HyperV Virtual NIC not Visable on SCVMM

HI I have installed Hyper V On One of the HP G7 hardware , and SCVMM is on G6 Hardware,
After configuring Hyper V Role, I have teamed the 4 NIC to One Teaming and created multiple VnNIC by using below Script.
Issue here After adding the Host to SCVMM i am unable to find the VNICs, I can see only Vswitch, Please suggest, I have attache3d the screenshot for the references.
New-NetLbfoTeam -Name TEAMNIC -TeamMembers NIC1,NIC2,NIC3,NIC4 -LoadBalancingAlgorithm HyperVPort -TeamingMode SwitchIndependent
New-VMSwitch -Name VSWITCH -NetAdapterName TEAMNIC -AllowManagementOS $False -MinimumBandwidthMode Weight
Set-VMSwitch VSWITCH -DefaultFlowMinimumBandwidthWeight 20
Add-VMNetworkAdapter -ManagementOS -Name "Management" -SwitchName "VSWITCH"
Add-VMNetworkAdapter -ManagementOS -Name "LiveMigration" -SwitchName "VSWITCH"
Add-VMNetworkAdapter -ManagementOS -Name "VirtualMachine" -SwitchName "VSWITCH"
Add-VMNetworkAdapter -ManagementOS -Name "CLuster" -SwitchName "VSWITCH"VSWITCH
Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "Management" -Access -VlanId 251
Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "LiveMigration" -Access -VlanId 62
Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "VirtualMachine" -Access -VlanId 62
Set-VMNetworkAdapter -ManagementOS -Name "Management" -MinimumBandwidthWeight 10
Set-VMNetworkAdapter -ManagementOS -Name "VirtualMachine" -MinimumBandwidthWeight 50
Set-VMNetworkAdapter -ManagementOS -Name "LiveMigration" -MinimumBandwidthWeight 30

The fact that this does not show up in SCVMM properly makes this an SCVMM issue.
And, SCVMM does not support everything that you can do with Hyper-V.
In this case, SCVMM needs to drive the configuration using Logical Networks and apply this configuration when you host is taken under management.  Only then will SCVMM identify and list everything properly.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Similar Messages

  • When setting up converged network in VMM cluster and live migration virtual nics not working

    Hello Everyone,
    I am having issues setting up converged network in VMM.  I have been working with MS engineers to no avail.  I am very surprised with the expertise of the MS engineers.  They had no idea what a converged network even was.  I had way more
    experience then these guys and they said there was no escalation track so I am posting here in hopes of getting some assistance.
    Everyone including our consultants says my setup is correct. 
    What I want to do:
    I have servers with 5 nics and want to use 3 of the nics for a team and then configure cluster, live migration and host management as virtual network adapters.  I have created all my logical networks, port profile with the uplink defined as team and
    networks selected.  Created logical switch and associated portprofle.  When I deploy logical switch and create virtual network adapters the logical switch works for VMs and my management nic works as well.  Problem is that the cluster and live
    migration virtual nics do not work.  The correct Vlans get pulled in for the corresponding networks and If I run get-vmnetworkadaptervlan it shows cluster and live migration in vlans 14 and 15 which is correct.  However nics do not work at all.
    I finally decided to do this via the host in powershell and everything works fine which means this is definitely an issue with VMM.  I then imported host into VMM again but now I cannot use any of the objects I created and VMM and have to use standard
    switch.
    I am really losing faith in VMM fast. 
    Hosts are 2012 R2 and VMM is 2012 R2 all fresh builds with latest drivers
    Thanks

    Have you checked our whitepaper http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a for how to configure this through VMM?
    Are you using static IP address assignment for those vNICs?
    Are you sure your are teaming the correct physical adapters where the VLANs are trunked through the connected ports?
    Note; if you create the teaming configuration outside of VMM, and then import the hosts to VMM, then VMM will not recognize the configuration. 
    The details should be all in this whitepaper.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • Differences between VMware virtual switches and HyperV virtual switches

    Hello,
    I've deployed an OpenVpn infrastructure (configured in bridging mode) within a VMmare ESX4 environment.
    The scenario is this:
    A remote client connects to the OpenVpn server (VM1), VM1 also owns an interface where traffic passes in tagged mode complaint to vlan 8021q, VM2 owns a interface on the vlan10. VM1 can ping VM2 without any problem (supposing vlan 10 traffic), but the remote
    client cannot ping VM2.
    The scenario works perfectly in a physical environment (without any virtual machine).
    The scenario is like this:
    Analizing traffic with Wireshark on the VM2 I've noticed that an ARP request leaves from the remote client MAC to the destination host interface of VM2 (broadcast ARP request).
    The host VM2 sends an ARP reply directly to the MAC address of the remote client.
    This last packet doesn't pass the vSwitch, so it isn't received by the remote client and the ping fails.
    This occurs because the VMware ESX vSwitch only knows all the MACs of virtual machines within the ESX environment, it doesn't learn MAC addresses like a physical real switch and it discards packets sent to unknown unicast MAC addresses (broadcast traffic instead
    is passed). Within the VMware infrastructure this is solvable only by using of the Promiscuos mode feature of the virtual switch port.
    I would like to ask if HyperV virtual switches work like VMware ESX virtual switches. So in Hyper-V virtual switches do learn mac addresses actually like a physical switch?

    This last packet doesn't pass the vSwitch, so it isn't received by the remote client and the ping fails. This occurs because the VMware ESX vSwitch only knows all the MACs of virtual machines within the ESX environment, it doesn't learn MAC addresses
    like a physical real switch and it discards packets sent to unknown unicast MAC addresses (broadcast traffic instead is passed). Within the VMware infrastructure this is solvable only by using of the Promiscuos mode feature of the virtual switch port.
    Thank you; I did the same in Wireshark and noticed the ARP reply was not being received by my VMware guest Hyper-V host, so I did an Internet search and found this document at the top of the list. For other people that came here because their VMware guest
    Hyper-V lab server's SCVMM 2012 SP1 logical switch virtual network adapter combination could not ping other VMware guests; In addition to "Accept" for your VMware vSwitch (described above), you will need to change your VM Network VLAN ID to "All".

  • Trouble getting virtual NICs to appear in VM

    Hi all. We have the latest release of HyperV running on fully patched Windows 2008 host machine. We have 3 physical dual port NICs in the machine and we are having trouble creating virtual networks and having them show inside a guest VM.
    Our guest VM is running Windows 2003 Web, SP2. No network adapters show up under Control Panel -> network connections
    In device manager I notice a yellow exclamation under Other Devices. The details for this are as follows:
    Unknown Device - Location: on Intel 82371AB/EB PCI to ISA bridge (ISA)
    The drivers for this device are not installed.
    Details: Value - ACPI\VMBUS\4&4B018EB&0
    Here are the steps we took to create the virtual network:
    1) Open Virtual Network Manager
    2) Click Add on "External" virtual network
    3) Select Intel Pro/1000 PT Dual Port Server Adapter (unused on host machine, but cable is plugged in) - External
    4) Click OK to create virtual network
    5) Go to Settings of VM and click Network Adapter
    6) Select the virtual network we just created under Network: in Settings
    7) Configure IP address etc on new VIRTUAL nic created on host machine. I have confirmed Hyper-V removed all checkboxes under properties of the physical NIC minus Microsoft Virtual Network Switch Protocol
    Does anyone know what I am doing wrong? Is there some sort of driver/patch I am missing? Any help would be much appreciated!

    I should have stated;
    Windows Server 2003 x86 SE built on VS 2005 R2 sp1, transferred to Server 2008 with hyper V installed, upgraded to SP2. Integration Services setup disk has been run. Mouse control is in and running. Still no NIC drivers.
    System built on 2008 Vhost with SE sp0 and upgraded works. I hadn't installed the integration disk. My bad.
    So is there nic drivers available or not? The biggest business requirement for virtualization is to save on all the testbed workstations and servers. These run things like Windows 2000 server and workstation, Windows XP, server 2003 sp0. Various testing levels for compatibility with clients. Without this driver natively there seems to be no way forward for the company infrastructure.
    meep.

  • Find out virtual nic to physical nic mapping

    any command in hyper-v / scvmm to find out virtual nic to physical nic mapping. In vmware we can get the same by esxtop N view shows VMname and the physical NIC used, simlarly any in hyper-v

    I think that in a device driver you can use hat_getkpfnum(9F) to get the physical page number from a virtual address.
    In crash(1m) the vtop command will translate a virtual to a physical address.
    I would have thought you could also just use the virtual address against /dev/kmem, as opposed to using a physical address against /dev/mem?
    Hope that helps.
    Ralph
    SUN DTS

  • Tables and views not visable in diagram organiser

    HI
    Opened my SSAS project and the tables are not visable in the Diagram Organiser.
    When I right click on the pane and show all tables get :
    Error HRESULT E_FAIL has been returned from a call to COM component
    Then the tables appear without there relationships.
    Cube still processes etc.
    Any help please ?
    BTW Just installed this on a new PC build.
    Version:
    11.0.3436.0
    File Name:
    SSDTBI_VS2012_x86_ENU.exe
    Date Published:
    26/06/2014
    File Size:
    784.0 MB

    Hi Bifool,
    According to your description, the issue was solved when open this project in Visual Studio 2013, right?
    SQL Server Data Tools – Business Intelligence for Visual Studio 2013 (SSDT BI) for SQL Server 2014. So when you open this project in VS 2013, the project was upgraded to SQL Server
    2014 version automatically which might solve this issue.
    Besides, for the error
    Error HRESULT E_FAIL has been returned from a call to COM component
    It seems that it's a known issue, please refer to the links below.
    https://connect.microsoft.com/SQLServer/feedback/details/484146/getting-an-error-when-trying-to-browse-a-cube
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/58a07890-52f6-4adc-8cdd-bbfcb30e87c6/browsing-a-cube-error-hresult-efail-has-been-returned-from-a-call-to-a-com-component-microsoft?forum=sqlanalysisservices
    Hope this helps.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • When Closing the window giving error " Virtual Column not allowed"

    Hi All,
    In my main block, i have a button, on clicking which will open a new window(block) with a free text field to enter.
    I have a Save button in a new window which will save entered text fiedl and refresh the main block to see the value entered in a new block.
    But suppose, if entered something in text field and without saving if i close the window and try to exit from the form
    It is asking me to save the form or not and if i press Yes
    Then it gives me below error
    ORA-01733: virtual column not allowed here
    FRM-40508: ORACLE error: unable to INSERT record.
    If i see from Display database error' It is trying to insert the record into the view On which my new block has based( i know it is not possible).
    Any suggestion on this please?
    Thanks,
    pavan

    Pavan,
    How are you populating your block? It sounds like you are populating the block manually (eg; Looping through a cursor and assigning values to each row of your block). If this is what you are doing, then YES you will get these kinds of errors. Ideally, you should base your data block on your data (either directly on the base table or view of if you are using a query, then a FROM Clause based block).
    I'm guessing here, so would you mind posting a description of your data block(s) is/are set up?
    Craig...

  • "Java Virtual Machine not loaded"

    I get this message every time I boot up. It just started recently. Anyone know how to fix that? Everything seems to run okay, but that annoying box pops up every time.
    "Java Virtual Machine not loaded"
    Thanks in advance.
    kar

    To state the obvious:
    1 - Install JAVA
    2 - Java is installed: change your PATH vaialbe to point to the folder with JAVA.EXE in it.
    3 - check to be sure your CLASSPATH variable is correct -- this will not give you the error you describe, but it will make other things very anoying.
    4 - If everything in 1-3 look good, then uninstall, delete any remaining JAVA folders and reboot (cold boot), and then re-install JAVA and pay attention to any errors that may be generated (It sounds like something messed up your install before).

  • Files with accented / special characters dissapear / not visable

    I did everything which was suggested in threath http://discussions.apple.com/thread.jspa?threadID=875688&threadrate=2&messageid= 4170111#4170111 but have another problem which maybe new:
    All the files appeared when I first used the USB HD on my Airport Extreme but a few weeks ago I tried to play a song via my Itunes and suddenly all my files containing special characters or accented characters where not recognized anymore. For example "josé gonzales - heartbeat.mp3" was gone...! Also in Finder.
    I connected my harddrive to directlly to my mac and all the files we visable again! I did the account trick with password and moved all the files in the sharedfolder but still alle the files with accented characters where not visable??? I can't seem to find a solution? Does anyone got the same problem?
    Qryn

    Actually, The inso filters do not even work for me for PDF file versions 1.2+. Is anyone else experiencing the same difficulties ? How often does Oracle update the INSO filters to keep up with vendors (Adobe/Microsoft) coming out with newer versions of their document products ?
    null

  • I created a new Itunes playlist and when I synch my phone it is not visable as a playlist on my phone (Iphone 6), but it does appear on my computeras a playlist on my phone.  How can I get it to be visable on my phone?

    I created a new Itunes playlist and when I synch my phone it is not visable as a playlist on my phone (Iphone 6), but it does appear on my computer as a playlist on my phone.  How can I get it to be visable on my phone?

    Hi,
    It sounds like there may be some disconnect between the phone and the computer.  Could be a number of things going on, but one way I've been able to fix this issue on several occasions is by completely removing all of the music from the iPhone (Settings > General > Usage > Storage > Manage Storage > Music > swipe 'All Songs' to the left and tap 'Delete') and then re-syncing it from iTunes all at once.  Be sure to disconnect your phone from the computer and close iTunes first.  Keep in mind that any songs that are on the phone but are NOT in the iTunes library will not be synced over after you delete them from the phone.  If the songs on the phone were purchased from the iTunes Store you can transfer them to the computer's iTunes library by connecting the phone to iTunes then selecting File > Devices > Transfer Purchases from [user's] iPhone.
    After deleting all songs from the phone, go back into Settings and check the music storage again to make sure everything was deleted.  If the 'Music' app is not listed anymore, then you should be good to go.  Just to be sure, you can also check the Music app itself and make sure no songs appear there (if songs appear with cloud icons next to them, turn off 'Show All Songs' in Settings > Music and then check the Music app again -- no songs should appear).
    Once you're absolutely sure all songs have been removed from the phone, restart the iPhone, plug it back into the computer, and let iTunes sync.  Give it time to sync everything over at once and make sure the sync doesn't get interrupted.  Everything you've set to sync should sync over properly.
    If it still doesn't sync, there may be a corrupted file in the iOS installation on the phone or in the iTunes installation on the computer.  It's more likely that the issue is in the phone's software, especially if you ever installed an iOS update over Wi-Fi (through the Settings app).  I'd recommend making an iTunes backup and restoring the phone to factory settings through iTunes.  Then set the iPhone up as a new iPhone and test the syncing -- the playlist should sync over properly.  If not, Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support.  Then test again.
    Once you get the syncing working with the phone set up as new, restore the phone from your iTunes backup and test the syncing again.  Now that the iOS files have been reinstalled, hopefully the corruption is gone!  If it still doesn't sync properly, the corruption may be somewhere else (in a song in the playlist, in some app data in the backup, etc.).  That could be harder to pinpoint, but don't worry about that for now.  Start simple.
    Good luck!

  • Create Virtual NICs of a Teamed Interface

    Dear All,
                I am building a Hyper-V Failover Cluster.  I have created a team (two physical nics) which I plan to only use for Cluster Communication, Heartbeat and Live Migration. 
    I have following questions:
    1.  How to create virtual NICs out of this teamed interface and assign them to respective networks?
    2.  Do Cluster Communication, Heartbeat and Live Migration Networks have to be on different subnet or they can be part of the same subnet as well?
    3.  In both cases that is same subnet or different subnet, how would networks be assigned?
    Thanks in advance.

    Hi Junkie,
    Hope the following link is helpful :
    http://technet.microsoft.com/en-us/library/dn550728.aspx
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • ORA-01733- virtual column not allowed here  - Insert using inline view

    Does anyone know why I am getting ORA-01733- virtual column not allowed here
    SQL> select * from v$version;
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    PL/SQL Release 11.1.0.6.0 - Production
    CORE 11.1.0.6.0 Production
    TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
    NLSRTL Version 11.1.0.6.0 - Production
    ---no error without WITH CHECK option
    SQL> INSERT INTO
    2 (SELECT
    3 location_id,
    4 city,
    5 l.country_id
    6 FROM countries c, locations l,regions r
    7 where l.country_id = c.country_id
    8 and r.region_id=c.region_id
    9 and r.region_name = 'Asia')
    10 VALUES (5500, 'Wansdworth Common', 'UK');
    1 row created.
    SQL> rollback;
    Rollback complete.
    -----error with WITH CHECK OPTION
    SQL> INSERT INTO
    2 (SELECT
    3 location_id,
    4 city,
    5 l.country_id
    6 FROM countries c, locations l,regions r
    7 where l.country_id = c.country_id
    8 and r.region_id=c.region_id
    9 and r.region_name = 'Asia' WITH CHECK OPTION)
    10 VALUES (5500, 'Wansdworth Common', 'UK');
    INSERT INTO
    ERROR at line 1:
    ORA-01733: virtual column not allowed here
    I was expecting
    ORA-01402: view WITH CHECK OPTION where-clause violation
    for the second one. Is there anything I am missing here ?

    Randolf
    Thank you very much for the update to this old question
    After reading the link I think I should ignore this error and accept it as ORA-01402
    The information you asked me to check did not lead me an understanding of different error types.
    SQL> ----view for ORA-01733
    SQL> create view test_v_1
      2  as
      3  SELECT
      4  location_id,
      5  city,
      6  l.country_id
      7  FROM countries c, locations l,regions r
      8  where l.country_id = c.country_id
      9  and r.region_id=c.region_id
    10  and r.region_name = 'Asia' WITH CHECK OPTION;
    View created.
    SQL>
    SQL>
    SQL>
    SQL> select * from user_updatable_columns where table_name='TEST_V_1';
    OWNER                          TABLE_NAME                     COLUMN_NAME                    UPD INS DEL
    HR                             TEST_V_1                       CITY                           YES YES YES
    HR                             TEST_V_1                       COUNTRY_ID                     NO  NO  NO
    HR                             TEST_V_1                       LOCATION_ID                    YES YES YES
    SQL>
    SQL> ----view for ORA-01402
    SQL>
    SQL> create view test_v_2
      2  as
      3  SELECT
      4  d.department_id,
      5  d.department_name,
      6  d.location_id
      7  FROM hr.departments d,hr.locations l
      8  WHERE l.location_id=d.location_id
      9  and d.location_id < 2000
    10  WITH CHECK OPTION;
    View created.
    SQL>
    SQL> select * from user_updatable_columns where table_name='TEST_V_2';
    OWNER                          TABLE_NAME                     COLUMN_NAME                    UPD INS DEL
    HR                             TEST_V_2                       DEPARTMENT_ID                  YES YES YES
    HR                             TEST_V_2                       DEPARTMENT_NAME                YES YES YES
    HR                             TEST_V_2                       LOCATION_ID                    NO  NO  NO
    SQL>
    SQL>
    SQL> ----INSERT STILL FAILING WITH DIFFERENT ERROR DESPITE THE SAME UPDATABLE COLUMN STRUCTURE
    SQL> insert into test_v_1 values  (5500, 'Wansdworth Common', 'UK');
    insert into test_v_1 values  (5500, 'Wansdworth Common', 'UK')
    ERROR at line 1:
    ORA-01733: virtual column not allowed here
    SQL> insert into test_v_2 values  (9999, 'Entertainment', 2500);
    insert into test_v_2 values  (9999, 'Entertainment', 2500)
    ERROR at line 1:
    ORA-01402: view WITH CHECK OPTION where-clause violation
    SQL>A. Coskan GUNDOGAR
    Oracle DBA
    http://coskan.wordpress.com
    “A man's errors are his portals of discovery.”
    James Joyce

  • Virtual Column not allowed here Error

    Hi All,
    I am facing "Virtual Column not allowed here" Error when running a simple select statement. I have identified that if I am removing a primary key constraint and an index on top of month table which is used in the SQL solving this issue. But want to know the exact reason of this error. FYI I am having two indexes on Month_end_date_key (which is also a primary key) and Month_end_date. Could you please let me know the reason for this.
    FYI I am not doing any insert,update deletion operations. I am using only the tables in the SQL not using any views.
    Regards,
    Radhakrishna

    924486 wrote:
    Hi All,
    I am facing "Virtual Column not allowed here" Error when running a simple select statement. I have identified that if I am removing a primary key constraint and an index on top of month table which is used in the SQL solving this issue. But want to know the exact reason of this error. FYI I am having two indexes on Month_end_date_key (which is also a primary key) and Month_end_date. Could you please let me know the reason for this.
    FYI I am not doing any insert,update deletion operations. I am using only the tables in the SQL not using any views.
    Regards,
    RadhakrishnaAre you sure none of those is a view?
    Cause:     An attempt was made to use an INSERT, UPDATE, or DELETE statement on an expression in a view.
    Action:     INSERT, UPDATE, or DELETE data in the base tables, instead of the view.

  • Files in NFS share not visable

    I'm trying to install Solaris 10u4 from a Netra T1-200 install server. The client is a Sun Enterprise 5000, it boots fine during the network install but gives the error "The directory you specified doen not contain a valid Solaris OS image".
    If I mount the same NFS share from a Linux box I can see all the files in the Boot directory but there are no files visable in the Tools or Solaris_10 directory. I've verified that they exist on the Netra but the are not visable in the share.
    Any help in resolving this problem would be greatly appreciated.
    Thanks,
    Jack

    OK, i can replicate it by doing the following on the server:
    <pre>
    # touch test\ file\ one.txt
    # touch test\ file\ one\ two.txt
    # touch test\ file\ one\ two\ three.txt
    # touch test\ file\ one\ two\ three\ four.txt
    # touch test\ file\ one\ two\ three\ four\ five.txt
    </pre>
    the last two files (ending in four and five) do not appear in finder.
    It seems that if there are 5 or more spaces in a filename the file will not appear.
    This seems like a bug doesn't it? how would I go about reporting it to apple?
    Thanks
    ed

  • Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.

    I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385.  The .NET framework version is 4.0.30319.  I've setup an application pool and copied the wwwroot directory. 
    I've checked for nested web.config files and I've been reading a lot about converting the site to an application.  The older server running the application is still up and running and the configurations look identical.  If I convert the site to an
    application the icon changes and doesn't look like it does on the old server.  I'm new and still learning the basics of programming and publishing applications.  Can someone point me in the right direction?  I've been on google for a few days
    to no avail.  Thanks.
    Description:
    An error occurred during the processing of a configuration file required to
    service this request. Please review the specific error details below and modify
    your configuration file appropriately.
    Parser Error Message: It
    is an error to use a section registered as
    allowDefinition='MachineToApplication' beyond application level.  This error can
    be caused by a virtual directory not being configured as an application in IIS.
    Line 20:       <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
    Line 21:     </httpHandlers>
    Line 22:     <authentication mode="Forms">
    Line 23:       <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
    Line 24:     </authentication>

    Hi,
    I agree with Tim that we can ask for better help in the following IIS forum.
    IIS.NET forum
    http://forums.iis.net/
    Best regards,
    Frank Shen

Maybe you are looking for