ID scenario  transport to qs and prod

hi all ,
i have built my ID Scenario for dev i.e i have given all ECC details of dev system .
please tell how can i transport to quality & producation  .
1. do i need to built id scenario  in qa and producation again .
please help .
thanks,

Check the following:
Do u have the Single SLD for all the systems DEV,PRD or Indivisual.
if it is not single you need to also take care of transport targets in the SLD along with the IR and ID tranports..
Configuring Transport Groups and Tranport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Your SWCV can be exported and imported using TPZ files into the IR.
The ID also use TPZ files and as the objects are imported , the business system details will be filled up .
Refer How to handle SLD guide for help:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
have a look on this Pdf .
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0d96022-9df5-2910-90b8-8e0580e0987e
SLD configuration
SLD Configuration
Look at the below weblog for XI transports.
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms

Similar Messages

  • Java proxy client logical port transport to Q and prod issue in target addr

    Hi All,
    I have a java proxy client having a logical port (configured using NWDS) to consume a web service in the provider system.
    In the logical port, I have given target address, and logical port name. While moving this client proxy NWDI dev track to Q and prod,
    how do I change this target address to point to Q and prod respectively. In other words, even though I am using Visual admin to configure the destination url for the logical port, to point to Q and prod, its still referring to the dev environment provider service after moving the proxy client to Q and prod. What is the suggested approach to take care of this issue
    Thx
    mike

    Hi Michael,
    I can only help from that point of view that I believe this question belongs to the forum
    Service-Oriented Architecture (SOA) and SAP
    Please try to raise this question there.
    Thanks and Regards,
    Ervin

  • Goods transport between WH and Prod area via Material Staging

    Gurus,
    I got my components from Warehouse to Storage Type 100 (default) using Staging. Now I confirmed my Production Order. So the Storage Type 100 should show my final product and 0 stock of components right?
    It still shows all the components in Storage Type 100 and no FINAL Product. Also in the Prod Order Confirmation screen it does not show any Goods Movements. I read it should show "5 transactions processed and 0 failed" on Prod. Order Confirmation, but I do not see the message on co15.
    Look forward to your replies
    Regards,
    Vikas

    Hi,
    Storage location control should be able to take care of your problem.
    If you want to stage the material to a different IM location then the WM location then make the following settings
    If location xxxx is your WM location and location yyyy is your Production location.
    You have defined Production storage type ZZZ for production storage location YYYY and have maintained the supply area for the same
    In WM configuration - For interfaces - IM interface-Control of Assignment "Plant / Stor.Loc. - Whse Number"
    Assign location XXXX as the Standard Location. Maintain entry donot copy sloc in TR for location YYYY
    In WM configuration - For interfaces - IM interface-  Storage Location control for WH
    This entry ensures that there will be a WM tarnsfer Posting between your WM and Production storage Location automatically when you confirm your TO. You can have this done via a btach job also if you want cumulative posting. (schedule job RLLQ0100)

  • Form getting misaligned in QUA SYS and PROD SYS , fine in DEV SYS

    We have a PO smart form in development system which is working fine .But in QUA and Prod sys the text is getting misaligned.
    The problem is with the text that is assigned to a table line type with fixed column width , which is not displaying in the respective column width assigned to it.
    Instead it acts as if there is no table line type  assigned to it .(display as normal text and not as columns in table line type)
    There is also an smartstyle assigned to it.
    I checked with the table values in both sys and it is same.
    Also the smartstyle is active and is same in both the systems.
    Please note that this problem didn't pop up previously and was displaying fine in QUA SYS and PROD SYS
    This problem happened when the previously working form( in Dev sys) was altered with a small text in the heading of the
    form and was transported to QUA and PROD SYS.Apart from changing the heading we didn't touch any text or tables or styles anywhere in the form .
    Why is this problem  happening ?
    Please help us to resolving the issue !

    HI Just remove the new text which you have added in the header and check. SO that we can can find out this problem is due to Text or not.
    Thanks
    Partha

  • Query Comparison in DEV, QA and PROD

    Hi,
    Is there any way to compare the queries in DEV, QA and PROD to make sure that all the boxes have all the queries (provided we have followed the system landscape like transporting from DEV to all other two).
    If not (this is happenning most of the time, because users are creating queries directly in PROD), we have to compare each and every query against the particular Data target in all the three environment. 
    We want to have a control in such a way that all queries are only created in DEV by the users and we will transport to QA and PROD. Once after making sync between landscape, we will restrict the access to the users to create directly in PROD.
    Please help urgently.
    Thanks,
    David

    Hi,
    Use S_RS_COMP and S_RS_COMP1 for BEx security and specifically for Query use S_QUERY.
    Cheers,
    Kedar
    Message was edited by: Kedar Patil

  • SAP Fiori - Transports Dev to QA/Prod issues (Activate and Maintain Service)

    Hi All,
        We have configured and activated Fiori - PO and PR scenarios in development environment using Central Hub Architecture (Gateway-Backend system). It is working great. However, we are facing an issue while transporting the configuration between the environments. We configured the entries (System Alias, Activate and Maintain Service and Scenario) for QA/Prod Environment in Development environment and transporting those (as it lets us to create TR's and as any SAP Configuration or technical Object). The transports are imported successfully, however the service is not activated or seen in "Activate and Maintain Services" in QA/Production Environment. But, scenario definition for PO and PR are imported successfully and visible
    Steps and Transports:
    1. System alias configured for QA/Production (Central hub) entries in Development box and transported - Successfully imported and entries are seen
    2. Activate and Maintain Service entries are configured (workbench request- Loads Oauth and Metadata along with the System Alias assigned) - Transport import successfully, However not seen in "Activate and Maintain Services" (tried even creating a customization TR's)
    3. Scenario Definition (PO and PR) - These are successfully imported as well as we are able to see the entries in SPRO
    Solution Options:
    1. Configure the entries and import (No success yet)
    2. Manually re-configure or Activate and Maintain Service in each system [QA/Prod] (Again, SAP let us transport for this step - So, my understanding option 1 should work).
    Any recommendation or suggestions ? Or is the Option 2 the only way to go!
    Thanks in advance
    Cheers,
    Sri

    Hi Sri,
    I think the Support Package for Gateway is old.
    1922510 - Activated Gateway Services are transported only incompletely
    Regards, Masa
    SAP Customer Experience Group - CEG

  • How to transport a query created in system development to quality and prod?

    Hi All,
    I'd like to know ow to transport a query created in system development to quality and prod?
    Thanks

    Hi,
    Queries are not saved under any transport request.
    We would have to go to transaction sq02 and click on the 'Transport' button ( with truck icon).
    In the screen specify your query name, infoset name, and usergroup name and select the option 'Download'.
    Save the downloaded file on your desktop.
    In your quality or production system, go to SQ02 and click on teh same button,
    select 'Upload' and specify the name of the query, infoset and usergroup which you want to upload.
    Select the downloaded file.
    Select the option 'Overwritting allowed' as applicable.
    Thanks,
    Harini

  • Transporting a query created in system development to quality and prod ...

    Hi All,
    I'd like to know how to transport a query created in system development to quality and prod?
    Thanks

    From the menu on top in SQVI or SQ01 transactions, choose Query -> More functions -> Generate program.  Then choose Query -> More functions -> Display report name.  This report is an ABAP report (just like any other ABAP program).  Please check with an ABAPer if this report can be pushed into a Workbench Transport request, so you could then move it to QA and Prod.

  • Transporting Z table entries to QA and Prod

    Hi Guys,
    I have z table (has field MANDT) with delivery class A and no table maintenance in Dev box with 600 records. I need to delete 3 records and change 10 records and then transport them to QA and Prod.  I am not adding new records. 
    I created one CUSTOMIZING transport.
    I am using  SE16 -> Table Entry -> Transport Entries. It is asking for workbench transport instead of Customizing transport.
    Can I transport the deleted and changed entries using WORKBENCH transport?
    Please help.
    mini

    Hi
    Yes u can.
    Max

  • Transporting roles from dev to qa and prod servers ep6sp11

    Hi
    We have EP6 SP11 -erp2004
    I will be transporting roles from the dev environment to a QA(quality assurance) and a production portal server.
    Only the roles needs to be transported, <b>no</b> user assignments to be transported.
    I have read some docs on this and would just like to confirm this is the procedure:
    Basically:
    1.Export the roles to a common directory
    2.Importing it in qa and prod
    3. From here onwards i need help on..Do i add the roles through delta links??? What other steps needs to be done?

    Hi Pradeep
    Thanx for your reply.
    With the exception of the delta link assignment, i will assign it directly, I can just follow the procedure i have written?
    RD

  • Transported to A and Q box - Changes not reflected in only  A Box Q Box Ok?

    Hi Experts,
    I am facing an issue with Transportation in SAP BI.
    In my project we have a requirement  to create a new query After that we have developed that query with new requirement features.
    As per the user requirement, the new developed query must be moved to production and where as the old version could not be displayed any more.
    For that purpose, after developing the query in Dev Box i have collected the tp and  deleted the old version query in DEV Box.
    I have transported the new version developed query to Acceptance Box and then to Quality Box.
    And tested in Acceptace and Quality Box whether new developed query features is reflecting or not .
    Found that, in Quality Box new query featured reflected where as in Acceptance  Box the new query reflections have not reflected.
    Now my question is if i trasport the same tp to production whether changes will get reflect or not
    And also would like to know the route cause why in the acceptace changes have not get reflected.
    I am confirming that, in both acceptace and quality box the tp were trasported succefully with out any of the errors.
    Kindly reply me any of the folks faced this kind of issue or scenario in your projects or expeiriance.
    Thanks,
    SN.

    Hi,
    Just try re-importing your query in OVERWRITE mode from D to A. Also request your basis team while transporting your TR to Prod to transport it in OVERWRITE mode.
    Hope this helps.
    Regards
    Jeeth

  • "No service for system..." after transporting from dev to prod

    Hi,
    again i have a problem like some other guys also had. I already checked several postings concerning this issue!
    We transported dev-objects to prod, also ID-object like Business Systems.
    The sender side now changed their communication for sending IDoc's to our Prod-XI. While sending IDoc's form Prod R/3 they get "no service for system SAPPSI, client010.." etc.
    I already checked:
    1. idx1 port is SAPPSI pointing to right destination PSI
    2. idx2 all necessary Metadata are loaded
    3. checked adapter specific identifiers in ID and also reloaded them with no change!
    4. in receiver IDoc CC i added RFC-Dest: PSI and Port is SAPPSI
    5. did a cache refresh!
    I need to let you know that we are using one SLD and already communicated with the sender-prod r/3 -system to SAP XI -DEV.
    can someone please help us?! we have no clue what might be wrong!!
    br

    Well i have some strange thoughts:
    when the idoc is send in sender-system the values on sender informations are:
    Port: SAPPSI
    Partner number: PSICLNT010
    Type: LS
    The error we receive is:
    no service for system SAPPSI, client 010 in Integration Directory
    Shouldn't there be the Partner-Number like PSICLNT010?!
    Can someone confirm and tell me if i am right?!
    br

  • Problems when transporting from DEV to PROD

    Hi experts, I have problem during transport from DEV to Production.
    We have a  DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error  like:
    After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
      Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
      The InfoObjeto ZCM_RENC version does not exist in active
      The InfoObjeto ZCM_RENM version does not exist in active
    1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
    2. There are any items to check in production before to transport?.
    PD: All of the Objects in DEV are in ACTIVE status
    Tanks,
    Ramon Sulvaran

    The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
    Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
    Activation of DataStore objects of type Object
    Check DataStore objects of type Object
    DataStore Object Verification ZCM_DS01
    The DataStore object is consistent ZCM_DS01
    Burning the DataStore objects of type Object
    Internal activation (DataStore Object)
    Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
    Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
    Create / Delete the indexes for the active table
    Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
    Type of table / BIC/WAZCM_DS0100 recorded
    Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
    Log ZCM_DS01 DataStore object changes was recorded successfully
    Writing Object Catalog entries (Tadiran)
    He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
    He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
    He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
    He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
    Activate all ABAP Dictionary objects (5):
    Error / Warning in progr.activación Dict., Detailed log> Detail
    Activate table / BIC/AZCM_DS0100.
    Lack of expansion to the category table
    Lack of extension category for include or subtype .......
    When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error:  Error/ Warning in program Activation Dcit. Detailed Log -> Detail

  • Grid Control : Change Management Across Non-Prod and Prod

    All,
    I had some questions with regards to Grid Control Implementation Architechture on Prod and Non-Prod Env's
    The best practice is to configure a production Grid Control (GC) environment to monitor only production targets. This prevents nonproduction targets from adversely impacting a production environment.Another issue could be the compliance policy where in the production systems are to be isolated from Non-Production Environments.
    If this is the case then we have to have 2 GC environments , 1 for Prod and 1 for Non-Prod. In such a scenario how well can we do change management (Version control ) across the Non-Prod and Prod Environments ?
    To be more specific
    How is version control managed for Oracle builds if we have separate GC for Prod and Non-PROD? (Change Management pack / Configuration Management Packs are there but what is the real depth of these? )
    Change management for the Oracle Environments from DEV -> Test -> Pre-Production-> Production? We aim to have consist build across the environments can we achieve this if the GC is managed by Different OMS/OMR and if we have 2 separate environments how do we sync the GC environments managing PROD/NON-PROD after a change?

    This is feature is not there in 10.2
    This situation can be avoid by chagning the 9i port to 1522
    or install the GC on diffrent box

  • Transport an Appraisal and Objective Setting Template

    Note the following advice pertaining to transporting an appraisals and objective setting template (I have not found documentation about this anywhere else, so hopefully some of you find this useful):
    Scenario:
    You have maintained your templates in PHAP_CATALOG_PA in the main config client, and you have transported all other configurations (basic settings, etc.) to your unit test/integration test environment.
    However, although you have right-clicked the category groups and templates to be transported and included them in a transport request, you find that only some of your configuration (or perhaps none at all!) is arriving in the target client when the transport is performed.
    You may initially be able to work around this by downloading/uploading your config, but once your templates contain more complex configuration (such as using dynamic element references, etc.) you will find that this is no longer a feasible approach.
    Cause & Resolution:
    The problem is caused by outdated information in the workflow definition environment (transaction SWU3), and specifically the section labeled "Check Entries from HR Control Tables".
    Run transaction SWU3, expand tree node "Maintain Definition Environment" (which should be marked with a red cross at this stage) and click on "Check Entries from HR Control Tables". The information presented in the right-hand pane indicates that:
    If there are errors regarding the transport objects PDST or PDWS, the relevant entries are not maintained in table SOBJ. You can use the report RHSOBJCH to rectify this later.
    Proceed as suggested and run report RHSOBJCH (through SE38 or SA38) in the config client (i.e. where the templates are to be transported from). This has no side-effects I am aware of other than updating the reference information required.
    If you now run SWU3 again you should find that the "Check Entries from HR Control Tables" node is marked with a green tick.
    Simply go back to the catalog, include your cat.groups & templates in a transport again, and Voila! Our work here is done.
    Happy transporting...
    Side-note: You may ask (as I did) what transporting of appraisal templates has to do with workflow, but it just so happens that the PD objects and infotypes associated with appraisals (VA, VB, VC, etc.) are transported through the same mechanism as workflow templates (which are also PD objects). if you peek inside the transport you will note that everything to do with the template and category group configuration is bundled inside PDWS and PDST transport objects...
    Edited by: Francois Van Lille on Jun 29, 2009 9:58 AM

    >
    A. Jimenez wrote:
    > Hi Francois,
    >
    > I have successfully transported Categories and Templates, but I have customized "appraisals process", which seems to create VH Objects, and this objects or customizations are not added in the transport order.
    >
    > You or anyone know how to transport this customization?
    >
    > Thanks in advance
    Hi Abe,
    what is the appraisal process you are talking about?  The new stuff in ep4 where you define the process and steps which create the roadmap at the top of the document?  if so SAP does not have a great straightforward solution, but they did provide us some options.
    you can check out this thread and if you want I can send you the full document that is referred to in the post. 
    EP4: Performance Management-Flexible-Transporting the Tab & Process config

Maybe you are looking for