should be set to "Share a single IP address".
If you have a combination modem/router (it will have 3-4 ethernet ports), the correct setting as noted below for Connection Sharing would be "Off (Bridge Mode)"

HT4145 Does this article apply to OS X Lion and Airport Utility 6.0? Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

Similar Messages

Maybe you are looking for