If I shake windows of VI's, does not run the code.

I have many VIs called from a VI and thus run in parallel, a VI has a DLL that allows me to communicate via CAN. If I minimize and maximize windows to be changing the VI's or I shake the window, the communication CAN be lost for a moment (And it breaks my comunication system).
I use windows XP.
Some solution? Is this normal?
Thanks

Felipevv wrote:
I need to constantly change VI's because I have multiple VI's with control panels
I try to explain again:
I want that the global variable does not change until you take for example 0.5 sec changed:
0s-> IN: TRUE, OUT: TRUE
0.1s-> IN: FALSE, OUT: TRUE
0.2s-> IN: TRUE, OUT: TRUE
0.3s-> IN: FALSE, OUT: TRUE
0.4s-> IN: FALSE, OUT: TRUE
0.5s-> IN: FALSE, OUT: TRUE
0.6s-> IN: FALSE, OUT: TRUE
0.7s-> IN: FALSE, OUT: FALSE
Thanks.
I don't understand how it would help with your CAN problem, but does this do what you want?
Attachments:
halfsec.vi ‏9 KB

Similar Messages

Windows 8.1, BootCamp does not find the ISO image.

When I try to install Windows 8.1, BootCamp does not find the ISO image.
I purchased Windows 8.1 Pro, I downloaded the .exe requested file from a Windows computer, performed the steps recommended by Microsoft in order to create the ISO file saving it on a flash drive as well and, as a precaution, on a DVD too.
I performed the "Download the latest Windows Support Software from Apple" step directly into another flash drive and having it completed BootCamp displays the following message:
"The installer disc could not be found – Insert the Windows installer disc and wait a few seconds for the disc to be recognized. "
So happens that I have tried this using the DVD, pendrive and also copying the ISO file to the desktop and to the "Documents" folder as recommended in certain websites, but none of this has made the process go ahead. What can I do?
My equipment is a mid 2011 iMac running Mac OSX 10.10.1.

Dear Loner T,
thanks to my coworker, the solution was unpacking from that ISO file which I had recorded (according to the steps indicated by Microsoft), but now using Nero software (Windows) and then recording by the most common way in a new DVD. See the screen of the first DVD before unpacking:
This true saga only demonstrated that the generated ISO file as an option at the time of the Windows installation, is not for direct installation through BootCamp, and as a I could check, even for direct installation on a Windows PC. See the last DVD burned using Nero and again recorded:
The execution of BootCamp, was perfect
Thank you for attention to my problem!

Windows 7 in bootcamp does not recognize the wifi and usb

i have just made the bootcamp with Win7. it does not recognize the wireless driver and the high resoltion screen.
plus every time i have set the right click of trackpad.
could any one help me in solving this issue?
is there any way to upgrade the bootcamp driver from 3.0 to 3.3 without passing through 3.1 and 3.2?

You might wan't to ask in the Boot Camp forum where the Boot Camp gurus hang out.
https://discussions.apple.com/community/windows_software/boot_camp
It sounds like you have not yet completed the Windows installation process by installing the Windows drivers.

Itunes for Windows 7 64 bit does not recognise the iPhone 3G

I have just installed windows 7 x64bit on my pc. I have downloaded the itunes for windows 7 x64 and it seems to have installed correctly. I have reset my iphone (as my old one packed up with the home button, so Apple replaced it as it was still within the warrenty)and now when I connect the newly formated iphone to itunes, I get the following error,"this phone cannot be used as the required software is not installed. Run the itunes installer to remove itunes, then install the 64 bit version of itunes"???? i am assuming that the itunes download 'iTunes64Setup.exe' is the correct installer package for the 64bit version of windows7?
does anyone have any ideas of this, I am really missing my iphone.

now nothing happens when I connect the iPod by USB - it's not even charging.
Do you have a laptop, Nin?
If so, the following document might be of some assistance with that:
[iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
(That issue seems to match your recognition and charging symptoms.)

Captivate 7 does not run the exe on windows xp

We are using adobe captivate 7 installed (trail version ) in a windows 7 with SP1 computer . when we publish it and run exe in the windows XP (home ) under administrator we get following error even if the flash player is updated.
"" The installed version of Flash Player is not the latest. The latest Flash Player version has been installed successfully without affecting your existing Flash Player installation. Double-click the EXE again to run it.""
when we click OK it disappears and when we run the exe for the next time it runs . whereas if we run the same exe in the other user (not having admin permission ) also gets the same error and after clicking OK if we run exe again it shows the same error message again and again .
we have tested in win 7, win 8 , win server 2012 it works fine.
please suggest me why it comes and how to prevent it .

Installing on Windows is pretty simple, unless there is something that prevents the java environment from starting the console. Check the path environment variable and make sure there are no other jdk mixed. Check that the windows security doesn't prevent the oui console from starting, it happens that the windows security blocks java applications, and if you asked it to do it by clicking accept, then it won't start.
~ Madrid
http://hrivera99.blogspot.com/

Labview 8.5 application builder .exe does not run.The same source code runs ok.

Hi,
I have an application built in labview 8.5 application builder using windows XP. I have one instrument connected in gpib and one connected to a serial port. The source code runs ok but when I build an executable of teh same code and try to run it, it doesnt run the instrument connected to the serial port. It does communicate with the gpib port. Any ideas why this would be happening?
Steven

Additional to Britoa's reply: Did you add the serial commuication (drivers) when you built the application?

On board program does not run the motor to new positions yet commands to state of digital I/O in the same program line.

I am controlling a stepper motor position via a PIC-7342 board. This part of the program has worked in the past. I have another program that does almost the same thing and it works as always.
The program sets the speed and accelerations, then sets a position and tell the motor to run to the position. Then it sets a communication bit through the MCS register. Then it sets a new position and command the motor to run to the new position. It then delays a short time and commands an output to turn on. Then it sets a new position and commands the motor to run to the new position. After each command to run there is a wait for motion complete. The code used to work correctly. Now the motor runs to the first position and proceeds no further. The finial position is sometimes a couple of steps past the setpoint, which is very unusual. The digital output is fired like the second position has been reached, even though the motor has not moved to the position. The actual path for the motor is clear, so there is not mechanical reason for the problem. How would you troubleshoot an on board program?

ITElearner,
What has changed since you last ran your system? Can you move the motor in Measurement & automation explorer? Are you getting any errors? Is this program written in LabVIEW? You may also find the following useful:
Configuring a Motion Control System
http://zone.ni.com/devzone/cda/tut/p/id/3126
Configure and Test a Stepper Motor
http://digital.ni.com/public.nsf/allkb/9675C83F037811F68625727C0002A4A5?OpenDocument
Regards,
Sam K
Applications Engineer
National Instruments
www.ni.com/support

"Save a copy" does not run the JavaScript defined for AA WS/DS

I'm displaying the pdf in browser (IE) and need to audit the user saving the file (e.g. from the floating toolbar's "Save a copy"). However, the script inserted to run on Additional Action Did Save/Will Save is not invoked (the script and the structure of the document are ok because I'm doing the exact same thing for Did Print and works just fine).
So it looks like "Save a copy" is not "Save" .
Any idea on how to work around this?
Thanks,
Radu

Thanks a lot for the quick answer.
I'm "injecting" in the pdf some JavaScript to run on AA+DS (ie. this.submitForm(<servlet>Action=Save#FDF)... so that I "know" when the user saves the pdf and I can do my auditing stuff). To my surprise the JavaScript is not executed when the user "Saves a Copy".
The point about printing is that the script and document structure are correct since I'm calling this.submitForm(<servlet>Action=Print#FDF) on AA+DP to audit printing of the same document and works.
Radu

Parallels Desktop does not run - the application parallels desktop quit

Keep getting the popup error "The application Parallels Desktop quit unexpectedly" Ignore report or relaunch. I have reinstalled parallels numerous times to no avail. I have reported this issue numerous times to Mac over the last couple months and nothing yet.
Is the application conflicting with something or does it just not work. I have also went to the parallels website and got the latest version.
Any help or guidance greatly appreciated.

I had the same frustrating problem. I found the answer here and it worked perfectly!
First I ran the uninstaller from my original Parallels Desktop 3.0 for Mac cd and got rid of the application completely.
Then I went to http://forum.parallels.com/pda/index.php/t-22328.html and looked at the post for 8/13/2008 10:28 PM
It says:
Build is to old
Please download build 5608 following link bellow:
http://download.parallels.com/v3/en/GA/Parallels-Desktop-5608-Mac-en.dmg
and reinstall Parallels Desktop as described in kb
http://kb.parallels.com/en/4790
As per directions, I repaired the disk permissions.
Then as per the directions, I downloaded the build 5608 which is a Parallels Desktop 5608 application installer.
Lastly, you should know that I did NOT follow the directions for the terminal section. I was not comfortable messing around in there. I skipped it, ran the Parallels Desktop 5608 installer and I was up and running very quickly. Even though I skipped the terminal step, it works perfectly. I think it's because the uninstaller had already deleted the files that were referred to in the terminal directions.
J.A.L.

Query does not display the code.

Hi Experts,
I created a query joining SKA1 and SKB1 with the following requirements:
Query of the chart of accounts total for each company code with the following additional information:
- reconciliation list: yes or no / for which sub-ledger (cutomer, accounts payable, assets or others)
- binding on interim transaction: yes or no.
I have successfully created a query but instead of displaying the code (for example AA01-company code) the name of the company was displayed.(example: ABS Company) this is also the same with other fields like the GL account, instead of displaying the numerical value, the text description was displayed even if I have selected the correct field assignment (SKB1-BUKRS).
Your inputs are very much appreciated. thanks in advance!

Hi,
Are you creating this query under SQVI TCode?
Because when i am doing the same thing... its working. i can see he company code coming up as AA01.
SKB1-BUKRS is for Company code number... then how it can display Company code Description.
Best Regards
Guneetinder

HT4528 I just bought an IPhone 4s and when I plug it into my Windows 7 Toshiba it does not recoginze the phone...I have already removed the ITunes software along with the rest of the software and reinstalled...no go.I want to transfer phone video to my co

I just bought an IPhone 4s and plugged it into my Toshiba Windows 7 (64 bit) OS and it failed to recognize the phone. I checked in the tech community and discovered that I need to remove all the software assoicated with the phone and start over....I followed the sequence exactly...reinstalled the software and it still doesn't work. I am trying to download the IPhone 4s video to my computer and without a USB interface that works my memory capactiy will fill up fast....I've already been into the control panel....stopped and restarted the Apple service....I am stuck...can anyone offer some suggestions or knwo if there is a fix for this issue..??
Thanks,
Eric

I solved my own problem....I simply moved the cable to another port while moving the mouse to the USB ports on the opposite side of the computer....and the computr finally recognized the phone...I know it sounds weird but it worked...so if you are having the same problem that had trying removing all the crap you have plugged into the USB ports on your computer THEN plug in your IPhone 4s...use the cable that came with the phone and nothing else...good luck..>!!!

Since installing 3.6.12, firefox crashes continuously...I have gone back to Windows Explorer because firefox does not run anymore. Upon any actioin in firefox, the screen goes white and freezes and I get an error message saying firefox has stopped working

just about any action in firefox will cause a "WHITE SCREEN" freeze up and then an error message stating that firefox has stopped working. This happens in EVERY sessioin of firefox.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

The "send link" feature only opens my windows live mail. it does not open the new message or transfer the link

windows 7
currently using firefox 5 but problem occurred with version 4
windows live mail

Thanks Jason, I had the same problem and did exactly the steps above. Problem solved! You rock! :)

HT5016 Quicktime 7.7.1 (1680.42), does not run the video only the sound on a Web page

Quicktime Pro 7.7.1 (1680.42) when pasted the Header and Body Text into the Web Page only the sound is heard, no video Dreamweaver shows errors in the [Resources/stylesheets/qtp_library.css] line for Windows Explorer, Firefox, and Safari

Go to Start>Settings>Control Panel. Open The QuickTime control panel, click on the Browser tab, click on MIME Settings. Click on + to expand Miscellaneous-Miscellaneous file formats, uncheck Flash media. Click OK Apply OK and restart the browser for the change to take affect.
You are more than likely recieving the ? because the website is using Macromedia Flash Player, maybe now called Adobe. The lastest version of Flash Player is 9, this site will tell you what version is currently on the computer.
http://www.macromedia.com/software/flash/about/

Group Policy Startup Script Applies My Policy But Does Not Run The Acual Scripts

I have created a basic batch file with msiexec.exe to uninstall a program on startup and then another separate .bat script to install the same program but the newer version. The software I'm referring to has to be completely uninstalled BEFORE
I install the "newer" version of the same program, it cannot just be overwritten. If I run a gpupdate /force on the client computer and restart, the scripts run as they are supposed to and everything works but the problem is that I can't get it to
run on first boot on a computer that has been turned off for months, even after multiple reboots it still doesn't run the scripts. The 3 policies apply to the different computers/users but the scripts don't run. I manage a theme park that is
only open 4 months of the year so the rest of the time the in park PC's are turned off. I have created my OU as "POS Computers & Users" which has all of the computers and users that will take this policy. I also have 3 Group Policy
Objects attached to this OU in Group Policy, 1 is the program uninstallation .bat script policy that runs on startup, 2 is the install .bat script policy that runs after the uninstallation script, and 3 is the Default Policy for the OU. I already have the
"Always wait for the network at computer startup and logon", "Run startup scripts visible"enabled, "Run startup scripts asynchronously" disabled, and "Run Logon Scripts Synchronously" enabled for all 3 of the
policies. They are all "link enabled" and security filtering is set to only the OU I mentioned earlier so that it doesn't affect anyone else. I have the link order set as the script I want to run first as the last and the one I want to run last first
because from what I understand inheritance is from bottom to top. The install file is accessible by everyone with full permissions on our "Shared" drive so I know its not a permissions issue because it runs after a gpupdate /force with a restart.
The scripts are in the proper folder for the policies they are attached to and permissions are fine.
Here is my uninstall .bat script (msiexec.exe /X{14324A6A-BDD1-4F40-8E77-664C8AEEA251} /forcerestart /qb-! ALLUSERS=1 REMOVE=ALL)
Here is my install .bat script (msiexec.exe /i {\\kksrvad\shared\Gatemaster\NewGatemaster.msi} /qb ALLUSERS=1)

Can't be done in a login script.
This is a Group Policy issue and not a scripting issue. You do not have a script. You have a command saved in a batch file and you are using a GPO. Not a scripting issue.
¯\_(ツ)_/¯

If I shake windows of VI's, does not run the code.

Similar Messages

Maybe you are looking for