I-pod not recognized by Computer

Hello, everyone. I've had my 80G classic for about two years and last week bad things happened. When I plugged in my I-pod it said that this device could work better using USB 2.0. I thought that this was weird but didn't think much of it.( My I-pod had been using USB 2.0 for a few months on this computer) then the next day. It stopped connecting at all and says that this device can not be recognized. I have turned off my PC and tried pulling the power cord out. I've tried reinstalling my drivers. The funny thing is that I can still charge my I-pod with fire-wire and it works normal besides this.

That sounds like something strange may have happened to your USB drivers, lichu.
In the course of your troubleshooting to date, have you worked through the following document?
[iPhone or iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date|http://support.apple.com/kb/TS1538]

Similar Messages

  • Ipod touch not recognized by computer or ITunes

    Ipod touch is not recognized by computer or Itunes. Tried it on Windows XP OS and also Windows 7. Error message OxE8000068, unknown error, appears. Thanks for any help!

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Ipod Nano not recognized by computer (or itunes) but charging.. so connected

    worked until this am (though I think I had this once before, a couple years ago, too often follows itunes updates)
    connected to computer (win 7) this morning and it is not recognized by computer (or itunes)
    can't find it looking in Explorer
    but, it is charging so... it is connected
    have tried everything except re-installing itunes... if the computer is not seeing it, and it shows the connection when itunes isn't open...
    would that make any difference?

    diagnostic shows....
    **** Device Connectivity Tests ****
    iPodService 11.3.1.2 (x64) is currently running.
    iTunesHelper 11.3.1.2 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano (4th Generation) running firmware version 1.0.4
    Serial Number:       Y(I removed info)
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    it looks like everything is fine, except it can't find the ipod... why?
    when I plug in a thumb drive, it recognizes that, why not the ipod?

  • Ipod not recognized by computer or self

    Ipod touch shows the apple screen but will not start, I did the hold power button then hold home button etc didnt work. the apple does stay on screen and flashes here and there but still no changes. Also, is not recognized on computer.  Help??

    sounds like a currupted iPod if its stuck like that or you Jailbreaked it.

  • IPOD Shuffle not recognized by computer, and caused a  USB power surge

    Device is not recognized by computer, and I tried the listed support recommendations.
    The problem originated when I plugged the IPOD shuffle directly into the computer USB ( not using a hub), and this caused a warning window to appear saying unknown device has caused a power surge to this port, and most be removed. Prior to this event, the IPOD shuffle has worked (with direct contact with computer usb or through a powered highspeed usb hub) without issue for nearly 1 year. Any taker's on this issue? Thanks.

    Hi JBR,
    Go to your control panel and click on Install/Uninstall programs. Scroll down and see if you have multiple versions of the ipod updater installed on your computer. If you do, then uninstall both versions. Reboot your computer.
    Next, go to the downloads page and download/install the 1-10-2006 ipod updater. Once installed, go to your start programs and select ipod updater from there. Plug in your ipod and wait a moment. If it's like mine, it'll recognize your ipod and then you can do a "restore" for a clean format.
    After that, open itunes and life should be good.
    Hope this helps!

  • Curve not recognized by computer

    hello, i baught a blackberry curve on ebay (big mistake!) it functions as phone, but is not recognized by computer. when i plug it in via USB it connects for a second and then stops, i.e. synchronization is not possible.
    i reset the device, reinstalled the DM software, spent hours trying to solve this issue nothing works - any help?
    btw, under 'manage connecetions', USB does not appear at all.
    thank you so much for any input

    prior to doing anything, you need to install the USB drivers.
    http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
    after you have checked everything is okay, you can do the next step, that is install the Desktop Manager.
    Moreover, ou can wipe your device so that there is no remains from the previous owner.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Charging icon appears but not recognized by computer  help!!!

    Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
    Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
    What's going on???
    HELP!!!!

    Have you tried a different cable?
    This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
    Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
    MJ

  • I pod shuffle not recognized by computer

    JUst got shuffle...computer says not recognized????? Help

    when you have a windows:
    1 open iTunes
    2 connect iPod
    3 open explorer
    4 serach the usb ports about the ipod click on them
    5 ipod is connected
    when ipod is not connected move the power button on the shuffle and press some buttons
    i hope i could help you

  • I-Pod not recognized

    Whenever I plug my I-Pod Photo into my laptop with Vista, I get told the USB Device is not recognized. Any ideas on what I can do? As of right now my laptop is the only computer I have at college, and I'd rather not have to wait until I can get my desktop sent.

    See if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    iPod not recognized on a Windows laptop.

  • IPod nano does not charge & is not recognized by computer or iTunes

    I have a 1st generation nano 1 GIG.
    It appears "dead."
    It is not recognized by My Computer, iTunes or the Ipod Updater (The updater asks that I connect the iPod, which I do). The iPod diagnostics through iTunes also reports that my iPod is not connected.
    I have tried my iPod on 4 different machines, with one of them having USB 2.0.
    I tried the following from Jeff Bryan. (I don't know if the links from his post have carried over into this post.) So I will list the things I have tried near the end of this post.
    - My iPod won't turn on.
    - iPod battery doesn't charge.
    - iTunes 7 doesn't recognize the iPod.
    - Your Windows PC doesn't recognize iPod.
    - iPod appears in Windows Explorer but does not appear in iTunes.
    - iPod does not appear in iTunes.
    - Fast user switching in Windows XP is not supported.
    I tried resetting my iPod by switching the Hold button on and off and then pressing Menu and the Select button for 6-10 seconds. I have done this over and over and over.
    I have uninstalled the latest iTunes, reboot, reinstall - same problem.
    I have stopped the iPod service, plugged in the iPod, but it isn't recognized by My Computer as stated in the Apple Do-It-Yourself Help. I launched iTunes - same problem.
    I used the window cleanup utility, reboot, reinstall iTunes, connect iPod - same problem.
    I have used the Windows ipconfig utility to change my boot parameters, but still nothing.
    If anyone has any ideas, I would greatly appreciate them.
    My iPod is just shy of 6 months.
    I do have a replacement contract with Best Buy - but I would like to cover all the bases before I succumb to defeat.
    Thanks
    XP Home with USB 1.1   Windows XP   4 machines, all XP, 2 XP Pro, 2 XP Home, 3 have USB 1.1, 1 has USB 2.0, 2 machines have latest iTune

    I'm having the same problem, my ipodnano is about a year old and I can't figure out what to do. I just installed the new itunes on my new laptop with vista premium. I'm desperate for a resolution, do you have any suggestions at all. Any help is greatly appreciated. Thank you

  • Ipod is not recognized by computer or itunes and does not charge

    Hi, so for a few months I've been having a problem with my iPod Touch 4th gen where when i connect the ipod to the computer it does not connect. My Computer says "USB device not recognized" and also I've recognized that my ipod doesnt charge either. When I connect it to a wall charger the ipod charges fine, but i can't sync anything or any music. I have no idea how to fix this problem :\

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Ipod Touch 3rd Gen - not recognized by computer or itunes.  Shows cable pointing to itunes logo.  Can't reset it.  Doesn't work at all.  Have tried all the supposed fixes on the apple site with no luck.  It suggested asking other users !

    I have a 3rd Generation ipod touch that is not recognized by itunes or my computer.  My itunes works with other apple devices I own.  I cannot reset the ipod touch and can never get to the screen where it is supposed to show a red battery to turn it off.  I can't reset it.  Have tried to use the suggestions on the apple site to no avail.  Any suggestions ?

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • After upgrading to 8.1 in windows, my ipod is not recognized in computer or itunes

    I upgraded to Windows 8.1 a while back, and just tried to synch my ipod with itunes and now my ipod is not being recognized in my comuper or itunes. Does anyone know why this is and/or how to fix it?
    Thanks!!
    Amber

    Hello Amber,
    I would be concerned too if my iPod was not recognized by iTunes.  I found a couple of articles that might help with this.
    If you don't see your iPod in the My Computer or Computer section of Windows, follow the steps in this article:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    If Windows recognizes your iPod but iTunes does not, follow the steps in this article:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • TS1369 ipod touch not recognized by computer or itunes

    My iPod Touch is not recognized by my computer or itunes. I believe this happened after the recent upgrade for latest fixes.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Also, if you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

  • Ipod not recognized by computer or itunes GETTING FRUSTRATED

    My ipod nano 3rd gen. is not being recognized by my computer. Everything worked fine, then plugged it in to my laptop one day and all I might get are 3 beeps, but nowhere in my computer is it shown that it is there. Ii have tried reinstalling itunes, the "5 R's", rebooting my computer, nothing is working. I am finding more and more posts of people having this trouble, and nowhere have I found that apple has actually offered a solution. Does any one have any ideas on how to fix this? It would really be nice to be able to sync and charge my ipod again.
    Thanks for any help you could offer.

    Hello Triguy60,
    Thank you for contacting Apple Support Communities.
    The following article have information that would be useful in sorting out your issue with the iPod not being recognized:
    iOS: Device not recognized in iTunes for OS X
    http://support.apple.com/kb/TS1591
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    iPod nano (5th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    Regards,
    Jeff D.

Maybe you are looking for

  • Does anyone know what protection Apple has for the virus that is supposed to shut us out of the internet on Monday?

    Does anyone know what protectio Apple has for this virus that is supposed to shut us out of the internet on Monday?

  • My Mac will not go to sleep!!

    hello, I am trying to get some help because just recently my computer will not sleep and I have tried the reset process and still no luck. Am i doing something wrong? When I select the sleep mode the screen goes instantly but the computer still runs.

  • Itunes no longer auto launches

    Itunes used to launch automatically when I plugged in my iphone, but it no longer does. I can still start it from the start menu, but I enjoyed the automatic launch. The checkbox to "automatically synch when this iphone is connected" IS checked. Any

  • Native Toplink to EclipseLink to JPA - Migration Best Practice

    I am currently looking at the future technical stack of our developments, and would appreciate any advise concerning best practice migration paths. Our current platform is as follows: Oracle 10g AS -> Toplink 10g -> Spring 2.5.x We have (approx.) 100

  • "Access Denied. Contact your administrator"

    Hello, We are a small company using WindowsServer2008R2 Enterprise software for our file server. Users are using Microsoft Office 2010 on Windows 7 Professional. All users have similar permissions. When I open a file from file server on my computer,