Idle Processes, network timeouts ISL

Is there any way to determine the length of time a client or process has
been idle rather than merely if it is idle? How does the ISL determine
which connections have been idle when invoking it's network timeout value?
Regards,
Steven M. Hill

Thanks Per!
The T_CLIENT class contains a TA_IDLETIME function which returns the no.
of secs since a client last issued an ATMI call. I'm searching the
documentation for MIB programming but it's not that clear, so I'll have
to proceed by trial and error :-)
Steve Hill
plindstrom wrote:
Hello Steven,
I haven't worked with the ISL but if it is anything like the WSL I would try looking at the T_CLIENT class in the TM_MIB. There is an attribute called TA_IDLETIME which may be what you're looking for.
Hope this helps,
/Per
Per Lindstrom R2Meton AB, SWEDEN

Similar Messages

Error when processing Network

Dear all.
I create a sales order in tcode va01 and input a wbs element E-000009.1 in the field of WBS Element at Account assignment tab of one item detail.When save the sales order,sap pop up a message box with text "Sales order has no CO object".The detail message content was pasted at bottom.When confirm the first message box,sap pop up the second message box with text "Error when processing Network".The detail message content was pasted at bottom.
So I need the experts give me some useful advice and reference to resolve the problem.
Thank you.
Regards
Yoda
Sales order has no CO object
Message no. CO323
Diagnosis
The production order should be settled on the sales order.
The requirements type of the sales order, however, refers to an account assignment category that does not allow settlement using the sales order (key consumption posting).
Procedure
1. Check which requirements type in entered in the relevant sales order item
Display sales order
2. Check the settings for this requirements type in Customizing
(See Control sales order-related production).
Error when processing Network
Message no. V1380
Diagnosis
A technical error has occurred. On calling up the assembly interface, exception 2 was triggered. The exceptions have the following meanings:
1 = External block
2 = General error
3 = Insufficient data for the interface
4 = Order was not found
5 = Update has been rejected
6 = Final document number for Network is not issued
Procedure
Inform your system administrator.

Dear shashank.
Thanks for you reply.
1.I have checked the sales order and the requ. type was KMNP.In tran OVZH the requ. type KMNP use the ReqCl 202.In tran OVZG I checked the ReqCl 202 and the "Acct.assig.cat." was Q and the Consumption was P.
2.In tran cj20n I checked the wbs element.Its operative indicator was billing elements.
3.In tran mm03 I try to found the field of "req type / strategy".But I could not this field.Could you tell me the "req type / strategy" field was in which view?
Thank you so much.
Regards
Yoda

Repetitive "Exception during idle processing" log message from servermgrd

Hello,
I'm at my wit's end trying to find the answer to this issue, and I don't have any clue where to begin. In /var/log/system.log, I'm receiving the following message approximately once per minute:
Apr 17 13:51:21 www servermgrd\[83317\]: Exception during idle processing: * -\[NSCFDictionary setObject:forKey:\]: attempt to insert nil value (key: FilePath)
There are usually no other messages in the log near these errors; when other messages are nearby, they are self-explanatory and appear unrelated. The message never changes except for the time stamp and the process ID for servermgrd.
Any suggestions on where to begin would be extremely valuable. Thanks!

check with this:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14</a>

Network timeout only for library upgrade items

I purchased an upgrade of my library, which totals 430 songs. The purchase went through fine, but when I would try to "check for downloads" so I could download the items, I kept getting "network timeout" errors. I ran the diagnostics, and after sending a support request, I was told it was probably my third-party firewall (even though it was properly configured and I had always been able to download without a problem).
I uninstalled the firewall and related security software, and when I continued to have trouble I was advised to disable all startup items. I did that, and even disabled Windows Firewall (which also was properly configured for iTunes), and I continued to get the same result.
I re-enabled the startup items and the Windows Firewall, and, just as an experiment, I tried purchasing an album from the store. The purchase went through and the album immediately downloaded without a problem. After that, I tried again to "check for available downloads." (Incidentally, iTunes shows there are 430 downloads available.) I again got the same error.
It seems clear, at this point, that I am able to connect and download, but there is something wrong on the other end of this deal that is preventing me from downloading the music I paid for. I am getting extremely frustrated, because by now I have spent hours and hours trying to get the music I paid for.
Anyone else experience anything like this, where the "update library" purchases seem to be the only thing you can't get to?

I was finally able to have the issue bumped up to a Senior Tech, who was able to help me. According to him, some ISPs have a problem with very large downloads. Over the course of several days, we broke the library upgrade into smaller chunks, with him placing the songs into the queue.
We did have a further problem at one point where some of the "upgraded" songs were duplicates of the m4p files (rather than the unprotected files). We never figured out the problem there, but he re-placed all 430 of the upgraded songs in my download queue, and this time the whole set of 430 downloaded.
So I'm not sure why it would work that time, if it was my ISP causing the difficulty, but whatever. It only took about three weeks of work and a hundred bucks or so, but I now have the items able to be upgraded.
I have to give a big thumbs-up to the techs I finally dealt with when I took matters into my own hands and called AppleCare--going through the ExpressLane was useless and a waste of time. Notody even reads the emails--all you get are form replies telling you to do what you already say you have done.

Firefox Version 3.6.9 will support Mac OS X 10.8.5, as we are facing network timeout error after some time, we have checked all other settings

Firefox Version 3.6.9 will support Mac OS X 10.8.5, as we are facing network timeout error after some time, we have checked all other settings

We cant upgrade

Servermgrd Exception during idle processing: couldn't spawn task

Hello,
we recieve every 2 seconds the following message in the system.log
Sep 15 11:17:13 xxxxx servermgrd[100]: Exception during idle processing: couldn't spawn task: path = /usr/bin/ftpcount, errno 24
bash-3.2# /usr/bin/ftpcount
Service class realusers - 0 users ( 50 maximum)
Service class anonusers - 0 users ( 50 maximum)
don't know why this error occurs, anybody out there who knows whats happend there?
thx+cheers./c

Hi,
We're running Server 10.5.4 on a G4 Xserve.
Typically, our "once a week" problem is a failure of the DirectoryService process. Occasionally, our bootpd.plist file will revert to defaults and we lose all our DHCP settings.
Today, I got to experience one part of your problem - the inability to access the server via the Server Admin GUI and the server admin web site (https://localhost:311). Typically, we have that problem when DirectoryService fails, since we can no longer authenticate as a user of those services.
This time, I was surprised to find that authentication wasn't the problem.
Although I don't have a real fix for you, I was able to get servermgrd running again by simply quitting it from Activity Monitor.app. Launchd just restarts the service for you automatically. You should be able to accomplish the same thing with +killall servermgrd+. At the very least, this could save you from having to reboot.
If you're a scripter, you could probably write one that automatically does the killall for you when servermgrd goes flakey.
Regards,
Lyle Millander

System Idle process at Exchange server too high

Hi there everyone,
I am having an issue since a long period of time regarding the usage of CPU by system idle process at my exchange server 2010.I am hereby attaching the screenshots for more details.
What might be the issue guys as per your experience?
Regards,
Sufiyan

This one may help.
http://blogs.technet.com/b/maliks/archive/2012/04/25/exchange-2010-store-exe-service-takes-high-memory-utilization.aspx
or ask them more over here.
https://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchange2010
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Still gettting error 33162 despite increasing network timeouts

Hi All,
I have an application that frequently displays error code 33162. I followed the advice at http://digital.ni.com/public.nsf/allkb/C4E77D7E9BECBAFE86256C6200544289 and doubled my network timeouts to 4 seconds timeout and 10 seconds initial connect timeout. I still get the error however. When I get the error the block diagram briefly flashes on one of the blocks, but it's too fast to really see.
Any advice on how to solve this error condition?
Thanks,
Sean

Hi,
I am having the problem occur repeatedly again today. My fieldpoint hardware is cFP-2000. I am currently seeing repeated 33162 errors, so many that I have to stop my application.
The attached screenshot shows where the error is occuring. We'd really appreciate any advice on this problem. Our fieldpoint modules are located close to some heavy AC equipment, so hopefully the EM fields from this are not affecting them.
Thanks,
Sean
Attachments:
chassis2_error33162.jpg ‏137 KB

SYSTEM IDLE PROCESS SHOWING TOO MUCH CPU USAGE

I Have problem with system idle process showing too much cpu usage.but the process is normal.nothing more else.my laptop is toshiba satelite pro m300.pls give the solution as earliest as possible.

Without knowing the excat model or what software, hardware or external components are running CPU usage is just an average measurement. If you have alot of background components/software running can cause a high reading, as it you allowed updating to runn consistently, or IM Messenger to consistently gain access.

ITunes "network timeout" when I try to login

I can't authorize my laptops in Itunes because every time I try to login it comes back with a "network timeout" error. I cannot login to iTunes at all tonight. Anyone else? Running Windows 7 64.

Same with me. I can browse the store and try to buy an app but I get a connection timeout after it prompts me for my account password. I can't even purchase anything through my phone on the 3G link.

Network Timeout freezes InDesign

A Win7 SP1 64bit PC is running InDesign CS5, and while working on a file, a user experienced a "network connection" error, and then InDesign froze, with no chance of recovery.
Is there any way to prevent ID from freezing when a network timeout issue occurs?
Why does it need to freeze anyway? Why can't it simply halt whatever task it was trying to perform?

I think there is no question, scientifically or unscientifically, that we see far more reports of file corruption with networks than without.
Networks are complicated beasts, and they have many more possibly failure points than local disks do. (On the other hand, people with network storage are much more likely to have reliably backups; at least that's been true historically before the advent of both popular Internet-based backup and Apple's Time Machine). It's also the case that medium to large sites work almost exclusively with networks (though they may use database-driven document storage for which the traditional InDesign network-averse guidance may not apply), and they tend to deal with more documents than individuals do.
I think the single most definitive point in your favor of your position is this text from the CS5 help, Recommended workflow for InDesign documents:
You
can improve performance and prevent many problems by establishing
a good workflow to use with Adobe InDesign.
Open documents locally
Before you open
a document stored on a network volume or on removable media, copy
the document and any linked graphics to your local hard disk. The slower
access time and data transfer rate of a network volume or removable media
can cause data to become lost or corrupted, possibly damaging the document.
However, be aware of overriding someone else’s work if you copy
the local files back to a network server.
But that doesn't say networks are unsupported, it just says they may not be good.
But the person who wrote this was hopelessly naïve — network are a critical part of any modern business computer setup that is larger in scope than a sole proprietorship. And anyworkflow that expects users to copy files off the network to local disk and back is patently ludicrous. As the above acknowledges, copying them back is frought with peril.
Furthermore, the operating system vendors have expended no small effort to make networks mroe and more seamless and well-integrated, and to try to make them nearly indistiguishable from local disk—except. Except when they don't. Except when they can't. Except when applications need to know more about the underlying substrate of the filesystem, need better timing information, need to do things like memory-map files into RAM with guaranteed perforamance, etc. Though I am a bit skeptical that InDesign has any such needs...
Probably a good summary comes from a John Nack (Photoshop evangelist) blog post from 2008 (and networks have only become more popular), where he quotes an unnamed Adobe engineer, http://blogs.adobe.com/jnack/2008/06/filesaving_issu.html:
Directly writing to a network filing system adds a level of complexity,
which includes timing issues, network noise, performance, and other
potential issues. We’ve occasionally run into bugs with different
configurations/combinations, but as there are too many variants for us
to reliably test and certify all the clients, servers, hardware and
software, we recommend the safer course of working with files locally
and then copying them up to a file server when you’re done. While
directly reading/writing to network file systems should work in theory,
and while we do some limited testing in the most popular configurations
to verify that it does, we can not certify that it will work reliably in
your configuration.
But, of course, what do we mean by "support"? I am, by the way, interpretting your statement "not designed for working over networks," as "networks are not supported," and that may not be fair of me.
To me, "supported" means there is a reasonable expectation of the software working in the scenario, that Adobe will address bugs raised to them over the issue (rather than closing bugs saying, "at your own risk, sorry, bub!"), and Adobe will make a reasonable effort to keep it working. I think the situation with networks does qualify.
Unfortunately, it's hard to find anyone to say so. In part, I think, because there are so many variables nobody wants to be pinned down saying "it'll work" because you'll always eventually be able to point to a case where it won't. And the above blog post (part I didn't quote) talks about how a problem is really due to a bad interaction with Adobe product and MacOS X 10.5.3, which was later fixed by Apple.
Anyhow, we can also find plenty of evidence of Adobe having accepted and fixed bugs that relate to network behavior in InDesign. So I'm pretty confident that network use of InDesign si well-supported. But I certainly wouldn't say it was rock solid.
Hmm, this is kind of long. I will address the OP's issues in a seperate post.

Westell 327W Network Timeout

I'm having problems setting up Apache and SSH with my Westell 327W.
I have Verizon DSL -> Westell 327W Modem/Router -> Ubuntu Server with Apache Web Server and SSH Server.
The Ubuntu Server with apache and SSH is the DMZ Host.
Apache and SSH will work good for 5-10 minutes, then when you click on a link or do anything from the apache webpage... Firefox says Connecting to XXX.XXX.XXX.XXX, then it will say Page Load Error. Network Timeout. The server at xxx.xxx.xxx.xxx is taking too long to respond.
I putty (ssh) into the Ubuntu server, everything will work good for 5-10 minutes, then putty will freeze up and say Putty Fatal Error. Network error: Software caused connection abort.
Apache or SSH will NOT work for 1-2 minutes. Firefox will say Network Timeout and SSH will not connect at all.
Then, everything will work again for 5-10 more minutes... then go down for 1-2 minutes, over and over and over....
Where can I find help for the Westell 327W Custom Firewall Rules? I dont have a help section on my 327W and cant find any information about making my own custom firewall rules.
I've read my problem occurs because of my firewall rules. The router drops the session because it drops it out of the state table or something like that?!?!?!? But I thought setting a PC as the DMZ host would put it outside of the firewall and the firewall rules wouldnt apply to the DMZ host?!?!?!?
PLEASE HELP! Thanks!

Ok, I thought so.
#1 In you are using GNOME, go to System >> Admininstration >> Networking.
#2 In the general tab make sure your network card is active.
#3 Select your network adapter and press properties.
#4 Make sure your network card is enabled.
#5 Change the configuration from DHCP to static (OR if it is already set to static)...
#6 For the IP Addres, you can set any number that you want to but not: 0, 1, 15 to 47 OR 255.
Such as 192.168.1.6
#7 Enter in the Subnet Mask of: 255.255.255.0
#8 Enter in the default gateway of: 192.168.1.1
#9 In the DNS Tab, enter in the DNS Servers that you want to use.
b) If you desire to, you may enter in the DNS of 192.168.1.1
c) OR the DNS Server address(es) that are in one of your router's screens. Maybe at Advanced -> DNS ?
#10 In your router, forward to the IP Address that you have setup on your computer.
This should resolve the issue. If not, in your router go to Advanced... In Advanced, if you see anything about UPnP (Universal Plug and Play) go there.
If UPnP is turned in the router, I would recommend turning that feature off.
If in Advanced you do not see anything about UPnP, please show a screen shot of the Advanced Screen...
I state my source(s) about setting a Static IP.
a) URL: http://forum.portforward.com/YaBB.cgi?num=1116577357
Title/Location: portforward.com -> forum -> Knowledge Base -› How to choose a Static IP address
and..
b) http://forum.portforward.com/YaBB.cgi?num=1119584531
portforward.com -> forum -› Knowledge Base -› But WHY do I need a STATIC IP??
As to why turning off UPnP: Because it opens ports automatic in the router, and you can not have over lapping ports.
http://forum.portforward.com/YaBB.cgi?num=1123832523
portforward.com -> forum -› Knowledge Base -› How do I forward the SAME port to 2 Computers?
^^
Message Edited by dslr595148 on 07-01-2009 03:25 PM
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Trying to download ios5 to ipad and getting network timeouts also showing 15 hours to download. I have turned off firewall but still happening

I am trying to download the latest iOS 5 for my ipad and husbands iphone 4 but firstly it is coming up saying 17 hours then I am getting network timeouts!! I have turned off my firewall etc but still does the same. I have the latest iphone 4s and I am wanting to use cloud etc but can not due to this, can anyone help

Have you turned off all your firewall and antivirus software ? If that doesn't work then you could try downloading the iPad update via a browser : https://discussions.apple.com/message/16703914#16703914
And for the iPhone 4 :
GSM/sim based
CDMA i.e. Verizon

Network timeout (err = -3259) with iOS 5.0 update

When downloading the update for iOS 5.0 in iTunes, Win7 machine, and trying to update iPhone 4, it will get to the very end of the download and then give the network timeout error. This happens every single time, and after the file has already downloaded completely. The error code is (err = -3259).
This is a pain because the download is very slow, presumably because everyone is trying to update right now.

Ok, so the trouble I experienced was last week during the fury of downloading from iPhone users all over Earth. I left the problem alone from 10/14-10/18. This morning, I started again. Turned my pc on from it's previously "Shut Down" state, opened iTunes, connected the phone, attempted to DL iOS5. After 20 minutes, I got a similar message, however, this time it wasn't marked 'err-3259'. It said only verbiage to the effect of "the network timed out." I then disabled my Kaspersky and Firewall. Without hope and with much reluctance, I tried the DL again. After several minutes, while I was working on something else, I noticed my phone went into "sync" mode. The rest is history! The DL and updates completed and now the phone is working as it should with the updates (It's an iPhone 4). Lastly, I reinstated protection from Anti-virus and Firewall. Give this a try and I hope it works for you.

Network shared process variable timeout error

I am in the process of migrating my large application from LV10 to LV 11 and Stepped on this Barkers Nest.
Not O.K. Code
O.K. Code
I tried to isolate this error into a VI on it's own and the bug went away.
Has anyone else seen anything else like this
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT

I gave up trying to isolate the code .vi.
What I can tell you is that it most likely related to the number of Vi's in the block diagram.
There seemed to be a point where no matter which .vi I removed, the error would go away.
It didn't matter if the .vi was in a diagram disable or not, removing it, fixed the problem.
Maybe get the labview coding team to check the source code for:
#define MAXVISBEFOREANNOYINGCUSTOMER= ???
I can make arrangements for you to get my code, but as I said, it will need to be through official channels and not on the forum.
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT

Idle Processes, network timeouts ISL

Similar Messages

Maybe you are looking for