I need an app that allows - top notch Powerpoint accessibility. Notetaking and audio recording. AND a possible translator. Is there any appl or two that are recommended for a busy traveling executive?
My boss just purchased and IPad and needs an app that allows -
Powerpoint Editing and graphics capability/accessibility.
Notetaking and audio recording.
Japanese Translator.
Is there any appl or two that are recommended for this busy traveling executive?
Mahalo Nui Loa!
dmkimball wrote:
Japanese Translator.
Have a look at
http://itunes.apple.com/us/app/google-translate/id414706506?mt=8
Similar Messages
-
Are there any apple experts online that can help me with my problem?
My problem is outlined here.
http://discussions.apple.com/message.jspa?messageID=4109139#4109139
I have spent months messing around on this site and other forums trying to get a response but there isn't much of a solution out there. Is there a way to e-mail someone at apple who can give me answers?
Thanks.Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
Seriously. Can someone direct me to that setting, or add it?
Well, in later OSes, Mouse buttons can be switched in the Mouse Pref Pane, no idea if Magic Mice work like that.
-
Is there any downside mixing Objective-C with C++ for iOS apps?
I'd like to use C++ since it's fast and more dynamically in memory reference.
Is there any downside mixing Objective-C with C++ for iOS apps?
When googled for info, I only found tutorials about how to let xcode compile Objective-C with C++.
Thanks for help.hokanst wrote:
Both Objective-C and C++ are (more or less) extensions of C.
C supports manipulation of pointers and casting of pointers, this implies that both Objective-C and C++ will be able to manipulate C data like arrays, structs ...
Objective-C has classes like NSData to read/write blocks of bytes from/to file and to access ranges of bytes when the data is loaded into memory.
C++ probably has similar classes (I'm not well versed in C++ so I don't know).
If you want to look into using C++ you will probably want to look at Objective-C++, the link below has links to docs on how to use C++ with Objective-C:
http://stackoverflow.com/questions/3684112/what-is-objective-c
Thanks for the info, NSData does what I need.
A replied in the link also mentioned that he's using C++ in his application too. As long as I'm aware of memory management (prevent memory leaks, etc) as @disguise said, it should be fine.
@etresoft indeed, but C is the base language of ObjC, there are ways to deal with. -
How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.
Hi,
Sorry, we do not support a matrix-question field. Please try the multilines text field (where your participant can enter multiple lines in the input text box) and see if it works for you.
Thanks,
Lucia -
Is there an apple approved agreggator that allows me to publish to the iBookstore ibooks created using iBooks author? I would like to use the interactivity that iBooks Author allows but need an aggregator that supports it. Thank you.
Apple - iTunes - Partner Programs - Book Publishers
See a list of Apple-approved aggregators
Start contacting them with your particular needs and see who fits best.
Be sure to understand this info:
Please note that if you choose to work with an aggregator to distribute your content on the iBookstore, Apple's contractual and financial relationship is with that aggregator. -
My macbook does not have a firewire port. Is there any kind of adapter that will allow me to use my advc 300 (which need to plug in to the FireWire port)?
Firewire, USB and the recent thunderbolt use completely different protocols, therefore there are no adapters for mutually adapting them, just a computer, which allows connecting them, and will work as an interface. For example, if you have an external disk in an enclosure with only FW connection and another one with USB connection, just your mac, having both, allows their interconnectivity.
If your mac does not have FW (the brief alu MB series, Air) you cannot connect a FW device, if only FW port is there. -
I need to visualize a document attached on a pdf file on an iPad. Is there any application to do that ?
Yes. Quite a few actually.
Starting with Apple's own iBooks App, I also see many recomendations for Goodreader, and Adobe's own PDF Reader. Just to name a few. Look for them in the App Store. iBooks and Adobe reade are free. You can also search the App Store for other alternatives.
Also for most PDF's the Mail App can open them directly. -
Iphone dialing. A basic phone allows number manipulation to add a prefix on a stored number in contacts, is there a way to do that?
This is specially useful while traveling and you need to use numbers stored in a domestic style. Adding the possibility to have a prompt or cursor in the number dialing screen would be very helpfulFurther to my question Ill add an example:
I'm in the US and need to call to Mexico City, the way to do,it is +52 55 12345678. This number is stored (and has been stored for years in yahoo contacts) as 12345678, the way you dial it locally; so now in order to call I need to add +5255 as a prefix to my stored contact.
This is extremely easy in other simple phones and smartphones like Blackberry by copying, pasting and editing the final number you need but it seems impossible on iPhone. It requires a great deal of manual copying.
I travel a lot and would be very thankful for a solution -
What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?
I agree with teh OWC sggestion above, but why must it be USB powered? I find that far more unreliable, and the low power devices slow.
I'd frankly get a good external enclosure and buy a bare drive. But the OWC stuff is quite good - vastly better than some of the majors (WD being aprime example of stuff that's boderline quality and often not compatible)
Grant -
Are there any reference manager systems that allow inserting citations into pages other than endnote?
Only Endnote is integrated with Pages. How other reference manager systems work, i do not know but that are not integrated with Pages.
-
I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? There is no firewall inbetween the two connections, as this is all on our internal network.
Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
Thanks.If anyone ever comes across this and has the same issue, here's what I did to fix it:
My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only". (I would've used N but one of the NICs in my house is too old to support it.) Anyway, after making this change, Facetime works fine on the phone. Hope this helps someone else! -
I used to have an icon next to the Time Machine icon in Safari that allowed me to sync my devices. It disappeared and I don't know how to get it back. Any suggestions?
Lion no longer has iSync
-
Is there any table or report that available in SAP for any PR/STR
HI All,
Is there any table or report that available in SAP for any PR/STR that are remain opened after S/O canceled.
Please advice at the earliest.
Thanks
ChandruChandru,
Of course. The standard MD06 transaction will display ALL MRP generated exception messages, and will take you to the individual material to allow you to determine how you wish to respond to it.
So, MD06>enter the plant. Optionally, enter the controller if you wish to limit the results by planner.
If you are interested in Sales order cancellations, then these exceptions would be categorized by SAP as belonging to the "exceptions during Scheduling" or "exceptions during availability" groups. On the Exceptions group tab, select these two items (6&7), deselect the rest. Enter.
You are now presented with a list of all materials that contain one or more of these exceptions. From the menu bar at the top, select Edit>Find. If you get a 'statistics' popup, click through. Select the 'Find Exceptions' tab.
Message 26 "excess stock in individual segment" means that in a MTO environment, you have more supply than demand against given order/items (as you would have if a cust. cancelled his MTO order). Select this message.
Message 20 "Cancel Process" means that you have a supply element that has NO requirements (as you would have if a cust. cancelled his MTS order). Select this messaege.
Message 15 " Postpone process" means that you have supply elements that are scheduled to be received earlier that necessary (as you might have if a Cust cancelled his MTS order). Optionally select this message.
Clik the green check. You will now notice that certain rows on the listing are highlighted. These are the ones that contain your problem children. Hit the "glasses selected MRP list" button.
This takes you to the first MD05 of the highlighted items. Review the problem. Decide what to do: Cancel a supply element? Push out a supply element? Leave it alone? Call customer service to discuss which order was cancelled and why? etc etc etc...
Once you are done with the first material, clik on the 'next material' icon or hit Ctrl-F2. Repeat. Continue till all materials have been evaluated and resolved.
This works for any other MRP message as well.
Regards,
DB49 -
My daughter can't remember her passcode, and she has never synced it. Is there any way to restore it without losing all the apps and music that were downloaded?
If you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
Follow the instructions for putting the device in recovery mode > iPhone and iPod touch: Unable to update or restore
If you are a resident of the U.S., have iTunes 10.3 or later installed, and iOS 4.3.3 or later, can re download iTunes purchases for free.
So retore the iPod, then re download the iTunes media.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
PI 7.1 Adapter Level Logging documentation
Hello, I am pretty new at PI 7.1. We are working on a logging documentation which requires us to layout how logging works in PI 7.1 both in ABAP and Java Stacks. Also, If possible could someone point me into right direction on logging documenatation
-
How to add simple path in exec command??
Hello friends...want some help on "How to add simple path in exec command?"Because on linux each time username changes I will have to change username in exec command.Please help me. My code for java on linux is Runtime r4=Runtime.getRuntime();
-
Sap documentation about this field is very poor, does anybody know what it is for? Definition Controls whether the status of an entry in the Action Matrix is to be checked or not. Use If you select this field, the system checks whether a required sta
-
SAP Presentation Design (Xcelsius) Cursor Issue
I am using the latest version of SAP Presentation Design (Version 14.1.1.1036). This is the product formally known as Xcelsius. I am publishing a component heavy dashboard to PowerPoint. When viewing the PPT slide and interacting with the dashboard
-
Hi All I defined a new calendar for shipping point called H6 ( 6 working days) . This calendar is assigned to a X shipping point. When i create a sales order i see the system is proposing 7 day also for the below SO=> Item => Schedule lines=>Click TA