HT5654 after trying to update my iphone4 my phone froze with the itunes logo on the screen. tried restoring the phone without success
After trying the latest update for my iphone4, my phonehas the itunes logo frozen onto the screen. I tried to restore without success. The logo remains, if not plugedin the phone soon shuts off.
See if this helps
http://support.apple.com/kb/HT1808
Similar Messages
-
I received a notice to update my ipad to the latest version of ios7 and when I did the ipad froze with a itune logo and an ipad connector image on the screen..i have turned it off several times but it remains frozen. anyone help with this?
Unfortunately, your iPad went into recovery mode and must be restored now. There is no getting around this. You need to use iTunes to do this as well. Read this for more instructions.
If you can't update or restore your iOS device - Apple Support -
After trying to update to ios6 my ipod touch will go from logo to blue screen, any help?
after trying to update to ios6 my ipod touch will go from logo to blue screen, any help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I was trying to update my iphone4 and it froze on a screen telling me to plug it into itunes
i was trying to update my iphone4 and it froze on a screen telling me to plug it into itunes
did you try to put it in DFU mode. You will know if you are in it because instead of a plug into itunes screen, you will just get a black screen http://www.iclarified.com/entry/index.php?enid=1034 If dfu doesn't work you can get out of it buy holding home and power. Take it to apple or geek squad if I'm no help.
-
I Tried to update my iPhone4 & now it's dead & the apple screen is Flashing on & off until the battery runs out!
Hey RubyRunistein,
Thanks for the question. I understand you are experiencing issues with your iPhone 4. Based on the symptoms you described, it may be necessary to restore your iPhone in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
I tried to update my iphone,,ran downstairs ot garden since it took 30 minutes. I cam e back with an itunes logo and plug on the front cannot use my phone or call it....apple's store in tampa is close...I will probably get in a car accident on my way to the store 1 hour and 30 minutes away after I get pulled over for speeding after I get a flat tire(;
Hello hstacy
Check out the articles below to troubleshoot issues with resolving issue with issues updating your iPhone. If you are having issues with it not being seen, pick one of the two articles that goes with the type of computer you have.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G. -
After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!
kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport -
I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?
Zach Doody wrote:
itunes says i cannot update the phone as it is in recovery mode.
That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
Restore it. You don't have a choice at this point. -
I tried to do the 7.0.4 update on my iphone 5 and now it has the itunes logo stuck on screen and when I plug into itunes it states my phone needs to be restored. I don't want to lose all my stuff.... ideas?
here is solution
http://support.apple.com/kb/HT1808
You have already lost it at this stage
but you have a backup of course -
Im trying to update db table in user exit, with the internal table
Im trying to update db table in user exit, with the internal table
my scenario:
loop at itekpo.
updating itekpo -
> at the end of user exit the db table ekpo have to be updated
endloop.
Im updating internal table, using
MODIFY itekpo TRANSPORTING INCO1 INCO2 WHERE ebeln = itekpo-ebeln
where itekpo is internal table, but it is not updating the db table 'ekpo'.
i also tried updating ekpo directly !
Thanks in advanceHi,
you can search in the forum itself,
Try this link for instance
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=tocreateaBADI&adv=false&sortby=cm_rnd_rankvalue
You can find a code for finding BADI as a report with the following Transaction
finding badis
How to find BADIs
Reward if helpful
Regards
Byju -
It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?
Hi clintfromid,
Thanks for using Apple Support Communities. I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari -
After installing two updates, I cannon create .pdf documents as the window says "Missing PDF Maker Files." I've uninstalled Acrobat and re-installed twice, same problem. How do I correct problem?
Thank you. I googled my problem and got good answers involving making changes to my Office settings - which worked.
Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone -
while trying to update my iphone 4 last night, it froze with the itunes logo and a plug underneath. Can I fix this? How?
See: http://support.apple.com/kb/HT1808
-
Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)
Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)
-
After the most recent iPhoto update, I keep getting the following error: "iPhoto quit unexpectedly while using the Sonix SN9c201 webcam plugin." This seems to happen after *every* iPhoto update. Is there a fix on the way?
As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions? -
After a firmware update to airport express should I unplug the unit wait a bit and plug it back in? (basically a reboot)
I updated the firmware on the 2nd of this month. Everything was fine. About a week later internet speed began to be slow. I rebooted the modem and the speed was okay for awhile, then slow again. I'm wondering if it's the airport express. It didn't tell me to reboot at the end of the installation.
Maybe you are looking for
-
Hi friends, as per the old message I am trying to create a spool request which further will be downloaded to PDF format. I am facing a problem, as per message when I try to do write in worte_perform I am receving ABAP dumps with Illegal page number
-
SRM-MDM 3.0 SP10 Patch 1 - logon failed
Hello there, we have a urgend problem after upgrading the SRM-MDM Components and the MDM Server. Problem is, that we are not able to logon to the app ui or the search ui. It's not a Problem with the user. When logon to the app ui we receive the messa
-
Hello, In Oracle Forms. For block property in "Query Data Source Type" under DATABASE property is Table but "Query Data Source Name" is blank how to find which is base table for that Block?
-
Hi I have a Swing ADF application using the excelent binding framework. Many of my tables has a reg_user and a mod_user column. reg_user is set when a new row is created. mod_user is updated when a user updates the row. Could I have the ADF framework
-
Open URLs in a specifc firefox window
Hi All, I generally have two, maybe three, firefox windows open at all times. I have firefox set to open new urls a tab (vs opening a new window). The problem I have is when selecting a link in another program (weechat, mutt, xpdf) I'm not always s