In Price determination process,how to correct Net values ?

In me23n, how can I correct Net value inclusive of tax & final price ?
Netvalue inclusive of tax = basic + NAVD(deductible) + NAVS(non deductible)
When I go to me23n screen, when I click on invoice tab the screen contains basic price ,deductible tax and non deductibe tax.
Invoice tab
JSTD A/P Service tax ded        12.000 %         5,148.00
JSTE     A/P Ed Cess ST ded        2.000 %         102.96
JSTH     A/P SEd Cess ST ded   1.000 %          51.48
Total deductible tax(NAVD) is 5302.44
but when I go to condition tab
NAVD     Deductible Tax       6,266.49      INR
because NAVD calculated incorrectly,hence netvalue inclusive of tax is calculating wrong values.
How can I correct NAVD?
Regards,
Rachel
Edited by: Rachel on Oct 14, 2008 8:41 AM

Hi,
You can check in the Pricing Calculation Schema.The addition and subtractions steps are done there. check the step numbers given are correct.
For that, in Vendor AMster Purchasing view check the schema assigned and go to Customisation for MMPurchasing-Conditions----Define calculation Procedure. assignment of Calculation schema to schema....
Hope this will help.
Regards,
Smitha

Similar Messages

How the Purchase Price determination process works in sap-mm?

Hi,
Can anybody tell in detail or have step by step document on Purchase Price determination process?
Thanks,
Pradip

Hi,
You can go for pricing manually or automatic. If you need pricing automatic you have to go for use of Access Sequences and Schema Group of Vendor. You can customize your pricing procedure according to your requirement such as like Domestic, Import and Stock transport.
For the above individually you have to configure Pricing Procedure and the following steps are:
SPRO->MM->Purchasing->Conditions->Define Price determination process
1. Define Condition Table:
2.Define Access Sequence,
3.Define Condition Type,
4.Define Calculating Schema,
5.Assign Calculation Schema, Access Sequence and Condition Type,
6.Define Schema Group Of Vendor,
7. Define Schema Group Of Purchasing Organization,
8.Assign Schema Group Of Vendor to Purchasing Organization,
9.Assignment of Schema Group Of Vendor ,Schema Group Purchasing Organization and Calculation Schema.
10. Assign Vendor to Schema Group of Vendor (XK02)
11.Maintain Condition record (MEK1)
after above steps, you can go for create PO in ME21N.
In the case of Import PO, you have to activate Import PO.
SPRO->Materials Management -> Purchasing -> Foreign Trade/Customs ->Control Foreign Trade Data in MM and SD Documents -
Regards,
Biju K

Condition Types in Price Determination Process

Hi
Can any one explain me about in Detail about the VARIOUS TABS that work in the CONDITION TYPE of PRICE DETERMINATION PROCESS
Thanks & Regards,
Senmani.

hi
hi
control data 1 :
Condition Class is a grouping that lets you control each condition type differently.
For example, the condition type "taxes" defines that the taxes in a document must be recalculated if the country of the ship-to party changes.
Condition category (examples: tax, freight, price, cost)
A classification of conditions according to pre-defined categories (for example, all conditions that relate to freight costs).
Condition category basically identifies the type pf cost the Condition type is being used for & can be used for .
Calculation type
Determines how the system calculates prices, discounts, or surcharges in a condition. For example, the system can calculate a price as a fixed amount or as a percentage based on quantity, volume, or weight.
The calculation type can be set when generating new condition records. If this does not happen, the calculation type maintained here is valid for the condition record
Rounding rule
The rule that determines how the system rounds off condition values during pricing. The last digit will be rounded.
Example
In the standard rounding rule '_', values are rounded off according to business standards:
10.454 -> 10.45 DEM
10.455 -> 10.46 DEM
In rounding rule 'A', values are always rounded up:
10.459 -> 10.46 DEM
10.451 -> 10.46 DEM
In rounding rule 'B', values are always rounded down:
1045.9 -> 1045 LIT
1045.1 -> 1045 LIT
In this example, the currency of the condition rate is Italian Lira. The Italian Lira does not have any places after the point.
Structure condition
controls whether the condition type should be a duplicated condition or a cumulated condition.
This control is only helpful when you use bill of materials or configurable materials.
Aduplicated condition is duplicated into all assigned items.
A cumulated condition contains the net value of all assigned items.
control data 2 :
promotions
Specifies that the condition type in question is only valid for Promotions.
Use
Conditions for which this indicator has been set can only be maintained via the 'Promotion' menu - not via the Purchasing menu.
Accrual (e.g. Freight)
Indicates that the system posts the amounts resulting from this condition to financial accounting as accruals.
Use
If you mark this indicator, the condition appears in the document as a statistical condition.
Before Release 4.0 variant conditions (VA00) had to be created with the condition category 'O'
Problem: It was not possible to indicate a 'Variant condition' at the same time as 'Internal costing condition' and 'Freight'.
Solution: For this reason more indicators are being set up in 4.0 for the condition type:
'Variant condition' (KVARC)
'Internal costing condition' (KFKIV)
The characteristic values O and I for the condition category must no longer be used.
For more information, see the note 93426.
inv.list condi
Condition for invoice list
Marks the condition type as relevant for internal costing.
Quantity conversion
This field controls the quantity conversion during determination of the condition basis.
The field is only relevant for calculation rule 'C' (quantity- dependent.
It is relevant if the sales quantity unit and the condition quantity unit are identical (and is different to the basis quantity unit).
Deactivated: The condition basis quantity is converted via the quantity to the stockkeeping unit. This means that the condition quantity is determined for planned factors. This means that a change to the conversion factors in the delivery or the order are not taken into account.
Rounding errors can occur during quantity conversion.
Activated: If the sales quantity unit and the condition quantity unit are identical, the quantity of the document item is used, i.e. the actual quantity.
Condition for inter-company billing
Conditions for Internal Costing, for example PI01 and PI01 were defined before Release 4.0 by KNTYP = I (Price for internal costing).
Problem: It was not possible to indicate 'Freight condition' at the same time as 'Internal costing condition' and 'Variant condition'.
Solution: Therefore a new indicator 'Internal costing condition' (KFKIV) has been set up. You can use this to indicate a freight condition as an internal costing condition. For more information, see note 93426.
Scale :
Scale basis indicator
Determines how the system interprets a pricing scale in a condition. For example, the scale can be based on quantity, weight, or volume
Checking rule for scale rates
Indicates whether the scale rates must be entered in ascending or descending order.
Scale Type
Indicator that controls the validity of the scale value or percentage:
From a certain quantity or value (base scale)
Up to a certain quantity or value (to-scale)
Alternatively, it is possible to work with interval scales. Interval scales must be stored in the condition type, that is, the scale type "interval scale" cannot be changed in the condition record. The reason for this is technical restrictions resulting from the programming within pricing.
Formula for scale base value
Formula for determining the scale base value.
Use
You can use this formula to specify calculation methods that are not provided in the standard system.
reward points if helpful
thanks and regards
ravikant dewangan

Using formula in price determination process for PO

Hi, dear experts,
I would like to define some conditions types for purchasing orders that allow me to calculate an insurance amount using the formula:
Insurance = [CF)((C+F)10%)]T
Where: C is the Gross price, F is the Freight and T is a factor that the user has to input
For that, I define a condition type for gross price, for the freight and for the T value
How can I have to define a condition type to do this operation?
On the other hand, the freight is a percentage of the gross price, but for this operation I need the amount, how can I make reference to this amount? (Result of gross price * freight (%))
Also, there is a link where can I find information regarding the price determination process?
Thanks in advance,
Mairo.

Hi,
You can store (surely you have them in data) the data for C and F in values that you can config in pricing procedure in the field 'SubTo'. After, you can obtain the amount with a formula VOFM and set it in M/08 in field 'AltCTy'. You can check this links to know how to do it:
http://saptechsolutions.com/pdf/InsideVOFM.pdf
http://saptechsolutions.com/pdf/VOFMFormulaRoutines.pdf (althouth it's for SD, pricing procedure in SD (tcode V/08) and in MM (M/08) are the same.
I hope this helps you.
Regards,
Eduardo

How to enable net value in sap crm opportunity

hello all ,
how to enable net value in sap crm opportunity and item category.
please help me out i am new in sap crm
Ahmad

Hi Ali,
Every transaction which you create have some predefined rule in the form of procedure which is attached in the transaction level. You can follow below path and check for the transaction which are the rule maintained.
CRM->Basic setting-> Define transaction types.
Search for your transaction type and double link in order to see all the rules attached to transaction level.
You also need to define which item categories you wanted to configure for particular transaction type which you all ready have done it seems.
You also need to define pricing procedure to the transaction where you need to checked for errors.
Below is the path
CRM->Basic setting-> Define transaction type-> open your transaction
step 2:click on assignment of business transaction categories than select category as Sales
than click on Customizing Header option to see attached pricing procedure with it.here you need to check for your error.
to check partner determination rule please follow below path in SPRO. -> partner determination procedure
Check in head of transaction which partner procedure is attached.
Than search for partner determination procedure in below path.
I hope this will help you to validate the setting for your transaction and will be helpful to solve your issue.
Thanks,
Prem

How to enter Net Value manually on item level?

Hi Experts:
My client wants to enter Net Value of opportunity position directly on item level, that is without entering manual condition. The reason is, that the process o entering manual condition is very long: opening price list - creating new codition - choosing price element.
How can I do so??
Best regards,
Cristina

Dear Cristina,
I guess you are working on CRM 2007 or CRM 7.0.
In new WEBUI in assignment block "item" your are able to enter the price in column "Net Value" .
The column can be added by button personalization on the right side.
I hope this info helps,
Regards
Rene

How to hide net value of $0 on Credit Memos from rejected return?

We are creating a credit memo request with a second line item which contains rejected returns. Basically line item 1 contains the actual qty which we are refunding and line item 2 is the qty which we will not be refunding. When we create the the credit memo from this document in VF04, the line item two is showing on the credit memo with a net value of $0.
Is there a way to hide this net value of $0 or rejected return items from coming over onto the credit memo. We would like to just show positive values on the CM.
- Chuck

The reason for rejection is set in when the credit memo request is craeted and the net value of $0 still appears on the credit memo.. how ever the pricing values are in an unprocessed (yellow) status.
So after running a few test when the billing block was set on the credit memo request.. I noticed that the credit memo request was still open after VF04, would appear as unprocessed, and always show up when VF04 is ran.
Is there some other way to get the net value of $0 to NOT appear on the credit memo beyone reason for rejection and billing block. Maybe something in the configuration copy control??

How to get net value in sap crm opportunity

hello all,
i want to create an opportunity with product details including sales potential , weighted potential.
how to configure perticular product.
please help me out.
Ahmad

Muhammad,
Net Value gets populated if you have pricing information maintained on the Product and the Opportunity Item category has Pricing Enabled.
Based on the pricing conditions maintained the Net value get populated on the Opportunity.
Hope this helps !
Regards
Naveen

Price determination process for contract

Hi experts,
I need to affect a new calculation schema to the header of the contract.
How can I do this please ? Could you please give me steps to do this ?
What procedure I need to change to manage new condition for the header of a contract ?
Thanks in advance.

Hi,
Yes, I have created a new procedure "Condition Supplement Header" based on the RM0001 schema. I put my new condition type (Discount % on Gross) but I do not know how to affect this new schema to the header of the contract.
Thanks for your help

How get correct note values on the staff?

I'm new to Garageband. When I feed in a tune from my keyboard (melody only), the note values are mostly wrong, unless I make the notes all quarter notes or all eighth notes, and play them exactly with the metronome. (The notes show up as triplets, or two notes simultaneously,etc., instead of a dotted quarter note, and so on.
Where can I find more info on how to get the correct notation to appear in GarageBand?
Thanks
larryac

GB is not notation software, and it's accuracy is debatable, but this thread may help:
http://discussions.apple.com/thread.jspa?messageID=9861501&#9861501

Transaction cannot be posted due to errors in price determination

Hi
when I made the receipt of goods by MIGO the system to me gives me the following message blocking:
" Transaction cannot be posted due to errors in price determination
   Message no. ME573 "
Thainks in advance

Hello
Please refer the message long text and just check based on the suggestions given :
Short Text
Transaction cannot be posted due to errors in price determination
Diagnosis
The error marked with 'X' occurred during the price determination process for purchasing document :
[ ] Net price is 0.
[ ] Net price is negative.
           and/or there are no valid conditions or the duration of the contract has ended.
[ ] Effective value is negative.
[ ] Mandatory condition missing.
[ ] Negative delivery costs.
[ ] Delivery costs have been recorded although invoice receipts are not defined for the item.
[ ] Error during quantity conversion
[ ] Error during currency translation
[ ] Field overflow
[ ] A condition involving delivery costs exists without a transaction/event key.
[ ]Error during maint. of delivery costs in master conditions
              Delivery cost conditions in different validity periods not identical
System Response
The transaction cannot be posted without successful price determination.
Procedure
Check the purchasing document and the associated conditions:
Display purchase order
Display scheduling agreement
If the problem cannot be resolved in this way, contact your system administrator.
The latter can check the Customizing settings for price determination in Purchasing under Conditions .
warm regards
Ramakrishna

Error in net price calculation, item 000010 (Please correct)

Hi
Can you tell me error and correction for the same ? It occurs during creation of Std.PO. whom RM1000 prcing procedure is assigned.
Error in net price calculation, item 000010 (Please correct)
     Message no. 06213
Diagnosis
     Possible causes:
     o   The net price is negative.
         Check the prices and conditions entered.
     o   An error has occurred during currency translation.
         Check whether the foreign currency is defined in the system.
     o   The unit of measure of an item is not allowed.
         Check the units of measure entered.
     o   An internal error has occurred during the price determination
         process.
         A mandatory condition type is not defined in the system. Please
In the analysis under item details condition tab I got message 301 as Acess 0002 12 is missing.
Acess seq. 0002 is assigned to condition type PB00.

I know this thread is very old but I had the same issue and found the solution.
Enter the SubTotal in the pricing scheme for condition P101 (in my Case 9 - Copy values to KOMP-BRTWR (gross value)).
Than it works for my case.
Hope this helps.

Purchase order price determination

Hi Gurus.
Please help on below Inquiries
In Purchase order, how is the net price determined?
Is it from the agreement? the info record? RFQ? Is there a sequence for this?
If there is, where is this configured?
Thanks!

Hi,
Purchase order price determination takes place with help of Access Sequences and Schema Group of Vendor.
You can go for pricing manually or automatic. If you need pricing automatic you have to go for use of Access Sequences and Schema Group of Vendor. You can customize your pricing procedure according to your requirement such as like Domestic, Import and Stock transport.
For the above individually you have to configure Pricing Procedure and the following steps are:
SPRO->MM->Purchasing->Conditions->Define Price determination process
1. Define Condition Table:
2.Define Access Sequence,
3.Define Condition Type,
4.Define Calculating Schema,
5.Assign Calculation Schema, Access Sequence and Condition Type,
6.Define Schema Group Of Vendor,
7. Define Schema Group Of Purchasing Organization,
8.Assign Schema Group Of Vendor to Purchasing Organization,
9.Assignment of Schema Group Of Vendor ,Schema Group Purchasing Organization and Calculation Schema.
10. Assign Vendor to Schema Group of Vendor (XK02)
11.Maintain Condition record (MEK1)
after above steps, you can go for create PO in ME21N.
In the case of Import PO, you have to activate Import PO.
SPRO->Materials Management -> Purchasing -> Foreign Trade/Customs ->Control Foreign Trade Data in MM and SD Documents ->>>>>>
Regards,
Biju K

Error: Transaction cannot be posted due to errors in price determination

Hi,
I am facing below error when i try to post GR for a SA. I checked out all the configurations, these worked on GR for PO but not on SA.
I have seen other posts which recommend to view OSS note 447374 and 446831. I am not sure where to find these and how to use these notes.
Please help!.
Thanks
Ramya

Here you go
Transaction cannot be posted due to errors in price determination
Message no. ME573
Diagnosis
The error marked with 'X' occurred during the price determination process for purchasing document 201 00010:
[ ] Net price is 0.
[ ] Net price is negative.
and/or there are no valid conditions or the duration of the
contract has ended.
[ ] Effective value is negative.
[X] Mandatory condition missing.
[ ] Negative delivery costs.
[ ] Delivery costs have been recorded although invoice
receipts are not defined for the item.
[ ] Error during quantity conversion
[ ] Error during currency translation
[ ] Field overflow
[ ] A condition involving delivery costs exists without a
transaction/event key.
[ ]Error during maint. of delivery costs in master conditions
Delivery cost conditions in different validity periodsnot identical
System Response
The transaction cannot be posted without successful price determination.
Procedure
Check the purchasing document and the associated conditions:
Display purchase order
Display scheduling agreement
If the problem cannot be resolved in this way, contact your system administrator.
The latter can check the Customizing settings for price determination in Purchasing under Conditions -> Define Price Determination Process
When the foregoing steps have been carried out, try posting the transaction again.

Price determination as per delivery date

Hi All,
I have created a PO in which the PO is picking up the dalivery date as the current date. when i change the delivery date as some other date there is a message saying Delivery date changed (new price determination process may be necessary).. I worked with my ABAP guy and solved this problem and now the PO is not picking the current date.
Now, the user wants me to configure how to determine the Price for different delvery dates.
That is if i change the delivery date to some other how to check if the PO is picking the price determined by that delivery date.
I checked the info record and the validity date is 12/31/9999. and this is the message iam getting
Delivery date changed (new price determination process may be necessary)
Message no. 06484
Diagnosis
If the price determination date is the delivery date and other conditions are valid on the new delivery date than those that are valid on the old one, the price is no longer valid.
Procedure
If this is the case, and you wish to see the price that is valid as at the delivery date, carry out a new price determination process.
And u said to define on the basis of which Date of Price Determination system should select the price. where can i define the price determination for delivery date. This is the first time iam working on such issue of price determination.
Thanks,
Sameer

Dear Sameer
There is no relevance of pricing date with delivery date. For information, while creating sale order in VA01 after giving your sales area and execute, there is a field "Pricing Date" in Sales tab and the date will flow into this field by default the date on which you are creating sale order.
So irrespective of your delivery, your invoice pricing will be effective based on this field. Unless you change the date here, your pricing condition will not change, if you have a different pricing in VK11. Of course, you can also change the pricing date at item level for which click on "Goto -- Item -- Sales A".
thanks
G. Lakshmipathi

In Price determination process,how to correct Net values ?

Similar Messages

Maybe you are looking for