HU and SU number range

Hello,
If storage location is HU and WM managed ( SU management active), is it required that for the number range of  HU simialr overlapping number range has to be maintained for SU (assigned to the warehouse)?

Hi,
you activate handling unit management independent from storage unit      
management.                                                                               
Only in case if storage location is full-WM- AND HU-managed the storage  
unit management is always active and HU numbers are taken over as SU     
numbers. In all other cases HUM and SUM are independent from each other  
and number ranges must be set a way that they are not overlapping.       
Regards,
Ely

Similar Messages

  • New Document Types and new Number Ranges

    Hi,
    Plz tell me How to configure New Document Types and new Number Ranges for Services and Asset Purchases.
    How can i maintain Services with or without Master data.
    Plz tell how much services are there and how to configure step by step

    Hi
    New document type can be configured in SPRO - SAP IMG- Material management - Purchasing - Purchase order - Define number rabges / define document types.
    With out service master straightaway you can create the Service PO with account assigment.
    AC03 - Create service master record.
    ML10 - Model service specifications
    Then Service conditions ML33 or ML39 or ML45
    Create the PO and then do the service entry in ML81N
    Regards,
    Raman

  • Same FI and SD number ranges

    Hi,
    How can in the system FI and SD number range for billing documents be made same.
    thanks
    Rekha

    Hi,
    FI and SD number ranges can be made same for billing documents. SD number range should be made internal and FI number range should be made external.
    Thanks
    G.Bharathi

  • Internal and external number range for a deivce

    Hi Experts..
    We have a client requirement where in we need to have both external and internal number ranges defined for the device.
    But while creating a device it always takes external number range and never takes internal number range.
    What is the possible reason for it and how can i rectify it.

    Hi Arvind
      do u mean even when an  externam  name is provided in  the device creation and still the screen does not accept it?
    let me know
    kr
    raj

  • Define groupings and assign number ranges

    Hi,
    I want to ask about customizing
    In Recacust --> business partner --> Relevant setting for BP in RE context --> number range --> Define groupings and assign number ranges
    There are Internal Standard Grouping column and External Standard Grouping column.
    What is that for ? if i set both of them to active, what's the effect ?
    Thank you

    Hi,
    If I tick the "ext.std grping" in one of BP grouping (for example in grouping 0002). Grouping 0002 will be used as standard grouping. The BDT selects this standard grouping if a business partner number was assigned to a business partner when the latter was created, but not a grouping.
    Then,,, when i try to delete external grouping that used as the standard grouping, there was a message "External standard grouping 0002 must not be deleted"
    How to un-tick this "ext.std grping" ?
    I think this affected the BP creation. Now, I can't create BP, there always an error message "GET_BUSINESS_SYSTEM_ERRORAn error occurred when determining the business system"
    Thank You

  • FI and SD number range same

    Hi,
    How can in the system FI and SD number range for billing documents be made same.
    thanks
    Sekhar

    Hi,
    FI and SD number ranges can be made same for billing documents. SD number range should be made internal and FI number range should be made external.
    Thanks
    G.Bharathi

  • Lexicographic flag setup and material number range change

    Hi gurus,
    got the following situation:
    AS IS:
    Tcode MMNR: Number range for material master part number: AAAAAAAAAAAAAAAAAA   to   ZZZZZZZZZZZZZZZZZZ  (lenght 18, external assignment)
    Tcode OMSL: Lexicographic flag IS NOT setup
    Tcode OMS2: For all material types flag "External no. assignment w/o check" IS SETUP
    Basically we can't create numeric only part numbers.
    The new requirement is to be able to create numeric part numbers like:
    1234
    12345
    0123
    01234  (where the leading zero is a significant character for the part number)
    By doing the following changes:
    MMNR: change number range 000000000000000000  to ZZZZZZZZZZZZZZZZZZ
    OMSL: setup lexicographic AND leading zeros flag
    OMS2: clear flag for External no. assignment w/o check
    I see I do achieve the result: numeric part numbers can be created, leading zeros are managed in the correct way and all numeric part numbers are LEFT-aligned, so looking to MARA you would see part numbers like this:
    00012345
    012345
    012345V
    09CATALIST1
    0AFVAU0001
    12345
    23225V
    23243V
    2SIMBACK3210
    I did already tried all the above changes in the quality system, then created a numeric part number and an alfanumeric part number, for both of them did create a PO, Inbound delivery, posted MIGO, created a sales order, outbound delivery, PGIed without any issue, stock was displayed and managed correctly by the system, same for material docs.
    We already thought about BW, so in case we do the changes BW would be ok.
    Apparently everything is fine so I should go for the production system BUT........  in my mind I'm thinking that OMSL Tcode is usually setup day 1 of an Sap project and then usually you forget it... I have the fear that even if everything looks fine (and Sap allows me to change the customizing), I'm going to muck up the system...
    Have you ever had the same to do ?  I already saw posts similar to this one but already existing conditions were different so to me this case looks like unique so far..
    Any help, suggestion, whatever will be highly appreciated, especially cause I have to take a decision by tomorrow morning
    Many thanks in advance !!
    Enrico
    Edited by: Matt on Aug 13, 2011 7:39 AM - profanity removed

    As you never had numeric numbers, it should not create a big problem.
    I am working in a system with lexicographical setting in use.
    But you have to keep in mind that your sort sequence is quite different to numeric numbers, like this:
    1
    10
    11
    12
    2
    3
    31
    311123
    32
    32012
    4
    And you may get the one or other issue if you download material numbers to Excel, with wrong settings you will loose your leading zeros.
    A similar effect happens most of the time if user not very familiar with Excel give you a file for an upload, as this often is prepared without leading zeros, which could cause a load to the wrong material if the remaining number would be a duplicate:
    0123 and 123
    Of course is a selection by number range  not that easy as it is with numeric numbers.  Usingthe first example a range from 1 to 3 includes materials 10, 11 and  12 as well

  • Invoice and Accounting Number ranges

    Hi,
    I have a requirement where the invoice number and the accounting document number should be same. Ie: If I generate an invoice with number 101. The same number should be populated for the accounting document as well.
    Regards,
    Sam

    Hi Sam,
    Yes. The path is SPRO -> Sales & Dist -> Billing -> Billing Documents -> Define number ranges for billing documents.
    I dont think you can have an external number range for a billing document. Infact the provision is not available in the billing document type config screen.
    Regards
    Nadarajah Pratheb

  • Internal and External number ranges

    Hi,
    If we have already created an internal number range and posted few SA documents. Then can we change the internal number range to external number range or vice versa(i.e external to internal number range)
    Regards
    Adnan

    Hi Kalyan,
    Thanks for the information. but just now i have tried changing the external number range to internal number range. It was successful. But i was not able to change internal number range to external number range
    However, when i changed the number range from external to internal i had to also change the current number (so that the document numbers already posted should not conflict)
    Regards
    Rogers

  • Depreciation Document and its number range

    Hi
    Currently we are in process of migrating system from ECC 5.0 to Ecc6.0.
    ECC 5.0 for depreciation document number range was external. So when we copied the existing system to upgrade, system number ranges were copied as external for Ecc6.0
    When we are trying to run AFAB (Depreciation Run), it is giving error like number range should be internal.  So i have to change that.
    When i go to FBN1 and trying to remove flag for external, it is not allowing. It is display status for that column.  I have authorisation to change FBN1. 
    Can any one guide me to how to remove that flag.
    Thanks and Regards
    Ramarao.p

    When you have a authorization problem you have first to solve that, it is possible the remove it (it is then removed for all the years for that number range, not only the last year!!)
    The steps are:
    FBN1   Change intervals, remove the flag Ext
    SE16  Table TABA. Select the current fiscal year and you will see the last used document (when you want to do depreciation for old fiscal years you have to fill in the number ranges to)
    FBN1  Change status, fill in the last used number.

  • MIRO and MIGO number range for new financial year

    All SAP Gurus,
    We want same number range to be continued for MIGO and MIRO documents.
    Is it needed to create the number range for MIGO and MIRO for new financial year or same number range will be continued automatiaclly?
    Regards,

    hi,
    The number range to be applied for the MIGO And MIRO documents depends on the YEAR which you have feed while maintaining the number range...If you want a new number range for next year, then you can maintain it from above transactions...Or if you wanna continue wid the same then can use the same number range as well...
    As suggested maintain the number range get it applied, but remember if you maintain the number range as 2010 then that number range will be valid for the given year only...but if you give the number range 9999 then it will be valid upto 9999 year...
    Hope it helps..
    Regards
    Priyanka.P

  • How to display even and odd number ranges between two given inputs.

    Hi Every one,
    I am just started my career in sap abap and trying to find the solution for this.
    I am trying to display number range using select options, but I am getting an error "Memory low leave the transaction before taking a break".
    Example: when I give two number 2 and 10 , it should display set of all even and odd numbers in that range.
    Below is the code logic that I am using:
    data: a type i,
             b type i,
             c type i,
             d type i,
             num type i.
    select-options: in for num.
    a = inp-low.
    b=inp-high.
    c = inp-low mod 2.
    d = inp-high mod 2.
    while a <=b and c = 0.
    write: "even numbers:', a.
    b = a + 1.
    endwhile.
    while a <=b and c <> 0.
    write: "odd numbers:', b.
    b = a + 1.
    endwhile.
    Any help will be much appreciated.

    This is your logic...changed:
    data: a type i,
              b type i,
              c type i,
              d type i,
              num type i.
    data: even type i,
           odd  type i.
    select-options: in for num.
    a = in-low.
    b = in-high.
    c = a mod 2.
    if c is INITIAL. "It measn a is even
       even = a.
       odd  = a + 1.
    else.
       odd  = a.
       even = a + 1.
    endif.
    * Even
    a = even.
    while a <= b.
       write: / 'even numbers:', a.
    *  b = a + 1.
       a = a + 2. "The next even number
    endwhile.
    * Odd
    a = odd.
    while a <= b .
       write: / 'odd numbers:', a.
       a = a + 2. "The next odd number
    endwhile.

  • CASE Statement - and checking number ranges

    I am attempting to write a bit of SQL that can be used to do a count of Requisition Values, in different value bands, e.g.:
    0 - 250
    251 - 500
    501 - 1000
    etc...
    I have got this far:
    SELECT   sum_value
           , COUNT(req_id) req_ct
        FROM (SELECT   prha.requisition_header_id req_id
                     , CASE SUM(prla.unit_price * prla.quantity)
                          WHEN 250
                             THEN '250'
                          WHEN 500
                             THEN '500'
                          WHEN 500
                             THEN '1000'
                          ELSE 'OTHER'
                       END sum_value
                  FROM po.po_requisition_headers_all prha
                     , po.po_requisition_lines_all prla
                 WHERE prha.requisition_header_id = prla.requisition_header_id
                   AND prha.creation_date >= SYSDATE - 3
              GROUP BY prha.requisition_header_id
                     , prla.requisition_header_id) rt
    GROUP BY sum_value;
    SUM_V     REQ_CT
    250            3
    500            6
    OTHER        726But - it is not that great, in that it counts REQs with an exact value of 250,400,500 etc.
    I am trying to work out the syntax to allow the CASE statement to work with ranges, but I can't work it out.
    I have naively attempted this, for example:
    WHEN > 250 AND 500
    But that errors out, because I can see that the '>' needs to know what it is checking
    Any help much appreciated.
    Thank you

    Thanks for the reply Sarma,
    I've attempted that:
    SELECT   sum_value
           , COUNT(req_id) req_ct
        FROM (SELECT   prha.requisition_header_id req_id
                     , CASE SUM(prla.unit_price * prla.quantity)
                          WHEN BETWEEN 250 AND 500
                             THEN '250 - 500'
                          WHEN BETWEEN 501 AND 1000
                             THEN '501 - 1000'
                          WHEN BETWEEN 1001 AND 2500
                             THEN '1001 - 2500'
                          ELSE 'OTHER'
                       END sum_value
                  FROM po.po_requisition_headers_all prha
                     , po.po_requisition_lines_all prla
                 WHERE prha.requisition_header_id = prla.requisition_header_id
                   AND prha.creation_date >= SYSDATE - 3
              GROUP BY prha.requisition_header_id
                     , prla.requisition_header_id) rt
    GROUP BY sum_value;But I can see that it doesn't work because I need to state what 'blah' is!
    For example, if I tried to state 'blah' as follows:
    SELECT   sum_value
           , COUNT(req_id) req_ct
        FROM (SELECT   prha.requisition_header_id req_id
                     , CASE SUM(prla.unit_price * prla.quantity)
                          WHEN SUM(prla.unit_price * prla.quantity) BETWEEN 250 AND 500
                             THEN '250 - 500'
                          WHEN SUM(prla.unit_price * prla.quantity) BETWEEN 501 AND 1000
                             THEN '501 - 1000'
                          WHEN SUM(prla.unit_price * prla.quantity) BETWEEN 1001 AND 2500
                             THEN '1001 - 2500'
                          ELSE 'OTHER'
                       END sum_value
                  FROM po.po_requisition_headers_all prha
                     , po.po_requisition_lines_all prla
                 WHERE prha.requisition_header_id = prla.requisition_header_id
                   AND prha.creation_date >= SYSDATE - 3
              GROUP BY prha.requisition_header_id
                     , prla.requisition_header_id) rt
    GROUP BY sum_value;It still errors. I guess I am doing something fundamentally wrong, but I can't see how I can refer to the 'sum' value, to then use it in the Between section of the Case statement.
    Thanks

  • PO number range- change from internal to external  and then change it back

    we have following situation- we had certain issues with the system where most of the data got curreptrd except data relative to procurement for dates March 7 to March 30.  We have extracted the procurement data - PR / PO etc for the dates March 7 to March 30 and we want to upload this data in the uncorrupted enviornment dated  March 6 using the old numbers originally assigned by the system.
    I need to change the configuration for PR and PO number range from Internal to external so we can upload PR and POsfrom March7 to March 30 and then swich the number ranges back to internal so we can enter new data dating from March 31.
    What is the best way to do this?
    Thanks in advance
    Raj

    Hi
    Create external number range and assign  it to theno. range external in that Document type then you can use both internal and external number ranges for that doc without disturbing the system once completed remove the external number for that doc type. while creating the PO give the number you want before saving so that the PO will be saved with the number you had given.
    Note: Make sure that you are not using duplicate PO no already assigned
    Kiran

  • Vendor acct group and number range in the MDC vs MDS

    IN MDM 3.0 when a new BP with vendor as role is created via UI in MDS the vendor is created with a generic BP number range in the MDS.  The down stream MDC's all have different vendor account groups with different number ranges assigned in each MDC..  example...
    client     type of vend   acct grp      num range
    MDC1      purch vendor     com2      1000000-1999999
    MDC1      acct vendor      act1      2000000-2999999
    MDC2      purch vendor     pur1      2400000-2499999
    MDC3      purch vendor     POV1      3599999-3599999
    How does MDS know when it distributes the vendor to the MDC's what account group and number range to create the vendor with in the MDC's.  The MDC cannot change all its existing master data that has been created already with the account groups and number ranges becuase field variants have been established.  Where is this mapping contained MDS or XI and how is it done.

    The number range in the MDS is determined by the value in the "Grouping" combo-box.  This combo-box is populated by values entered in IMG activity Master Data Objects -> Business Partner -> Business Partner -> Basic Settings -> Number Ranges and Groupings -> Define Groupings and Assign Number Ranges.  Each value must have an associated number range and one of the values must be defined as the standard grouping in case the user doesn't select a grouping.  This is how numbering occurs in the MDS.  Unfortunately you cannot assign more that one grouping to a new BP.
    Now, for the MDCs.  When sending a new BP to an MDC, for example an R/3, there must be an external number range setup in the MDS for that MDC and it shouldn't conflict with any number range in that MDC. 
    IMG Activity Master Data Exchange -> Central Settings -> ID Mapping -> Make General Settings for ID Mapping allows you to define which number range you want to use for a specific object type in a specific system (e.g. KNA1 (customer) in system R/3_100). 
    So far this isn't sufficient for you because you have 2 number ranges for MDC1 in your example. 
    In the IMG activity I just mentionned, there is also a possibility to add an additional parameter which allows you to assign a number range for each unique object-type/system/additional parameter combination.  By putting the account group in the additional parameter field, this allows you to assign number ranges per account group.
    What remains to be done is to use this information in the XI Mapping for BP to R/3 Vendor.  The first thing is for the XI Mapping to map the MDS account group to the MDC account group.  Then the XI Mapping must call the MDS to create a new ID-Mapping between the BP and the Vendor.  During this call, the XI Mapping must provide all the usual parameters as well as the account group.  This will ensure that the correct number range will be selected so the correct vendor id will be generated.  This id will then be used in the ID Mapping.
    If you need to create the Vendor for multiple account groups, then you will have to implement special logic to map the MDS account group from the BP to the many MDC account groups needed for the Vendor.
    Hope this helps!

Maybe you are looking for

  • Remote key issue

    Hi, Can someone explain me briefly why should I consider remote key mappings for Sub tables, look ups, hierarchy, taxonomies, qualified? Using XML files based on XML schemas in Console I am finding it difficult to assign the Customer_Number (appearin

  • How do you make photos vertical in iPhoto calendar?

    When making a calendar in iPhoto, and you choose 6 or 7 photos to be displayed on that month, how do you make the 4 little photos vertical?

  • RAW image workflow problem

    I originally posted a similar question about a strange behaviour when using Adobe DNG files. The issue first appeared some time between 6 and 21 December when converting Minolta RAW files to DNG; before that conversions had gone smoothly and it took

  • Authorization Check in BI7 using ABAP

    Dear Experts, i've got a question regarding how to check authorizations in BI7 using ABAP. How do i check authorizations? In Detail: I want to check, whether a user has the appropriate authorization to access an company code. For that i created an au

  • Add viewport to jpanel

    i am really confused regarding the size of my Jpanel(it change as the frame, it shouldn t) and the implementation of a view port with could you help me is really important i have submission on monday pls package help; import java.awt.*; import javax.