In-Transit Inventory invoices

Please help me here
We created a document type KI to use for recording and reversing the in-transit inventory movements that are done at the end of the month. I have to test if this document type is working or not.
What would be my starting point? How do I test this?

if i understand u r question then answer is u can't. The fact that the inter-organization transaction is in-transit or direct is not mentioned on the trasnaction. It is specified on the shipping n/w.
So if u have a n/w that when u ship items from a to b they actually go from a to c and then to b will be automatic.

Similar Messages

How to cost intercompany in-transit inventory

Hi-
I am not very famaliar with MM, I usually am FI. I have a question about doing an intercompany transfer of inventory from one company code to another - US to Canada. We are doing a STO that moves it. When the transfer happens, I can see in my accounting documents that it is coming out of the US inventory.
It is going to a In Transit inventory location. I was expecting to see the value of the inventory also being recorded on the receiving company but I don't see it until the receipt is made in Canada.
Have I missed something, why don't I see this inventory cost being picked up in the receiving company. Thanks.

Hello,
From what i see you are using a 2 step STO process and hence its normal to see the inventory in trasit till the receiving plant does a GR.
However if your requirement is to see a accounting document immediately you should use a 1 step STO process where the GI from the sending plant will create a GR in the receiving plant. This is recommended only if the plants are located close to each other. In your case as the transfer is across 2 countries, it is bes that you use the 2 step process.
Hope this clarifies.
Regards,
Jimmy Ambooken

Stock in Transit Inventory Difference

Hi SAP Gurus,
We have a scenario such that, "there is some quantity of stock has been showing in Stock in transit".
When we verify the documents(PO, Delivery) pertaining to that stock in transit, all are very old(2004) and have been archivied already.
Now, How to reconcile the difference...?
Please suggest.
Rgds,
Shravan.

see OSS notes
389484 - Movement types 557/558 for the stock in transit correction
392205 - Analysis of stock in transit/correction for split valuation
Didn't you ask this already?:
Stock in Transit Inventory Difference

In Transit Inventory

Hi,
Could anyone pls help me to get the Intransit Inventory for a STO(between plants) ? .Can we get this based on the delivery?.Or any other table?
Pls help.
Thanks
RAm

check MARC where u will ? i am not sure of Field name .
and also check tcode : MMBE
regards
Prabhu

Inventory posting - stock in transit G/L account

Hello!
We have a unique requirement that we need to post the stock in transit inventory only if the delivery is for one particular customer (sold to party). It is our own company but not on SAP hence, on the books, an inter company transaction. All that is different in this case is the account assignment group of the customer which basically is no help in configuring OMWB (G/L account determination for inventory postings).
The material/plants/movement types are all the same for all transactions, thereby providing us with no 'uniqueness' in this particular transaction to post these stock in transit inventories to a different G/L. I could possibly look at having another movement type if that can help but then again, how will that be valid only for a particular transaction with this customer, I am not sure...
Can anybody provide me with a step by step instructions on how can this be achieved, if it indeed can be? Appreciate any help or posting here if anyone wants any more clarifications on the issue...
Many thanks!

Hi,
As you might already know that the G/L determination happen based on Movt type and the valuation class. in your case as the movt type and the val class are same, you willl not be able to customize to post it to different account
so for this you do 2 ways:
1: you create a new delyvery type and a new movement type so that you can configure the account determination (OMWB).
2. you can influence the account determination by writing a code in the user exit ZXMBCU02 here you can force the system to post it into the different G/L account.
Hope this helps,
Vikrama

Stock Transport G/L Postings In Transit

We are using the stock transport orders to move product between plants within the same company code. When the GI is posted to the delivery document, offsetting G/L posting are created in the issuing and receiveing plants to the inventory account for FG inventory.
Our controlling group has asked if it is possible to post to an "In Transit" G/L account in the receiving plant when the 641 movment is processed. They would then like another G/L posting associated with the 101 movment to move the value from an In Transit account to the normal inventory G/L account. Is this possible?

As an example:
Current Logic
GI is posting movement 641.
   Credit to G/L account 350000 Invent-FG -$1000.00 (Sup. Plt.)
   Debit to G/L Account 350000 Invent-FG $1000.00 (Rec Plt.)
Recept of Stock Transport Order Mvt. 101
   No G/L posting
Requested Logic
GI is posting movement 641.
   Credit to G/L account 350000 Invent-FG -$1000.00 (Sup. Plt.)
   Debit to G/L acccout 359981 Gds In Transit $1000 (Recv Plt.)
Recept of Stock Transport Order Mvt. 101
   Credit to G/L account 359981 Gds in Transit -$1000 (Recv Plt.)
   Debit to G/L account 350000 Invent-FG $1000.00 (Recv. Plt.)
The business feels the standard "Current Logic" does not give them the necessary visibility of In-Transit inventory in the G/L
Regards,
Michael

EDI Invoicing - Document contains same order item more than once

Hi,
While trying to post an inventory invoice with EDI, we are receiving the following error message: Document contains same order item more than once.
On the PO and the inter-company invoice, the same material come more then 1 time. Can you please tell me what I could do to fix that issue? Ideally we would like to do not modify the PO or Intercompany invoice so that the same material can come more than once.
Thanks
Martin

Hello,
maybe you've resolved this problem in the meantime.
I have encountered the exact same problem and will try solving this by setting the flag on field "GR-Bsd IV" in the purchase order at item level under the invoice tab.
Can you verify this?
Thanks,
Amber Morphis

How to Load data for Inventory Organizations

Hi All,
I have flat file containing data for following fields,
Organization Code, Name, From(Date), Location,Org Classification ,Primary Ledger, Legal Entity, Operating Unit ,Item Master Org, Material Account, Outside Processing, Material Overhead, Overhead, Resource, Expense Transfer Credit Inter Org Receivables, Inter Org Payables, Intransit Inventory, Invoice Price Variance, Inventory AP Accural, Expense AP Accural(Operating Unit Level), Encumbrance, Sales, Cost Of goods Sold, Deferred COGS Cost Variance, Receiving Inventory Account, Receiving Clearing Account.
Now i want to Load this data using API/Interface, any one has any idea which API's are present or any way of doing this.
Thanks and Regards,
Prashant

I have tried winparrot for such loading and now i have a lot of macro to load data from Excel to forms or to any browser.
I do not have a macro for your needs nevertheless it should be very easy to make it.
You can watch on youtube its tutorials for Oracle EBS.
Regards

Create Invoice from multiple GRPOs with Landed Costs

Hello all, again,
Sorry to bother again, but this one seems strange to me. Consider the following business process:
1) One Purchase Order is created in SAP, and sent to provider (no journal entry)
2) Several partial deliveries are received and posted to inventory (inventory @ invoices to be received)
3) Partial deliveries are pulled into Landed Costs document (inventory @ invoices to be received)
4) Steps 2) and 3) may be repeated several times
5) Invoice of provider is received, with the total amount as per PO
Now in step 5, I have no possibility of "pulling" the PO from step 1), neither pulling the GRPOs created in step 2), because they were used in the Landed Costs document. It is also not possible to "push" the PO to Invoices (only the open amount would be pushed, not the delivered amount). It is only possible to push a single GRPO to Invoices, resulting in lots of manual work and incorrect representation of provider's invoices (1 PO is delivered in up to 100 different shipments of varying quantity).
The only reasonable solution I see at the moment, is to use a service invoice and post it directly to the "invoices to be received" account. Or do you have any other ideas/solutions?
Thanks for your suggestions,
Joerg.

I should is correct. Yet it is not possible. I am using 2007 SP00, PL 47.
Do you think I should send the issue to SAP? Do you know of any notes about this issue?
Thanks,
Joerg.

In transit movement codes - missing amounts

Hi,
In one of my clients it's been implemented the "in transit" inventory procedure (still in development).
We went from having movement codes 647 and 101 in one step, into 641 and 101 in 2 steps. The problem that I see here is that when I go to check field "BW: Cost Val. in Local Currency" or "Local curr. amount", the values for movement code 101 is zero, while in the 641, I get the correct amount, and I need them completed in BW.
Is there any modification in the configuration that could be missed here?
Any idea on how we can have these fields correctly completed from the ECC side instead of BW?
Any help will be really appreciated.
Thanks,
Miriam

641- Is two step procedure wherein Stocks are removed from Unrestricted stock of sending location & place it in of stock in transit at recipient hence stock will reflect In Transit. On receiving goods recipient will take goods receipt with movement.
On the other hand 647 is one step procedure wherein goods receipt (101) is added automatically, so that the goods receipt is posted at the same time as the goods issue. hence stock will not be reflected in Transit

Stock in transit tracking

Hi all,
the requirement is to track the stock in transit against a give PO. Is it possible ?
Regards,
Yogesh

Hi Yogesh,
Similar to my previous thread, the inbound delivery stock in transit is not tracked in stock data. However, you can use inbound delivery information to calculate stock in transit. Here's how this can be done.
First, you use confirmation control key and set it up so the PO needs to have inbound delivery before it can perform goods receipt. Confirmation control key can be defaulted based on info record. Once you have this setup, you can then use table EKES to keep track of in transit inventory. The inbound delivery quantity (EKES-MENGE) is the total stock in transit, and you will have to subtract this number with the GR quantity for this inbound delivery (EKES-DABMG) to calculate the net stock in transit.
Now obviously this recommendation needs to be followed by processes to support it: buyer needs to record inbound delivery information through SAP transaction (VL31N), and GR cannot be done unless the inbound delivery is created.
Revi

FI Year End Closing

hi...
pls tell me t.code for following List for FI Year End Closing
1 Execute Report for InterCompany Activity & Journal Entries
2 Open posting period for next yr
3 Run Business Area's Assignment report.
4 Review list of recurring journal entries
5 Execute Recurring Entries for A/R, A/P, G/L
6 Process Parked A/R, A/P, G/L accounting documents
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire
8 Run Depreciation in Test Run and post
9 Verify Display Log for Depreciation Test Run
10 Capitalize AUC Assets if needed
11 Enter Payroll Data to SAP
12 Verify Depreciation Balances with GL balances
13 Post Depreciation
14 Execute Asset History Report, and retire assets if needed
15 Adjust specific depreciation areas if necessary
16 Reconcile AM subledger with GL
17 Check Bank Data
18 Review AR Open Items
19 Review AP Open Items
20 Execute Pending Invoices
21 Clear Open Item for GRIR, freight
22 Reconciliation of Financial Documents and transactional figures
23 Open new CO Posting Period
24 Compare current (cost estimates) with last current price (Moving Avg)
25 Update current cost price to material master price field.
26 Process Freight charges, Match SD freight to actual
27 Review Internal Order Postings
28 Settle All Orders
29 Verify All Post Goods Issue have been Invoiced (Billing Due List)
30 Review SD Billng Doc from prior mth that have not yet been released to accounting
31 Reconciliation of MM movements in Transit Intra-SAP to NonSAP
32 Reconcile PI Inventory with SAP
33 Perform Manual Adjustment if needed
34 Verify balance of the GR/IR account
35 Post Accruals and Deferrals
36 Clearing of Cancelled Documents
37 Check Profitability Segment Adjustment
38 Aging Report-Reconcile GL balances with subledger balances AP
39 Check the check run numbers
40 Bank reconciliation Data
41 Enter Tax Journal Entry
42 Reconcile GL balances with subledger balances AR/MM/AP
43 Display Balance Sheet Adjustments
44 Post Balance Sheet Adjustments
45 Post Foreign Currency Valuation (foreign exchange)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area
49 Check COGI--for both month end and year end
50 Doubtful receiviables
51 Verify In-transist Inventory
52 Reconcile PA to G/L
53 Post Cost Centre Assessments and Distributions
54 Run CO-FI Reconciliation to balance
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant
57 Fiscal Yr Balance carryforward AP/AR/AM
58 Fiscal Yr Balance carryforward CO
59 Fiscal Yr balance carryforward FI
60 Fiscal Yr balance carryforward PCA
61 Set Document number ranges - FI - new year
62 Set Document number ranges AP/AR - new year
63 Generate Financial statement Reports
64 Change Fiscal Year For Assets
65 Year end Closing-- Asset Accounting--final for year end
66 Close CO Posting Period
67 Close Prior A/R Posting Period
68 Close Prior A/P Posting Period
69 Close Prior MM Posting Period
70 Reverse accruals and deferrals for the new month
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd
Thanks & Regards
Rekha Sharma

Hi,
Please check this
1 Execute Report for Inter Company Activity & Journal Entries
2 Open posting period for next yr (T.Code: OB52)
3 Run Business Areau2019s Assignment report. (T.Code: F.50)
4 Review list of recurring journal entries (T.Code: FBD3)
5 Execute Recurring Entries for A/R, A/P, G/L (T. Code: F.14)
6 Process Parked A/R, A/P, G/L accounting documents (T.Code: FBV0)
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire (T.Code: ABUMN)
8 Run Depreciation in Test Run and post (T.Code: AFAB)
9 Verify Display Log for Depreciation Test Run (T.Code: AFBP)
10 Capitalize AUC Assets if needed (T.Code: AIAB, AIBU)
11 Enter Payroll Data to SAP (T.Code: CAT2)
12 Verify Depreciation Balances with GL balances ( T.Code: ABST2)
13 Post Depreciation (T.Code: AFAB)
14 Execute Asset History Report, and retire assets if needed (T.Code: S_ALR_87011963, ABAVN)
15 Adjust specific depreciation areas if necessary (T.Code: ABCO)
16 Reconcile AM sub ledger with GL (T.Code: ABST2)
17 Check Bank Data (T.Code: S_P99_41000212)
18 Review AR Open Items (T.Code: FBL5N)
19 Review AP Open Items (FBL1N)
20 Execute Pending Invoices(T.Code: MRBP)
21 Clear Open Item for GRIR, freight (T.Code: F.13)
22 Reconciliation of Financial Documents and transactional figures (F.03)
23 Open new CO Posting Period: (T.Code: OKP1)
24 Compare current (cost estimates) with last current price (Moving Avg) ( T.Code: OKBH)
25 Update current cost price to material master price field (T.Code: CK11N, CK24)
26 Process Freight charges, Match SD freight to actual (T.Code: V-31)
27 Review Internal Order Postings(T.Code: OKSA)
28 Settle All Orders (T.Code: KO88)
29 Verify All Post Goods Issue have been Invoiced (Billing Due List) (T.Code: VF04)
30 Review SD Billing Doc from prior month that have not yet been released to accounting (T.Code : F.2D)
31 Reconciliation of MM movements in Transit Intra-SAP to Non SAP
32 Reconcile PI Inventory with SAP (T.Code: MI07)
33 Perform Manual Adjustment if needed (T.Code: F-02, FB50)
34 Verify balance of the GR/IR account ( T.Code: MB5S)
35 Post Accruals and Deferrals (T.Code: FBS1)
36 Clearing of Cancelled Documents (T.Code: F-03, F-32, F-44)
37 Check Profitability Segment Adjustment (T.Code: KISR)
38 Aging Report-Reconcile GL balances with sub ledger balances AP ( T.code: FBL1N, FBL5N, FBL3N)
39 Check the check run numbers (T.Code: FCH1, FCHI)
40 Bank reconciliation Data (T.Code: FF67 & FEBA)
41 Enter Tax Journal Entry (T.Code: FB41)
42 Reconcile GL balances with sub ledger balances AR/MM/AP ( T.Code: F.03)
43 Display Balance Sheet Adjustments (T.Code: F.5F)
44 Post Balance Sheet Adjustments (T.Code: F.5E)
45 Post Foreign Currency Valuation (foreign exchange) (T.Code: F.05)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area (T.Code: GGB0)
49 Check COGIu2013for both month end and year end
50 Doubtful receivables (T.Code : F104)
51 Verify In-transit Inventory
52 Reconcile PA to G/L (T.Code: KE5U)
53 Post Cost Center Assessments and Distributions (T.Code: KSU5 & KSV5)
54 Run CO-FI Reconciliation to balance (T.Code: KALC)
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant (T.Code: KCRQ)
57 Fiscal Yr Balance carry forward AP/AR/AM (T.Code: F.07,
58 Fiscal Yr Balance carry forward CO (T.Code: CXS1)
59 Fiscal Yr balance carry forward FI ( T.Code: F.16)
60 Fiscal Yr balance carry forward PCA (T.Code: 2KES)
61 Set Document number ranges - FI - new year (T.Code: OBH2, OBA7)
62 Set Document number ranges AP/AR - new year (OBA7)
63 Generate Financial statement Reports ( T.Code:OB58) OR (T.Code: FSE2)
64 Change Fiscal Year For Assets (T.Code: AJRW)
65 Year end Closingu2013 Asset Accountingu2013final for year end (T.Code: AJAB)
66 Close CO Posting Period : (T.Code: OKP1)
67 Close Prior A/R Posting Period ( T.Code: OB52)
68 Close Prior A/P Posting Period (T.Code: OB52)
69 Close Prior MM Posting Period (T.Code: OMSY)
70 Reverse accruals and deferrals for the new month (T.Code: F.81)
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year ( T.Code: FNSL)
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd (T.Code: F.16)
Regards,

Steps for Period end closing

Hi All,
Can any one please provide me with the actual steps towards Period end Closing and year end closing for Financial Closing.By step I mean steps in order i.e which step will be followed by which one.
This is urgent
Pinee

Hi
http://www.sap-basis-abap.com/fico/sap-fi-month-end-and-year-end-activities.htm
First you will have to close the Posting period in the Materials Management side. To do this use the T.Code MMPV and give the period that needs to be Opened. Once this is done you will not be able to Post any Material Documents in the previous period.
Now at the Financial side you need to open the next period and at the same time you need to close the Previous period. This can be done in T.Code OB52
here is the list for FI/CO year end closing check list:
now i am sending one document with T.codes
CLOSING ACTIVITIES
1 Execute Report for Inter Company Activity & Journal Entries
2 Open posting period for next yr (T.Code: OB52)
3 Run Business Area's Assignment report. (T.Code: F.50)
4 Review list of recurring journal entries (T.Code: FBD3)
5 Execute Recurring Entries for A/R, A/P, G/L (T. Code: F.14)
6 Process Parked A/R, A/P, G/L accounting documents (T.Code: FBV0)
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire (T.Code: ABUMN)
8 Run Depreciation in Test Run and post (T.Code: AFAB)
9 Verify Display Log for Depreciation Test Run (T.Code: AFBP)
10 Capitalize AUC Assets if needed (T.Code: AIAB, AIBU)
11 Enter Payroll Data to SAP (T.Code: CAT2)
12 Verify Depreciation Balances with GL balances (T.Code: ABST2)
13 Post Depreciation (T.Code: AFAB)
14 Execute Asset History Report, and retire assets if needed (T.Code: S_ALR_87011963, ABAVN)
15 Adjust specific depreciation areas if necessary (T.Code: ABCO)
16 Reconcile AM sub ledger with GL (T.Code: ABST2)
17 Check Bank Data (T.Code: S_P99_41000212)
18 Review AR Open Items (T.Code: FBL5N)
19 Review AP Open Items (FBL1N)
20 Execute Pending Invoices(T.Code: MRBP)
21 Clear Open Item for GRIR, freight (T.Code: F.13)
22 Reconciliation of Financial Documents and transactional figures (F.03)
23 Open new CO Posting Period: (T.Code: OKP1)
24 Compare current (cost estimates) with last current price (Moving Avg) (T.Code: OKBH)
25 Update current cost price to material master price field (T.Code: CK11N, CK24)
26 Process Freight charges, Match SD freight to actual (T.Code: V-31)
27 Review Internal Order Postings(T.Code: OKSA)
28 Settle All Orders (T.Code: KO88)
29 Verify All Post Goods Issue have been Invoiced (Billing Due List) (T.Code: VF04)
30 Review SD Billing Doc from prior month that have not yet been released to accounting (T.Code: F.2D)
31 Reconciliation of MM movements in Transit Intra-SAP to Non SAP
32 Reconcile PI Inventory with SAP (T.Code: MI07)
33 Perform Manual Adjustment if needed (T.Code: F-02, FB50)
34 Verify balance of the GR/IR account (T.Code: MB5S)
35 Post Accruals and Deferrals (T.Code: FBS1)
36 Clearing of Cancelled Documents (T.Code: F-03, F-32, F-44)
37 Check Profitability Segment Adjustment (T.Code: KISR)
38 Aging Report-Reconcile GL balances with sub ledger balances AP (T.code: FBL1N, FBL5N, FBL3N)
39 Check the check run numbers (T.Code: FCH1, FCHI)
40 Bank reconciliation Data (T.Code: FF67 & FEBA)
41 Enter Tax Journal Entry (T.Code: FB41)
42 Reconcile GL balances with sub ledger balances AR/MM/AP (T.Code: F.03)
43 Display Balance Sheet Adjustments (T.Code: F.5F)
44 Post Balance Sheet Adjustments (T.Code: F.5E)
45 Post Foreign Currency Valuation (foreign exchange) (T.Code: F.05)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area (T.Code: GGB0)
49 Check COGI--for both month end and year end
50 Doubtful receivables (T.Code: F104)
51 Verify In-transit Inventory
52 Reconcile PA to G/L (T.Code: KE5U)
53 Post Cost Center Assessments and Distributions (T.Code: KSU5 & KSV5)
54 Run CO-FI Reconciliation to balance (T.Code: KALC)
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant (T.Code: KCRQ)
57 Fiscal Yr Balance carry forward AP/AR/AM (T.Code: F.07,
58 Fiscal Yr Balance carry forward CO (T.Code: CXS1)
59 Fiscal Yr balance carry forward FI (T.Code: F.16)
60 Fiscal Yr balance carry forward PCA (T.Code: 2KES)
61 Set Document number ranges - FI - new year (T.Code: OBH2, OBA7)
62 Set Document number ranges AP/AR - new year (OBA7)
63 Generate Financial statement Reports (T.Code:OB58) OR (T.Code: FSE2)
64 Change Fiscal Year For Assets (T.Code: AJRW)
65 Year end Closing-- Asset Accounting--final for year end (T.Code: AJAB)
66 Close CO Posting Period : (T.Code: OKP1)
67 Close Prior A/R Posting Period (T.Code: OB52)
68 Close Prior A/P Posting Period (T.Code: OB52)
69 Close Prior MM Posting Period (T.Code: OMSY)
70 Reverse accruals and deferrals for the new month (T.Code: F.81)
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year (T.Code: FNSL)
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd (T.Code: F.16)
Month end closing Activities
1. All the expenses including amortization, prepaid expenses, Preliminary expenses and accruals have been booked.
2. Complete Bank Reconciliation (T.Code: FF67)
3. Make sure that Sum of Inter company balances is Zero
4. Suspense Accounts should be cleared regularly.
5. Ensure that all documents related to MM & SD have been entered in system. (T.Code:F-22 & F-43)
6. Ensure that all billing documents are released to accounting.
7. Calculate Overheads on all process Orders (CO43)
8. Technically complete all process orders which are fully processed (CORM).
9. Calculate Variance (KKS1)à (Relevant only if Standard cost is calculated).
10. Settle all process orders which are technically complete (CO88).
11. Close All settled Process Orders
12. Close MM period (Transaction Code: MMPV).
13. Carry out GR/IR clearing (F.13) transaction
14. Depreciation Run (AFAB) has been carried out for the month
15. Close FI Posting period after the month end closing activity is over (T.Code:OB52)
Year end closing Activities:
1. Calculate production work in progress on process orders which are not technically complete. (CO88).
2. Carry out Assessment cycle for Cost Centers.(T.Code: KSUB)
3. All month end closing Activities should be carried out.
4. Carry Forward Balances to next year
(With TC: F.16 we can carry forward the balance to next year.
With TC: OBH2 copy the number ranges to next year
Open next year periods by selecting the Posting Period Variant.
then test by posting the transaction in F-02)
Hope ths helps
Please reward points
Sunil

Reg period end

hi gurus
can provide me check list for month end and period end activities
as i know month end activities but my client is asking serial wise which means which one will come first like period closing we have do first or accruals defferal gr/ir clearing
please respond immediately its urgent
guru
[email protected]

hai,
The following is the Month end & year end activities.
Please select the year end and month end activities based on your business requirement and configuration.
Period End Close
YEAR END & MONTH END CLOSING ACTIVITY
First you will have to close the Posting period in the Materials Management side. To do this use the T.Code MMPV and give the period that needs to be Opened. Once this is done you will not be able to Post any Material Documents in the previous period.
Now at the Financial side you need to open the next period and at the same time you need to close the Previous period. This can be done in T.Code OB52
here is the list for FI/CO year end closing check list:
now i am sending one document with T.codes
CLOSING ACTIVITIES
1 Execute Report for Inter Company Activity & Journal Entries
2 Open posting period for next yr (T.Code: OB52)
3 Run Business Area's Assignment report. (T.Code: F.50)
4 Review list of recurring journal entries (T.Code: FBD3)
5 Execute Recurring Entries for A/R, A/P, G/L (T. Code: F.14)
6 Process Parked A/R, A/P, G/L accounting documents (T.Code: FBV0)
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire (T.Code: ABUMN)
8 Run Depreciation in Test Run and post (T.Code: AFAB)
9 Verify Display Log for Depreciation Test Run (T.Code: AFBP)
10 Capitalize AUC Assets if needed (T.Code: AIAB, AIBU)
11 Enter Payroll Data to SAP (T.Code: CAT2)
12 Verify Depreciation Balances with GL balances ( T.Code: ABST2)
13 Post Depreciation (T.Code: AFAB)
14 Execute Asset History Report, and retire assets if needed (T.Code: S_ALR_87011963, ABAVN)
15 Adjust specific depreciation areas if necessary (T.Code: ABCO)
16 Reconcile AM sub ledger with GL (T.Code: ABST2)
17 Check Bank Data (T.Code: S_P99_41000212)
18 Review AR Open Items (T.Code: FBL5N)
19 Review AP Open Items (FBL1N)
20 Execute Pending Invoices(T.Code: MRBP)
21 Clear Open Item for GRIR, freight (T.Code: F.13)
22 Reconciliation of Financial Documents and transactional figures (F.03)
23 Open new CO Posting Period: (T.Code: OKP1)
24 Compare current (cost estimates) with last current price (Moving Avg) ( T.Code: OKBH)
25 Update current cost price to material master price field (T.Code: CK11N, CK24)
26 Process Freight charges, Match SD freight to actual (T.Code: V-31)
27 Review Internal Order Postings(T.Code: OKSA)
28 Settle All Orders (T.Code: KO88)
29 Verify All Post Goods Issue have been Invoiced (Billing Due List) (T.Code: VF04)
30 Review SD Billing Doc from prior month that have not yet been released to accounting (T.Code : F.2D)
31 Reconciliation of MM movements in Transit Intra-SAP to Non SAP
32 Reconcile PI Inventory with SAP (T.Code: MI07)
33 Perform Manual Adjustment if needed (T.Code: F-02, FB50)
34 Verify balance of the GR/IR account ( T.Code: MB5S)
35 Post Accruals and Deferrals (T.Code: FBS1)
36 Clearing of Cancelled Documents (T.Code: F-03, F-32, F-44)
37 Check Profitability Segment Adjustment (T.Code: KISR)
38 Aging Report-Reconcile GL balances with sub ledger balances AP ( T.code: FBL1N, FBL5N, FBL3N)
39 Check the check run numbers (T.Code: FCH1, FCHI)
40 Bank reconciliation Data (T.Code: FF67 & FEBA)
41 Enter Tax Journal Entry (T.Code: FB41)
42 Reconcile GL balances with sub ledger balances AR/MM/AP ( T.Code: F.03)
43 Display Balance Sheet Adjustments (T.Code: F.5F)
44 Post Balance Sheet Adjustments (T.Code: F.5E)
45 Post Foreign Currency Valuation (foreign exchange) (T.Code: F.05)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area (T.Code: GGB0)
49 Check COGI--for both month end and year end
50 Doubtful receivables (T.Code : F104)
51 Verify In-transit Inventory
52 Reconcile PA to G/L (T.Code: KE5U)
53 Post Cost Center Assessments and Distributions (T.Code: KSU5 & KSV5)
54 Run CO-FI Reconciliation to balance (T.Code: KALC)
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant (T.Code: KCRQ)
57 Fiscal Yr Balance carry forward AP/AR/AM (T.Code: F.07,
58 Fiscal Yr Balance carry forward CO (T.Code: CXS1)
59 Fiscal Yr balance carry forward FI ( T.Code: F.16)
60 Fiscal Yr balance carry forward PCA (T.Code: 2KES)
61 Set Document number ranges - FI - new year (T.Code: OBH2, OBA7)
62 Set Document number ranges AP/AR - new year (OBA7)
63 Generate Financial statement Reports ( T.Code:OB58) OR (T.Code: FSE2)
64 Change Fiscal Year For Assets (T.Code: AJRW)
65 Year end Closing-- Asset Accounting--final for year end (T.Code: AJAB)
66 Close CO Posting Period : (T.Code: OKP1)
67 Close Prior A/R Posting Period ( T.Code: OB52)
68 Close Prior A/P Posting Period (T.Code: OB52)
69 Close Prior MM Posting Period (T.Code: OMSY)
70 Reverse accruals and deferrals for the new month (T.Code: F.81)
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year ( T.Code: FNSL)
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd (T.Code: F.16)
Month end closing Activities
1. All the expenses including amortization, prepaid expenses, Preliminary expenses and accruals have been booked.
2. Complete Bank Reconciliation (T.Code: FF67)
3. Make sure that Sum of Inter company balances is Zero
4. Suspense Accounts should be cleared regularly.
5. Ensure that all documents related to MM & SD have been entered in system. ( T.Code:F-22 & F-43)
6. Ensure that all billing documents are released to accounting.
7. Calculate Overheads on all process Orders (CO43)
8. Technically complete all process orders which are fully processed (CORM).
9. Calculate Variance (KKS1)à (Relevant only if Standard cost is calculated).
10. Settle all process orders which are technically complete (CO88).
11. Close All settled Process Orders
12. Close MM period (Transaction Code: MMPV).
13. Carry out GR/IR clearing (F.13) transaction
14. Depreciation Run (AFAB) has been carried out for the month
15. Close FI Posting period after the month end closing activity is over (T.Code:OB52)
Year end closing Activities:
1. Calculate production work in progress on process orders which are not technically complete. (CO88).
2. Carry out Assessment cycle for Cost Centers.(T.Code: KSUB)
3. All month end closing Activities should be carried out.
4. Carry Forward Balances to next year
(With TC: F.16 we can carry forward the balance to next year.
With TC: OBH2 copy the number ranges to next year
Open next year periods by selecting the Posting Period Variant.
then test by posting the transaction in F-02)
Pls award points.
govind.

COGS should not be reflected on delivery

One big customer has just required that all the month deliveries will be invoiced after the month end.
We dont want to have a big COGS at the end of the month. So the request its that deliveries hit a "in transit" account after hitting the usual Inventory and COGS accounts.
Since I only have one step to do it (delivery), I did it directly (delivery hits inventory/in transit inventory), now my problem its that now the delivery account movement does not go throught COGS account, its that a requirement that has to be done?
I also created the invoice for this delivery and it hits the same accounts as a regular invoice (client, sales and tax)
Is this correct by finance standards? or how can I check that its right?
Thank you,
Carlos

Hi
I am not clear as to what you want
But, if you want to hit a transit account @ PGI and then credit this @ Billing and Debit your COGS a/c - Yes, it is possible
You need to create an accrual key and use it in your SD pricing procedure.. your SD consultant will know how to do this
At COGS - Transit a/c will be Dr and Inventory a.c will be Cr
At Billing - Customer a/c Dr and Sales a.c Cr... Apart from this, COGS will be Dr and Transit a/c will be Cr
If this is what you want, it is possible
Regards
Ajay M

In-Transit Inventory invoices

Similar Messages

Maybe you are looking for