HT4528 IOS6 email forwarding and other issues

Since upgrading my 4S to IOS6, I often lose the bar at the bottom of email messages (i.e. the one that has a flag, filing, trash, forward/reply, and new email). I get it back when I turn the iPhone off and on. It happens every couple of days. I am current on my IOS6 level. I appreciate any advice.

Do you have .Mac set to synchronize mailboxes? I don't know whether this could be part of the problem but if you use .Mac it's worth checking.
Do you keep mail messages on the server? This could be another reason. When you create a new account it might be downloading all old mail. I have my advanced settings to retain mail for only 1 week, then delete it from the server. I keep messages on my computer for preference.
I've just checked in Mail Help and for IMAP accounts the mail is kept on the server even though an account is deleted. For POP accounts it can be kept on the server too unless you have specified for it to be removed after a certain time.
Connection Doctor seems to remember all previous accounts that have been used but should indicate that deleted accounts can't be connected. I don't know which file contains this information but it will probably be in the user Library somewhere.
Neville

Similar Messages

SCSM 2012 R2- Workflows not generating email notifications and other issues

hace tres días que no corren mis flujos de trabajo en SCSM 2012, veo el visor de eventos y lo único que conisgo es el siguiente error:
The request to synchronize state for OpsMgr Health Service identified by "f85f05c3-0e7b-d49d-b849-98faad4ad74a" failed due to the following exception "Microsoft.EnterpriseManagement.Common.DataItemDoesNotExistException: An instance was deleted
before its properties could be read.
   at Microsoft.Mom.ConfigService.SvcMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)".
Como puedo hacer para volver a instalar los MP de flujos de trabajo, he borrado cache peor sin éxito.

Iffectatodosworkflowsfrom the dayJuly 18began tofail andno longersendingnotifications, I have reviewedthe
databasewithqueries thatprovideSubscriptionStatus.sql
WorkflowPerformanceTroubleshootingQueriesV2
and I note thatit isthe difference betweenucha Workflow Watemark and Trasaction Log Watermark

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

RV042G Log Email and other issues

The RV042G manual said to use this site for support so here goes. After owning and operating the RV082 for many years, I recently upgraded to the RV042G V01. Overall the RV042G hardware appears to function pretty good. The RV042G has faster throughput, but it is slightly slower in command/control response and boot than the RV082. I have now owned the RV042G about two days and have found a number of issues. Specifically, emailing logs doesn't work.
- Emailing logs does not work. RV042G does not appear to handle any type of connection authentication, it does not have a place for the senders user name or password. I have tried SMTP servers that require no authentication and ones that do, none of them work. RV082 worked fine with the Time Warner Cable (TWC) SMTP server, RV042G does not. Additionally, there is NO output in the logs to show a failure. So TWO bugs here. I have checked settings to ensure no blocking rules, have rebooted, and even did a factory default with no luck and absolutely no mention in the logs anywhere of failure to send.
Email is my primary issue, any suggestions on getting this working would be appreciated. I've also identified a number of other issues as well and included them here to avoid multiple posts. These are:
- Port 0 apparently responds to interrogation and shows CLOSED (not STEALTH per grc.com). This was NOT the case for the RV082 and is a potential security vulnerability as it cannot be redirected.
- Port 1 is CLOSED and apparently responds to interrogation. This was NOT the case for the RV082. Normally I would be good on the RV082. I could redirect any OPEN or CLOSED ports to the bit bucket (192.168.1.254 for instance). BUT, the RV042G Port Forwarding is NOT sending things to the bit bucket and instead decides to OVERRIDE the forwarding and respond to queries. So there are TWO bugs here. This is a potential security vulnerability.
- The ALL Logs tab shows nothing, but sub tabs do until AFTER you hit the clear button, then it works as expected. This happens every time you open the logs. Another poster identified this problem so this is confirmation of that issue. Also, once the dialog box for the log has closed, it will not open again until leaving the page and returning.
- Authentication failures will show up in the System Log but not in the Access Log?
- HTTPS html interface works fine in Firefox. However, turn it off and use just HTTP and there is a problem. Can't see the forms and buttons, can only see the background image. This isn't as much of a problem as I can just use HTTPS, however, with the RV082 when HTTPS was activated it would open the remote management portal regardless of whether the button was clicked or not. So really a non-issue but a bug none the less.
- RV082 could send 500 log events, RV042 can only send 100. Again, not a bug but a reduction in capability over the older RV082.
One last thing, your hardware version control numbers and firmware download page are confusing for the RV042G V01. Found this when I checked if there was a newer version of the firmware than what the RV042G shipped with. Here is what the firmware update page shows:
"Cisco RV042G Dual Gigabit WAN VPN Router"
"Firmware Release 4.2.1.02 - RV042, RV082, RV016 firmware 4.2.1.02-tm (V3 hardware required)".
The problem is that you reset the hardware version in the RV042G (V01). Just seems probable that someone will download the firmware for the RV042 V01 and try to put it on the RV042G V01.
I like the RV042G overall and will wait for updates for these issues (email logs would be nice sooner rather than later as this is an advertised feature). The RV082 was a great router for a long time ONCE most of the bugs were fixed, hoping the RV042G will be the same.

Guess I spoke too soon. If Remote Management = Disable and HTTPS = Enable, it will OPEN external access to port 443. So have to use an access rule to kill it off. Can STEALTH Port 1 as well with an access rule but have to block all traffic there. Cannot block Port 0 (make it STEALTH) with an access rule and this needs to be fixed in firmware.
So port forwarding does work but not when sent to the bit bucket, have to use an Access Rule instead. (You can see this by doing the following: turn off HTTPS and remote management and look at port 443 from the outside of the firewall. No response at all. Now enable HTTPS and keep Remote Management disabled and forward port 443 to an unused internal IP address. The port still shows up as OPEN but won't connect. Again, the RV082 did not exhibit this behavoir and would simply not provide any response to an external query if forwarded to an unused internal IP address.)
For clarity, I have the RV042G V01 with Firmware Version : v4.2.1.02 (Jan 18 2012 14:10:55).

4.4.2 Note 3 Update... Now Email and other Issues

Since I updated to 4.4.2 this morning, the basic email app shuts down every time you tap on a notification. You then have to go to the app itself and reopen it. Since it's the stock app, you can't uninstall it. Not that I'd want to since I took the time to setup 3 different email accounts.
I also been having issues with the split screen not going away when you swipe it down to the bottom of the screen. The only way to close it is by backing out, which causes the first app you had open to close. Which is frustrating. My Note 3 worked just fine before the update. Any suggestions?

Craziness... Now when I use the split screen function, the windows are locked and are NOT adjustable. And to top things off, the email app now fails to send emails!

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

BT Mail is Poor/Unfit for purpose and other issues

Having been migrated to BT Mail I was dismayed at the considerable increase in spam received in my account. Taken a while but I now realise why.............BT Mail has not been adding to my blocked sender list. It says it does, but it does not add the addresses or domains. So I tried doinf it manually, in 'settings' nope no joy there either.
So on to help.............
What a farce. The nice lady listened to what I told her was happening and what I had done...........
then promptly got me to do it all again.........................twice, with the inevitable result. I have been moved to the next level..... wow.
The second part of the rant. They managed to 'lose' one of my email addresses in the migration from BTYahoo. I had what seemed like half of India looking for a solution all through October, November and december. I think they have now given up.
I am paying for this 'service'.
Does anyone have a contact in UK where i can get common sense and knowledge to resolve this issue. India is poor on tech but JUST acceptable if it is a web chat. On the phone, I am sorry, but the language barrier is huge. I am embarrassed having to ask for everything to be repeated as I cant understand.
Suggestions, on a postcard please, as email probably will have issues..................

Just out of interest, I tried to log into BT Yahoo (cos its still available) with my 'missing' supplementary email. Gosh it wanted me to change my password so.......
i tried and it let me and I can now log into Yahoo mail with my 'missing' supplementary email address.
Yet, BT India were unable to; a) find it. b) transfer it/migrate it to BT Mail. c) phoned me twice and told me it would happen over time if they could find it. d) Appear to have given up doing anything since November.
So, now I appear to have a YaHoo mail account with an @btinternet.com address, which I cannot access through BT Mail.
For those of an older persuasion, Arte Johnson would say, 'Very interesting, but stupid!'
Help! Insanity is just around the corner with incandescent rage just in front of him............................
Did I mention that I was paying for this 'service'? Yes, I think I did in an earlier post............
Yes, various people have been contacted, by a number of methods. Carrier pigeon is next, followed by heliograph and semaphore - hand held, as my tower has not yet been completed.......

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

Subtitle buttons - fast-forward and rewinding issue

I am new to DVD Studio Pro 4 and I have project that uses a subtitle button over a video track to provide users with the ability to go "back" to the previous menu - the menu in which they selected the track.
There is a problem using this method however, when fast-forward or rewind is pressed, then the track starts to play again, the back button is now hosed. My thought is that this is because of the chapter markers not being refreshed in the middle of a subtitle, only at the begining and end like bookends.
Is there a way around this? If not, are there any buggy issues with locking down the user controls for fast-forward and rewind? Any help would be much appreciated...
-charlie

You can lock out the User Ops for Fast Forward Rewind or whatever you want. Probably a good idea if you are using the track as a menu effectively.
If however the track is amovie and you want them to go back to the menu where they selected it you can target the menu for any track to go back to a specific menu. Click on the track and check out the Inspector near the bottom where it syas Remote Control. Target the menu you want people to go to back to when they press Menu on their Remote
Steve Kirkham

Email search and send issues ios7

I have noticed two issues in my email app and am wondering if anyone else can explain this:
1) when searching for email my email is not sorted by date.
2) when sending email my default email address is not always used. This happens for frequently emailed contacts. I type the contacts email address and my send from email address changes from the default address to another. (I have multiple email accounts configured on my phone and I'm in the all mail view creating a new message)
This is supremely irritating. Hope someone can explain and suggest a workaround.

Regarding the search it happens to me as well, it's not sorted according the date.
Regarding the send address for the new mail, have you configured your default email account in
Settings>mail, contacts,calendars>default account to your preferred account?

Twist charm swipes not working and other issues

Hi all,
I just got a new Twist a few days ago and am having some issues with it. I got it on line from Staples who have a very limited return policy so I need to get these problems resolved quickly or will have to return it in a few days. I really like it a lot and would hate to return it and deal with the replacement, double charge on my CC until they get the defective Twist and refund the bucks, not to mention the shipping hassles.
I've installed all updates including the Lenovo updates, updated the Bios, did a factory refresh and went through the update process all over again and also calibrated the screen.
So the problems I'm seeing are the swipes from top to close an app, left to view open apps, and right for the charms will intermittently stop working but you can still tap on apps to open them and slide the app screen left \ right.
The other issue is that occasionally the app screen will shrink and expand or open an app without being touched, I would have it on a stand in tablet mode and watch it expand \ contract, and suddenly bring up an app like Remote Desktop. I contacted Lenovo support they said it was a hardware issue and recommended returning it but I'm reluctant to do this and hope there's a solution for it.
I did notice was that moving to portrait mode would usually work to bring back the swipe functionality. Digging into it a bit more, I think I found the root cause, when it is in tablet mode with the keyboard folded back, the keyboard isn’t getting fully disabled, watching it closely I noticed that a cursor would sometimes appear \ disappear momentarily.
Any thoughts or advice would be GREATLY appreciated!!

Chris Ibsen wrote:
I still have access to the folder, as I still have the external drive.
okay, let's make really sure it is the entire iTunes folder. a typical one looks like this on the inside
the red arrow points to the heart of your iTunes library - the iTunes library file, the iTunes database. you will want to treat this file as the apple of your eye !
anyhoo, if indeed the entire iTunes folder is on the external, simply drag it from there to <MacintoshHD>/users/<yourname>/music on the new Mac.
since a folder by the same name is already in that location, the finder will tell you so and ask you if you want to "replace it with the one you're moving". confirm that you want that.
when the copying has finished, fire up iTunes and you should be taken to the exact same library you were used to from your old Mac.
finally, go iTunes > preferences > advanced and check that +iTunes media folder location+ is set correctly - it should point to the iTunes folder on your new Mac's startup disk. if it doesn't, change it accordingly.
please post back with results !
JGG

Itunes email address and iCloud issues

Good afternoon all,
When I initially created an Apple account back in 2004 I signed up for a then .mac email address and now use that same .mac address with all of my iCloud services. Not thinking I created an AppleID to use with iTunes using a personal email address (something similar to [email protected] for example).
The dilemma that I have is that I have to use the [email protected] email address to sign into my iTunes account to purchase anything from the iTunes store and to view all of my past purchases from 2004 to present; yet all of my iCloud services (keychain, photos, etc...) are setup using my .mac email address.
When I log into my [email protected] AppleID (the account that has all of my iTunes purchases) I try to change the email address to my .mac address and it will not allow me bc it says it is an apple owned domain.
Is there any way possible for me to merge these two accounts so that I can have one singular email sign in for all of my iTunes and iCloud services?
Thanks
-Kris

That account expired
Can I keep my MobileMe email address once I move to iCloud?
Only if you have an active MobileMe account when you sign up for iCloud, you can keep your me.com or mac.comemail address and any email aliases you have created and move your MobileMe mail, contacts, and calendars, as well as your bookmarks, to the new service. When you're ready to make the move, go to www.me.com/move.
From here > Information about the MobileMe transition

Users locked after several password errors - Event ID 4625, CHAP and other issues

The event log showing the user´s password error is shown here, partially:
An account failed to log on.
Account For Which Logon Failed:
                Security ID:
NULL SID
                Account Name: <USERNAME>
                Account Domain: <USERDOMAIN>
Failure Information:
                Failure Reason:
Unknown user name or bad password.
                Status:
0xc000006d
                Sub Status:
0xc000006a
Process Information:
                Caller Process ID:0x388
                Caller Process Name:           C:\Windows\System32\svchost.exe
Network Information:
                Workstation Name:
                Source Network Address:   -
                Source Port:
Detailed Authentication Information:
                Logon Process:
CHAP
The "CHAP" puzzles me, but after converting the 0X388, we have the PID 904:
tasklist /FI "PID eq 904" /svc
Image Name                     PID Services
========================= ======== ============================================
svchost.exe                    904 AeLookupSvc, Appinfo, BITS, CertPropSvc,
EapHost, gpsvc, IAS, IKEEXT, iphlpsvc,
LanmanServer, ProfSvc, Schedule, seclogon,
SENS, SessionEnv, ShellHWDetection,
  Winmgmt, wuauserv
Could RADIUS be be the responsible? Why RADIUS will send so many attempts to the AD/DCs?
We´re using 802.1X with NPS n the DCs and user have two devices in the same physical port of HP the Switch: the user´s computer AND a Alcatel IP Phone, authenticated by a DOmain
User (service account) using MD5
We do not trace much information right now, but some of the users that are complaining about that, have changed their password recently, therefore, for some reason, the old
password are being re-used?

Hi Kay,
Since user passwords got changed recently, the account lockouts should be caused by stored expired credentials. Credentials can be stored within services, programs, scheduled tasks, scripts, RDP sessions or even mobile phones.
I suggest you try to locate the machine where bad password attempts are generated through event messages, or by using network monitor to capture real-time network traffic. After that, find the source which is sending the bad password, then clear stored credentials
on it.
If the source cannot be located, you may rename those problematic accounts to avoid subsequent lockouts.
More information for you:
Troubleshooting Account Lockout
https://technet.microsoft.com/en-us/library/cc773155%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
Troubleshooting account lockout the PSS way
http://blogs.technet.com/b/instan/archive/2009/09/01/troubleshooting-account-lockout-the-pss-way.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

HP Spectre x360 13-4002dx active pen and other issues

Hi, I'm havng issues with my active pen, but wasn't sure if it's an issue with my laptop or stylus (or if it's a software/driver issue). Is there an easy way to tell?Also, I've been using my laptop for a month now, and recently have had other issues, listed below. I wrote them down below in case that could provide some information, and/or if those issues are something I should be concerned about and should try to fix. To begin with, after doing some research, I bought a Synaptic active stylus (the Dell one), which worked very well for the first two weeks until last week. All of a sudden, it started to respond very awkward and randomly, sometimes it's too sensitive and draw lines even when the pen was off the screen, and sometimes it didn't draw anything at all even though I see the small circle following my pen tip. I initially thought it was due to low battery, but it's the same issue after I replaced the battery. Right now, the laptop doesn't respond to pen touching the screen (no clicks, no writings), although the pointer follows the pen. Any ideas on how to resolve this issue? How do I know if it's the pen that is faulty or if it's the laptop? Other issues I had or am having:1. Today, I had a BAD_POOL_HEADER error and blue screen of death. After reboot, everything seems to still work, but the login is now much slower. It's very fast to reach to the login screen, but it takes 2-3 minutes to bring up the desktop and other startup applications after I enter my password (I think it used to take less than 10 seconds). I tried rebooting 2-3 times, and it was always the same. 2. The laptop seems to gain heat very easily. With moderate workload (example, some websites with flash advertisements or videos), it can easily go above 70 degrees Celsius on either core (according to CPUID HWMonitor). One time, the system actually failed and forced hibernated due to overheating. (To me, the screen went blank all of a sudden. I turn the laptop back on, and the screen printed a message for a while saying it forced shutdown due to overheating. I realized it was hibernation after I logged in since I see all my windows) 3. On the second day of use of this laptop, the laptop just shutdown for no good reason, and then couldn't boot, saying it cannot find boot image or something like that. I looked up the web and found that it could be a BIOS issue. It said to try reseting the BIOS setting, and then it worked. I also upgraded the BIOS image to the latest after this incident. 4. This is probably more a router issue, but I initially had problems connecting wireless to my router. It was solved after changing my router. For those who are interested, the details is as the following: my old router supported up to 802.11n , but not 802.11ac, That shouldn't matter, but all wireless connections get disconnected once in every several hours if my HP Spectre x360 is trying to use the wireless. However the wired connections stayed ok when this happens, so the router is only "partially" killed. The fact that all wireless connections are getting killed seemed to me that the router didn't like something from my HP laptop. To be fair, I didn't try not using my HP laptop to see if the issue goes away, so it could be a coincidence that the router started to go faulty at the same time I bought and used my HP laptop. Anyways, it seemed it's a router issue, so after replacing the router. the issue went away. Thanks.

Will investigate and let you know what I can find out.
Although I am an HP employee, I am speaking for myself and not for HP.
Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

C309g (CD055A) no black and other issues..

Hey all.. Not sure which thing to post about first, so in random order, here goes....
I bought a used printer listed above in the subject.. It needed a new power supply, and ink, but seemed to be great. I purchased the regular size cartridges except the black which they had in XL size. I printed a total of 3 test pages (set up on three computers), I printed one 8x11 photo via bluetooth from my phone, and my wife printed 2 8x11 photo's from her PC. All 3 8x11's were on regular paper. Oh, and we printed one of the dots built-in pages.. So if you're counting (and I KNOW I am), that is a total of 7 pages. Additionally there may have been one demo page (possibly a total of 8 pages, then!), can't remember if I did that demo page on the previous owners ink or if I did one on the new ink I bought (previous ink was old/empty). Oh, and technically there was an alignment page, so final total 9 pages. After those nine pages, my magenta and yellow ink were both down to around 65-75 percent. It sat a week without use (literally, 7 days). Today I went to print some regular text (black only) and it shot out at me blank pages. I tried a few more times, and nothing but blank pages. Tired of running back and forth, I printed a built-in "school paper" page or wide ruled paper (heh, how cool in a pinch is THAT feature!). It printed perfectly - Course it's blue and magenta, no black..
So it's been awhile since I used inkjet, but I quickly rememberd the handy utility to clear/clean printheads. Ran that. It failed, assumedly for missing black (it had the gray'ish photo black, but not 'black' anywhere on the sheet. After the cleaning failed, I removed the black, and all the colors. Seems to be black in there (as should be!) I dabbed the bottom with a paper towel gently, it turned black... So I put it in, and it whirred away doing it's thing to re-align, and then it told me the shocking news that my printer was low on ink, and showed all levels to be well, I suppose about 10-15 percent remaining (think SMALL skinny lines). Now I know this is an estimate, but I'm concerned from the get-go that after only 9 pages it was down to 65%!!
Before I found the forums, I found a site that recommended removing the ink cartridges, and removing the print head itself and soaking the bottom portion (up to the wire meshes, slightly covering them, but not the entire thing) for awhile in IPA (isopropal alcohol) and then dipping them in fresh a fresh batch to 'rinse' then gently hitting them with compressed air via air compressor (or canned air, I suppose, have an air compressor) to remove any debris and get the remaining alcohol off/out. I then let it sit several hours to 'dry', which - it was probably ready immediately given the properties of IPA, but didn't want to chance it.. Re-inserted it and the ink, and..... SAME THING.
All the ink is official HP ink (since I'm sure that q is coming), was purchased from a big box retailer who ya all know and love or hate (no need to name drop).. I'm wondering if...
1. My ink, though coming out onto the paper towels could be bad/defective. Given the really fast drop in the levels of ink, and the issue with black not seeming to print, seems possible?
2. Should I try the boiling the print head - err not boiling it, but sticking it in recentyl boiled water, and give that a try? The guide that was posted here somewhere showed doing that, with IPA added to the water as an option. Is it possible the IPA didn't break up whatever gunk might be blocking the black, that boiled water might break up? Does that make sense, or would the IPA have broken it down?
How do these print heads work exactly, or is that the big company secret? I mean, is there a tube that goes for the inlet of black to the gold area underneath, cuz it's not directly under the gold like old fashioned cartridges used to be.. Is there any way to open up or access that area like, under the metal screens to get in there with a pipecleaner or something maybe, or something?
And, for bonus points (lol) Why does HP assign two names to their printers?? IE C309g (CD055A), If my printer is the C309g, why is it ALSO the CD055A?? SO confusing and un-necessary..
Thanks for your time and patience

I've had a similar problem with black not printing, though my printer is a B8550. I bought new and have used it fairly lightly I'd say, but after only a couple of years it suddenly stopped printing the photo black (it has separate cartridges for black for photos and black for text, etc.).
It prints on regular printer paper just fine using the other black--but not a drop prints of the Photo Black (yes, it's full). Since I've cleaned the print head, and even bought a new one, and a diagnostic print shows absolutely no trace of the photo black, I'm fairly sure the printer itself is at fault. It's sold as a 'Photosmart' printer, meaning it's intended to use to print photos--large format too--so without photo black it is a huge brick as far as I'm concerned.
I've begun to notice from these forum posts that there is an issue with HP and black ink, or at least whatever controls black for photo papers in their inkjet printers. If I'm not mistaken both yours and mine use the 564 cartridges, so maybe that suggests a common factor in such printers that is the culprit. I suspect HP knows there is a problem, either with the hardware or firmware, and I wish they would do right by us.

HT4528 IOS6 email forwarding and other issues

Similar Messages

Maybe you are looking for