I am running windows xp two days ago my firefox stopped working it refused to open. Windows sxplorer was working I tried to unistall and upgrade on both occasions the windows message says to turn off firefox either though I cannot open it it still refuses
firefox wont start
== This happened ==
Not sure how often
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; AskTB5.6)
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)
Similar Messages
-
Netflix streaming from iPad to hgtv via VGA cable not working. Message says to turn off mirroring in airplay, but I don't know what that is or how to turn it off. Any help?
Try resetting the iPad (hold the home and power buttons down until the Apple logo appears).
Barry -
I have an iPhone 4 and as of two days ago, it just stopped charging.
I have an iPhone 4 and as of two days ago, it just stopped charging. I have tried using multiple different chargers but none seem to work. I don't know whether or not I have a warranty on it or not. What would be the best way to proceed with this issue?
Thank you for your time.Hi VvanZomeren,
To check your warranty status, find your serial number in Settings > General > About > Serial Number. Then enter it at http://selfsolve.apple.com.
Did you try a different computer/outlet as well as different chargers? -
I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?
Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem. -
When I am trying to sync my ipod touch 5.0, the error message says "ipod touch cannot be synced. An unkown error occurred (-54). Can anyone help?
Try:
error -54 with windows 8.1 and iOS 7.1.2
Unknown error -54 while syncing in itunes. -
I have been using my apple tv to access netflix for several months. It suddenly stopped working. When I try to go to netflix from the menu, it says "accessing netflix" but never does. I can access you tube just fine, but just can't get to netflix. Any ideas. I have unplugged everything and waited but nothing helped.
Update software. If that doesn't work try resetting. Mine started working after the update.
-
Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to CS5. Can anyone assist
Contact serial number support by web chat.
Mylenium -
Since two days ago iTunes 10.2.2.12 will not open
Since two days ago iTunes will not open (windows 7). No error message appears and after I try to open it my internet refuses to load anything forcing me to restart my computer. Anyone had this issue and know how to solve it?
Have you ever installed any kind of Codec pack? I did. And I noticed that one of the codec packs caused some problems with QuickTime.
If you did have installed free video Codecs. Try deinstall it and then reinstall iTune and QTime.
Good luck! -
I bought the ipad air to be used for marine navigation and installed both garmin and inavx charts. Currently none of the charts including apple maps can identify my current location. The error message says to enable location services and disable airport which I have done, but none of these applications work.
I bought the ipad air to be used for marine navigation and installed both garmin and inavx charts. Currently none of the charts including apple maps can identify my current location. The error message says to enable location services and disable airport which I have done, but none of these applications work.
-
I have Windows 7. I was previously using Windows 98 when I set up ITunes and developed a library of music and movies. When I try to log in I keep getting a message stating that am using an older version of Windows and that I need to turn off "compatability mode to use ITunes. Where and why do I need to do this?
Hi there skinguru,
You may find the information in the article below helpful.
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/ts1489
-Griff W. -
Firefox opens a window but the page stays white. It will not load.
== This happened ==
Every time Firefox opened
== about 5 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; .NET4.0C)Same problem here - I solved it by un-installing and re-installing.
If you open the error console (Ctrk-Shift-J) it will bring up three error messages - I should have copied them - these might be useful to the development staff. -
UPdate the iPad wjith new iOS upgrade that where shown under settings on the iPad, but after I did the upgrade the screen has only shown the apple and I can't get back. This has been the case since yesterday. Have turned off t.he iPad many times, but every timebwkhen Ibturn it on again the screen onöy show the apple icon and nothing else happends. What should I do? Anyone having the same problem and how can this be solved?
Did you try to connect in recovery mode, explained in this article?
iOS: Unable to update or restore -
the message in the printing window says your printer is offline,the printer is not connected i'm using a direct line to my imac , can you help please?
Hello:
This article will help, I think.
http://support.apple.com/kb/PH11143
Barry -
I can actually hold a key and it will take me to the logins and when I login I have to hold the key the whole time I'm on it or else it restarts. What do I do to fix this problem? Please help
Hi Thebestest1v1er,
Based on your description of being able to Safe Boot (holding down the shift key) but not boot normally, it sounds like your startup/restart issue may be related to one of the things that Safe Boot disables. You can find more information about them here:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
It may also be related to a disk or file system issue (as that is also something checked during Safe Boot). You may find these articles helpful as well:
Apple Support: Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417
OS X: About OS X Recovery
http://support.apple.com/kb/ht4718
Regards,
- Brenden -
CD ROM driver may be corrupted. Tried to uninstall on Device Manager and boot up again to re-install. CD ROM comes back up but has a yellow triangle with a 1 in it. CD ROM drive still does not work.
Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Vista
Check if the drive is now working.
If the drive is not working, from the Start Menu, open the Control Panel and click on Device Manager. Click to open the IDE ATA/ATAPI Controllers. Right click on the first channel and select uninstall. Do not delete drivers if asked. When uninstalled repeat the process for each channel. Also if an ATA controller is listed, right click and uninstall this, again not deleting drivers if asked. Then open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked.
Reboot the PC and let Windows reinstall the devices. Check the drive again.
If it still isn't working, run the automated fixit from Microsoft on the link below again.
Windows 7
Vista
Next, from the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Maybe you are looking for
-
Can i use a mini ipad as a gps
Hi, I have read lots of discussions but they seem to be slating off each other rather than answering the question. Please, without making fun of me, could some kind person help a damsel in distress? If I purchase a mini ipad, can I use it in the car
-
How to install Sticky Notes in Windows Server 2012 R2
I want to install Sticky Note in Windows Server 2012 R2. If this app is not available in Server 2012 then which is the best "Sticky Note" application for this platform. Thanks
-
Multiple delete in one form with ADF
Hi, Does anyone know how I can make a multiple delete? So as a sort of e-mail list where you can mark the items you want to delete with a checkbox. Then by clicking submit, all the marked rows will be deleted. thanks a lot
-
Hard drive failed; now have new drive; am able to use copier/printer but SCAN function doesn't work on my IMac. HELP!
-
WebLogic Server - Problem encoding file MS Word in jsp
Hi, i'm new in this forum...sorry for my english but i don't speak it very well... I have a problem with encoding of a MS Word file (with WebLogic Server 8.1.4).....I have this file stored in a DB Oracle like a BLOB...then I extract this file and I o