Inspected stock posting to multiple storage location without batch

Hi,
At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
Quick response will be appreciated.
Anandkumar KS

The scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use.  You obviously aren't using the 553 movement type as that writes off the material.  That could give you two lines to use for your scraping.  I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today.  If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
You can also change the displayed names of the stock posting lines.  That's explained in the config file as well.
Craig

Similar Messages

  • How to restrict Stock posting in Specific Storage Location

    We Want to restrict posting of cenvet creadit taken material to specific storage loacation at time of GRN (MVT 105)

    HI
    IMaterial master view in mrp-2 view there is option to procurement for EP. here you specify the storage location so while posting the GR system pick the same sto location.
    which material you want to post just make the changes in mmr.
    creation of user wise authorization  also you can reach this with help of basis.
    laxman

  • Stock determination with multiple storage locations

    Dear Friends,
    Kindly suggest how to do the following configuration in Stock
    Determination.
    The scenario is
    For example Unrestricted Stock existing for material " X":
    Plant 4000: 10 Qty
    Sloc1 -- 6 qty
    Sloc2 -- 4 qty
    There is sales order (only plant is specified in Sales Order, No sloc) for 7 Pcs when the stock determination process is carried out it is showing the stock available is 10 qty. But when they make the PGI it is picking only 6, ie., from SLOC1, but it is not picking the balance 1 qty from SLOC2 even
    though the material is available.
    The same problem exists for Production order also.
    Thanks,
    Regards.
    Krishnan.

    Hi Hari...
    Make sure you have maintained the priority for sorting & the item table for the same.
    Also in the No.Splits ( number of splits ) give a maximum possible value like 999.
    The problem happening in ur case is, i think this fiels in blank in configuration . So system is stoping the quantity spliting, which will look for the series of S.Locns till the target quantity is reached.
    Reward points if useful/solved.
    Thanks
    Mahesh

  • Stock on posting date -storage location and batch wise

    Dear All
    I need to developa report exactly same as MB5B but with storage location and batch wise.
    We need  storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
    I have gone through some history tables like MCHBH and MBEWH.
    But all the history tables are having fileds for period wise but not date wise.
    Any focus on this?

    You have to read the coding of MB5B to see how SAP is doing it.
    The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

  • One Shipping Point for Multiple Storage Location

    Hi
    How to ship a sales order from Multiple storage location.The system is not accepting .Can any one tell us the missing portion ?
    Thanks

    We want to assign Shipping Point to Multiple Storage Location.It is all batch Managed ..The Material will available in two or three location.We don't want the stock to move to shipping location.We want to confirm at the time of creating sales order with the available location to one shipping point

  • MF60 Multiple Storage Location Check

    Hi Friends,
    Could someone please tell me if it is possible for the Pull List (MF60) to look at multiple storage locations (say a staging location and a stock room)? If it possible then what config do I need to do?
    I would really appreciate your help. Thanks
    Regards,
    JP

    Hi Mahesh,
    I have tried that already but I faced the following problems:
    1) If there is a storage location assigned to the Material then when I run MF60 it only checks for the Material in the specified storage location even though I might have defined the stock determination strategy and defined the sequence for two storage locations in it.
    2) if I dont assign any storage location to the material (in the marerial master, BOM or routing) then when I run MF60 it doesn't come up with anything even though I have defined the stock determination strategy and defined the sequence for two storage locations in it. My production order doesn't show an issue storage location for the components but in this case if I do a order confirmation, then it uses the stock determination strategy to issue the component using the sequence defined
    I hope I have explained these problems clearly but please let me know if you need any further information. I really appreciate your help.
    Thanks,
    JP

  • Stock transfer between Plant/Storage location to Plant/Storage location

    Dear Experts,
    This is a MM component of SAP Retail.
    We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
    To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
    When we run replenishment  planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
    I do see the following set up in SPRO and I have done the following.
    Step1: Activate Stock Transfer between Storage Locations
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
    Step2: Assign Delivery Type and checking rule according to storage
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
    Step3: Define Shipping Data for Stock Transfer between Storage Locations
    SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations

    Step4: Define Rule for Determination off Shipping Point
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
    Step5: Shipping Point Assignment According to Storage Location
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
    Question.No:1- After completing the above set up  in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
    Question.No:2
    I do see the following setting.
    Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
    Display the IMPLEMENTATION
    Double click on the method GET_SUPPLYING_SL
    Click the Execute button
    Click the detail button on IF_EX_MD_EXT_SUP
    Execute GET_SUPPLYING_SL
    There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
    Kindly provide your inputs.
    Thanks,
    Vasanthan

    Dear,
    Have You configure MRP in second plant (where you want to transport the Material).
    Please try with this and do again Po for stock transport.
    Regards
    Piyush Patel

  • HU in multiple storage location

    Can HU resided in multiple storage location?? I'd like to know if it's possible to transfer partial qty of an HU into multiple storage location with the same plant/whse. Here is the scenario:
    HU1234 has 100pcs in plant ABC 0001 whse 011 bin aa-001-c
    Is the below possible or would I need to have unique HU ids for the other three HUs.
    HU1234 25pc in plant plant ABC 0001 whse 011 bin aa-001-c
    HU1234 25pc in plant plant ABC 0002 whse 011 bin aa-001-c
    HU1234 25pc in plant plant ABC 0003 whse 011 bin aa-001-c
    HU1234 25pc in plant plant ABC 0004 whse 011 bin aa-001-c

    I also think I need to separte HUs but I just making sure I'm not missing something.
    The business scenario is that we want to create a plant w/ mulitple storage location to move inventory in and out for specific key customers "Geo Hub" we are trying to avoid having to handle the HU and limit physical movement until we actually need to ship it out on an Outbound DN.
    I know in our current enviroment we can only transfer a full HU via HUMO and if we want to transfer a partial HU we move it to repack and split it.

  • Stock Transfer between 2 Storage locations

    Dear All
    I want to configure Stock Transfer between 2 Storage locations.
    I have activated the same in configuration but can anybody provoide complete details at to how the process happens.Is there any standard document type to be used like UB in case of stock tranasfer between plants,do we craete SD Delivery etc.
    Regards
    Vaibhav Mahajan
    Edited by: Csaba Szommer on Aug 22, 2011 12:56 PM

    Hi
    Stock Transfer between 2 Storage locations,there is no seperate configuration needed( like stock transport order b/w plants  doc type UB), just goto MIGO
    There are 2 options are there for Stock Transfer between 2 Storage locations
    1. one step procedure movement type 311(from unrestricted to unrestricted)
                                                                   323(from quality to quality)
                                                                   325(from blocked to blocked)
    2. Two step procedure movement type 313 and 315(only possible from unrestricted to unrestricted stock)
    During this transfer no accounting document will generate because you are transferrring the stock within the plant,
    Thanks

  • Storage location,Stocktype,Batch no for 2lis_03_um

    hi experts,
    We have recently extracted Inventory Data from ECC to BW System, and client was reconciling the data in 0IC_C03.
    we have extracted from 2lis_03_bx,2lis_03_bf and 2lis_03_um.
    and for the Valuations which 2LIS_03_UM-->0IC_C03  client is saying that there is no Storage Location, Stocktype, Batch number.There is no "storage location" for valuations, this means that if you search on a storage location you will miss price changes. so we need storage location to be filled out in the cube.
    The same goes for batch number, stock type and Base Unit of measure.
    What is the solution to achieve this? Last month only we have initialized the data and delta loads are happening everyday.
    instead of enhancing the data source can we change in the Transformations level to get Storage location,Stocktype,Batch number and 0BASE_UOM.
    if i have to enhance the data source do i need to take downtime and Initialize the delta again.
    please provide me the solution..
    eXPERTS any updates plz
    regards
    venuscm
    Edited by: venugopal vadlamudi on Oct 14, 2010 6:20 AM

    Note 589024 - Reports in BW with storage location and stock type chars.

  • Link between storage location and batch number to retrive the salk3 field

    HI,
    In my report i need to give the output as follows
    For each lgort with related batch number we need to get the salk3.So i need to get a link between lgort , batch number to retrive the salk3.can any one give the tables from which i can get the link and retrive the data.
    note: My report output should look like the fields lgort batch  and unrestriced value of stock in tcode mb52.
    subhashini.
    Edited by: subhashinikb on Apr 1, 2011 9:38 PM

    Hi,
    In 2 steps, u can get the unrestricted stock value.
    step1: Get material no (MATNR), plant (WERKS), batch (CHARG) and unrestricted stock (CLABS) from table MCHB by sending Storage location and batch number.
    Step2: Get standard price STPRS from table MBEW based on condition where MATNR = MCHB-MATNR, BWKEY = MCHB-WERKS and BWTAR = MCHB-CHARG.
             unrestricted value in MB52 will be (MCHB-STPRS) * (MCHB-CLABS).

  • Releasing GR Blocked Stock to any unrestricted storage location

    We have some stocks in non-valuated GR blocked stock which was posted from Purchase Order with movement type 103
    Now, the decision is to dispose the material. We have dedicated scrap location in system. Before disposing physically the material need to be cleared from system under GR blocked stock, even though it does not appear in any storage location in SAP
    Our Material Planning suggested that stores shall post release of GR blocked stock with movement type 104 so it will reverse the 103 movement previously, and clear the qty from system. But this in my opinion is against control viewpoint..i.e. stores should not use this way to clear system assigned stock to clear from system
    My suggestion was to use the following steps :
    1. MIGO>> Release GR blocked stock
    2. Put Material Document number (while posting 103), material details, qty, other references will be retrieved automatically
    3. The movement type is seen to be default as 105, change it to 910 (Release GR blocked stock for warehouse)
    4. Change Stock type from QM inspection to Unrestricted
    5. Assign Storage location to desired one (in my case I assigned SCRAP location)
    5. Select Item OK indicator to activate
    6. Check & Post
    Since the item has PO reference, my question to my expert friends is that will the above release from GR blocked stock post qty only to SCRP location or will it post Qty + value ?????
    I don't want Value to be posted to the scrap location.
    If the above process to move the stock qty (only) from GR Blocked stock to Scrap is success, I can ask accounts to post adjustment to clear scrap qty by 702 movement type.
    Thanks, Sunil

    Just set this que is complete so no one will try to open

  • Stock valuation down to Storage location level

    Dear all,
    System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
    Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
    For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
    Could you please comment if there are tables store these data? Kindly comment.

    Hi Afshad Irani,
    Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
    My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
    Could you please advice further?

  • Stock Transport Order - Issuing Storage Location

    Hi gurus -
    When raising a Stock Transport Order (UB type) and Issuing Storage Location is populated manually with an SLoc not extended for material in supplying plant, will system give an error or allow STO to be saved/created without throwing an error?
    Thanks,
    Karen

    Hey Karen!
    I am not sure if I understand your problem correctly.
    You do not want the system to create a new MARD entry when postin goods issue.
    You can enable/ disable this function with transaction OMB3 in the customizing.
    have fun
    Flo

  • Stock determination finds deleted storage location

    Hello gurus,
    we are using stock determination in MIGO for goods receipts to automatically determine the correct storage location for delivered goods.
    Now we deleted one storage location and moved all materials stored there to another one.
    But still, for certain materials, the stock determination gives the old location. Then, when we try to post the receipt, there is (of course) an error because the storage location has been deleted.
    We use only one very simple stock determination strategy with just one item:
    Special stock indicator: F (unrestricted-use stock)
    Priority indicator: 1
    Any ideas, why the old location could be found?
    Thanks
    Alicia

    Hi Jürgen,
    no, I did not remove that item, because it was not even there in the first place.
    As I wrote in my OP, there is only one item with
    Special stock indicator: F (unrestricted-use stock)
    Priority indicator: 1
    The storage location is blank!
    I never used stock determination before and I know it is normally used for goods issue only, but in this system, there definately is an button called "stock determination" in MIGO for goods receipts. And when I click on it, the system determines a storage location where the material is stored. This works perfectly, except for the materials with blocked locations.
    Alicia

Maybe you are looking for