Identify selection of sub-total line in ALV grid

Hi folks,
Is there a way to identify in the report if the user has selected any sub-total line in an ALV grid? Both for REUSE_ALV_GRID_DISPLAY and CL_GUI_ALV_GRID.
Thanks
Sagar

Sagar,
1. I don't think its good design, if you want to process those three lines, you should ask the user to select those 3 rows and process them.
2. If you have no choice, tyr these methods, these might give you some info
GET_SORT_CRITERIA
GET_SUBTOTALS
These methods might give you the info you are looking for. Try it out.
regards,
Ravi

Similar Messages

  • Check condition on sub total line of ALV list

    Hi All ,
    Is it possible to check  condition on the value of subtotal line in ALV list ,
    I,e If the value of subtotal line is say greator than 100 I need to change the color of that line or change the text on the subtotal line .
    I know how to change the subtotal text but i want to change with respect to value of the subtotal ,
    Any input if this can be achieved will be great .
    Thanks in adv .
    Vinay
    Edited by: vinay kolla on Jul 29, 2009 4:43 AM

    Hi,
    I donu2019t think there is any direct way to check  the subtotal value in LIST display, try the following logic.
    1. Use the event BEFORE_LINE_OUTPUT to check the subtotal value and accordingly change the text or colour of the line.
    2. To use events in ALV, first get the events into a table through the FM REUSE_ALV_EVENTS_GET as shown
         CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
          EXPORTING
          i_list_type = 0
         IMPORTING
          et_events   = z_i_events.
      SORT z_i_events BY name.
      CLEAR z_wa_events.
      READ TABLE z_i_events WITH KEY name = slis_ev_before_line_output
                            INTO z_wa_events BINARY SEARCH.
      IF sy-subrc = 0.
        MOVE 'BEFORE_LINE_OUTPUTu2019 TO z_wa_events-form.
        MODIFY z_i_events FROM z_wa_events INDEX sy-tabix.
      ENDIF.
    3. Create a form with the name BEFORE_LINE_OUTPUT and do the coding to check the subtotals there.
    Form BEFORE_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO.
    *The structure RS_LINEINFO will have u2018Xu2019 in the field rs_lineinfo-subtot for subtotals.
    If RS_LINEINFO-SUBTOT = u2018Xu2019.
    *Here try to find the totals by looping at your final internal table till rs_lineinfo-tabindex.
    *Then based on this u can give the colour to the line.
    *I think there is no other way to check the subtotal value.
    Endif.
    Endform.
    Edited by: venkatesh PH on Jul 29, 2009 5:31 AM

  • Total and non-total lines in ALV grid

    Hi all,
    Does anyone know if there is any standard SAP functionality for retrieving the non-total/raw item lines that lies beneath a total line in an ALV grid (after the user has selected the total line)?
    All helpful answers will be rewarded!
    Best regards,
    MV

    Try the ALV event AFTER-LINE-OUTPUT may be it can help u to achieve ur requirement.
    Append  AFTER-LINE-OUTPUT event to the internal table T_EVENT.
    CLEAR W_EVENT.
    W_EVENT-FORM = SLIS_EV_AFTER_LINE_OUTPUT.
    W_EVENT-NAME = SLIS_EV_AFTER_LINE_OUTPUT.u201CAFTER_LINE_OUTPUT event
    APPEND W_EVENT TO T_EVENT.
    FORM AFTER_LINE_OUTPUT
      USING P_RS_LINEINFO TYPE SLIS_LINEINFO.
    Here you have to write the logic to retrieve the 'total' line
    ENDFROM.
    Now call the alv FM
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
          I_CALLBACK_PROGRAM = L_REPID    "Program Name
          IS_LAYOUT          = W_LAYOUT   "Layout of the Report
          IT_FIELDCAT        = T_FIELDCAT "Field Catalog for Report
          IT_EVENTS          = T_EVENT    "For setting the events
       TABLES
          T_OUTTAB           = T_OUTPUT   "Report data Internal Table
       EXCEPTIONS
          PROGRAM_ERROR      = 1
          OTHERS             = 2.

  • Total line in ALV grid

    Hi,
    Can I use a total line in an ALV grid and hide part of the columns, so that only the total line will be presented for some of the columns ?

    Hi,
    Yes u can use a total column in the ALV Grid.
    Check the code below:
    AT LAST.
          WA_ALV_CAT1-FIELDNAME = 'TOTAL'(004).
          WA_ALV_CAT1-COL_POS = L_I.
          WA_ALV_CAT1-COLTEXT = 'TOTAL'(004).
          WA_ALV_CAT1-JUST =  C_CENTER.   " 'C'.
          APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
          CLEAR  WA_ALV_CAT1.
        ENDAT.
    Regards
    Kannaiah

  • How to display sub total text in ALV grid display reporting

    Hi,
    I want to display a text 'SUB TOTAL'  in Sub total  row  of an ALV report.
    Presently I am getting the name of the field used in sorting to get sub totals. But I required to display own text. Could you please give me solution.
    Thanks
    Giridhar Karnam

    For doing this u need to simply modify the layout properties, please award points if found helpful
    DATA: L_LAYOUT TYPE SLIS_LAYOUT_ALV.
    L_LAYOUT-SUBTOTALS_TEXT = 'GEN SUBTOT'.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            I_CALLBACK_PROGRAM = SY-REPID
            IS_LAYOUT          = L_LAYOUT
            IT_FIELDCAT        = IT_FIELDCAT
          TABLES
            T_OUTTAB           = IT_FINAL
          EXCEPTIONS
            PROGRAM_ERROR      = 1
            OTHERS             = 2.

  • How to change sub total value in ALV Grid.

    Hi All,
    Can u please explain how to change SUBTOTAL Value in ALV Grid display based on another field value.
    EX; F1 subtotal is  initial then we have to modify the F2 sub total to 9999.9.
    Thanks
    Radha.

    Hi Radha,
    I doubt if that can be changed....because the event that i was referring to in my previous post works with ALV List display...But in any case you can try that.....
    There is an event in SLIS....(As i told you, i dont remember the name and currently i dont have access to SAP system, so i am not able to verify and let you know that event name).....
    Other thatn TOP and END of PAGE events, there is an event for sub-total text......i think it would start with "SUBTOTAL"...
    you need to use that event in your events table and pass it to ALV Grid display.
    Then create a sub-routine with that name (As you do for TOP-OF-PAGE event)....and in this event you can change the values in runtime (PROVIDED, this event gets triggered for ALV GRID).....
    If this does not work, i think calculating sub-totals while you build the internal table would be a better option....(If you have time constraint....else you can do some more research on the same)........
    Best Regards,
    Ram.

  • Activation of sub-totals button in ALV grid

    hi experts
    Execute the module pool program BCALV_GRID_DEMO .in the o/p screen - how to activate the subtotals button explicitly.

    HI,
    Please refer the code below:
    *  ALV data declarations
      data: it_sortcat   type slis_sortinfo_alv occurs 1,
            wa_sort like line of it_sortcat.
    perform build_sortcat.
    *&      Form  build_sortcat
    *       Build Sort catalog
    FORM build_sortcat .
      wa_sort-spos      = 1.
      wa_sort-fieldname = 'EBELN'.
      wa_sort-SUBTOT    = 'X'. "subtotals any totals column by this field
    *  gd_sortcat-tabname
      APPEND wa_sort TO it_sortcat.
      wa_sort-spos      = 2.
      wa_sort-fieldname = 'EBELP'.
    *  gd_sortcat-tabname
      APPEND wa_sort TO it_sortcat.
    ENDFORM.                    " build_sortcat
    call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
                i_callback_top_of_page   = 'TOP-OF-PAGE'
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
                it_sort                 = it_sortcat
                i_save                  = 'X'
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
    Thanks,
    Sriram Ponna.

  • Can we display only sub totals on the alv grid output

    hi,
    can we display only the subtotals calculated on the grid display.it should display all the data it shpuld display only the subtotals of it.
    if yes can any one please give me the code for
    will be awarded with points.

    Hi Raju
    You can do that
    When you are doing fieldcatalog,comment ws_fieldcat-do_sum = 'x'.
    if you comment that it wont display totals.
    use sort
    i_sort type slis_alv...
    clear ws_sort.
    ws_sort1-spos = '1'<position of field>
    ws_sort-fieldname  = 'matnr'.
    ws_sort-up = 'x'.
    append ws_sort to i_sort.
    pass this i_sort to FM

  • How to print sub total text in ALV

    Hi All,
       I have a prblem in printing sub total text in ALV. I am passing the text for sub total in ALV layout to the field SUBTOTALS_TEXT. Even then the text is not displayed where as this is working for TOTAL with the field TOTALS_TEXT.
       Could any one provide me the solution please?
    Thanks & Regards,
    S.Lakshmi

    Hi Lakshmi,
    Please refer to the following code :
    report zalv10.
    type-pools: slis.
    data: g_repid like sy-repid,
    gs_print type slis_print_alv,
    gt_list_top_of_page type slis_t_listheader,
    gt_events type slis_t_event,
    gt_sort type slis_t_sortinfo_alv,
    gs_layout type slis_layout_alv,
    gt_fieldcat type slis_t_fieldcat_alv,
    fieldcat_ln like line of gt_fieldcat,
    col_pos type i.
    data: begin of itab,
    field1(5) type c,
    field2(5) type c,
    field3(5) type p decimals 2,
    end of itab.
    data: begin of itab1 occurs 0.
    include structure itab.
    data: end of itab1.
    data: begin of itab_fieldcat occurs 0.
    include structure itab.
    data: end of itab_fieldcat.
    Print Parameters
    parameters:
    p_print as checkbox default ' ', "PRINT IMMEDIATE
    p_nosinf as checkbox default 'X', "NO SELECTION INFO
    p_nocove as checkbox default ' ', "NO COVER PAGE
    p_nonewp as checkbox default ' ', "NO NEW PAGE
    p_nolinf as checkbox default 'X', "NO PRINT LIST INFO
    p_reserv type i. "NO OF FOOTER LINE
    initialization.
    g_repid = sy-repid.
    perform print_build using gs_print. "Print PARAMETERS
    start-of-selection.
    TEST DATA
    move 'TEST1' to itab1-field1.
    move 'TEST1' to itab1-field2.
    move '10.00' to itab1-field3.
    append itab1.
    move 'TEST2' to itab1-field1.
    move 'TEST2' to itab1-field2.
    move '20.00' to itab1-field3.
    append itab1.
    do 50 times.
    append itab1.
    enddo.
    end-of-selection.
    perform build.
    perform eventtab_build changing gt_events.
    perform comment_build changing gt_list_top_of_page.
    perform call_alv.
    form build.
    DATA FIELD CATALOG
    Explain Field Description to ALV
    data: fieldcat_in type slis_fieldcat_alv.
    clear fieldcat_in.
    fieldcat_ln-fieldname = 'FIELD1'.
    fieldcat_ln-tabname = 'ITAB1'.
    *FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
    fieldcat_ln-key = ' '. "SUBTOTAL KEY
    fieldcat_ln-no_out = ' '.
    fieldcat_ln-seltext_l = 'HEAD1'.
    append fieldcat_ln to gt_fieldcat.
    clear fieldcat_in.
    fieldcat_ln-fieldname = 'FIELD2'.
    fieldcat_ln-tabname = 'ITAB1'.
    fieldcat_ln-no_out = 'X'.
    fieldcat_ln-seltext_l = 'HEAD2'.
    append fieldcat_ln to gt_fieldcat.
    clear fieldcat_in.
    fieldcat_ln-fieldname = 'FIELD3'.
    fieldcat_ln-tabname = 'ITAB1'.
    fieldcat_ln-ref_fieldname = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
    fieldcat_ln-ref_tabname = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
    fieldcat_ln-no_out = ' '.
    fieldcat_ln-do_sum = 'X'. "SUM UPON DISPLAY
    append fieldcat_ln to gt_fieldcat.
    DATA SORTING AND SUBTOTAL
    data: gs_sort type slis_sortinfo_alv.
    clear gs_sort.
    gs_sort-fieldname = 'FIELD1'.
    gs_sort-spos = 1.
    gs_sort-up = 'X'.
    gs_sort-subtot = 'X'. ***CRUCIAL STATEMENT****
    append gs_sort to gt_sort.
    clear gs_sort.
    gs_sort-fieldname = 'FIELD2'.
    gs_sort-spos = 2.
    gs_sort-up = 'X'.
    *GS_SORT-SUBTOT = 'X'. **THIS SHOULD NOT BE UNCOMENTED*
    append gs_sort to gt_sort.
    endform.
    form call_alv.
    ABAP List Viewer
    call function 'REUSE_ALV_LIST_DISPLAY'
    exporting
    I_INTERFACE_CHECK = ' '
    I_BYPASSING_BUFFER =
    I_BUFFER_ACTIVE = ' '
    i_callback_program = g_repid
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = ' '
    i_structure_name = 'ITAB1'
    is_layout = gs_layout
    it_fieldcat = gt_fieldcat[]
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    it_sort = gt_sort[]
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT = 'X'
    I_SAVE = ' '
    IS_VARIANT =
    it_events = gt_events[]
    IT_EVENT_EXIT =
    is_print = gs_print
    IS_REPREP_ID =
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    tables
    t_outtab = itab1
    exceptions
    program_error = 1
    others = 2.
    endform.
    HEADER FORM
    form eventtab_build changing lt_events type slis_t_event.
    constants:
    gc_formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
    *GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
    data: ls_event type slis_alv_event.
    call function 'REUSE_ALV_EVENTS_GET'
    exporting
    i_list_type = 0
    importing
    et_events = lt_events.
    read table lt_events with key name = slis_ev_top_of_page
    into ls_event.
    if sy-subrc = 0.
    move gc_formname_top_of_page to ls_event-form.
    append ls_event to lt_events.
    endif.
    define END_OF_PAGE event
    READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
    INTO LS_EVENT.
    IF SY-SUBRC = 0.
    MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO LT_EVENTS.
    ENDIF.
    endform.
    form comment_build changing gt_top_of_page type slis_t_listheader.
    data: gs_line type slis_listheader.
    clear gs_line.
    gs_line-typ = 'H'.
    gs_line-info = 'HEADER 1'.
    append gs_line to gt_top_of_page.
    clear gs_line.
    gs_line-typ = 'S'.
    gs_line-key = 'STATUS 1'.
    gs_line-info = 'INFO 1'.
    append gs_line to gt_top_of_page.
    gs_line-key = 'STATUS 2'.
    gs_line-info = 'INFO 2'.
    append gs_line to gt_top_of_page.
    CLEAR GS_LINE.
    GS_LINE-TYP = 'A'.
    GS_LINE-INFO = 'ACTION'.
    APPEND GS_LINE TO GT_TOP_OF_PAGE.
    endform.
    form top_of_page.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = gt_list_top_of_page.
    write: sy-datum, 'Page No', sy-pagno left-justified.
    endform.
    form end_of_page.
    write at (sy-linsz) sy-pagno centered.
    endform.
    PRINT SETTINGS
    form print_build using ls_print type slis_print_alv.
    ls_print-print = p_print. "PRINT IMMEDIATE
    ls_print-no_print_selinfos = p_nosinf. "NO SELECTION INFO
    ls_print-no_coverpage = p_nocove. "NO COVER PAGE
    ls_print-no_new_page = p_nonewp.
    ls_print-no_print_listinfos = p_nolinf. "NO PRINT LIST INFO
    ls_print-reserve_lines = p_reserv.
    endform.
    <b>Please reward points if helpful.</b>
    Regards,
    Amit Mishra

  • Add another column under sub total column in alv

    hi guys,
    is there any way i can add a new column under sub total column in alv function and have my own calculation for it

    Hi Radha,
    I doubt if that can be changed....because the event that i was referring to in my previous post works with ALV List display...But in any case you can try that.....
    There is an event in SLIS....(As i told you, i dont remember the name and currently i dont have access to SAP system, so i am not able to verify and let you know that event name).....
    Other thatn TOP and END of PAGE events, there is an event for sub-total text......i think it would start with "SUBTOTAL"...
    you need to use that event in your events table and pass it to ALV Grid display.
    Then create a sub-routine with that name (As you do for TOP-OF-PAGE event)....and in this event you can change the values in runtime (PROVIDED, this event gets triggered for ALV GRID).....
    If this does not work, i think calculating sub-totals while you build the internal table would be a better option....(If you have time constraint....else you can do some more research on the same)........
    Best Regards,
    Ram.

  • How To avoid column heading for only total line in ALV list Display

    Hi,
    How To avoid column heading for only total line in ALV list Display.

    Hi,
    to change colunm header field catlog is built
    look at the example below
    Changing column text headers
    use this to change, hide, or alter the ALV columns
    CLEAR: gt_fcat.
    READ TABLE gt_fcat WITH KEY fieldname = 'TEXT1' " ***
    *TEXT1 is your field name
       ASSIGNING <gtfcat>.
    IF sy-subrc = 0.
       <gtfcat>-coltext   = 'Date Type'.
       <gtfcat>-no_out    = ' '.
       <gtfcat>-tooltip   = 'Date Type Text from IT0019'.
       <gtfcat>-seltext   = 'IT0019'.
    keep seltext to '' if u want to hide
    ENDIF.
    regards
    austin

  • How to get Grand Total Text in ALV GRID

    Hi Folks,
    I am able to get the SUBTOTAL TEXT .....But i need...
    How to get Grand Total Text in ALV GRID Display...
    Can any one give a Solution for this...

    Hi Surendar,
    Check out this code.. this is showing Total Text in Toal line in the very first column.
    REPORT  zsales_ord_det_1                        .
    TABLES: ztable_10.
    TYPE-POOLS: slis.
    DATA: BEGIN OF it OCCURS 0,
    srno(6) type c,
    name LIKE ztable_10-name,
    age LIKE ztable_10-age,
    END OF it.
    DATA : BEGIN OF it_temp OCCURS 0,
    name LIKE ztable_10-name,
    age LIKE ztable_10-age,
    END OF it_temp.
    DATA: i_fieldcat  TYPE slis_t_fieldcat_alv,
          wa_fieldcat TYPE  slis_fieldcat_alv.
    DATA: v_repid LIKE sy-repid,
           i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
           gs_layout TYPE slis_layout_alv,
           gd_layout TYPE slis_layout_alv,
           i_sort TYPE STANDARD TABLE OF slis_sortinfo_alv,
           wa_sort TYPE slis_sortinfo_alv.
    START-OF-SELECTION.
      v_repid = sy-repid.
      SELECT * FROM ztable_10 INTO TABLE it_temp.
      LOOP AT it_temp .
        it-srno = 'Total'.
        it-name = it_temp-name.
        it-age = it_temp-age.
        APPEND  it.
      ENDLOOP.
    END-OF-SELECTION.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
         i_program_name               = v_repid
         i_internal_tabname           = 'IT'
      I_STRUCTURE_NAME             =
      I_CLIENT_NEVER_DISPLAY       = 'X'
         i_inclname                   = v_repid
      I_BYPASSING_BUFFER           =
      I_BUFFER_ACTIVE              =
        CHANGING
          ct_fieldcat                  = i_fieldcat[]
       EXCEPTIONS
         inconsistent_interface       = 1
         program_error                = 2
         OTHERS                       = 3
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    wa_fieldcat-row_pos = 1.
    wa_fieldcat-col_pos = 1.
    wa_fieldcat-fieldname = 'SRNO'.
    wa_fieldcat-tabname = it.
    append wa_fieldcat to i_fieldcat.
      LOOP AT i_fieldcat INTO wa_fieldcat.
        IF wa_fieldcat-fieldname = 'AGE'.
          wa_fieldcat-do_sum = 'X'.
          MODIFY i_fieldcat FROM wa_fieldcat.
        ENDIF.
       IF wa_fieldcat-fieldname = 'SRNO'.
         Hide this field so that it can display it's content i.e.
            Total text in Subtotal level
        wa_fieldcat-tech = 'X'.
          wa_fieldcat-no_out = 'X'.
          MODIFY i_fieldcat FROM wa_fieldcat TRANSPORTING tech no_out.
       ENDIF.
      ENDLOOP.
    wa_sort-spos = 1.
    wa_sort-fieldname = 'SRNO'.
    wa_sort-up = 'X'.
    wa_sort-subtot = 'X'.
    APPEND wa_sort TO i_sort.
      gd_layout-no_totalline = 'X'.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                       = ' '
         i_callback_program                        = v_repid
      I_CALLBACK_PF_STATUS_SET     = ' '
    i_callback_user_command                = 'USER_COMMAND'
      I_CALLBACK_TOP_OF_PAGE         = ' '
      I_CALLBACK_HTML_TOP_OF_PAGE  = ' '
      I_CALLBACK_HTML_END_OF_LIST    = ' '
      I_STRUCTURE_NAME                       =
      I_BACKGROUND_ID                        = ' '
      I_GRID_TITLE                                  =
      I_GRID_SETTINGS                          =
         is_layout                                      = gd_layout
         it_fieldcat                                      = i_fieldcat[]
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
         it_sort                           = i_sort
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      I_HTML_HEIGHT_TOP                 =
      I_HTML_HEIGHT_END                 =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
        TABLES
          t_outtab                          = it
       EXCEPTIONS
         program_error                     = 1
         OTHERS                            = 2
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    Regards,
    Seema

  • Total Field in ALV Grid

    Can i change the values in total column in ALV Grid program. I had made one report with 3 hirerchy level and for first hirerchy i need different total values just for one column as total values are misleading the users. is it possible to change the value total field in ALV?

    hi
    make the fields for which u r displaying total as editable.
    so when ever u make changes in the column,
    see the sample code, i have done a similar program
    FORM DATA_CHANGED_MATRIX USING P_ER_DATA_CHANGED TYPE REF TO
    CL_ALV_CHANGED_DATA_PROTOCOL P_ONF4 type C E_UCOMM TYPE SY-UCOMM.
      DATA: VALUE LIKE YRECORDINGD_QDMS-SCORE.
      CLEAR VALUE.
      data: begin of wa_tot,
      TOTAL_SCORE like yrecordingd_qdms-score,
      end of wa_tot.
      DATA: BEGIN OF WA_DATA,
      SRNO type i,
      LOCATION LIKE YCONCERNS_QDMS-LOCATION,
      LOC_DESC LIKE YLOCATION_QDMST-LOC_DESC,
      TOTAL_SCORE LIKE YRECORDINGD_QDMS-SCORE,
      END OF WA_DATA.
      FIELD-SYMBOLS: <LS_VALUE1> TYPE ANY,
      <LS_VALUE2> TYPE ANY.
      DATA: L_VALUE TYPE LVC_VALUE,
      ls_mod_cell type lvc_s_modi.
      SORT P_ER_DATA_CHANGED->MT_MOD_CELLS BY ROW_ID.
      LOOP AT P_ER_DATA_CHANGED->MT_MOD_CELLS INTO LS_MOD_CELL.
        CALL METHOD P_ER_DATA_CHANGED->GET_CELL_VALUE
          EXPORTING
            I_ROW_ID    = LS_MOD_CELL-row_id
            I_FIELDNAME = LS_MOD_CELL-fieldname
          IMPORTING
            E_VALUE     = L_VALUE.
        VALUE = L_VALUE.
        IF VALUE < 100.
          READ TABLE <TEMP_TAB> INTO <TEMP_WA> INDEX LS_MOD_CELL-ROW_ID.
          MOVE-CORRESPONDING <TEMP_WA> TO WA_TOT.
          WA_TOT-TOTAL_SCORE = WA_TOT-TOTAL_SCORE + VALUE.
          MOVE-CORRESPONDING WA_TOT TO <TEMP_WA>.
          MODIFY <TEMP_TAB> FROM <TEMP_WA> INDEX LS_MOD_CELL-ROW_ID.
          CALL METHOD GO_GRID->REFRESH_TABLE_DISPLAY.
        ELSE.
              CLEAR WA_DATA.
        ENDIF.
        CLEAR:WA_TOT,VALUE.
      ENDLOOP.
    ENDFORM.

  • How to Increase Line space between two lines in ALV Grid

    hi,
    I want to increase the line space between any two lines in ALV GRID. Can anybody has solution for this issue.
    Regards,
    Madan

    Hi Madan
    It's not possible
    Regards
    Gregory

  • Color a line in ALV Grid Control

    <<Do not ask for or offer points>>
    Hi all,
    How to color a line in ALV Grid Control using OOPs.
    The appropriate replies will be rewarded.
    regards,
    S Philip
    Edited by: Matt on Dec 22, 2008 11:05 AM

    <<Points unassigned - cut and paste not allowed.  http://sgstocks.tripod.com/alvgrid_control.htm>>
    Hi,
    To color a line, the structure of the  table must include a  Char4 field  for color properties
    TYPES: BEGIN OF st_sflight.
            INCLUDE STRUCTURE zsflight.
          Field for line color
    types:  line_color(4) type c.
    TYPES: END OF st_sflight.
    TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
    DATA: gi_sflight TYPE tt_sflight.
    Loop trough the table to set the color properties of each line. The color properties field is
    Char 4 and the characters is set as follows:
    Char 1 = C = This is a color property
    Char 2 = 6 = Color code (1 - 7)
    Char 3 = Intensified on/of = 1 = on
    Char 4 = Inverse display = 0 = of
         LOOP AT gi_sflight INTO g_wa_sflight.
          IF g_wa_sflight-paymentsum < 100000.
            g_wa_sflight-line_color    = 'C610'.
          ENDIF.
          MODIFY gi_sflight FROM g_wa_sflight.
        ENDLOOP.
    Name of the color field
    gs_layout-info_fname = 'LINE_COLOR'.
    Grid setup for first display
    CALL METHOD go_grid->set_table_for_first_display
          EXPORTING i_structure_name = 'SFLIGHT'
                                 is_layout                = gs_layout
          CHANGING  it_outtab                 = gi_sflight.
    Regards,
    John
    Edited by: Matt on Dec 22, 2008 11:18 AM

Maybe you are looking for