I need an eprint address

I need an eprint address to connect my Photosmart printer to a chromebook.

Hi herring,
Welcome to the HP Support forums. I understand that you would like to setup the ePrint feature of your Photosmart printer to be able to print from your Chromebook.
To better assist you, would you please provide some further information:
1)       What make/model of Photosmart do you have?
2)      Is the printer currently connected? If so how (USB cable, ethernet, or wireless)?
3)      Are you using the Chromebook to setup the printer? If not, what is the operating system of the computer you are going to use (Windows 7, Mac 10.8, or Windows 8, etc)?
Thank you.
How Do I Find My Model Number?
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

I need help, I sent a job to my eprint address and it did not print

I need help, I send two jobs to my eprint address and it didn't print, nor does not even show that it even got the job. I sent it from both of the e-mails that I have set up for it to except. Can someone please let me know what I am doing wrong. By the way my printer is a HP photosmart premium fax series C410A AIO. Thanks for your help in helping me resolve this matter, Mitzi,{Personal Information Removed}

Hey mitzidg!
Has ePrint been working for you in the past? If so, try power cycling your printer (unplugging it for about 30 seconds and then plugging it back in.) If you are still having a problem, try waiting a few hours and then trying again. Occasionally we are doing updates on the ePrint servers that can cause delays.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How do I move printers to a different ePrintCenter account without losing my ePrint address?

You may find that you have a lot of printers on an ePrintCenter account and want to divide them across multiple accounts, but they are already setup on one account and want to keep the ePrint address.
There are some other scenarios where a printer may need to be moved from one account to another, but it does not seem it is well known.
This is from the Help section of www.eprintcenter.com.
Move a printer from one ePrintCenter account to another
Removing a printer from one ePrintCenter account allows you to add it to a different ePrintCenter account. To move a printer from one ePrintCenter account to another:
Click on the “X” on the printer's tab on your ePrintCenter account to remove the printer from that account. Note: Your printer's Print Apps and ePrint features will continue to work after it is removed from your account.
Using the Web Services option on printer front panel menu, reprint the Web Services Information Sheet with the printer code on it.
Log into the desired ePrintCenter account and add the printer as you normally would. If you don't know your printer ID or email address, use the Web Services menu to retrieve it from the printer.
Note: You will not be able to use ePrintCenter to configure your print apps or manage ePrint settings unless your printer is added to an ePrintCenter account.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
This question was solved.
View Solution.

I hope this information is helpful to some.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Why does setting up a new eprint address procedure reach a dead end?

UPDATE 2012 03 08 Thursday
About 30 minutes after posting this message, I starting trying again. I was having the same problems. Eventually, I started to get suggestions for names - a list of about 6 - after clicking CHECK. But, then when I would try those names - they didn't work. Then I tried the name I had originally wanted - and bingo! The dialog box returned a message saying the name was available. There was also a SAVE button in the dialog window. I saved it, the dialog window closed, and the intial page refreshed automatically showing the new address.
Yay! But, should I have had to go through all of that? And then, logging back into these forums! There were renewed difficulties. I had to - once again - change my password. Which I had to do to post my original message below.
Anyhow, I still think this process needs to be addressed. It shouldn't be so troublesome.
ORIGINAL POST
I am trying to personalize the eprint email address for my HP Officejet 7500A Wide format printer.
( Although, I think the model has nothing to do with the problem in general. )
I had little trouble signing in to the eprint centre and forums. Yay!
( I had some trouble, but that's another story.)
Step 1. I found the page for setting up a new address. My initially issued address is displayed correctly. (hidden here by me) And I clicked the 'Change' button. (under arrow)
Step 2. I saw my initial address correctly in the dialog box and window that popped. (above arrow)
(There are some browser display problems with that dialog window, but, again, that's another problem.)
Step 3. I enter a 'new' address conforming to the naming rules. And, click 'Check' button.
Step 4. A useless 'dialog' window appears. There's no message - no 'save' - no 'accept' - no 'change' button...the only option is to click the X and close the window.
(Yes, I tried various names. Yes, I tried waiting various times. No, I'm not an idiot.)
Step 5.I saw my original address is unchanged.
I tried the 'Refresh' button.
My browser window refreshes.
The address is the same.
Step 6. I clicked 'Refresh' again. I checked my email for confirmation of the change or a request to authorize a change or something that would make sense.
( I started to think bad things.)
Step 7. I searched the various forums, with various keywords without any luck. So, here we are. A new post.
Any constructive help in solving this problem will be appreciated. I have very high to superior computer and networking skills, so uninformed gibberish about 'firewall' 'browser' 'personal hygiene' or similar, will be ignored. TY

Hi HW,
The PBX is a Panasonic TA308. There is no special interface to the PBX, the line port on the SPA3102 is simply plugged into an extension, like another phone. Anyone calling that extension will have the call routed through the SPA & PAP2 to the remote phone.
The whole setup is totally seamless, & transparent to the user. As we are on a local network there is virtually no latency. There is a slight tendancy to echo, but the echo suppression mostly takes care of that.
THis has been a good exercise, and once I got my head around what I was trying to do, with your help, it was pretty easy. I think the hook flash timing would be the thing which gives most users a problem, as it seems to vary widely around the world. I was surprised at the difference between the US and NZ (.1 & .9 to .07 & .13). There didn't seem to be any other critical differences.
Now I am the local expert on VoIP "In the Kingdom of the blind, the one-eyed man is King."

Fowarding emails from gmail to eprint address

Hello,
I need to print emails, automatically, from a gmail account. I set the fowarding address to the eprinter address but I am receiving the following error message
Delivery to the following recipient failed permanently:
[email protected]
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the recipient domain outbounds6.obsmtp.com by outbounds6.obsmtp.com. [64.18.5.12].
The error that the other server returned was:
550 5.7.1 Command rejected
I can print from the email account, no problem. the problem is when I set it to forward automatically.
I appreciate any help.

Hi there, unfortunately the ePrint service does not currently support the automatic forwarding of emails from mail clients. Apologies for any inconvenience caused.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Photosmart 7510 - error when attempting to sync efax with eprint address

Hello
I keep getting a message that i should syncro both addresses.
The e-mail address in my efax profile is my eprint address.
My eprint works just fine, tested it quite often.
when ever i key in my free efax number and PIN for the syncro, it does not work.
Thanks
coolfx
PS. I have to add that HP should think the efax thing carefully through as it was not easy to set up.

Although with the eFax free account you will need to sign up through the front panel of the printer, you can also view your free account at eFax.com by signing in with your phone number and pin number.
Under the Update Account, then Preferences section, your HP ePrint email address should be the only email address that is in Receive Email Addresses. Send Email Addresses will be blank if everything is correct.
If other emails are in the Receive Email Addresses field with the HP ePrint email, fax jobs will fail because ePrint jobs (which is what eFax relies on to print eFaxes) can only be sent to the HP ePrint address or ePrint jobs could fail.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Eprint address problem

I am trying to print my driver record before the 13 th of thi month and having problem with eprint address. Would u please help me?

Barb12skin wrote:
I am trying to print my driver record before the 13 th of thi month and having problem with eprint address. Would u please help me?
We can try, but need more information from you to help!
1. What devices are you using? Computer, phone, tablet, ??
2. Which HP printer are you asking about? Did you register it correctly at hpconnected.com?
3. Are both devices using the same wifi network?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Issue that needs to be addressed...

Alright,
Switched to Verizon FiOS in December and TV and Phone have been excellent. One problem... The internet is terrible. Yes. I'm going to rant about the internet. Router that is supplied is low quality and what's the point of high speed internet when the signal is not good enough to deliever it! Next room over I get half the signal and speed is depleted!
Youtube is another problem. Comcast 25/5 plan could handle 1080p videos and with the 75/35 internet speed I have now can't even handle 240p video. Hooked right up to the router with an ethernet cable and speedtest.net is telling me I have 75/35 speed. With a 75/35 speed don't you think it can handle at least a 240p video clip? Constant buffering all the time. It's not Google. Worked great with Comcast. Common denominator is Verizon FiOS.
Many other people are having issues with YouTube and the supplied router and it needs to be addressed.

I point both of you to
http://www.dslreports.com/shownews/123282
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I have an I pad2, an iMac desktop and an I phone 5, how do I get them all to be bale to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Ay help gratefully received !!

I have an I pad2, an iMac desktop(2012) and an I phone 5, how do I get them all to be able to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Any help gratefully received !!

Graham,
For the iPad, iMac you need to create verifyible e-mail addresses created with one of the providers such as Yahoo, Gmail,etc. For the iphone you should use it's phone number, but an e-mail could be used for it too. If you want to associate these e-mail addresses with a single ID, I'm including a link to give you info about how you can do that. Read it carefully, as it can be a bit confusing.
http://support.apple.com/kb/HE68

I have a brand new MacBook Pro . I am trying to connect to the private wifi at my house but I need the IP address of my laptop . Everywhere I go on the laptop, the IP address is blank . How do I find the IP address if laptop is not connected to the wifi

I have a brand new MacBook Pro and I'm trying to connect to the private wifi at my house however, I need the IP address. Everywhere I go to find it, the adress is blank. What do I do ?

Your Mac won't have an IP address, at least not a valid IP, until you actually connect it to your home LAN. Not sure why you think you need the IP, you don't.
To connect to your home WiFi you need to know the SSID name, IE the name of your home WiFi, and the password for it. Once you have those two things click the little antenna looking icon on the right side of the menu bar and select your home WiFi name and click connect. A dialog box will pop up asking for the password, type in the password and click OK/Connect/Whatever.

Forwarding to ePrint Address?

I have my own domain name with email hosted by Gmail which I wanted to setup an address such as [email protected] to forward to the randomly generated ePrint address. When I try this I get the error below, which technically it wasnt sent to multiple recipients, just forwarded from one address to another. Is there any way I can make this work? I am not concerned about the unintended printing as I created rules to only forward if the email comes from a specific address etc. Any help on this would be greatly appreciated!
"The email was sent to multiple printers or recipients. HP's ePrint service only processes emails sent to a single recipient to protect users from unintended printing."
This question was solved.
View Solution.

Sorry to say that a lot of us are waiting for this feature to be allowed.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address. Is there a way to see the IP address of my Mac through iCloud?

My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address for the police to go and claim it. Is there a way to see the IP address of my Mac through iCloud? I've tried to get the IP address through Gmail and Dropbox but no success. Is there any software that updates automatically that I could find the IP address through?

Shouldn't the IP address be on the box you bought the machine in? If you have the box, take it to the police as evidence that it's your machine. If I were you, I would set the firmware password when you get it back, but make sure you have the password written down in a safe place. If you forget it, there's only two ways to reset it. Either pay $400+ for the tool that can do it, or pay almost nothing for Apple to do it, I think it depends on where you live. The firmware password is this encrypted password and it can't be hacked either. The password prevents anyone from booting the machine into recovery mode, thus preventing them from restoring the computer to factory settings or performing any other functions. It's not stored in the hard drive so replacing that will be of no use either.
I hope you get your Mac back and I hope this was helpful!

My airport extreme is flashing amber it says i need a ip address .... it was working just fine yesterday until i had to reboot cable modem how do i get my extreme to work again so i can have wireless

my airport extreme is flashing amber it says i need a ip address .... it was working just fine yesterday until i had to reboot cable modem how do i get my extreme to work again so i can have wireless..... please help!!!

Hi again Jen,
Most internet providers utilize "dhcp" -- you might want to check to see if your extreme is set to that function.
If you want to try, you need to go into airport utility and select MANUAL setup/ then click NETWORK button on top of the window. /select TCP/IP -- make sure that you see "Using DHCP" not MANUAL in the configuration window. If you do see using dhcp, click the renew dhcp lease button. Then you'd have to do the power down/up cycle again. If all this doesn't work, you can do a hard reset on your Extreme, which will bring it back to the way it came out of the box, then go through the same proccess that was used to set it up originally.

CompositionElement sizing issue needs to be addressed.

Ok, so it's not just the PosterFrame and VideoElement inside a SerialElement that's sizing wrong. It's anything inside a Parallel or Serial Element that includes an element with a temporal trait, and a static element such as RTMPPosterFrameElement, PosterFrameElement, or ImageElement.
I just tried to use ScaleMode.LETTERBOX with a ParallelElement that included a progressive AudioElement, and ImageElement. The ImageElement does not size properly, and can be replicated in your ExamplePlayer flex project.
Just add the MediaPlayerWrapper to a container with a smaller fixed size (like a canvas container at 320x240 ). You will notice that no Serial or Parallel Element with a static element will scale properly.
This needs to be addressed. The direction for this functionality is great! Having a Posterframe for Audio and Video is a must ... but it currently does not size properly. The only acceptable ScaleMode is NONE.

The Layout system was created after our UI components, and a separate UIComponent was created to work with the Layout system. We have a backlog item to fix this in the current sprint, starting today. I have a work around below which demonstrates how to use this little know component call a RegionGateway. Cheers!
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
layout="absolute"
creationComplete="init()"
xmlns:players="com.adobe.strobe.players.*">
<mx:Script>
<![CDATA[
import org.osmf.media.MediaPlayer;
import org.osmf.metadata.Metadata;
import org.osmf.gateways.RegionGateway;
import org.osmf.layout.RegistrationPoint;
import org.osmf.display.ScaleMode;
import org.osmf.layout.LayoutUtils;
import org.osmf.proxies.TemporalProxyElement;
import org.osmf.utils.URL;
import org.osmf.media.URLResource;
import org.osmf.image.ImageLoader;
import org.osmf.image.ImageElement;
import org.osmf.composition.SerialElement;
private static const REMOTE_IMAGE:String = "http://mediapm.edgesuite.net/osmf/image/adobe-lq.png";
private static const REMOTE_IMAGE2:String = "http://mediapm.edgesuite.net/strobe/content/test/train.jpg";
private var region:RegionGateway;
private var serial:SerialElement;
private function init():void
serial = new SerialElement();
serial.addChild(new TemporalProxyElement(5, new ImageElement(new ImageLoader(), new URLResource(new URL(REMOTE_IMAGE)))));
serial.addChild(new TemporalProxyElement(5, new ImageElement(new ImageLoader(), new URLResource(new URL(REMOTE_IMAGE2)))));
serial.addChild(new TemporalProxyElement(5, new ImageElement(new ImageLoader(), new URLResource(new URL(REMOTE_IMAGE)))));
serial.addChild(new TemporalProxyElement(5, new ImageElement(new ImageLoader(), new URLResource(new URL(REMOTE_IMAGE2)))));
for( var itr:Number = 0; itr < serial.numChildren; ++itr)
LayoutUtils.setLayoutAttributes(serial.getChildAt(itr).metadata, ScaleMode.LETTERBOX, RegistrationPoint.CENTER);
LayoutUtils.setRelativeLayout(serial.getChildAt(itr).metadata, 100, 100, 0, 0);
region = new RegionGateway(serial.metadata);
wrapper.addChild(region);
serial.gateway = region;
var mediaPlayer:MediaPlayer = new MediaPlayer(serial);
invalidateDisplayList();
protected override function updateDisplayList(w:Number, h:Number):void
super.updateDisplayList(w,h);
if (region)
LayoutUtils.setAbsoluteLayout(region.metadata, stage.stageWidth, stage.stageHeight);
]]>
</mx:Script>
<mx:UIComponent
id="wrapper"
width="100%"
height="100%"
/>
</mx:Application>

Is there a way to personalize the eprint address?

I just got a Photosmart Premium All-in-One printer, and it's great, but I have a question about the ePrint address it spit out:
I was wondering if I could somehow manually change it to something else (e.g., [email protected]). The randomly generated ePrint address is a bit unwieldy.
If anyone knows, your help/input is appreciated!
The PDADoc!
This question was solved.
View Solution.

Thanks for the response.
I hope that they make this an option in the [near] future; as I said, I think the randomly generated ePrint address is unwieldy and not easy to commit to memory.
The PDADoc!

I need an eprint address

Similar Messages

Maybe you are looking for