HT4623 i updated my ipad 2 with ios 702 today and it has crashed only showing me a black screen with the itunes logo and a charging cable diagram on it. wont turn on at all, any help appreciated?
I updated my ipad 2 today with ios 702 and now my ipad has crashed only showing a itunes logo and a charging cable pidtogram on a black screen, wont turn on. Any help appreciated?
iPad is in Recovery mode.
Hold the Power button and Home button at the same time, keep holding, when you see the white apple logo appear and then let both go. Let it start.
Similar Messages
-
hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me ?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hello all, I got my ipod two weeks ago and it was ok.However, whilst charging it yesterday, I was buying something from Amazon and all of a sudden a message came up on the computer screen that i tunes had been encountered a problem.Since then all I get on the ipod is a picture of the i tunes logo, and a picture of the cable, with an arrow pointing to the i tunes logo, as if ive got to plug it in.Also since this happened, ive downloaded songs, but am unable to load these on to my ipod as the line on my page which allowed me to do this has disappeared.HELP!!!!
The unit is in factory reset condition. Connect to a computer that is running ITunes.
-
After I tried to download the latest operation system for my iphone 4s I got the message about my phone being in recovery mode. I went about the copying the software then the message "could not be restored reeor 3014 appeared What can I do to get my phone working again??? Please help
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
When i plug in my iPhone to itunes so i could restore because i found it, itunes gives me error code 2009. on my iPhone, all that is displayed on the screen is the itunes logo and a usb cable saying to connect it to itunes. Help please?
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. -
I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?
After restoring to factory settings/new iPod you will then have to restore from backup
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS(Ireally don't remember if it's a 3G or 3GS), iOS 3.1.2. Thanks for your help
please help me!!!
-
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
when i updated the ios the itunes logo and usb symbol appear on my screen and I cant do anything
Do what the screen is telling you to do
Connect the iPhone to your computer and restore with iTunes
Allan -
I was trying to transfer itunes to my macpro from my iphone 4 and the phone froze up with the itunes logo and a usb cord looking like its suppose to plug into the itunes.. Now my phone wont go past that screen and i cant use the phone at all... Help if you can?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
I just finished downloading and attempting the install of ios 7 on my iPhone 5. I'm using the newest version of iTunes.
And now, I'm stuck at the screen with the iTunes logo and the plug. But no matter how many times I try, recovery mode will not work. My phone is currently useless unless I can figure this out.No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
While downloading an ITunes upgrade, my IPad froze. All I see is the ITunes logo and pic of a USB cable on my screen. Tried to hold down the wake button while connecting the USB cable to override it but no results. Still frozen with ITunes logo. Any thoughts or suggestions?
Force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
My Classic IPod had been working perfectly with Windows Vista OS and on a dock. I left it unattended for 10 days, recharged it and tried to play music on the dock. All that shows on the screen is the Apple Logo and I am unable to restart or update the IPod. Any ideas???
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US
Maybe you are looking for
-
Can i have my templates empty...and when from my site someone choose print report the appropriate template and the appropriate datasource(given run time) produce the report?????
-
Ipod connects to computer but Itunes doesn't recognize it.
Whenever I plug in my ipod the window comes up asking what I want to do with my music. When I click Itunes it says: IPodService Module has encountered a problem and needs to close. I have reported the error and have made sure my Itunes is up to date
-
Everytime I open itunes it says do you want to allow this program to make changes to your computer
It opens but it's annoying as **** it never did it when I when I first bought it
-
Hi, I have a problem(in HiQ ver4.1) in communicating with Matlab(ver 5.3.1). That problem is as below. >matlab >>x=eye(2) x = 1 0 0 1 >>x ??? Undefined function or variable 'x'. >> What's wrong??? I have launched matlab with "/regserver" option. Plea
-
I installed a trial version of Adb Pre Elements 11, then bought the same app at the AppStore. I want to uninstall the trial version without affecting the one purchased. Please, what's the procedure?