I am trying to import i frame from an SD90 video camera to iMovie, but it does not see the camera. Footage goes to i photo Why?

I am trying to import video ( i frame) from an sd90 ( listed for mac) but i movie does not see the camera. It imports into i photo. Is this normal ?

If you quit iPhoto and iMovie (with the camera still attached) then put the camera into VCR playback mode. Then launch iMovie and see if it can see the camera. If not, get out the power adapter for the camera and plug it into the wall, plug the camera into the power adapter. Reboot your Mac and wait for iPhoto to launch again automatically. Don't let it import the clips, just say No, quit the program. Then put the camrea int VCR/Playback mode, launch iMovie and check again to see if it can see the camera. Once iMovie sees it the first time it should be quicker to recognize it in future. But iPhoto does try to race in there and grab everything first.
To turn this off go to iPhoto Menu in iPhoto > Preferences > Look for Connecting camera opens: (click on the pulldown menu and choose No Application) This effectively turns off iPhoto when you first attach the camera. And it opens the way to iMovie recognizing it quicker.

Similar Messages

  • TS2662 I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac, but it does not see the numeric pad. Any advice?

    I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac running Mountain Lion. I followed all recommendations in article http://support.apple.com/kb/TS3048#1.  My computer recognises the alpha part, but it does not see the numeric pad. Any advice?

    Hello:
    I would try resetting the PRAM and SMC.
    Barry

  • HT5706 My Apple TV won't update via wifi, when I turn it on it he screen shows a picture of the Apple TV being plugged into a computer.  I have tried to but iTunes does not see the Apple TV.

    How do I update the Apple TV when I can't by wifi or computer?

    Hello there, Tmsmit3.
    The following Knowledge Base article provides the steps for restoring your device:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/ht4367
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Wiped our old iPad 1 clean, now can't install iOS from iTunes.  iTunes does not "see" the devise.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.

    Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista).  iTunes does not "see" the device.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.  Just want to get it operating again for browsing and e-reading.

    OK.  You merely erased the content and settings.  The IOS is still there.
    If it has NEVER been jailbroke, here are some standard repair procedures.  From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • I have a MacBook Pro running 10.7.2.  I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade.  iPhoto does not see the camera nor does Image Capture.  IC says there is not a camera connected.  Cable is known good.

    I have a MacBook Pro running 10.7.2.  I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade.  iPhoto does not see the camera nor does Image Capture.  IC says there is not a camera connected.  Cable is known good.  Has something changed?  Thanks!

    If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
    Try reformat the card, change the ports and/or use a USB Card Reader.

  • HT201302 I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them Do you have to use PhotoStream to do this. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Tha

    I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Do you have to use PhotoStream to do this?

    How did the photos that you want to copy off get on the iPad  ? To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a Mac you should be able to use iPhoto, Aperture or Image Capture
    To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

  • My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help.

    My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.

    By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
    If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
    I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position!

  • How do I transfer music and photos from my Power Mac G5 to my new iMac. Have an old FireWire but it does not fit the new iMac

    I am trying to transfer photos, music, etc from my Power Mac G5 to my new iMac. The Power Mac is too old for the migration assistant to help. I have an old Firewire but it does not fit the new iMac. Any suggestions? If a Firewire is the best option which one do I need? Thanks.

    You need a Firewire 800 to 400 adapter or cable or a external USB 2/3 drive (self powered) it can default to the old USB the G5 uses 1 or 2.
    Format the drive info here.
    Backup and restore info
    https://discussions.apple.com/message/16276201#16276201

  • Hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR see

    hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR sees every other drive. My computer sees it fine, so i was able to create a catalogue there. Im running windows 8.1. Any ideas ? I will also add that this drive became corrupt and was repaired by Samsung. Maybe they didn't do a very good job.. ..

    Yes pretty much that, but to clarify sorry
    Opened Lightroom.
    Create new catalogue.
    This opened the Windows 8 file explorer window and Windows recognises the drive. So I was able to create a catalogue there and save.
    I then inserted my memory card into my card reader which LR recognised. I selected it, chose all the photos within and then navigated to the right side of the Lr import dialogue window to locate this problem drive as on this occasion i want the RAW files on the same drive as the lrcat. However all my other drives are listed but not this Samsung SSD.
    In addition this Samsung SSD is not listed a drive to import from in the same dialogue window.

  • I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

    I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

    Suggest that you perform a Factory Default Reset as follows:
    Pull the Express from power
    Wait a few moments
    Hold in the reset button and keep holding it an additonal 8-10 seconds while you plug the Express back in to power
    Release the reset button and allow 40-45 seconds for the Express to restart
    Apple's instructions to do what you want are here:
    It will often help to temporarily connect an Ethernet cable from your Mac to the AirPort Express for the setup. Once the Express is configured, you can disconnect the Ethernet cable and move the Express to the desired location.
    http://support.apple.com/kb/HT4259
    Although an AirPort Extreme is shown as the extending device in the example, the setup for an AirPort Express is exactly the same

  • Stupid Question :) I took some video on my iphone but I did not flip the phone horizontally - have I screwed up the sizing and it will never import into imovie to edit it?

    Stupid Question I took some video on my iphone but I did not flip the phone horizontally - have I screwed up the sizing and it will never import into imovie to edit it?

    You can do this using Quicktime Pro 7:
    Open MOV file in QT Pro (QT 7.6.6)
    Window -> Show Movie Properties
    select "Video Track"
    select "Visual Settings" from lower window
    check "Preserve Aspect Ratio"
    Click on appropriate rotation icon (MOV rotates!)
    Click back on the open MOV in Player Window
    FILE -> Save
    You can also do this using TransformMovie, available here:
    http://www.macupdate.com/info.php/id/21859
    Also, MPEG Streamclip can rotate video while maintaining the aspect ratio as well as the interlacing when converting to DV, which is what iMovie prefers as an input:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    There is also a plug-in for iMovie from GeeThree called rotate/scale that might do the job:
    http://geethree.com/slick/index.html
    Further useful information here:
    http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#vert-horiz_rotate
    http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#43-169

  • My g3 os 9.2.2 is connected to airport router. i can print from my pwerbook but g3 does't see the printer

    my g3 os 9.2.2 is connected to airport router. i can print from my pwerbook but g3 does't see the printer

    Yes, when I bought my powerbook and airport and first set it up the chooser showed the HP 842C printer.
    The printer is connected to the USB on the Airport.
    The PB sees the G3 as a server (2 hard drives).
    Do I need to set up the PB as a server on the G3? How do I do that?
    I've tried Apple share, but when I try to connect to PB address or the name the G3 freezes.

  • HT1296 How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and the back up the phone again...

    How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and then back up the phone again will they transfer or be erased? I am a bit gun shy since my previous macbook pro committed suicide and I lost a ton of info there.

    Copy everything from your backup copy of your old computer.

  • I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

    I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

    Mike
    I have done that and it is through pressing that update, which tells me that there is anew version of iphone software, that the prompt comes telling me that this is the current itunes?

  • I am trying to export a Numbers spreadsheet to a csv file, but it does not put the commas in

    I am trying to export a Numbers spreadsheet to a csv file, but it does not put the commas in.  I want to use it with an HTML table generator tool, but the tool is looking for commas.   The Export to CSV exports it as a spreadsheet with all the formatting removed, and no commas.
    Here is the html table tool:
    http://www.textfixer.com/html/csv-convert-table.php

    Numbers '09 create CSV files with comma separated values if and only if your system is using decimal period.
    If the system is using decimal comma, the CSV files are created using semi-colon as separator.
    Yvan KOENIG (VALLAURIS, France)  dimanche 11 décembre 2011 11:11:25
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

Maybe you are looking for