Inbound BOMMAT idocs failing with MSG BOM 023

We're taking in BOMMAT idocs into an ECC6.0 system from an external system and I have some failed idocs with message BOM 023 - local BOM <material> <plant> <alternative> cannot be changed via ALE.
We're doing create and change functions - this one is a change with MSGFN = 005
There are no multiple BOMS, alternative 1 the only 1.
I haven't been able to find any sensible explanation for this message and I haven't seen it before . Can anyone throw any light on it?
Thanks,
Jonathan

Hi Jonathan,
You are trying to change a BOM on SAP that was not initially transfered-created via the interface. Instead it was firstly created manually on SAP. For this reason you get the message for local BOM that cannot be changed via ALE. You can also confirm this also by the ALE indicator on BOM header (field STKO-ALEKZ for the given BOM).
Br,
Petros

Similar Messages

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

Download and conversion fails with msg...."Must close dialogue box to continue." I have no such box

download and conersion of pdf to word fails with msg, "cannot download until you close dialogue box." I have no such box open. How to proceed?

Hi,
If you are using createPDF or exportPDF services, please submit your question to their forum at http://forums.adobe.com/community/createpdf.
Thanks,
Wenlan

Idoc failed with status 51 for Warning/Information messages

Hi All,
We are trying to create some Sales Orders with the help of Idocs. We are facing some problem as mentioned below.
1.There are some warning messages/information messages written in standard Sales Order User Exit USEREXIT_SAVE_DOCUMENT_PREPARE
2.As soon as the Idoc processing reaches any of these messages, it considers them as ERROR message and Idoc fails with the status as 51 which is not expected.
3.Also, I see that the Sales Order is saved with the data that has been passed in the Idoc.
Is this the standard behavior ?? (Or) Is there any EDI related configuration setting which can be used to suppress these kind of messages in Idoc Processing ??
Any help on this would be highly appreciated.
Thanks,
Babu Kilari

if your IDOC has status 51 then it is not posted, hence your sales order cannot be created from this IDOC. of course this error behaviour can be originated by the user exit.
please read OSS note Note 747631 - Some tips when testing idoc_input_orders

BACKUP LOG suddenly failed with Msg 35250, Level 16, State 11 The connection to the primary replica is not active. The command cannot be processed.

I have AlwaysOn SQL 2012 Enterprise set-up using Windows Failover Clustering Services (not FCI), and have 1 Primary node (P), 1 Synchronous Commit Auto Failover (SC), and 1 Asynchronous Commit Manual Failover (AC) node. It is set up to prefer secondary,
with the highest priority given to AC node.
I am using Ola Hollengren's scripts for Database Maintenance jobs, including a native BACKUP LOG job for the transaction logs of all user databases on a 1 minute schedule. His scripts already consider AlwaysOn, and although the job is set-up on all
3 nodes, only ever runs on AC node.
The job has been running successfully since initial set-up almost 1 year ago, but suddenly yesterday morning started to fail with the following error, only on 1 of the 13 databases in my availability group:
Date and time: 2014-06-08 09:36:11
Command: BACKUP LOG [my_db] TO DISK = N'E:\MSSQL\\Transaction Dumps\my_db\MySQLCL$MySQLAG_my_db_20140608_093610_U_LOG.trn' WITH CHECKSUM, COMPRESSION
Msg 35250, Level 16, State 11, Server AC, Line 1
The connection to the primary replica is not active. The command cannot be processed.
Msg 3013, Level 16, State 1, Server AC, Line 1
BACKUP LOG is terminating abnormally.
Outcome: Failed
Duration: 00:01:00
The other 12 databases continued to backup successfully.
Checking the Availability Group dashboard, windows event logs, and SQL Server error logs, including Failover Cluster events showed no issues.
However, monitoring software (Idera SQLdm) showed blocked sessions on P node. When I ran sp_who2, it showed that a background process was being blocked by another background process with an HADR BACKUP LOCK.
Since both processes were background processes, I was unable to kill either process. I temporarily disabled the transaction log backup job, but the blocked process was still active.
I ran DBCC CHECKDB (my_db) WITH all_errormsgs, no_infomsgs, data_purity on both P and AC nodes, with no errors. However, on AC node, it also showed 1 transaction rolled forward and 0 transactions rolled back. This also had the effect of releasing
the blocked background process, but another background process was now blocking with the same HADR BACKUP LOCK.
I tried to restart SQL Server Agent on AC node, which did not immediately seem to work. However, after a few minutes, I noticed that the block had disappeared. I re-enabled the transaction log backup job on AC and it started working normally
again. The error has not occurred again, but I am at a loss as to what happened, and how to prevent it from happening again.
Any help would be greatly appreciated.
Diane

And here is part 2 of the stored procedure:
--// Execute backup commands //--
WHILE EXISTS (SELECT * FROM @tmpDatabases WHERE Selected = 1 AND Completed = 0)
BEGIN
SELECT TOP 1 @CurrentDBID = ID,
@CurrentDatabaseName = DatabaseName,
@CurrentDatabaseNameFS = DatabaseNameFS,
@CurrentDatabaseType = DatabaseType
FROM @tmpDatabases
WHERE Selected = 1
AND Completed = 0
ORDER BY ID ASC
SET @CurrentDatabaseID = DB_ID(@CurrentDatabaseName)
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
BEGIN
IF EXISTS (SELECT * FROM sys.database_recovery_status WHERE database_id = @CurrentDatabaseID AND database_guid IS NOT NULL)
BEGIN
SET @CurrentIsDatabaseAccessible = 1
END
ELSE
BEGIN
SET @CurrentIsDatabaseAccessible = 0
END
END
ELSE
BEGIN
SET @CurrentIsDatabaseAccessible = 0
END
SELECT @CurrentDifferentialBaseLSN = differential_base_lsn
FROM sys.master_files
WHERE database_id = @CurrentDatabaseID
AND [type] = 0
AND [file_id] = 1
-- Workaround for a bug in SQL Server 2005
IF @Version >= 9 AND @Version < 10
AND EXISTS(SELECT * FROM sys.master_files WHERE database_id = @CurrentDatabaseID AND [type] = 0 AND [file_id] = 1 AND differential_base_lsn IS NOT NULL AND differential_base_guid IS NOT NULL AND differential_base_time IS NULL)
BEGIN
SET @CurrentDifferentialBaseLSN = NULL
END
SELECT @CurrentDifferentialBaseIsSnapshot = is_snapshot
FROM msdb.dbo.backupset
WHERE database_name = @CurrentDatabaseName
AND [type] = 'D'
AND checkpoint_lsn = @CurrentDifferentialBaseLSN
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
BEGIN
SELECT @CurrentLogLSN = last_log_backup_lsn
FROM sys.database_recovery_status
WHERE database_id = @CurrentDatabaseID
END
SET @CurrentBackupType = @BackupType
IF @ChangeBackupType = 'Y'
BEGIN
IF @CurrentBackupType = 'LOG' AND DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') <> 'SIMPLE' AND @CurrentLogLSN IS NULL AND @CurrentDatabaseName <> 'master'
BEGIN
SET @CurrentBackupType = 'DIFF'
END
IF @CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL AND @CurrentDatabaseName <> 'master'
BEGIN
SET @CurrentBackupType = 'FULL'
END
END
IF @CurrentBackupType = 'LOG'
BEGIN
SELECT @CurrentLatestBackup = MAX(backup_finish_date)
FROM msdb.dbo.backupset
WHERE [type] IN('D','I')
AND is_damaged = 0
AND database_name = @CurrentDatabaseName
END
IF @Version >= 11 AND @Cluster IS NOT NULL
BEGIN
SELECT @CurrentAvailabilityGroup = availability_groups.name,
@CurrentAvailabilityGroupRole = dm_hadr_availability_replica_states.role_desc
FROM sys.databases databases
INNER JOIN sys.availability_databases_cluster availability_databases_cluster ON databases.group_database_id = availability_databases_cluster.group_database_id
INNER JOIN sys.availability_groups availability_groups ON availability_databases_cluster.group_id = availability_groups.group_id
INNER JOIN sys.dm_hadr_availability_replica_states dm_hadr_availability_replica_states ON availability_groups.group_id = dm_hadr_availability_replica_states.group_id AND databases.replica_id = dm_hadr_availability_replica_states.replica_id
WHERE databases.name = @CurrentDatabaseName
END
IF @Version >= 11 AND @Cluster IS NOT NULL AND @CurrentAvailabilityGroup IS NOT NULL
BEGIN
SELECT @CurrentIsPreferredBackupReplica = sys.fn_hadr_backup_is_preferred_replica(@CurrentDatabaseName)
END
SELECT @CurrentDatabaseMirroringRole = UPPER(mirroring_role_desc)
FROM sys.database_mirroring
WHERE database_id = @CurrentDatabaseID
IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_primary_databases WHERE primary_database = @CurrentDatabaseName)
BEGIN
SET @CurrentLogShippingRole = 'PRIMARY'
END
ELSE
IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_secondary_databases WHERE secondary_database = @CurrentDatabaseName)
BEGIN
SET @CurrentLogShippingRole = 'SECONDARY'
END
-- Set database message
SET @DatabaseMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Database: ' + QUOTENAME(@CurrentDatabaseName) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Status: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Standby: ' + CASE WHEN DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Updateability: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Updateability') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'User access: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Is accessible: ' + CASE WHEN @CurrentIsDatabaseAccessible = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Recovery model: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') AS nvarchar) + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group: ' + @CurrentAvailabilityGroup + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group role: ' + @CurrentAvailabilityGroupRole + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Is preferred backup replica: ' + CASE WHEN @CurrentIsPreferredBackupReplica = 1 THEN 'Yes' WHEN @CurrentIsPreferredBackupReplica = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
IF @CurrentDatabaseMirroringRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Database mirroring role: ' + @CurrentDatabaseMirroringRole + CHAR(13) + CHAR(10)
IF @CurrentLogShippingRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Log shipping role: ' + @CurrentLogShippingRole + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Differential base LSN: ' + ISNULL(CAST(@CurrentDifferentialBaseLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Differential base is snapshot: ' + CASE WHEN @CurrentDifferentialBaseIsSnapshot = 1 THEN 'Yes' WHEN @CurrentDifferentialBaseIsSnapshot = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Last log backup LSN: ' + ISNULL(CAST(@CurrentLogLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
SET @DatabaseMessage = REPLACE(@DatabaseMessage,'%','%%') + ' '
RAISERROR(@DatabaseMessage,10,1) WITH NOWAIT
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
AND NOT (DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') = 'SINGLE_USER' AND @CurrentIsDatabaseAccessible = 0)
AND DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 0
AND NOT (@CurrentBackupType = 'LOG' AND (DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') = 'SIMPLE' OR @CurrentLogLSN IS NULL))
AND NOT (@CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL)
AND NOT (@CurrentBackupType IN('DIFF','LOG') AND @CurrentDatabaseName = 'master')
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'N' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'Y' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'DIFF' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'N' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'Y' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT ((@CurrentLogShippingRole = 'PRIMARY' AND @CurrentLogShippingRole IS NOT NULL) AND @CurrentBackupType = 'LOG')
BEGIN
-- Set variables
SET @CurrentDate = GETDATE()
IF @CleanupTime IS NULL OR (@CurrentBackupType = 'LOG' AND @CurrentLatestBackup IS NULL) OR @CurrentBackupType <> @BackupType
BEGIN
SET @CurrentCleanupDate = NULL
END
ELSE
IF @CurrentBackupType = 'LOG'
BEGIN
SET @CurrentCleanupDate = (SELECT MIN([Date]) FROM(SELECT DATEADD(hh,-(@CleanupTime),@CurrentDate) AS [Date] UNION SELECT @CurrentLatestBackup AS [Date]) Dates)
END
ELSE
BEGIN
SET @CurrentCleanupDate = DATEADD(hh,-(@CleanupTime),@CurrentDate)
END
SELECT @CurrentFileExtension = CASE
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'FULL' THEN 'bak'
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'DIFF' THEN 'bak'
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'LOG' THEN 'trn'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'FULL' THEN 'bak'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'DIFF' THEN 'bak'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'LOG' THEN 'trn'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'FULL' THEN 'sqb'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'DIFF' THEN 'sqb'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'LOG' THEN 'sqb'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'FULL' THEN 'safe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'DIFF' THEN 'safe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'LOG' THEN 'safe'
END
INSERT INTO @CurrentDirectories (ID, DirectoryPath, CreateCompleted, CleanupCompleted)
SELECT ROW_NUMBER() OVER (ORDER BY ID), DirectoryPath + CASE WHEN RIGHT(DirectoryPath,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END, 0, 0
FROM @Directories
ORDER BY ID ASC
SET @CurrentFileNumber = 0
SET @CurrentMirrorFilePath = NULL
WHILE @CurrentFileNumber < @NumberOfFiles
BEGIN
SET @CurrentFileNumber = @CurrentFileNumber + 1
SELECT @CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE @CurrentFileNumber >= (ID - 1) * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories) + 1
AND @CurrentFileNumber <= ID * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories)
SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
IF LEN(@CurrentFilePath) > 257
BEGIN
SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
END
IF @CurrentFileNumber = 1 AND LEN(@MirrorDirectory) > 0
BEGIN
SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
IF LEN(@CurrentFilePath) > 257
BEGIN
SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
END
END
INSERT INTO @CurrentFiles (CurrentFilePath)
SELECT @CurrentFilePath
SET @CurrentDirectoryPath = NULL
SET @CurrentFilePath = NULL
END
-- Create directory
WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateCompleted = 0)
BEGIN
SELECT TOP 1 @CurrentDirectoryID = ID,
@CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE CreateCompleted = 0
ORDER BY ID ASC
SET @CurrentCommandType01 = 'xp_create_subdir'
SET @CurrentCommand01 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_create_subdir N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''' IF @ReturnCode <> 0 RAISERROR(''Error creating directory.'', 16, 1)'
EXECUTE @CurrentCommandOutput01 = [dbo].[CommandExecute] @Command = @CurrentCommand01, @CommandType = @CurrentCommandType01, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput01 = @Error
IF @CurrentCommandOutput01 <> 0 SET @ReturnCode = @CurrentCommandOutput01
UPDATE @CurrentDirectories
SET CreateCompleted = 1,
CreateOutput = @CurrentCommandOutput01
WHERE ID = @CurrentDirectoryID
SET @CurrentDirectoryID = NULL
SET @CurrentDirectoryPath = NULL
SET @CurrentCommand01 = NULL
SET @CurrentCommandOutput01 = NULL
SET @CurrentCommandType01 = NULL
END
-- Perform a backup
IF NOT EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateOutput <> 0 OR CreateOutput IS NULL)
BEGIN
IF @BackupSoftware IS NULL
BEGIN
SELECT @CurrentCommandType02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP_DATABASE'
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP_LOG'
END
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @Compress = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION'
IF @Compress = 'N' AND @Version >= 10 SET @CurrentCommand02 = @CurrentCommand02 + ', NO_COMPRESSION'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SELECT @CurrentCommandType02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'xp_backup_database'
WHEN @CurrentBackupType = 'LOG' THEN 'xp_backup_log'
END
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_database @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
WHEN @CurrentBackupType = 'LOG' THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_log @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
END
SELECT @CurrentCommand02 = @CurrentCommand02 + ', @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ', @with = '''
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
SET @CurrentCommand02 = @CurrentCommand02 + ''''
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @read_write_filegroups = 1'
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CAST(@CompressionLevel AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @buffercount = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @maxtransfersize = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
IF @Throttle IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @throttle = ' + CAST(@Throttle AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @cryptlevel = ' + CASE
WHEN @EncryptionType = 'RC2-40' THEN '0'
WHEN @EncryptionType = 'RC2-56' THEN '1'
WHEN @EncryptionType = 'RC2-112' THEN '2'
WHEN @EncryptionType = 'RC2-128' THEN '3'
WHEN @EncryptionType = '3DES-168' THEN '4'
WHEN @EncryptionType = 'RC4-128' THEN '5'
WHEN @EncryptionType = 'AES-128' THEN '6'
WHEN @EncryptionType = 'AES-192' THEN '7'
WHEN @EncryptionType = 'AES-256' THEN '8'
END
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing LiteSpeed backup.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType02 = 'sqlbackup'
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION = ' + CAST(@CompressionLevel AS nvarchar)
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', THREADCOUNT = ' + CAST(@Threads AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', KEYSIZE = ' + CASE
WHEN @EncryptionType = 'AES-128' THEN '128'
WHEN @EncryptionType = 'AES-256' THEN '256'
END
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand02,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLBackup backup.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType02 = 'BACKUP_DATABASE'
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType02 = 'xp_ss_backup'
SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_backup @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
SELECT @CurrentCommand02 = @CurrentCommand02 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
IF @CurrentMirrorFilePath IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @mirrorfile = N''' + @CurrentMirrorFilePath + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ', @backuptype = ' + CASE WHEN @CurrentBackupType = 'FULL' THEN '''Full''' WHEN @CurrentBackupType = 'DIFF' THEN '''Differential''' WHEN @CurrentBackupType = 'LOG' THEN '''Log''' END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @readwritefilegroups = 1'
SET @CurrentCommand02 = @CurrentCommand02 + ', @checksum = ' + CASE WHEN @CheckSum = 'Y' THEN '1' WHEN @CheckSum = 'N' THEN '0' END
SET @CurrentCommand02 = @CurrentCommand02 + ', @copyonly = ' + CASE WHEN @CopyOnly = 'Y' THEN '1' WHEN @CopyOnly = 'N' THEN '0' END
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CASE WHEN @CompressionLevel = 5 THEN N'ispeed' WHEN @CompressionLevel = 6 THEN N'isize' ELSE CAST(@CompressionLevel AS nvarchar) END
IF @RetryWrites IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @retrywrites = N''' + @RetryWrites + ''''
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptiontype = N''' + CASE
WHEN @EncryptionType = 'AES-128' THEN 'AES128'
WHEN @EncryptionType = 'AES-256' THEN 'AES256'
END + ''''
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptedbackuppassword = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLsafe backup.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput02 = [dbo].[CommandExecute] @Command = @CurrentCommand02, @CommandType = @CurrentCommandType02, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput02 = @Error
IF @CurrentCommandOutput02 <> 0 SET @ReturnCode = @CurrentCommandOutput02
END
-- Verify the backup
IF @CurrentCommandOutput02 = 0 AND @Verify = 'Y'
BEGIN
IF @BackupSoftware IS NULL
BEGIN
SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SET @CurrentCommandType03 = 'xp_restore_verifyonly'
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_restore_verifyonly'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ', @with = '''
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
SET @CurrentCommand03 = @CurrentCommand03 + ''''
IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying LiteSpeed backup.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType03 = 'sqlbackup'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand03,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLBackup backup.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType03 = 'xp_ss_verify'
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_verify @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
SELECT @CurrentCommand03 = @CurrentCommand03 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLsafe backup.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput03 = [dbo].[CommandExecute] @Command = @CurrentCommand03, @CommandType = @CurrentCommandType03, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput03 = @Error
IF @CurrentCommandOutput03 <> 0 SET @ReturnCode = @CurrentCommandOutput03
END
-- Delete old backup files
IF (@CurrentCommandOutput02 = 0 AND @Verify = 'N' AND @CurrentCleanupDate IS NOT NULL)
OR (@CurrentCommandOutput02 = 0 AND @Verify = 'Y' AND @CurrentCommandOutput03 = 0 AND @CurrentCleanupDate IS NOT NULL)
BEGIN
WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CleanupCompleted = 0)
BEGIN
SELECT TOP 1 @CurrentDirectoryID = ID,
@CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE CleanupCompleted = 0
ORDER BY ID ASC
IF @BackupSoftware IS NULL
BEGIN
SET @CurrentCommandType04 = 'xp_delete_file'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SET @CurrentCommandType04 = 'xp_slssqlmaint'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_slssqlmaint N''-MAINTDEL -DELFOLDER "' + REPLACE(@CurrentDirectoryPath,'''','''''') + '" -DELEXTENSION "' + @CurrentFileExtension + '" -DELUNIT "' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + '" -DELUNITTYPE "minutes" -DELUSEAGE'' IF @ReturnCode <> 0 RAISERROR(''Error deleting LiteSpeed backup files.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType04 = 'sqbutility'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqbutility 1032, N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''', N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + CASE WHEN @CurrentBackupType = 'FULL' THEN 'D' WHEN @CurrentBackupType = 'DIFF' THEN 'I' WHEN @CurrentBackupType = 'LOG' THEN 'L' END + ''', ''' + CAST(DATEDIFF(hh,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'h'', ' + ISNULL('''' + REPLACE(@EncryptionKey,'''','''''') + '''','NULL') + ' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLBackup backup files.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType04 = 'xp_delete_file'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType04 = 'xp_ss_delete'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_delete @filename = N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + '\*.' + @CurrentFileExtension + ''', @age = ''' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'Minutes'' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLsafe backup files.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput04 = [dbo].[CommandExecute] @Command = @CurrentCommand04, @CommandType = @CurrentCommandType04, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput04 = @Error
IF @CurrentCommandOutput04 <> 0 SET @ReturnCode = @CurrentCommandOutput04
UPDATE @CurrentDirectories
SET CleanupCompleted = 1,
CleanupOutput = @CurrentCommandOutput04
WHERE ID = @CurrentDirectoryID
SET @CurrentDirectoryID = NULL
SET @CurrentDirectoryPath = NULL
SET @CurrentCommand04 = NULL
SET @CurrentCommandOutput04 = NULL
SET @CurrentCommandType04 = NULL
END
END
END
-- Update that the database is completed
UPDATE @tmpDatabases
SET Completed = 1
WHERE Selected = 1
AND Completed = 0
AND ID = @CurrentDBID
-- Clear variables
SET @CurrentDBID = NULL
SET @CurrentDatabaseID = NULL
SET @CurrentDatabaseName = NULL
SET @CurrentBackupType = NULL
SET @CurrentFileExtension = NULL
SET @CurrentFileNumber = NULL
SET @CurrentDifferentialBaseLSN = NULL
SET @CurrentDifferentialBaseIsSnapshot = NULL
SET @CurrentLogLSN = NULL
SET @CurrentLatestBackup = NULL
SET @CurrentDatabaseNameFS = NULL
SET @CurrentDatabaseType = NULL
SET @CurrentDate = NULL
SET @CurrentCleanupDate = NULL
SET @CurrentIsDatabaseAccessible = NULL
SET @CurrentAvailabilityGroup = NULL
SET @CurrentAvailabilityGroupRole = NULL
SET @CurrentIsPreferredBackupReplica = NULL
SET @CurrentDatabaseMirroringRole = NULL
SET @CurrentLogShippingRole = NULL
SET @CurrentCommand02 = NULL
SET @CurrentCommand03 = NULL
SET @CurrentCommandOutput02 = NULL
SET @CurrentCommandOutput03 = NULL
SET @CurrentCommandType02 = NULL
SET @CurrentCommandType03 = NULL
DELETE FROM @CurrentDirectories
DELETE FROM @CurrentFiles
END
--// Log completing information //--
Logging:
SET @EndMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120)
SET @EndMessage = REPLACE(@EndMessage,'%','%%')
RAISERROR(@EndMessage,10,1) WITH NOWAIT
IF @ReturnCode <> 0
BEGIN
RETURN @ReturnCode
END
END
GO
ALTER AUTHORIZATION ON [dbo].[DatabaseBackup] TO SCHEMA OWNER
GO
Diane

Calling Managed CLR Stored Procedure from C++ SQL Server 2008 fails with Msg 2809

I am trying to call a stored procedure from C++ (VS 2010).
Here is what the stored procedure looks like:
public class Validate
[Microsoft.SqlServer.Server.SqlProcedure(Name = "ClientTest")]
public static void ClientTest(out String res )
{ res = "50";}
To create a stored procedure I deploy at first the assembly
USE [test]
GO
CREATE ASSEMBLY ClientTestAssembly
AUTHORIZATION testLogin
FROM 'C:\Users\test\Documents\Visual Studio 2010\Projects\TestCreationAssemblyCSharp\TestCreationAssemblyCSharp\bin\x64\Debug\TestCreationAssemblyCSharp.dll'
and call
USE test
GO
CREATE PROCEDURE ClientTest (@res NVARCHAR(40) OUTPUT)
AS
EXTERNAL NAME ClientTestAssembly.Validate.ClientTest
I can call my procedure direct in SQL Server Management Studio without any errors
declare @res nvarchar(10)
execute ClientTest @res OUTPUT
print @res
But when I try to call this procedure from C++ using CALL syntax
SQLBindParameter(sqlstatementhandle, 1, SQL_PARAM_OUTPUT, SQL_C_CHAR,
SQL_VARCHAR , 40, 0, version, sizeof(version) ,
&pcbValue);
res = SQLExecDirect(sqlstatementhandle, (SQLCHAR*)("{CALL ClientTest(?) }"), SQL_NTS);
I get the Error 2809 with SQLSTATE 42000 and with statement
The request for 'ClientTest'
(procedure) failed because 'ClientTest' is a procedure object.
However, if I wrap my CLR stored procedure into a T-SQL stored procedure, like
CREATE PROCEDURE myProc (@res NVARCHAR(40) OUTPUT)
AS
EXEC ClientTest @res OUTPUT
and call then myProc instead of ClientTest
res = SQLExecDirect(sqlstatementhandle, (SQLCHAR*)("{CALL myProc(?) }"), SQL_NTS);
everithing works fine and I get 50 as result.
I have no ideas what is the reason for that behavior.
Thanks very much for any suggestion.
Christina

I'm not an ODBC expert, but you might try following the sample here:
Process Return Codes and Output Parameters (ODBC)
To see if it also behaves differently for your CLR proc.
David
David http://blogs.msdn.com/b/dbrowne/

Idoc Failing With IDOC_INPUT_ALEAUD

hi
Trying to post an idoc from XI to R/3 system. The message has succesfully come into XI, but in R/3 system it is showing with error "Function module not allowed: IDOC_INPUT_ALEAUD"
Could someone help.
thx,
Pradip

hi Pradip,
If you send and receiving are both SAP system you can configure the IDoc ack. This quide will help you do the same
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Regards
Ramesh P

BPC 10.0 - UJBR - Restore fails with msg - Connection reset by peer - Why?

Dear All,
I am trying to RESTORE an environment into BPC server and got the attached error message. It is strange as I have done this many times in the past... successfully. Not sure why it is behaving like this suddenly.
The error message is : Connection reset by peer.
With the same BPC server, I am able to BACKUP an environment, successfully(!!!).
Have any of you come across this before?
Pls. help to resolve this.
Thanks,
Peri

One point to note ...
I am using a new laptop now. Earlier, I was using another laptop using which, I have done backup and restore many times, successfully.
Even in the new laptop, backup is successful.
I have disabled Firewall at the machine. Still, there is no break through.
This has happened once before using old laptop and after a while, it was ok.
Is this because, some back ground job is running now?
Thanks,
Peri

Email on Idoc Failure with Status 56 64 68 69 70

We have standard inbound idoc processing for Basic Type : DELVRY01 and Message Type : DESADV using the function module IDOC_INPUT_DESADV1.
We currently have a requirement to send an email, when any of these type of Idocs fail with status 56, 64, 68, 69 and 70.
Where would be best place to provide this solution to send an email to a particular user when the Idoc fails with the above status?

Hello Saleem,
One approach would be to consider workflow based on object type IDOCAPPL. The start condition for the workflow could be the triggering of the event errorProcessCompleted. You could filter further by status and your message type (DESADV ) to only start the workflow for the errors that you mentioned. The workflow could then send an email.
You will need to verify the details for your own scenario.
Good luck,
Greg Kern

IDOC Failed - Error massage Deficit of PU IR quantity

Hi
I am getting IDoc failed with erros massage "Deficit of PU IR quantity "
What could be the reason.pleaseadvice.
Thanks
Ajit K Barik

You need to provide more detail e.g. IDoc type, message number etc. Look at the data in the IDoc and try posting a document based on this. Usually you will get the same error and understand why you are getting it.

After CC updated all other updates fail w/ msg (49)

Just updated CC app and now I can't update anything else. The updates all fail with msg (49). Anyone having similar problems? I just chatted with someone at customer support and they were no help. Told me to dial up support on Monday as they are not open on weekends.

BTW, on intel based pc running Windows 8.1 with most recent updates installed.

IDOC is Getting Fail with - 56 Status EDI Partner profile not available

Hi,
I am trying to Post invoice Data into IDOC on ECC Side.
My Scenario is File u2013 XI u2013 ECC(IDOC).
But It is Getting Fail with 56 Status u201C EDI: Partner profile not available u201C
On Control record I am getting this
Port                      BLANKKKKKKKKKK
Partner Number              CLNTDEC110      Logical system for Client
Partn.Type       LS                    Logical system
Function                                  BLANKKKKKKKKKK
Port                            SAPDPI
Partner number             CLNTSAMPLE
Partn.Type                      LS         Logical system
Partner Role                   BLANKKKKKKKKKK
My configurations are Like this :----
On ECC Side MY SID is DEC
On ECC side I have two logical system in CLNTDPI100 for PI
                         CLNTDEC110 for ECC.
I have Partner profile on ECC system on CLNTDPI100 logical system    - we20
Added message type in inbound side of partner Profile (INVOIC-INVOIC02)
ON SAP PI/ XI System MY SID is DPI
IDX 1 has Port name SAPDEC
On Message mapping EDI_DC40 is mapping with constants with below given value
<INVOIC02>
   <IDOC BEGIN="">
      <EDI_DC40 SEGMENT="">
         <TABNAM> </TABNAM>
         <DIRECT>2</DIRECT>
         <IDOCTYP> </IDOCTYP>
         <MESTYP>INVOIC</MESTYP>
         <SNDPOR>SAPDPI</SNDPOR>
         <SNDPRT>LS</SNDPRT>
         <SNDPRN>CLNTDPI100</SNDPRN>
         <RCVPOR>SAPDEC</RCVPOR>
         <RCVPRT>LS</RCVPRT>
         <RCVPRN>CLNTDEC110</RCVPRN>
      </EDI_DC40>
Regards
PS

Check the following :
in We 02 which partner number is displayed just in the posted IDOC -> 2nd coloum in the IDOC list .and verify if the
same you have in Partner profile. Actually this details comes from ECC business system's logical system name which you give in SLD.
in we 19 - take the error iDOC numner and open the IDOC ->click on the first line -> check entries as you mentioned
above sender port should be PI port not empty.you need to check the partner profiles properly
follow these steps
1. create a RFC destination of tyoe H for Pi system- 2. create a Port and assigen the RFC destination to it
3 create logical system for PI BD54 PICLNT001 say , 4 with the same name create a partner profile in We20
    in parter profile maintain the inbbound message parameters and add the PI port as receiver port in it .Give the basic type also .
now
for sender details in ur case PI : u have port (defined in PI IDX1),patner number (LS defined in ECC PICLNT001), parter type LS.
for receiver you have port defined (as above), partner number the logical system for ECC system.
in we 19 ,, edit the control record as above and go to the tab inbound processing and test the internal posting
it should work fine. in the adapte specific attribuet for receiver ECC system , maitain the same LS name , if any wrong entry is
there then change the LS in sld to poing to correct LS/
refer this
http://www.riyaz.net/blog/xipi-settings-in-r3-partner-system-to-receive-idocs/technology/sap/26/
Regards,
Srinivas

Mails whenevr an inbound idoc fails

Hi Experts,
Is there any way I can trigger mails whenevr an inbound idoc fails to update in r3.With reference to workflow etc
Regards,
Arnab

Hello Arnab
On SAP release >= 6.20 you have the standard report RSEIDOCA available which can be scheduled in background.
Unfortunately SAP did not provide an e-mail notification mechanism for this report but only workflow. For our company I created a ZRSEIDOCA report having this e-mail function. For more details please refer to
ALE Error Message Handling
e-mailing: How to sent out an email to the Managers OUTLOOK express account
Regards
Uwe

Triggering a mail when ever a perticular inbound IDOC fails

Hi Experts,
Is there any way I can trigger mails whenevr an inbound idoc fails to update in r3.With reference to workflow etc
Regards,
Arnab

hi,
i think u need to check tcode swu3 for automatic workflow customizing and check in we40 (error AND STATUS PROCESSING) whether the processing code is assigned to the workflow task.
if it is assigned,the workflow will be automatically triggered and the mail will be sent to the user by itself.
ALE error handling uses workflow. A standard task is provided for each message type. Task TS20000051 is used for all BAPIs.
Workflow functions as follows:
A task (work item) is generated for the error handling and stored as a message in the inboxes of the employees responsible.
If one of these employees processes the work item, the standard task method for error handling is started. The user can, for example, restart IDoc processing.
If the IDoc is processed successfully, the work item is deleted from the inboxes of all the employees involved.
For this procedure to function, the employees responsible for a particular message type and partner (sender or receiver) must be defined as follows:
1. A hierarchy of organizational units (for example, "sales office") and positions (for example, "customer officer for customer X") is created and employees are assigned to it.
2. The standard tasks for error handling (for example, an error related to an inbound sales order) are assigned to the relevant organizational units or positions (for example, "sales office").
3. The organizational unit, position or employee responsible for dealing with the error are specified for each partner and message type in the partner profiles.
If an error occurs, the system determines:
1. The employees responsible using the staffing schedule of the organizational unit or position linked to the standard task.
2. The employees defined in the partner profiles (using position, user ID, or organizational unit).
3. The employees appearing in both groups represent those who will receive a work item in their inboxes.
regards,
pankaj singh

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

Inbound BOMMAT idocs failing with MSG BOM 023

Similar Messages

Maybe you are looking for