Implementing Credit management without AR

Hello,
Is it possible to impliment the Credit Management with out the AR module?
we are using the Oracle apllication for AR,
Just when creating orders in SD i want the credit check to be started
Thank's
Yehudit

Hi,
Please check the following links
[Credit Management|http://help.sap.com/printdocu/core/print46c/en/data/pdf/FIARCR/FIARCR.pdf]
[SD Credit Management Wiki|http://wiki.sdn.sap.com/wiki/display/ESpackages/Credit+Management]
[SAP Library|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a9015a-3664-2e10-5bb2-a3ab2b61f5d8?quicklink=index&overridelayout=true]
Kindly close thread if answered.
Regards,
Amit

Similar Messages

Implementing Credit Management without the SD module

Hi SAP Gurus,
Greetings to all. I would just like to confirm if we can actually implement the Credit Management module within FI without the SD module? We are only intending to use Credit Management to control the credit limits assigned to customers. We might be also utilizing some of the basic credit control reports available.
Hoping for some advice / comments from you guys.
Thanks a lot

Hi,
Yes, you can implement the credit management without SD module.
So you cna check the credit limit againest the open exposure consisting of open AR due.
Regards,
Gaurav

Credit management without accounting document

Hi,
In the SAP implementation for my client there is no FI module. FI is handled in third party ERP software.
The Billing Document will not be posted to accounting as there is no FI module. Each billing document will be passed to the third party ERP Software where accouting document will be generated.
My question is related to Credit Management in such environment.
The credit management is to be used in SD area. As the accounting document is not there credit balance will be
credit limit- (open ordersopen deliveriesopen billing documents).
The client requires the open items (as available from third party software) to be considered in the credit check.
I have prospoed the solution as below.
Update the fd32 receivables daily (or at a appropriate frequency) from third party to SAP. If receivables are updated in fd32 it can be considered in the credit check.
My question is, is anybody handled such scenario? Is it possible and recommended to updated fd32 receivables in the database table directly?
Is there any other solution to map this requirement?
Regards,
Sachin.

No idea about your solution, it seems to work but I'mnot sure.
Anyway have a look to this link about Credit Management in Distributed Systems:
http://help.sap.com/saphelp_47x200/helpdata/en/4d/0a4aa3b26811d194f400a0c9306794/content.htm
pls. reward if helpful
Regards
Roberto

Service Interfaces for Credit Management using WS-RM

Hi,
We are implementing FSCM Credit Management on EHP 5 without using PI. For this we are WS-RM and have configured following service interfaces:
CreditCommitmentNotification_In
CreditCommitmentNotification_Out
CreditWorthinessQuery_In
CreditWorthinessQuery_Out
However, when we create sales order, credit check is not being perfomed. Do we need any other service interface for implementing Credit Management?

Hello,
I am using ECC 6 ehp 5 Which Enables you to Implement FSCM services via WS-RM (Web Service Reliable Messaging) instead of having to use Previously PI.
I require to implement the scenario is:
Credit Management (FSCM) and Integration with FICA without requiring PI.
I think I have covered all the technical configuration, but do not know how to test credit management and integration with FI-CA, appreciate if you can do to get a guide.
As indicated by the WSRM configuration guide, run the report SRT_ADMIN_CHECK and the result is:
Cross-checking system settings
bgRFC destination is Operational
bgRFC destination is registered supervisor
WSRM event handler is activated
Task is active watcher
Data collector for monitoring is not activated
ICF All nodes are active for SOAP Runtime
Ending cross-check of system settings
thank you for your help.
Regards.

Customer Credit Management Change

Hello Gurus,
I am trying to implement credit management and when i am using FD32, i am not able to enter anything in the fields other than Horizon. What should i do in order to maintain credit management completely. Please help. Thanks.
Regards,
Pranava

Dear,
    Please go via this link,
     [http://www.sap-img.com/sap-sd/credit-management.htm]
     please search the thread before posting your question.
Regards,
Sandip

Credit management Authorization Based on Value.

Hi All,
Can help me out to find whether we can implement Credit management based on different level of Values or not.As i know we can do authorization based on % like 100%, 110% etc.
But i want to activate release authorization based on the Amount like
level 1 Rs 1 lakh( Can release upto 1 lakh) when it reaches to above of 1 lakh
level2 Rs 2 lakh ( it will release upto 2 lakh)
like wise.As what i understand whatever the standard roles are given relevant to % basis only.

hello, friend.
yes, you can do this in a few ways...
1. try 'Document Class' - a document class is assigned a certain value, which is assigned to a user (the link to credit management is indirect)
2. the traditional way is to use 'Risk Category', and you can set specific values (e.g. maximum document values) when doing OVA8.
i seem to recall there may also be a way to assign values to risk category, but i will check on this.
regards.

Credit management urgent

Dear sap gurus,
after implementing credit management in middle or not from beginning and if you want to have the history a particular customer updated in LIS or if we want to know about his credit exposure.
What should be done.Kindly help me.
regards,

How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored. This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
Check which credit control area is assigned to the company code.
Company code:
Credit control area:
2. Transaction OVFL
Check which credit control area is assigned to the sales area.
Sales area:
Credit control area:
3. Transaction XD02 or VD02
Check which credit control area is assigned to the payer.
Payer:
Credit control area:
4. Transaction SE37
Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
OB45, or the credit control area must be entered under the relevant company code in table
T001CM of the credit control areas allowed.
Company code:
Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
Which settings do exist for the sales document type used?
Sales document:
Check credit:
Credit group:
8. Transaction OVAD
Which settings do exist for the delivery type used?
Delivery type:
Credit group for delivery:
Credit group for goods issue:
9. Transaction OB01
Credit management/Change risk category
Definition of the risk category for each credit control area. This risk category can be
assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
Here, the individual credit checks for key fields
o credit control area
o risk category
o credit group are set. Take these key fields from the above settings and go to the detail
screen. In particular, check whether fields "Reaction" and "Status/block" are set
correctly. To carry out follow-up actions in case of a credit block, the credit check
status must be set (field "Status/block").
11. Transaction FD32
Credit master data for the payer of the relevant document.
Credit account:
Credit limit:
Risk category:
Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
check (static or dynamic credit limit check).
13. Transaction OVA7
Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
field "Active receivable" in Transaction VOV7.
Item type:
Active receivable:
14. Transaction V/08, Pricing
In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
determining the credit value (mark the pricing procedure and doubleclick on "Control").
Usually, the net value plus taxes is used. This way the system is determined to use this
subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
update and credit check.
You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
Pricing procedure:
Line with subtotal = 'A':
15. Transaction OB45
Which update group (field "Update") do you use in the relevant credit control area? The
default setting is "12". If you use another update group, check whether this is fine with
you. If you open an OSS message, please tell us the alternative update group.
Credit control area:
Update:
16. Transaction OMO1
Which kind of update did you choose for structure S066?
In any case, "Synchronous update (1)" has to be chosen as the kind of update.
All other settings will lead to errors.
Difference Between Simple and Automatic Credit Check Types
In automatic check, difference between static and dynamic checks.
SIMPLE CREDIT CHECK : Tr.Code - FD32
It Considers the Doc.Value + Open Items.
Doc.Value : Sales Order Has been saved but not delivered
Open Item : Sales Order has been saved , Delivered, Billed & Transfered to FI, but not received the payment from the customer.
Eg: Customer Credit Limit is Rs.1,00,000/-
Suppose Doc.Value + Open Item Value is Rs.1,10,000/-
Here credit limit exceeds then system reacts.
Options : A) Warning Message
B) Error Message (Sales Order won't be saved)
C) Error Message with Delivery Block
AUTOMATIC CREDIT CHECK : Give extra credit facilities to the particular customer.
STATIC CREDIT LIMIT DETERMINATION :Checking Group + Risk Catageory + Credit Control Area.
A) Credit Checking Groups : Types of Checking Groups.
01) Sales
02) Deliveries
03) Goods Issue
At all the above 3 levels orders can be blocked.
B) Risk Catageory : Based on the risk catageories company decide how much credit has to give to the customer.
HIGH RISK (0001) : LOW CREDIT
LOW RISK (0002) : MORE CREDIT
MEDIUM RISK(0003) : Average Credit
Static Credit Check it checks all these doc value & check with the credit limit
1) Open Doc.Value / Sales Order Value : Which is save but not delievered
2) Open Delivery Doc.Value : Which is delivered but not billed
3) Open Billing Doc.Value : Which is billed but not posted to FI
4) Open Item : Which is transfered to FI but not received from the customer.
DYNAMIC CREDIT CHECK : 1) Open Doc
2) Open Delivery
3) Open Billing
4) Open Items
5) Horizon Period = Eg.3Months
Here the System will not consider the above 1,2,3& 4 values for the lost 3 months
Then assign the Sales Doc & Del Documents.
Sales Doc.Type(OR) + credit Check(0) + Credit Group (01)
Credit Limit Check for Delivery Type : Del.Type (LF) + Del Credit
Group (02) + Goods Issue Credit Group (03)
Set Up for Credit Card Payment Processing
Given below is the set up for credit card payment processing:
Set Up Credit Control Areas:
Define Credit Control Area
Transaction: OB45
Tables: T014
Action: Define a credit control area and its associated currency. The Update Group should be u201800012u2019. This entry is required so the sales order will calculate the value to authorize
Assign Company Code to Credit Control Area
Transaction: OB38
Tables: T001
Action: Assign a default credit control area for each company code
Define Permitted Credit Control Area for a Company
Code
Transaction:
Tables: T001CM
Action: For each company code enter every credit control area that can be used
Identify Credit Price
Transaction: V/08
Tables: T683S
Action: Towards the end of the pricing procedure, after all pricing and tax determination, create a subtotal line to store the value of the price plus any sales tax. Make the following entries:
Sub to: u201CAu201D
Reqt: u201C2u201D
AltCTy: u201C4u201D
Automatic Credit Checking
Transaction: OVA8
Tables: T691F
Action: Select each combination of credit control areas, risk categories and document types for which credit checking should be bypassed. You need to mark the field u201Cno Credit Checku201D with the valid number for sales documents.
Set Up Payment Guarantees
Define Forms of Payment Guarantee
Transaction: OVFD
Tables: T691K
Action: R/3 is delivered with form u201C02u201D defined for payment cards. Other than the descriptor, the only other entry should be u201C3u201D in the column labeled u201CPymtGuaCatu201D
Define Payment Guarantee Procedure
Transaction:
Tables: T691M/T691O
Action: Define a procedure and a description.
Forms of Payment Guarantee and make the following entries Sequential Number u201C1u201D
Payment Guarantee Form u201C02u201D
Routine Number u201C0u201D Routine Number can be used to validate payment card presence.
Define Customer Payment Guarantee Flag
Transaction:
Tables: T691P
Action: Define a flag to be stored in table.
Create Customer Payment Guarantee = u201CPayment Card Payment Cards (All Customers can use Payment Cards)u201D.
Define Sales Document Payment Guarantee Flag
Transaction:
Tables: T691R
Action: Define the flag that will be associated with sales document types that are relevant for payment cards
Assign Sales Document Payment Guarantee Flag
Transaction:
Tables: TVAK
Action: Assign the document flag type the sales documents types that are relevant for payment cards.
Determine Payment Guarantee Procedure
Transaction: OVFJ
Tables: T691U
Action: Combine the Customer flag and the sales document flag to derive the payment guarantee procedure
Payment Card Configuration
Define Card Types
Transaction:
Tables: TVCIN
Action: Create the different card types plus the routine that validates the card for length and prefix (etcu2026)
Visa , Mastercard, American Express, and Discover
Create the following entries for each payment card
AMEX American Express ZCCARD_CHECK_AMEX Month
DC Discover Card ZCCARD_CHECK_DC Month*****
MC Mastercard ZCCARD_CHECK_MC Month
VISA Visa ZCCARD_CHECK_VISA Month
The Routines can be created based on the original routines delivered by SAP.
*****SAP does not deliver a card check for Discover Card. We created our own routine.
Define Card Categories
Transaction:
Tables: TVCTY
Action: Define the card category to determine if a
payment card is a credit card or a procurement card.
Create the following two entries
Cat Description One Card Additional Data
CC Credit Cards No-check No-check
PC Procurement Cards No-check Check
Determine Card Categories
Transaction:
Tables: TVCTD
Action: For each card category map the account number range to a card category. Multiple ranges are possible for each card category or a masking technique can be used. Get the card number ranges from user community. Below is just a sample of what I am aware are the different types of cards.
Visa Credit Expires in 7 days.
400000 405500
405505 405549
405555 415927
415929 424603
424606 427532
427534 428799
428900 471699
471700 499999
Visa Procurement Expires in 7 days.
405501 405504
405550 405554
415928 415928
424604 424605
427533 427533
428800 428899
Mastercard Credit Expires in 30 days
500000 540499
540600 554999
557000 599999
Mastercard Procurement Expires in 30 days
540500 540599
555000 556999
American Express Credit Expires in 30 days
340000 349999
370000 379999
Discover Card Credit Expires in 30 days
601100 601199
Set Sales Documents to accept Payment Card Information Transaction:
Tables: TVAK
Action: Review the listing of Sales Document types and enter u201C03u201D in the column labeled u201CPTu201D for each type which can accept a payment card
Configuration for Authorization Request
Maintain Authorization Requirements
Transaction: OV9A
Tables: TFRM
Action: Define and activate the abap requirement that determines when an authorization is sent. Note that the following tables are available to be used in the abap requirement (VBAK, VBAP, VBKD, VBUK, and VBUP).
Define Checking Group
Transaction:
Tables: CCPGA
Action: Define a checking group and enter the
description. Then follow the below guidelines for the remaining fields to be filled.
AuthReq Routine 901 is set here.
PreAu If checked R/3 will request an authorization for a .01 and the authorization will be flagged as such. (Insight does not use pre-authorization check).
A horizon This is the days in the future SAP will use to determine the value to authorize
(Insight does not use auth horizon period).
Valid You will get warning message if the payment card is expiring within 30 days of order entry date.
Assign Checking Group to Sales Document
Transaction:
Tables: TVAK
Action: Assign the checking group to the sales order types relevant for payment cards
Define Authorization Validity Periods
Transaction:
Tables: TVCIN
Action: For each card type enter the authorization validity period in days.
AMEX American Express 30
DC Discover card 30
MC Master card 30
VISA Visa 7
Configuration for clearing houses
Create new General Ledger Accounts
Transaction: FS01
Tables:
Action: Two General Ledger accounts need to be created for each payment card type. One for A/R reconciliation purposes and one for credit card clearing.
Maintain Condition Types
Transaction: OV85
Tables: T685
Action: Define a condition type for account determination and assign it to access sequence u201CA001u201D
Define account determination procedure
Transaction: OV86
Tables: T683 / T683S
Action: Define procedure name and select the procedure for control. Enter the condition type defined in the previous step.
Assign account determination procedure
Transaction:
Tables:
Action: Determine which billing type we are using for payment card process.
Authorization and Settlement Control
Transaction:
Tables: TCCAA
Action: Define the general ledger accounts for reconciliation and clearing and assign the function modules for authorization and settlement along with the proper RFC destinations for each.
Enter Merchant IDu2019s
Transaction:
Tables: TCCM
Action: Create the merchant idu2019s that the company uses to process payment cards
Assign merchant idu2019s
Transaction:
Tables: TCCAA
Action: Enter the merchant idu2019s with each clearinghouse account
Reward points if useful.
Regards,
Anbu

Credit Management System - Update of SD Documents after CMS start

Hi,
we are starting CMS functionality in our SD module. CMS (Credit Management System) works remotely by an XI connection. When we switch to use CMS in production system, we have to transfer all opened orders (not yet invoiced) to CMS system.
How can we achieve it? Can program RFDKLI20 (t-code F.28) be used for this purpose? Does it require any settings to point out the CMS connection?
Thank you
/BR

Hi Wojciech
CREDIT MANAGEMENT
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored. This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
Check which credit control area is assigned to the company code.
Company code:
Credit control area:
2. Transaction OVFL
Check which credit control area is assigned to the sales area.
Sales area:
Credit control area:
3. Transaction XD02 or VD02
Check which credit control area is assigned to the payer.
Payer:
Credit control area:
4. Transaction SE37
Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
OB45, or the credit control area must be entered under the relevant company code in table
T001CM of the credit control areas allowed.
Company code:
Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
Which settings do exist for the sales document type used?
Sales document:
Check credit:
Credit group:
8. Transaction OVAD
Which settings do exist for the delivery type used?
Delivery type:
Credit group for delivery:
Credit group for goods issue:
9. Transaction OB01
Credit management/Change risk category
Definition of the risk category for each credit control area. This risk category can be
assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
Here, the individual credit checks for key fields
o credit control area
o risk category
o credit group are set. Take these key fields from the above settings and go to the detail
screen. In particular, check whether fields "Reaction" and "Status/block" are set
correctly. To carry out follow-up actions in case of a credit block, the credit check
status must be set (field "Status/block").
11. Transaction FD32
Credit master data for the payer of the relevant document.
Credit account:
Credit limit:
Risk category:
Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
check (static or dynamic credit limit check).
13. Transaction OVA7
Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
field "Active receivable" in Transaction VOV7.
Item type:
Active receivable:
14. Transaction V/08, Pricing
In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
determining the credit value (mark the pricing procedure and doubleclick on "Control").
Usually, the net value plus taxes is used. This way the system is determined to use this
subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
update and credit check.
You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
Pricing procedure:
Line with subtotal = 'A':
15. Transaction OB45
Which update group (field "Update") do you use in the relevant credit control area? The
default setting is "12". If you use another update group, check whether this is fine with
you. If you open an OSS message, please tell us the alternative update group.
Credit control area:
Update:
16. Transaction OMO1
Which kind of update did you choose for structure S066?
In any case, "Synchronous update (1)" has to be chosen as the kind of update.
All other settings will lead to errors.
Reward if useful to u

New Requirement credit management SAP SD

Hello GuRus i am new in SAP SD please help
My client want to implement credit management as
For Ex. Company want to give credit limit to its Agent 100000 inr
For example 5 customer is associated with this agent then company again want to give 30000 to all associated customer to agent
Means credit limit of 5 customer *30000= 150000
But credit limit of agent is less than customer associated with him
In this case customer directly paying to company but agent takes responsibility to collect money in case he default
How to implement and what enhancement required

Hi
Maybe you can try with the parent son scenario. Please, see SAP Note 1011714 - Sales values / Credit exposure in scenario Father - Sons for further information.
I hope this helps you
Regards
Eduardo

Credit Management in Distributed Systems

Hi All,
Could you please explain what triggers outbound DEBMAS idoc from central FI system to Sales System.?
We are about to implement Credit Management in our distributed systems.
I would like to know, how frequently credit limit data is sent from Central FI system to Sales System. What triggers these outbound Idocs generation? How customer masters to be sent is determined.?
Thanks in advance.
Regards,
Ravi Kumar

Hi All,
Could anyone please advice.?
Thanks,
Ravi Kumar

Credit management static check

Hi all,
i want to configure STATIC CHECK in my organization. My organization is operating with one sales org but many sales area. i want to configure static check to only export customers served by only one sales area xxxx/yy/zz. yy is distribution channel specially for exports & zz is specially export division with products specifically to be sold to export customers.There are almost 28 export customers. will static check be configured customer based or sales area based or sales org based.
Please guide.
regards
vikas chhabra
098714 88 718
[email protected]

hi,
pl check this ;
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors.
Hope it helps.
Thanks
Sadhu Kishore

SD CREDIT MANAGEMENT - CUSTOMER AND PERIODWISE

Dear All
We need to maintain the PERIOD WISE as well as CUSTOMER WISE Credit Management , If it is possible ,please sent us the complete config document of the same.
Regards
Animesh Chakraborty

Hi,
period wise u can use in ova8 .in sesional factor can be used .u have to do customer wise u can do with FD-32 .
PLEASE REFF THE NOTES IT MAY USEFULL FOR U.
How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors.
Best regards,
venkataswamy.y
Edited by: yanamadala venkataswamy on Dec 10, 2008 3:11 AM

Time Management without Payroll?

Has anyone implemented Time Management without Payroll? I am in the process of coming up with a design on retrieving payable hours from the B2 cluster and send them to an external payroll system. The problem I am running into is knowing what has changed (if hours were added or deleted in the past) without having to keep my own version of the cluster the last time Time Eval was run and comparing to this time.
Any help is appreciated...

I had this problem view years ago (Release 4.0)
You have to use the Report RPTEZL00 to made the wagetypes for the other payroll - the problem was the table T599Z - that is used to translate the SAP LGA into the other LGA - the check ends in both times in T512W

CREDIT MANAGEMENT-scenario

hi
How the system calculate credit limit in sales order. mean how it pickup the previuos vales and add with net doc value.
regards
murali

HI Murali
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored. This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
Check which credit control area is assigned to the company code.
Company code:
Credit control area:
2. Transaction OVFL
Check which credit control area is assigned to the sales area.
Sales area:
Credit control area:
3. Transaction XD02 or VD02
Check which credit control area is assigned to the payer.
Payer:
Credit control area:
4. Transaction SE37
Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
OB45, or the credit control area must be entered under the relevant company code in table
T001CM of the credit control areas allowed.
Company code:
Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
Which settings do exist for the sales document type used?
Sales document:
Check credit:
Credit group:
8. Transaction OVAD
Which settings do exist for the delivery type used?
Delivery type:
Credit group for delivery:
Credit group for goods issue:
9. Transaction OB01
Credit management/Change risk category
Definition of the risk category for each credit control area. This risk category can be
assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
Here, the individual credit checks for key fields
o credit control area
o risk category
o credit group are set. Take these key fields from the above settings and go to the detail
screen. In particular, check whether fields "Reaction" and "Status/block" are set
correctly. To carry out follow-up actions in case of a credit block, the credit check
status must be set (field "Status/block").
11. Transaction FD32
Credit master data for the payer of the relevant document.
Credit account:
Credit limit:
Risk category:
Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
check (static or dynamic credit limit check).
13. Transaction OVA7
Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
field "Active receivable" in Transaction VOV7.
Item type:
Active receivable:
14. Transaction V/08, Pricing
In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
determining the credit value (mark the pricing procedure and doubleclick on "Control").
Usually, the net value plus taxes is used. This way the system is determined to use this
subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
update and credit check.
You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
Pricing procedure:
Line with subtotal = 'A':
15. Transaction OB45
Which update group (field "Update") do you use in the relevant credit control area? The
default setting is "12". If you use another update group, check whether this is fine with
you. If you open an OSS message, please tell us the alternative update group.
Credit control area:
Update:
16. Transaction OMO1
Which kind of update did you choose for structure S066?
In any case, "Synchronous update (1)" has to be chosen as the kind of update.
All other settings will lead to errors.
Reward if useful to u

Credit management ECC 6.0 implementation

Hi Experts/Gurus,
One of our clients have done a technical upgrade from SAP 4.6c to ECC 6.0.
Now they want to know what will be the timeline required for implementation of the Integrated credit management functionality of ECC6.0 in their SAP system if they go on for functional upgrade.
Now following are my doubts:
1) How to compare their existing credit management process/Functionality with the new ECC 6.0 integrated credit management functionality?
2) How to decide upon the timeline required to implement the new credit management functionalityof ECC 6.0?
Thanks in Advance!

Hi,
Its depend on your company upgrade strategies, compair 40. credit mgt. functionality & 6.0 functionality.
then go for upgradre
Heer I some comments on upgrade
Upgrade Scenarios
Customers who are motivated to upgrade to ECC 6.0 generally pursue at least one of the four key goals just discussed as the primary goal of the upgrade.
Improved business strategy
Sustainability
Operational excellence,
Lower TCO
SAP takes three major approaches to upgrading, each driven by a different motivation and leading to a different ROI and payback periods.
u2022 Technical upgrade:
Focuses on risk mitigation and sustainability of the existing SAP solution.
u2022 Functional upgrade:
Focuses on reducing TCO by reducing system complexity u2013 for example, by returning custom modifications and custom code to SAP standard code
u2022 Upgrade with strategic business improvements:
Considers major reengineering and implementation of new strategic business applications as part of the project scope. These approaches are summarized below.
The three major approaches can be complemented by other compelling changes such as system landscape consolidation, the implementation of shared service center(s), and so forth.
In summary, the more your upgrade decision is driven by business improvement goals, the better your expected ROI. Upgrade experiences and customer statistics confirm that the decision for an SAP software upgrade is usually determined by a mix of business, technology, and strategic criteria.

Implementing Credit management without AR

Similar Messages

Maybe you are looking for