I have a 750 GB SS Hard Drive that was in my Macbook pro 15", i am trying to install it into my new Macbook 13" and when i power it, the apple sign comes on but stays on that screen. Can anyone tell me what Steps i missed.

I need help trying to get my Macbook Pro 13 to bootup.

The software that comes from the factory, pre-installed has always only contained the drivers for that specific model and no others.
If you want to install on a different model Mac, you need to have the original installation DVD or go back to Recovery_HD and download again.
Your 13" and 15" have somewhat different Hardware, and you need the correct version for that model or a purchased or downloaded version to proceed.

Similar Messages

HT204400 Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen

Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help me

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

My iPad won't restore I've connected it to my mac, it goes thru the whole process of restoring and at the last bit my laptop tell me my device is no longer connected n on my iPad the apple sign comes up but the line doesn't load

please help ive tryed everything and i cant get my ipad to restore, ive discontecting it, defult starting it and no matter what my laptop keeps telling me that "this device is no longer connected " and on my ipad the apple logo comes up but the bar does not load please help !!!! i need my ipad for lectures

Hi rhiess,
Thanks for visiting Apple Support Communities.
It sounds like your iPad may not have restored fully. I'd recommend restoring it again with the iPad in recovery mode.
Use the steps in this article to place your iPad in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
After placing your iPad in recovery mode, use the steps in this article to troubleshoot the connection between it and your computer:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
If you still don't see your device in iTunes, follow these steps for Mac or these for Windows.
Best Regards,
Jeremy

My phone wouldnt power on, te apple sign comes on but it wouldnt turn on. what is the problem?

Ive had this problem before, my iphone 5c would turn itself on and off but now it wouldnt turn compeletly on, the apple sign comes on and off and thats all it does. what is the problem? and can I use my guarentee/ warranty to recieve a new iphone from apple?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

HT1430 forgot my ipod touch in the car, and now all it does is brink on and off.. lights up, the apple logo come on but nothing else.. what do i do to reset it??

Well, i forgot my ipod touch in the car, and it snowed so bad and the temperature drop below zero. I thought my ipod was just battery dead, but when i charged it, only the Apple logo comes on and then blank screen. How can i reboot, or reset?? is the battery affected even though the phone wasn't wet??

As long as no moisture got in it... 1st thing to try is give it a few hours to warm up and fully charge the battery, then see if all is working by turning it on. Cold can effect the function. If still not working try a soft reset. Press and hold both the power and home buttons together until the Apple logo appears, about 15 seconds. Then release both buttons. If that does not work connect to your computer via cable go into iTunes and try Restore from backup. If all else fails, Restore to new. If that doesn't work contact Apple Genius Bar to have your iPod evaluated. Good luck.

Tried to reset my 3rd gen ipod touch and now all it does is get stuck on a skull apple screen can anyone tell me what to do to fix this problem?

just got an ipod touch from a friend and went to reset the ipod and now it wont load or anything just freezes on a skull apple and nothing else just want to reset it to factory settings can someone help me?

Try a manual install, as outlined in link below. Put it in DFU Mode first.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

My ipod froze so I restarted it. it happened again, so I restarted it again, and it was fine but then it ran out of battery. Now when I plug it into the charger it, the Apple sign comes up for 5 seconds then that's it, it doesn't turn on. help please?

My ipod froze so I restarted it, but then it happened again, so I restarted it again, and it was fine but then it ran out of battery. Now when I plug it into the charger it, the Apple sign comes up for 5 seconds then disappears, it doesn't turn on or come up with the charging sign. Is it not going to work again, or is ther something I can do? Please help.

I have the same problem, and my Ipod turned off (when I held the home and power button)
but then when I held down the home button (after turned off) nothing happened, the screen is still black.
Do you know what I should maybe do?
Thanks is advance

I have a western digital external hard drive that needs to be re formatted for use on my but iMac but I do not want to lose existing data

I have a Western Digital external hard drive that needs to be re formatted for use on my iMac, but I do not want to lose existing data, is this possible ?

Formatting a disk always erases all the data on it. Your only option is to back it up elsewhere and restore it once formatted.

I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

I have a nano 4th generation 8gb i have tried resetting it, i get the apple logo come up but nothing else happens. It will work in my docking station but as soon as i take it out it will not respond. any ideas, do i need a new battery?

i have a nano 4th generation 8gb i have tried resetting it, i get the apple logo come up but nothing else happens. It will work in my docking station but as soon as i take it out it will not respond. any ideas, do i need a new battery?

It definitely sounds like your Nano needs a new battery at this point. You can have Apple replace it for a flat fee, send it into a third party service center to be replaced for much less, or you can purchase a new battery online and swap it out yourself if you feel up to it.
B-rock

Iphone apple sign comes up but wont turn on completely

Iphone Apple sign come sup but then dissapears and screen turns blue and never fully turns on and eventually screen turns black.

Here is a starting point.
http://support.apple.com/kb/TS3281

Plugged in brand new ipad that is still showing the 'itunes' and usb lead as a sign to connect to itunes before it will even start up and my computer is detecting the Apple IPAD 2 camera but Itunes is not picking it up? whats going wrong?

plugged in brand new ipad that is still showing the 'itunes' and usb lead as a sign to connect to itunes before it will even start up and my computer is detecting the Apple IPAD 2 camera but Itunes is not picking it up? whats going wrong?

If you're really trying to use Windows 2000, then that's the problem. As you'll see on the box, you need at least XP/SP3.
Matt

I cant access my ipod when I turn it on its fine but after i put in my passcode the apple sign comes up like its starting again and i cant get into my ipod help please!!

When i turn my ipod on it comes up the apple sign with the black background and then asks me to put in my passcode but when I put it in the apple sign comes up again like its restarting but keeps knocking on and off again please help quickly!!

Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too

ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
http://support.apple.com/kb/PH1453

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

Hello,
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1

I have a 750 GB SS Hard Drive that was in my Macbook pro 15", i am trying to install it into my new Macbook 13" and when i power it, the apple sign comes on but stays on that screen. Can anyone tell me what Steps i missed.

Similar Messages

Maybe you are looking for