I Always Get Error 3014!

I have an iPhone 3GS, and I restored it to get a bunch of junk I don't even know about off, and I put it in Recovery Mode, but when I tried to restore I made sure to use the right firmware, I even held Shift and clicked restore, and chose the updated 4.1 firmware in the Apple Computer folder in Appdata, and stuff. Whenever I tried to restore it kept saying I had Error 3014, and I click the More Information button, but it takes me to the Apple site for error 3014, and it has no information at all! I'm kinda frustrated because I really need my phone to communicate mostly with my parents.. please help me fast if you can!

That's the page I saw with no information on it..
From that kb article:
+"Error 3000-3999: (3002, 3004, 3013, 3014, 3164, 3194, and so on) Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. *Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again*."+
I've already done them all..
Really? There are lots and lots of steps and suggestions...
Message was edited by: modular747

Similar Messages

  • Can't get iPhone 4s out of recovery mode and always get error 40 during restore

    I tried updating to ios 6.1.2 and I left it for a while since I had to do some stuff. When I came back, my iPhone is in recovery mode and I can't get it to restore using itunes. I always get error 40. I tried restoring on a different pc but it's still a no go. Is it possible that this has something to do with the hardware? I've already looked up possible solutions but my iphone's still in recovery mode. I never had this phone opened nor did I attempt to jailbreak it or anything. I tried asking my carrier for assistance but they're charging me for repairs. The fee's pretty expensive.

    Read here:
    http://support.apple.com/kb/ts3694#error40
    Usually caused by security software on your computer.

  • Today I tried to update to IOS 8 on my ipad 4. I thought I was doing everything right. I did it through itunes. I backed up before starting. It now is frozen. itunes says it's in recovery mode.get error 3014. HELP!

    Today I tried to update to IOS 8 on my ipad 4. I thought I was doing everything right. I did it through itunes.  I updated iTunes to 11.4.  I backed up before starting. It now is frozen. itunes says it's in recovery mode. The only options it gives me is to Restore so I say ok... after a few seconds  I get get error 3014.  It says this ipad can not be restored.  It has a button to click for more info which leads me to this page:  Error 3194, Error 17, or "This device isn't eligible for the requested build"
    Please help, I have a back up I just can't get to it.  Why did this happen!!!
    HELP!

    I have since tried a few more things... suggestions found online...
    I tried using another computer, same house same internet link though... it downloaded the update again, took about an hour & a half but as soon as it finished it said it could not restore because "device could not be found".  I unplugged my ipad then plugged it back in so it would "see"  it but it just went right back to the "ipad in recovery mode needs to be restored"... then the same error 3014.
    I don't know if the computer can sense the ipad or what's going on.  On the screen when it wants to do the restore it has an icon of an ipad & it says "Serial Number: n/a
    The next thing I tried...  was right clicking iTunes & choosing "Run as Administrator".  It started another hour & a half download of the update... but then when it was done it went right back to the error 3014.
    Is there nothing that can help?!?

  • I always get error opening the file

    I always get error opening the file Deprecated_ServerBehaviorsPanel_Support.zxp. My mistake I have Adobe Extension Manager DW says it requires 13 or later.
    the truth can not be ...
    Greetings juan manuel
    [spam removed by moderator]

    Do you have Extension Manager for CC?
    Adobe - Exchange : Download the Adobe Extension Manager
    You cannot use .ZXP extensions with any other extension manager.
    Nancy O.

  • Unable to update or restore new iPad Mini 2.  Get error 3014 on two different Macs.

    Unable to update or restore new iPad Mini 2.  Get error 3014 on two different Macs.  This is a new out of the box iPad Mini 2. Am on a managed network, but have not had this problem previously.

    First thing to do is make sure you have the latest version of iTunes on your computer.
    This Apple support page will provide more information:
    Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support

  • Signed.applets.codebase_principal_support is set true but I always get error

    signed.applets.codebase_principal_support is set true but I always get error like Error: A script from «https://127.0.0.1:8080 <https://127.0.0.1:8080/> » was denied UniversalXPConnect privileges.
    On linux it works well.
    May be I need to change something else ?

    Possibly the consequence of this bug fix.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=546848 bug 546848] - Remove support for enablePrivilege
    <i>([https://bugzilla.mozilla.org/page.cgi?id=etiquette.html please do not comment in bug reports])</i>

  • Palm Tungsten E2 software will not load, I always get error 2738.

    HP Pavilion  dv7-135nr laptop with AMD Turion X2 processor at 64kbs running Vista
    When I try to load Palm Tungsten E2 software on my Pavilion Vista lap top, I always get error 2738.

    Hello, and Welcome to the HP Support Community!
    Is your version of Vista 32bit or 64bit?
    If 64bit, have you installed the Aceeca drivers?
    http://h30434.www3.hp.com/t5/Palm-OS-WinMo-Hardware-and-Software/64-Bit-Windows7-8-8-1-USB-drivers-f...
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Itunes will not start, always get error message

    I had to reinstall Itunes and ever since I always get an error message stating "Itunes has encountered a problem and must be restarted" I have tried to restart computer, uninstall every Itunes thing several times, updated to newest Itunes program with out any luck. I have run virus scans, spyware scans and still nothing. The only thing that appears with error message is option to debug but that also does nothing.

    Have you went here and installed "Quicktime WITHOUT iTUnes" making sure antivirus is disabled? http://www.apple.com/quicktime/download/win.html

  • One Application deployed OK;  my app always gets error "404 Not Found"...

    I am trying deploying my application from within JDeveloper 10.1.3.4 to the standalone oc4j on the localhost, before deploying it on an application server. I am a newbie and I am doing this by following a tutorial. The tutorial application is deployed fine, but my application always gets the "404 Not Found" error after deployment.
    The standalone oc4j is set up on my Windows XP PC by running the <jdev_home>\jdev\bin\start_oc4j.bat file, and works fine because the tutorial application is deployed and runs fine.
    For the tutorial application, deployment is the last chapter (Chapter 10). I started from the nearly completed tutorial application from the end of Chapter 9, and went throug all the steps in Chapter 10 and the application is deployed and invoked successfully.
    My application starts with the login.jspx page. The applilcation runs perfectly when invoked directly within JDeveloper by right-clicking login.jspx and selecting Run. But when going through the same steps as with the tutorial application, my application always gets "404 Not Found" in the browser.
    The steps of deployment are:
    1. Right-click the ViewController project, select New and then Deployment Profiles/WAR File, to create the deployment profile. When creating this profile, I entered "ZBV" as the custom root context.
    2. Right-click the deployment profile (ZBV.deploy), and "Deploy To..." the standalone oc4j on the localhost, and accept the default configuration. The messages in the log window in JDeveloper are all clean without error.
    3. Open a browser, enter the url "http://localhost:8888/ZBV/faces/staff/login.jspx and get "404 Not Found". I have undeployed and gone through the same steps several times and always got the same error. I use /staff/login.jspx after ZBV/faces because in the Application Navigator, the login.jspx file is located in the ViewController/Web Content/staff folder.
    I wonder what could be wrong with my application. In the tutorial it is said that both an .ear file and a .war will be created but only the .war file needs to be created because of the dependency of the ViewController project on the DataModel project set in the application. My application has this dependency set therefore I went throug the same steps as with deploying the tutorial application.
    I hope the experienced and experts and gurus will shed light on me with their experience and wisdom.
    Many thanks!
    Newman

    Hi, Shay,
    You are right. I checked the log and found one notification message:
    Unable to dispatch JSP Page : Exception:java.io.FileNotFoundException: /staff/Login.jspx
    The capital L is a typo when creating the page file. During development you never need to type the file name but just click, and I always thought it was login.jspx. When that is corrected in the url string, the application is invoked and runs as it should. The one letter drove myself crazy for a whole day.
    Sorry and thanks! And to Dom too!
    Regards,
    Newman

  • HT4946 I am getting Error 3014 when trying to restore my iphone 3GS?

    I am updating the operating system on my iphone 3GS, as prompted by itunes.
    I have a screen on the mac saying 'iphone recovery mode'
    I check all the prompts but the phone failts to restore quoting Error 3014. Anyone know what the problem is and how to get over it??
    Thanks!

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart
    so this basically means: turn off your firewalls, virusscanners etc, and try again

  • TS3694 why do i keep getting error 3014 and why is this website never easy to find an answer ?

    i dont understand how i always click on an error that i have and it brings me to an option wich has no relevance to my problem

    To be honest, Google works much better.
    With that being said, error 3014 pops up when iTunes cannot connect to the iOS upgrade servers.  Typically this happens when the servers are either over loaded (similar to what happens during a hacker DOS attack), your local hosts file points to another server (which happens when an iOS device is or has been jail broken), when the servers are off-line, or when you do not have access to the internet.

  • Why I always get error 404 after I deployed war?

              Hi,sir
              I have a problem when I am using weblogic 6.1(sp2). I developed a webapp and packaged
              it into a war file. The process of deployment is no error. But when I want to visit
              the app via IE browser, I always get the error 404. The weblogic server told me as
              following:
              <2002-6-22 &#19979;&#21320;03&#26102;39&#20998;40&#31186;> <Error> <HTTP> <HttpServer(11051039,null
              default ctx,myserver) found no context for "/mw/main/signin". This request does not
              match
              the context path for any installed web applications and there is no default web application
              configured.>
              mw is webapp context root,
              main/signin is mapping name of servlet.
              By the way, I deployed a the example of security in bea's examples directory. Unfortunatelly,
              I met the same result.
              how can i do?
              thx for your response.
              

    It is a database bug (an ORA-0600 almost always is). In this case it is bug# 1725012. You can see the details from MetaLink. There are some patches (by platform) available you should see which may apply to you.

  • Site to Azure replication - always get errors when trying to enable protection for a virtual machine

    I just setup my Azure account with Storage and Azure Site Recovery.
    All the servers are registered and I can see my host server configurations in Azure.
    But as soon as I can try to Enable Protection, after about 10 minutes I always get this error
    Unable to complete the request. Operation on the xxx.xxx.local server timed out.
    Try the operation again. (Provider error code: 2924)
    (But the way the xxx.xxx.local server is the name of the underlying Hyper-V host running SCVMM and my test machine to be protected. Is that the right machine Azure should be communicating with?)
    This happens if I initiate the protection from Azure or from SCVMM.
    The server I want to enable protection for is quite small and there appears to be no problem with my Internet connection.
    Prerequisites check
    Identifying replication target work okay
    And after the failure, Updating Provider states also completes okay
    Would folks have an idea where else I could be looking?
    Thanks

    Hi, can you please check if network proxy settings configured in the Microsoft Azure Recovery Services Agent are correct. This agent running on the Hyper-V host needs to be able to reach Azure. (You can find more details about this here: http://blogs.technet.com/b/virtualization/archive/2014/07/07/azure-site-recovery-authenticated-proxy-server.aspx)
    If that is correct, please look at event logs at “Applications and Services Logs->MicrosoftAzureRecoveryServices->Replication” and
    traces at a location like C:\Program Files\Microsoft Azure Recovery Services Agent\Temp.
    Sudhakar [MSFT]

  • TS3694 I get error 3014 when i try to update the OS... your help please

    hI,
    I am trying to update the IOS from itunes. I get error code 3014.
    thanks for your help.
    cheers,

    http://support.apple.com/kb/TS3694#error3002

  • HT201413 i always get error 1053, apple mobile devise will not start?.!

    my apple mobile device will not work.
    always get the error sign: 1053
    Already removed it and reinstalled but will not work.

    Hello joy3152,
    The following article provides steps that can help get the Apple Mobile Device service started.
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Cheers,
    Allen

Maybe you are looking for

  • How to pass the value between two screen in dialog programming.

    hi everybody, In case of dialog programming I have two screens 200 & 300.I want to get the value of textfield in screen 200 in scrren 300 in a label or in textfield. Thanks byee

  • Email content in GRC access request

    Dear Experts, Can any one let me know from where GRC access request email content is picked up which creating creating throught access request.? I.e when ever the requestor creating request, the manager will get an email( and in my scenario the email

  • Problem selecting date

    i am trying to find out details about purchase orders that were generated on 10th of january 2006. I fire following query to get the job done. But there is a problem with this query It does show records for po's generated on 10th jan, but also includ

  • SUP in untrusted forest using SCCM 2012 SP1

    Hi, I have a single primary site in a single domain/AD forest. I also have a single site system in an untrusted forest behind a firewall. I have installed a DP and an MP onto this server in the untrusted forest and have now installed WSUS and added t

  • Read values from Tab Separated File(tsv) or Comma Separtated File (csv)

    Hi All,    Am creating a portal application to dynamically display data in a tree structure .    I'm having some data's stored in a tab separated file . I need to retrieve these data and display it in a jsp fie. Can any help me  regarding this.? Rega