Implementation for generic service emp_wagetype is missing while using HCM
Hi all,
For a Badi y_essmss_wagetype_03 i have created a filter named y_emp_wagetype.. When i am using this filter in the back-end services and try to see the services fields for this filter it is throwing the error..
Implementation for generic service y_emp_wagetype is missing
Please suggest.
Thanks
Pradeep
Edited by: Pradeep on Oct 6, 2008 10:25 AM
Still pending
Similar Messages
-
This really ***** that they sent out and update to the iPhone ISO6 and I can't send or receive pics! Being that its apple you would think they would know better than to send out a bad update like this! I'm paying for a service and I can even use now!!! I'm very upset! Think about canceling my iPhone 5 order! This is terrible!
Wahhhhhhhhhh! Wahhhhhhhhhh!
Are you over your little tantrum now? Do you want help you would like to continue to act like a toddler?
If you want help, try telling us what happens when trying to send pics. Any errors?
If you want to whine... go somewhere else. -
SAP Implementation for Media Services
Hi all,
Is there any best practise or some kind of guide to implement SAP for Media Services like printing, radio ,music, TV/broadcast, animation/games etc.....
If you have any kind of document or material or sites please share with me.
points will be given
ThxHi,
this is for sure a type of question that can be answered by using the search or checking http://help.sap.com. Additionally as already mentioned, it is against the rules to ask for or offer points.
Therefore the thread will be locked.
regards
Siggi -
Hi all,
when i am trying to upload the excel template by using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" to an internal table some field values are missing.
i am using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" and i am uploading an excel template and downloading that excel data into an internal table but some field values are missing while uploading the excel template and i found that the field which contains the drop down list values those values are missing.
And also when i am uploading the excel template by using the function module" KCD_EXCEL_OLE_TO_INT_CONVERT" when i am coming out of this function module one pop up is coming. how can i avoid this popup, can any one please provide me the solution thanks in advance.
FYI...it is showing the below popup screen ..
Thanks,
Koushikhi Feiyun,
below is the code(highlighted in bold)and after coming out of the function module i am getting popup and also the drop down values are missing.
DATA: ls_control TYPE zsfi_fiupload_control,
ls_header TYPE zsfi_fiupload_header_v13,
ls_item TYPE zsfi_fiupload_item_v13,
ls_trailer TYPE zsfi_fiupload_control,
l_line_count LIKE zsfi_fiupload_control-rec_count,
l_current_curr TYPE kcde_cells-value,
l_current_postdate TYPE kcde_cells-value,
l_current_compcode TYPE kcde_cells-value,
l_currentrow TYPE kcde_cells-row,
l_filename LIKE rlgrap-filename.
DATA: BEGIN OF lt_intern OCCURS 0.
INCLUDE STRUCTURE kcde_cells.
DATA: END OF lt_intern.
DATA: BEGIN OF lt_items OCCURS 0,
a TYPE kcde_cells-value,
b TYPE kcde_cells-value,
c TYPE kcde_cells-value,
d TYPE kcde_cells-value,
e TYPE kcde_cells-value,
f TYPE kcde_cells-value,
g TYPE kcde_cells-value,
h TYPE kcde_cells-value,
i TYPE kcde_cells-value,
j TYPE kcde_cells-value,
k TYPE kcde_cells-value,
l TYPE kcde_cells-value,
m TYPE kcde_cells-value,
n TYPE kcde_cells-value,
o TYPE kcde_cells-value,
p TYPE kcde_cells-value,
q TYPE kcde_cells-value,
r TYPE kcde_cells-value,
s TYPE kcde_cells-value,
t TYPE kcde_cells-value,
u TYPE kcde_cells-value,
v TYPE kcde_cells-value,
w TYPE kcde_cells-value,
x TYPE kcde_cells-value,
y TYPE kcde_cells-value,
z TYPE kcde_cells-value,
aa TYPE kcde_cells-value,
ab TYPE kcde_cells-value,
ac TYPE kcde_cells-value,
ad TYPE kcde_cells-value,
ae TYPE kcde_cells-value,
af TYPE kcde_cells-value,
ag TYPE kcde_cells-value,
ah TYPE kcde_cells-value,
ai TYPE kcde_cells-value,
AJ TYPE KCDE_CELLS-VALUE,
AK TYPE KCDE_CELLS-VALUE,
END OF lt_items.
l_filename = p_flpath.
* the file must be an xls file, not xlsx or comma seperated
IF p_flpath NS '.xls' AND p_flpath NS '.XLS'.
MESSAGE i261(zfi).
g_error = 'X'.
EXIT.
ENDIF.
* upload excel file to a generic table
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename = l_filename
i_begin_col = 1
i_begin_row = 1
i_end_col = 150
i_end_row = 65000
TABLES
intern = lt_intern
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* validate that the format is in the restatement format
* this is the only template to have the ledger group in cell G-2
** READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
** IF sy-subrc <> 0 OR lt_intern-value IS INITIAL.
** MESSAGE i260(zfi).
** g_error = 'X'.
** EXIT.
** ENDIF.
* create control record values
ls_control-rec_type = 'C'.
ls_control-global_id = 'GLU-03000'.
ls_control-local_id = ''.
ls_control-rec_count = ''.
CONCATENATE sy-datum sy-uzeit INTO ls_control-date.
ls_control-version = '12'.
ls_control-email = ''.
ls_control-eor = 'X'.
ls_trailer = ls_control.
* open output file and add the control record
OPEN DATASET p_unixfilename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
TRANSFER ls_control TO p_unixfilename.
* create header record values, will be transfered to file in the item loop
ls_header-rec_type = 'H'.
READ TABLE lt_intern WITH KEY row = '0017' col = '0003'.
IF sy-subrc = 0.
ls_header-header_txt = lt_intern-value.
ENDIF.
READ TABLE lt_intern WITH key row = '0020' col = '0002'.
IF sy-subrc = 0.
ls_header-comp_code = lt_intern-value.
ENDIF.
************doc date
READ TABLE lt_intern WITH KEY row = '0011' col = '0003'.
IF sy-subrc = 0.
ls_header-pstng_date = lt_intern-value.
ENDIF.
************posting date
ls_header-doc_date = sy-datum.
READ TABLE lt_intern WITH KEY row = '0009' col = '0003'.
IF sy-subrc = 0.
ls_header-doc_type = lt_intern-value.
ENDIF.
READ TABLE lt_intern WITH KEY row = '0014' col = '0003'.
IF sy-subrc = 0.
ls_header-ref_doc_no = lt_intern-value.
ENDIF.
************currency moved to line items
READ TABLE lt_intern WITH KEY row = '0020' col = '0001'.
IF sy-subrc = 0.
ls_header-currency = lt_intern-value.
ENDIF.
ls_header-trans_date = ''.
READ TABLE lt_intern WITH KEY row = '0010' col = '0003'.
IF sy-subrc = 0.
ls_header-period = lt_intern-value.
ENDIF.
READ TABLE lt_intern WITH KEY row = '0006' col = '0003'.
IF sy-subrc = 0.
ls_header-reason_rev = lt_intern-value.
ENDIF.
READ TABLE lt_intern WITH KEY row = '0007' col = '0003'.
IF sy-subrc = 0.
ls_header-rev_date = lt_intern-value.
ENDIF.
* READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
* IF sy-subrc = 0.
ls_header-ledger_grp = ''.
* ENDIF.
* READ TABLE lt_intern WITH KEY row = '0013' col = '0013'.
* IF sy-subrc = 0.
ls_header-exch_rate = ''.
* ENDIF.
READ TABLE lt_intern WITH KEY row = '0008' col = '0003'.
IF sy-subrc = 0.
ls_header-calc_tax = lt_intern-value.
ENDIF.
ls_header-eor = 'X'.
* loop at the line items and append them to a table with multiple columns
LOOP AT lt_intern WHERE row GE 20.
IF l_currentrow <> lt_intern-row AND l_currentrow IS NOT INITIAL.
APPEND lt_items.
CLEAR lt_items.
ENDIF.
l_currentrow = lt_intern-row.
CASE lt_intern-col.
WHEN '0001'. lt_items-a = lt_intern-value.
WHEN '0002'. lt_items-b = lt_intern-value.
WHEN '0003'. lt_items-c = lt_intern-value.
WHEN '0004'. lt_items-d = lt_intern-value.
WHEN '0005'. lt_items-e = lt_intern-value.
WHEN '0006'. lt_items-f = lt_intern-value.
WHEN '0007'. lt_items-g = lt_intern-value.
WHEN '0008'. lt_items-h = lt_intern-value.
WHEN '0009'. lt_items-i = lt_intern-value.
WHEN '0010'. lt_items-j = lt_intern-value.
WHEN '0011'. lt_items-k = lt_intern-value.
WHEN '0012'. lt_items-l = lt_intern-value.
WHEN '0013'. lt_items-m = lt_intern-value.
WHEN '0014'. lt_items-n = lt_intern-value.
WHEN '0015'. lt_items-o = lt_intern-value.
WHEN '0016'. lt_items-p = lt_intern-value.
WHEN '0017'. lt_items-q = lt_intern-value.
WHEN '0018'. lt_items-r = lt_intern-value.
WHEN '0019'. lt_items-s = lt_intern-value.
WHEN '0020'. lt_items-t = lt_intern-value.
WHEN '0021'. lt_items-u = lt_intern-value.
WHEN '0022'. lt_items-v = lt_intern-value.
WHEN '0023'. lt_items-w = lt_intern-value.
WHEN '0024'. lt_items-x = lt_intern-value.
WHEN '0025'. lt_items-y = lt_intern-value.
WHEN '0026'. lt_items-z = lt_intern-value.
WHEN '0027'. lt_items-aa = lt_intern-value.
WHEN '0028'. lt_items-ab = lt_intern-value.
WHEN '0029'. lt_items-ac = lt_intern-value.
WHEN '0030'. lt_items-ad = lt_intern-value.
WHEN '0031'. lt_items-ae = lt_intern-value.
WHEN '0032'. lt_items-af = lt_intern-value.
WHEN '0033'. lt_items-ag = lt_intern-value.
WHEN '0034'. lt_items-ah = lt_intern-value.
WHEN '0035'. lt_items-ai = lt_intern-value.
when '0036'. lt_items-aj = lt_intern-value.
when '0037'. lt_items-ak = lt_intern-value.
ENDCASE.
ENDLOOP.
APPEND lt_items.
* sort rows by the post date, comp code, curr.
* SORT lt_items BY ah a ai.
* loop at the items, creating a header record if the comp code, curr. or post date changes
LOOP AT lt_items.
ls_item-rec_type = 'I'.
ls_item-post_key = lt_items-c. "lt_items-b.
IF lt_items-c GE '20' AND lt_items-c LE '39'.
ls_item-vendor_no = lt_items-d.
ELSEIF lt_items-c GE '0' AND lt_items-c LE '19'.
ls_item-customer = lt_items-d.
ELSEIF lt_items-c EQ '70' AND lt_items-c EQ '75'.
ls_item-asset = lt_items-d.
ELSE.
ls_item-gl_account = lt_items-d.
ENDIF.
ls_item-asset_type = lt_items-m. "lt_items-l.
ls_item-trans_type = lt_items-n. "lt_items-m.
ls_item-print_flag = ''.
ls_item-item_text = lt_items-j. "lt_items-i.
ls_item-comp_code = lt_items-b. "lt_items-a.
ls_item-bus_area = ''.
ls_item-alloc_nmbr = lt_items-l. "lt_items-k.
ls_item-tax_code = lt_items-q. "lt_items-p.
ls_item-taxjurcode = lt_items-r. "lt_items-q.
ls_item-profit_ctr = lt_items-g. "lt_items-f.
ls_item-costcenter = lt_items-h. "lt_items-g.
ls_item-orderid = lt_items-ac. "lt_items-ab.
ls_item-wbs = lt_items-i. "lt_items-h.
ls_item-trade_id = lt_items-o. "lt_items-n.
ls_item-part_prctr = lt_items-p. "lt_items-o.
ls_item-material = lt_items-t. "lt_items-s.
ls_item-salesorg = lt_items-aa. "lt_items-z.
ls_item-distr_chan = lt_items-ab. "lt_items-aa.
ls_item-pmnttrms = ''.
ls_item-pmtmthd = ''.
ls_item-pmtmthsupl = ''.
ls_item-alt_payee = ''.
REPLACE ALL OCCURRENCES OF '(' IN lt_items-e WITH ''.
REPLACE ALL OCCURRENCES OF ')' IN lt_items-e WITH ''.
ls_item-amt_doccur = lt_items-e. "lt_items-d
REPLACE ALL OCCURRENCES OF '(' IN lt_items-f WITH ''.
REPLACE ALL OCCURRENCES OF ')' IN lt_items-f WITH ''.
ls_item-loc_amt = lt_items-f. "lt_items-e
ls_item-loc = lt_items-k. "lt_items-j.
ls_item-sas_revtype = lt_items-s. "lt_items-r.
ls_item-rev_type = lt_items-u. "lt_items-t.
ls_item-rev_chnl = lt_items-v. "lt_items-u.
ls_item-bill_to = lt_items-x. "lt_items-w.
ls_item-payer = lt_items-z. "lt_items-y.
ls_item-ship_to = lt_items-y.
ls_item-tax_amnt = lt_items-x.
ls_item-func_area = ''.
ls_item-expend_date = lt_items-ae. "lt_items-ad.
ls_item-wtax_code = lt_items-af. "lt_items-ae.
ls_item-wtax_base = lt_items-ag. "lt_items-af.
ls_item-wtax_amount = lt_items-ah. "lt_items-ag.
ls_item-payment_block = ''.
ls_item-grp_amt = ''.
ls_item-anc_amt = ''.
ls_item-permit_payee = ''.
ls_item-value_date = ''.
ls_item-pernr = ''.
ls_item-legacy1 = ''.
ls_item-legacy2 = ''.
ls_item-legacy3 = ''.
ls_item-legacy4 = ''.
ls_item-legacy5 = ''.
ls_item-legacy6 = ''.
ls_item-legacy7 = ''.
ls_item-legacy8 = ''.
ls_item-legacy9 = ''.
ls_item-legacy10 = ''.
ls_item-eor = 'X'.
TRANSLATE lt_items-ai TO UPPER CASE.
TRANSLATE lt_items-b TO UPPER CASE.
TRANSLATE lt_items-a TO UPPER CASE.
TRANSLATE lt_items-aj TO UPPER CASE.
IF l_current_curr <> lt_items-a "lt_items-ai
OR l_current_postdate <> ls_header-pstng_date "lt_items-aj
OR l_current_compcode <> lt_items-b.
l_current_curr = lt_items-a.
l_current_postdate = ls_header-pstng_date. "lt_items-aj.
l_current_compcode = lt_items-b.
ls_header-comp_code = l_current_compcode.
ls_header-currency = l_current_curr.
ls_header-pstng_date = l_current_postdate.
ls_header-doc_date = l_current_postdate.
TRANSFER ls_header TO p_unixfilename.
l_line_count = l_line_count + 1.
ENDIF.
TRANSFER ls_item TO p_unixfilename.
l_line_count = l_line_count + 1.
ENDLOOP.
ls_trailer-rec_type = 'T'.
ls_trailer-rec_count = l_line_count.
TRANSFER ls_trailer TO p_unixfilename.
CLOSE DATASET p_unixfilename.
* change the format to fixed format for the remainder of the load program
p_fixed = 'X'.
p_rstmnt = ''.
Thanks,
Koushik -
Heres the setup: I have an IOS 7 iPad 2 that I want to use 3G only for web searches/ emails while using an Airport Express generated wifi bubble (without any connected internett) to print web seraches via airprint to a wifi printer.
The problem: the ipad deafults to searching via the AE's wifi and vainly waits for the non existent interent to connect. It ignores the available 3G internet.
The workaround: a) turn off the AE's wifi, search the web via 3G b) once I have something to print, turn the wifi back on and print via airprint and the AE's wifi to the printer.
The question: Is there a way to turn off the AE's internet access. Using Airport utility, I have tried setting Bridge mode and static IPs to no avail. There is no turn-the-internet-off tick box.
In the ideal setup I would like the ipad 2 to search the web via 3G only (straight away versus waiting vainly for the AE to find it!!) and then print the results via the AE's wifi and airprint without having to toggle wifi on and off all the time.....
Thanks in advance,
Bill...Hi,
You can consider to configure the Forefront TMG Arrays or NLB.
Planning for Forefront TMG server high availability and scalability
http://technet.microsoft.com/en-us/library/dd897010.aspx
Thanks.
Jeremy Wu
TechNet Community Support -
How to set DISPLAY for tomcat service inorder to run reports using rwrun.sh
Here is my problem..
I came to know that its not possible to invoke rwrun.sh without setting the DISPLAY environment variable from the servlet or any java program. But some one proposed me a solution that to set the DISPLAY variable for TOMCAT service from where my servlet invokes the shell script written for report generation using rwrun.sh. The user for tomcat service is wwwrun ..
Do i need to set this variable in the logon script for this user ..but I couldn't find the .profile file for that.
Is there any way to set this variable for tomcat service and get the report successfully.i gave export DISPLAY=aatsv001.local:0.0 in $ORACLE_HOME/bin/reports.sh
but it gives me the following error when i invoke the report
Xlib: connection to "aatsv001.local:0.0" refused by server
Xlib: No protocol specified
REP-0069: Internal error
REP-3000: Internal error starting Oracle Toolkit.
I also tried giving localhost and also aatsv001 (without .local)
some one help me.. -
Hi all,
I am using the function module "KCD_EXCEL_OLE_TO_INT_CONVERT" to upload the excel template to an internal table but i am not getting the complete excel data into the table the fields which contains the drop down list values those values are not coming in to the table.
Is there any other function module which can read even the drop down list values? can any one please provide me the solution.
Thanks in advance
** FYI...i am using the below code:
* upload excel file to a generic table
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename = l_filename
i_begin_col = 1
i_begin_row = 1
i_end_col = 150
i_end_row = 65000
TABLES
intern = lt_intern
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks,
KoushikHi all,
I am using the function module "KCD_EXCEL_OLE_TO_INT_CONVERT" to upload the excel template to an internal table but i am not getting the complete excel data into the table the fields which contains the drop down list values those values are not coming in to the table.
Is there any other function module which can read even the drop down list values? can any one please provide me the solution.
Thanks in advance
** FYI...i am using the below code:
* upload excel file to a generic table
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename = l_filename
i_begin_col = 1
i_begin_row = 1
i_end_col = 150
i_end_row = 65000
TABLES
intern = lt_intern
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks,
Koushik -
Item Missing while using Collator
Dear Experts
I am writng code using KM API to get the list of files in a given folder, when I use
IResourceList resourceList=parent.getChildren();
the size of resource list is 23
I need to sort the list according the coustom property of the file hence I ended up with using Collator object as following
IPropertyName propName=new PropertyName("http://sapportals.com/xmlns/cm/cp","QP_CP_Published_Date");
Collator collator =new Collator();
collator.addCriteria(propName,false);
IResourceList resourceList=parent.getChildren(null,collator,null);
Note the QP_CP_Published_Date is of type date
Now the size of resource list is 18
Please help me in getting the file list in sorted order with out loosing the items
Regards
NoelNO Reply
-
Missing sentences in a forwarded mail while using firefox but not happening in IE or Chrome
I am forwarding a earlier email to the same person. While forwarding 3 sentences were missing while using FIREFOX. But when I tried to do the same with IE or Chrome , it was working fine.
Hi,
A Code 10 error is generated in Device Manager in one of the following situations:
Device Manager can't start the device.
One of the drivers that the device needs does not start.
Device Manager has insufficient information to recognize the error that is bubbled up by the device driver.
Note In this situation, the Code 10 error can be a very generic message that indicates some kind of unspecified driver or device problem.
For more information regarding Code 10 errors, please see:
Fix: "This device cannot start" Code 10 error in Device Manager in Windows
Please try to update the device drivers with the error code 10. More troubleshooting steps please refer to the KB article.
Best regards
Michael Shao
TechNet Community Support -
How to create Generic Service in HCM Processes and Forms
Hi Friend's,
Can you tell me what are the steps to create Generic Service in HCM Processes and Forms and also tell me how to link Generic service with BADI.
In SPRO, I defined one customized generic service, but i cant able to implement the generic service to BADI. Moreover it's asking for Composite Badi Implementation name.
So tell me the steps which guide me to create that.. Waiting for your replies....hi ramesh,
use HRASR00GEN_SERVICE_BASIC create ur own.
Madhukar -
Generic service to populate fields in HCM Processes and Forms
Dear Friends,
I am developing generic service to populate some fields in HCM Processes and Forms. Please let me know whether i need to develop a single service for each field in the form or is better to write one generic service for all the form fields.
Thanks in AdvanceHi Sapient,
By right, generic service means to be generic so that it can be re-used in any HCM forms thats needed the field/validation from the generic service.
Unfortunately in real situation, generic service are not reusable for some reasons:
- for the same field same field might have different validation in different form.
- there is dependency, example, to read special field
The key thing here is all about the design and planing before development. Whereby if you have all the info and requirement HCM form to be implemented(which you wont get it for most of the cases), and you have the overall view of all HCM to be implemented and you are able to plan ahead before coding, then you can design the generic service for each/related field.
If it is not the case, i would encourage to use 1 generic service for all the field in the HCM form. It would ease the team during support/maintenance phrase as well. For sample, please refer to HRMSSRCF_REQUISITION_ADVANCED for Create Requisition form.
This is my humble opinion based on my experience working on HCM forms. Please do comments and discuss.
regards,
Xiang Li -
The Generic Service Component Container can not started
The Generic Service Component Container can not started because the following errror in the log file
Could not start Service Component Container because an unexpected RuntimeException or other Throwable occurred -> oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Not able to create new database connection: FND
Every thing else is working fineThe following generic services can not be started
Output Post Processor
Generic Service Component Container
Email Center Download Processor
The log file contain the same error is as follow respectivily
log of Output Post Processor
Unable to initialize state monitor.
oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Not able to create new database connection: FND
=================================================================================
Log for Generic Service Component Container
LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.out until necessary parameters are retrieved for Logger to be properly started.
LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.initializeStateMachine() : BEGIN
LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.getNewWorkflowContext() : BEGIN
Could not start Service Component Container because an unexpected RuntimeException or other Throwable occurred -> oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Not able to create new database connection: FND
============================================================================================================ -
Report for outgoing service spare parts
Hi,
My client wants to have a report (gate pass or any proof for outgoing) for outgoing service spare parts for repair
Is there any provision to have a returnable gate pass for service orders where goods are taken away for repair and to be delivered back to the plant.
Pls suggest ur comments.Hi,
You can do the Subcontracting scenraio for this service orders.
So while sending the spare parts to vendor create the Subcontracting PO with item category L
Send the parts in 541 mvt type to vendor.
In MBLB you will get the report with respect to vendor how many parts you have sent to the vendor with value if you maintained for that part in the material master.
rgds
Chidanand -
How many PVDM4 can be used in 44xx for IP services?
The PVDM4 Q&A says:
Q. Where are the PVDM4 DSPs installed?
A. Unlike previous generations of PVDM2 and PVDM3 DSP modules, the PVDM4 modules are installed directly on the T1/E1 NIM. Depending on the number of channels required, the appropriate DSP module is installed on the NIM.
For IP services such as transcoding and conferencing, the PVDM4 DSP module can be installed on the motherboard of the 4451-X ISR platform.
What it does not tell: when I am in need for more than one PVDM4 DSP module (more than 256) for IP services, can I install the additional one on dummy NIM modules and use the PVDM4 module on the NIM modules also for IP services?Yes, resources not used in the NIM can be used for IP services
-
Link in the Who is Who iView for ITS Service
Dear All,
Can you please guide me where exactly i have to mention the link for the Service which i have to use from the ITS for the who is who iview?
I am getting the error as
No Service Name specified
Your request didnot contain service name. Please specify service name in the URL path
Example URL
http:
.....\scripts\wgate\pz01\!
I am not understanding where to specify the path exactly.
Regards,
SamirHello Samir,
Are you using standalone ITS.
If u are using itegrated ITS then mention the below parameter in ITS of ur portal system.
ITS HOST NAME: <host_name>:<port>
ITS PATH: /sap/bc/gui/sap/its/
ITS PROTOCAL: http
Regards
Deb
Maybe you are looking for
-
Damaged Library..AGAIN?
Just recently, my iTunes library got damaged after a blue screen error. i resynced ALL 2355 songs, took hours. but after a while it was complete. i had to restart my Computer to install a program, my computer boots bck up again and i open iTunes and
-
SQL Reporting Services - Install database
I've installed Reporting Services on a live server, but when I go through the Reporting Services Configuration Manager to create the database I receive the following error : Verifying database SKU : Success Generating database script : Error Microsof
-
Control Line Items of table in Smartforms
Hi, Please help me out for following problem which I am facing in smartforms. Scenario u2013 I am trying to print Bank Payment voucher, In this I am passing two internal tables from my driver program, One internal table is for header details and ot
-
plugin-container.exe is making my cpu get to 100% immediately i go online. i first thought i got a virus somewhere, but no virus scan could find it. only then i checked the cpu usage to see what makes it go crazy, and it's plugin-container.exe, a pro
-
HT5714 How to download your pre-orders from IOS7?
I can't download Drakes new album because I can't find the pre order button