IDOC Orders05, conditions and storage location per position

Hello,
i have a question regarding WE19 and Orders05 IDOC. I tried to overwrite a pricing condition in the Segment E1EDP05. When i start the Idoc in WE19, i see the new condition placed in the order. Everything seems allright except the price of the material. It is always 0,00 - I put different values in the Idoc- always the same.
Another strange thing is the storage location (Field: LGOR). I also put the storage location into the Segment E1EDP01 in each position. When i debug the Idoc via WE19, the storage location is not filled in.
Thank you very much in advance,
regards,
Philipp

solution is posted in same thread in Abap General

Similar Messages

During MRP run unwanted plant and storage location include and exclude

Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.

HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.         1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK

How to get automatic plant and shipping point and storage location

hi,
sap gurus,
how to get automatic plant and shipping point and storage location automatically into the sales order
i have done all the config settings for that
but its not appearing automatically.
regards,
balaji.t

Hi
Balaji...
U can get the plant in sales order, by doing the default the same in customer master or in material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
For S loc u have to enter manually in the sales order u can not get it automatically.
Hope this will help you.
Thx.

Date Wise and Storage Location Wise Stock Qty & Value Report......

Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
Yusuf

Hi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK

Stock report in BW (valuated stock and Storage Location level)

Dear All,
            Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
Manythanks
Arun

HI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun

Sales order stock and storage location stock on past date with value

Hi everyone.
I m looking for a report which can give sales order stock with value as it is shown in mb5b and storage location stock with value as in mc.5 is there any report which can give the combination of both the things on past date with values.

can you tell me what shall be the fields and table for special stock on past date with value and sloc stock on past date with value

Plant and Storage Location determination at Item level during Copy control

Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup Bansal

Hello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh

SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY

i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

Material transfers between plants and storage locations report

Hello experts.
I´m looking for some help.
Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
Thanks for your help.

Hi,
Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
or if you want storage location stock many reports are available like MMBE, or MB53 etc.
Regards

Mandatory the Material Quantity and Storage Location Field in Order

Hi Expert,
Please advise. how can i set the Maintenance order,
If Material field is Filled
Then Mandatory the Quantity Field and Storage Location Field.
Thank You
Best Regards

Hello,
Please Use Below User Exits to get your Functionality
IWO10009 --->PM Order Check for 'Save' Event
CNEX0026--->general inspection of material
Regards,
Rakesh

MB5B Movment type and storage location is reset

When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Movement Type, I get a Message "Movement Type is reset" and then the entered Movement Type disappears from the selection criteria.
However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
Also, When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Storage Location, I get a Message "Storage Location is reset" and then the entered Storage Location disappears from the selection criteria.
However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
Please tell me why does this happen when the radio button "valuated Stock" is active ?

Dear All,
I am facing the problem as said in the thread.
My two queries are as follows:
Query 1: In MB5B report When we select the valuated stock option ,We are unable to use movement type , storage location in the selection criteria nad getting the below messages.
M7284 - Storage location is reset.
M7298 - Movement type is reset .
Query 2 :In MB5B report total receipts and total issues is showing incorrect values.
Here say for example I prepared the grn, cancelled the grn and again made the grn. Here total receipts is considering in such a way that all the grn quantities are considered. and cancelled documents are considered as issues.
ie have received material = 100 Nos 01-12-2009
cancelled grn:100 Nos
Redo grn:100 Nos
Done transfer posting 415 Q = 10 nOS = 02-12-2009
Issued = 10 nos = 02-12-2009
In mB5B 01-12-2009 to 02-12-2009
We are getting Opening stock= 0 which is correct
Total receipts = 100(GRN IST TIME)+100(GR SECOND TIME) +10(TRANSFER POSTING)=210
Total issues = 100(CANCEL GRN)10(TRANSFER POSTING)10(GOODS ISSUE) =120
Closing stock = 90(CORRECT)
Here actual recipt: should be 100
actual issue should be 10
Here though the closing stock is correct , 415 transfer posting is considered as issue and receipt.Becoz of this total issues quantity report is going wrong.
Please give your valuable suggestions to the above two problems seperately.
Regards,

Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          - Procurement type (maybe F)
          - Special procurement (Maybe U)
          - Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

Unable to set plant and storage location in Batch as required/mandatory

Hi Experts,
I am having a problem regarding field controls.
I would like to make plant and storage location as mandatory/required in MSC1N,MSC2N,MSC3N and MSC4N.
I have follow the path below
SPRO-logistics-general-batch management-bath master-field selection batch master-assign field to field groups
What i can see is field groups are being assigned to field name.
My question is, where do we go to to set the field group?
Thanks in advance!

Hi Dex,
You have gone to the right location.
On 'change view field control for batch master record' against each transaction like MSC1, MSC2,MSC3 and MSC4 there are number of dots '............'.
Double click on each dot against the transaction you want to modify. Each dot corresponds to different fields. Over here you can specify wheter you want to make the field required, optional etc.
Hope this helps.
Tarang

Creating material in multiple plants and storage locations

Hi Gurus,
I am wondering if someone could help me out in this issue,
I frequently get 1's and 2 materials creation requirement , is there any simple way , while creating material in MM01 , I could create/extend to all plants and storage locations.
I know we can use LSMW , but this is not bulk requirement,it is frequent but in 1or 2 nos.
Any help highly appriciated and rewared.
Thanks.

Hi,
To my knowledge I doubt if both MM17 & MM50 can meet your need, as MM17 is to mass change the values already existing in the MMR, while MM50 is to extend the views in a given plant & not to extend across plants.
A suggestion would be to use the BAPI's -
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
Give your requirement to your abaper & inform him / her to use the above BAPI's. I am sure your abaper can write a simple & user friendly program to meet your exact need.
Regards,
Vivek

Material deletion at plant and storage location deletion at plant

hI EXPERT,
We are going to extend the materials in plant A to plant B and C. So we will extend it using LSMW. After extending, we need to delete the materials in plant A and storage location in plant A. How can we do that? Please explain step by step.
Thanks

Hi,
If you want to delete material at storage location level
Enter MM17
Select table MARD
Select fields tab
find MARD-LVORM
Execute (F8)
Enter list of materials
Enter plant
enter storage location.
tick the field lvorm(carry out mass change)

IDOC Orders05, conditions and storage location per position

Similar Messages

Maybe you are looking for