HU in multiple storage location

Can HU resided in multiple storage location?? I'd like to know if it's possible to transfer partial qty of an HU into multiple storage location with the same plant/whse. Here is the scenario:
HU1234 has 100pcs in plant ABC 0001 whse 011 bin aa-001-c
Is the below possible or would I need to have unique HU ids for the other three HUs.
HU1234 25pc in plant plant ABC 0001 whse 011 bin aa-001-c
HU1234 25pc in plant plant ABC 0002 whse 011 bin aa-001-c
HU1234 25pc in plant plant ABC 0003 whse 011 bin aa-001-c
HU1234 25pc in plant plant ABC 0004 whse 011 bin aa-001-c

I also think I need to separte HUs but I just making sure I'm not missing something.
The business scenario is that we want to create a plant w/ mulitple storage location to move inventory in and out for specific key customers "Geo Hub" we are trying to avoid having to handle the HU and limit physical movement until we actually need to ship it out on an Outbound DN.
I know in our current enviroment we can only transfer a full HU via HUMO and if we want to transfer a partial HU we move it to repack and split it.

Similar Messages

Inspected stock posting to multiple storage location without batch

Hi,
At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
Quick response will be appreciated.
Anandkumar KS

The scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use. You obviously aren't using the 553 movement type as that writes off the material. That could give you two lines to use for your scraping. I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today. If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
You can also change the displayed names of the stock posting lines. That's explained in the config file as well.
Craig

One Shipping Point for Multiple Storage Location

Hi
How to ship a sales order from Multiple storage location.The system is not accepting .Can any one tell us the missing portion ?
Thanks

We want to assign Shipping Point to Multiple Storage Location.It is all batch Managed ..The Material will available in two or three location.We don't want the stock to move to shipping location.We want to confirm at the time of creating sales order with the available location to one shipping point

MF60 Multiple Storage Location Check

Hi Friends,
Could someone please tell me if it is possible for the Pull List (MF60) to look at multiple storage locations (say a staging location and a stock room)? If it possible then what config do I need to do?
I would really appreciate your help. Thanks
Regards,
JP

Hi Mahesh,
I have tried that already but I faced the following problems:
1) If there is a storage location assigned to the Material then when I run MF60 it only checks for the Material in the specified storage location even though I might have defined the stock determination strategy and defined the sequence for two storage locations in it.
2) if I dont assign any storage location to the material (in the marerial master, BOM or routing) then when I run MF60 it doesn't come up with anything even though I have defined the stock determination strategy and defined the sequence for two storage locations in it. My production order doesn't show an issue storage location for the components but in this case if I do a order confirmation, then it uses the stock determination strategy to issue the component using the sequence defined
I hope I have explained these problems clearly but please let me know if you need any further information. I really appreciate your help.
Thanks,
JP

Mc.9 Multiple storage location issues

Hi,
I am fetching data from mc.9 in my program but if the use enter multiple storage in selection only 1st value is printed following is code and how will i come to know which material is for which storage location since mc.9 data is not getting stored anywhere
SELECT-OPTIONS : SLOC LIKE S031-LGORT.
SUBMIT RMCB0300 WITH SL_WERKS-LOW = PLNT
                    WITH SL_LGORT IN SLOC
                  WITH SL_MTART = 'HALB' WITH SL_MTART = 'VERP'
                    WITH SL_MTART = 'ROH' WITH SL_MTART = 'FERT'
                    WITH SL_SPMON-LOW = FPERIOD
                    WITH SLV_NO = 'STK'
                    WITH SL_SPMON-HIGH = FPERIOD EXPORTING LIST TO MEMORY AND RETURN.
while append to internal table even if i specify both high and low value it prints low and high incorrectly how will this problem will solved
itab-lgort = sloc-low.
Help required for same.
Thanks
Shruti

Hi Shruti,
I simulated the code given by you and all the storage locations are being populated in the backed.
You can check this by putting a breakpoint at the below code in RMCB0300 and checking the value of sl_lgort[]. You will receive the number of SLOC inputs provided.
AT SELECTION-SCREEN OUTPUT.
FLG_FOUND = FALSE.
PERFORM SPEZIAL_AT_SELECTION_SCREEN_O IN PROGRAM (LIS_PROGNAME)
                                        CHANGING FLG_FOUND
                                        IF FOUND.
This is a data issue and you may not have any records for the selected input.
Regards,
Jovito.
Edited by: dsouzajovito on Dec 29, 2010 5:56 AM

Multiple storage locations for single material - ECC 6.0

Hi
Can anyone let me know, how one can map multiple storage loctions for single material?
regards
Sanjay

hello,
Go to SPRO --> IMG --> Materials Management --> Inventory Management and Physical Inventory --> Plant Parameters.
Tick Create storage locations automatically. System will extend the material to the storage location maintained in the transaction.
Nikhil

Good receipt against multiple storage location

Hello All,
I have a senereo where more than one project is going on. In my case there are 200 common materials
which are required for all the project. Every project is having their own storage locations.
I am creating PO for material containing the common reqt of all the project but at the time of good receipt
as usual it is going to only one storage location casue every material has only one storage location in material master.
Now please guide me is it possible to do the good receipt with multiple storgae location at one time itself?
Thanks in advance.
Shailesh

Hi Sandeep, (Please read without acct assignment please)
I must thanks u whole heardly as due to ur answere my big question got solved. Well i have add ur gmail id in to my freind list. I am sure u won't mind & u will help me in future too.
Well one more ques. i have .Can we create PO ( with out Acct assignment ) where we can put 2 diff. storage location for a single material. I mean insted of distributing the qty in migo level can we distribute this qty at PO level ?
2) Is there any thing provision in MM where we could delivery any notes against any PO to the good receipent at the time of MIGO. I require this as per the last case that at the time of migo , good recceptant can distribute the qty to differnt storage location but how can he come to know unless we inform him by means of any text notes in PO or is ther any other methode from which good receptient can know how much qty to be distribute?
Thanks in advance
Edited by: Shailesh Dulange on Apr 11, 2008 5:08 PM

Stock determination with multiple storage locations

Dear Friends,
Kindly suggest how to do the following configuration in Stock
Determination.
The scenario is
For example Unrestricted Stock existing for material " X":
Plant 4000: 10 Qty
Sloc1 -- 6 qty
Sloc2 -- 4 qty
There is sales order (only plant is specified in Sales Order, No sloc) for 7 Pcs when the stock determination process is carried out it is showing the stock available is 10 qty. But when they make the PGI it is picking only 6, ie., from SLOC1, but it is not picking the balance 1 qty from SLOC2 even
though the material is available.
The same problem exists for Production order also.
Thanks,
Regards.
Krishnan.

Hi Hari...
Make sure you have maintained the priority for sorting & the item table for the same.
Also in the No.Splits ( number of splits ) give a maximum possible value like 999.
The problem happening in ur case is, i think this fiels in blank in configuration . So system is stoping the quantity spliting, which will look for the series of S.Locns till the target quantity is reached.
Reward points if useful/solved.
Thanks
Mahesh

Split shopping cart into multiple PO depending storage location

Hi ,
In our implemenation (Extended classic-SRM 5.0) , have requiement to have mutiple Local POs from a shopping cart where there are multiple storage locations for same plant ,same vendor,same purchasing group,same purchasing organization,same delivery date.
In SRM standard Shopping cart can be splitted into mutiple POs if there are mutiple vendors or multiple purchasing group or mutiple purchaisng orgnization or mutiple delivery date or combination of them but not for mutiple storage location location. As storage location in line item level of PO, SC can't be splitted into mutiple POs in SRM standard.
Is there any way we can fulfill this requirement. ?
Regards
Dayal

Hi,
Have a look at BAdi BBP_GROUP_LOC_PO, it will cater your needs.
I hope it helps.
Regards,

Inspection lot for Mvt type 311 between two storage location only

Hello all,
I want to create an inspection lot only whenever my material transfer between two particulars storage locations. e.g if i have multiple storage locations, then i need an inspection lot to be created whenever my material transferred from say X S.Loc to Y S.loc only. For other transfers i don't need to create an inspection lot even from Y to X.
For more clarity, suppose i have ten storage locations. i have also created one storage location for my Lab. So I want an inspection lot to be created only when my material transfer to my Lab storage location from any other storage location, not when i transfer from my LAB to any other S.Loc or between two S.Loc other than LAB.
I have activated inspection type 08 but it does not have a restricition on S.Loc.
So please suggest some solution for the same.

Dear Amit
In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
So whenever you want inspection lot to be created use Z11.
You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
Regards
Gajesh

Storage location for material to be made mendatory and default

Hi,
We are generating PR of material through CJ2N. I want to make storage location filed in generatl data tab of material, mandatory as well defalut value depending upon the project. If defalult value can not come depending upon project defination then i want to make default value as blank but mandatory
How can i do this?
Regards,
Kalpesh

Dear Kalpesh,
In standard SAP the storage location will be an input field and no default values will get populated when you attach a material component in the activities as the material master will be extended to multiple storage locations.But in your case if is coming as default either some screen variant must exist or some parameter Id would have been maintained.Check Which & How the storage location is getting defaulted from your MM consultant.

SAP AFS - VL10B delivery from specified storage location

Dear all,
I have created STO for an AFS material.
As this material is available in various storage locations of the supplying plant.
Now I am trying to create delivery through VL10B, entered the Purchase Order, Plant and specific location in the material tab, but system is not generating any outbound delivery in the background.
again, in VL10B, if I have not specified any storage location in the material tab, system is generating the Outbound delivery for multiple storage locations with reference to batch split.
How come system is not picking the specified storage location in VL10B transaction.
Can I specify the issuing storage location while creating the STO, so that during VL10B, automatically the system will pickup the same storage location.
thanks in advance,
urendra

Dear Urendra,
If you creating a delivery for an AFS material, system picks the stocks based on the allocation rule defined in the system. Hence first efine the allocation rule in the system.
To achieve the functionality of issuing stock in case of a STO from a
particular storage location kindly maintain the below customizing.
1) Go to transaction J3AS -> arun detail -> define allocation logic ->
stock sorting
3) Here maintain a stock sort rule .
5) To this sort rule you can assign fields in this case it would be
LGONR with field values EW and QA
6)Once that is done, give the priority to the storage location in
accordance to your requirement.
7) Assign this sort rule to the main Arun type following the
path J3AS-> ARun type-> here select Arun type and then under allocation tab
go to the allocation rule maintained , out here there is the option
stock sorting.
Once this is done the storage location picked would be in the order
of the above mentioned priority.
Only if there is no stock in storage location of higher priority
will the stock be then picked from storage location of lower priority.
I hope this helps.
Regards,
Rakesh

Storage location field in service PR

Hi,
I am not able to find the storage location field in service PR generated through PS. This field is available for material component but not for external activity with service.
Actully i have a project which have multiple storage location thats why i need that field for external service PR
Regards
Kalpesh

Hi,
there is no need of storage location for external services.
storage location:
storage location at which the material is stored.
an organizational unit allowing differentiation between the various stocks of a material in a plant.
regards,
sandeep

Plant n storage location control

Hi all,
how can we control the plant and storage location control?
If I creaet PO for one plant, I must not create PO to other plant.
Thanks

Hi,
You have created PO for ONE plant only, but one plant have multiple storage location and also created PO to multiple storage location in one purchase order based on authorization.
Plant and storage location control through authorization of create,edit/change,display,print of PO.
Hope, it is useful for you.
Regards,
K.Rajendran

GATP - Checking Multiple Storage Loations

Hello,
We have a requirement to check for stock at multiple storage locations within a plant.
On order entry, they want to use our default Storage Location (SLOC001), which is the one we ship out of. If there is no stock available there, they want the system to look at the second Storage Location (SLOC002). However, they do not want the Storage Location to flip on the Sales Order from SLOC001 to SLOC002... they want the confirmation to look like it is against SLOC001. This way the Sales Order remains confirmed using the Dates from GATP. Then if the delivery is created and no stock is in SLOC001 but there is stock in SLOC002, we are going to block the delivery for a manual resolution to transfer the stock from SLOC002 to SLOC001.
Basically, they want SLOC001 to include SLOC002 stock.
A few caveats unique to the system:
1. SLOC001 contains the General Available Stock
SLOC002 contains Quality Inspection Stock
2. Stock Type Quality Inspection for General Availability cannot be used because we are also using SAP QM, but not with Material Movements. Basically, an interface with a 3rd party Warehouse Management System creates an Inspection Lot in SAP while another interface from the same system Goods Receipts product into SAP SLOC002 shortly after the Inspection Lot is created. We have looked at the other stock types within SLOC001, but they all seem to have ties into other areas (such as Batch Management).
Is it possible to accomplish this in GATP? Using Rules Based ATP, possibly?
Any help / suggestions / ideas would be greatly appreciated.
Thanks in advance,
Brian

Brian,
I haven't done much with sublocation ATP myself, (in APO a sublocation is the equivalent to an R/3 storage locn) but think standard GATP product check without any mod and without RBA would work.
When you set up your ATP Check controls, make sure you check the 'No sublocation check' indicator. This means that ATP just looks only at the location (In APO, a location is the equiv of an R/3 plant). System will confirm the sales order against available product contained in all storage locations.
Have you tried this?
Rgds,
DB49

HU in multiple storage location

Similar Messages

Maybe you are looking for