Inbound Exchange Updates Issue

My wife uses iCal (Snow Leopard) and MobileMe to her iPhone (iOS4) to manage her business calendar. She often gets meeting invites froma client that is using Outlook/Exchange. The initial meeting comes into her iCal (albeit to a strange calendar) but then, if the sender updates the meeting, the update doesn't get reflected in the original invitation.
I have looked at all the settings and can't find anything amiss. Is this just an incompatability between Exchange and iCal or am I missing something?
Thanks.
David

A little more clarification on this issue. When the original calendar event comes into iCal, it goes to a calendar called Mail To Dos under the On Mac Mac section of the sidebar. All of the other calendars are listed under:
[email protected]
I can't transfer the incoming calendar event to any of the other calendars and I know that when I accept the appointment the sender gets a confirmation but on my end it doesn't look like I have accepted it.
The email he sends the invitationms to is a gmail address. She doesn't want to have any more email addresses but would a me.com address solve this problem?
Any thoughts?

Similar Messages

Exchange Update Issue

Trying to use Exchange to install an extension. Exchange panel shows that an update is required. I had installed the latest version from the Exchange page and it seemed to install fine. If I click on the update button from a panel within say InDesign, I get taken to Adobe Application Manager (have a creative suite 6 education subscription). However, Exchange does not appear in the Applicaiton Manager window so it never sees the update. Any suggestions?

Did you use your Adobe ID to sign in? Did this issue get resolved? If not please let me know.
Thanks,
Jonathan Ferman | Product Manager

The recent software update on my HTC One has caused errors with Exchange ActiveSync issues. Calendar, mail and tasks sync fine but contacts won't sync. How do you correct this?

The recent software update on my HTC One has caused errors with Exchange ActiveSync issues. Calendar, mail and tasks sync fine but contacts won't sync. How do you correct this?

I had the same problem. Here is what worked for me. Open the mail app and delete your exchange account (Settings > Delete Account). Then re-add your Exchange account. After this my Exchange contacts showed up again.

Exchange 2010 - Issues after rollup update installation.

Exchange 2010 - Issues after rollup update installation.
We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
An unexpected error occurred and your request couldn't be handled. and
Your network connection is unavailable. Please reconnect and try again.
Issue2 - When I open the Exchange Management Shell I get the following error:
Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
hope that it will be fixed after resolving issues 1 and 2.
We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
Please help.
Thanks.
Greg

Hi,
Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
"An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2013 issues - (new send email Stuck in Drafts not send)

Exchange 2013 issues - (new send email Stuck in Drafts folder not send)

I am also having this issue.
server 2012 VM with exchange 2013. plenty of resources, more than recommended so cannot be a BAck Pressure issue especially as no clients are connected yet.
In the early stages of setup and testing, mail sent to other mailboxes worked fine in outlook 2007 and OWA but after a few issue that developed and are now resolved, any e-mail send within outlook or OWA just goes straight into the drafts folder.
I tried, DNS setting changes under roles, on the server, on DNS server, MX DNS records, increased resources, looked at received connectors, changed and even deleted send connectors as this is not required for internal mail. Tried changing authentication
types but then outlook won't connect to, staying with Basic Auth.
Have not been able to test inbound e-mail as this is going to replace a production server and is not ready, although I could probably simulate a route from another server and push e-mail to it. Will try tomorrow.
I have spent about 20 hours trying to figure this out and made probably 40 changes. Change, test, rollback etc. Been searching through loads of forums and technet sites all with no help.
All services are started, server has been rebooted several times.
It is also an AD server and has both Exchange roles installed. There is no reason why it should not work. This is so frustrating, we don't have these issues with the now end of life Scalix, or MDaemon or Zimbra. Pity the client wanted a Microsoft solution.
To be honest there are not a lot of things that cannot be changed in ECP although there is more under exchange powershell however I am not familiar with all the commands yet. I have resorted to watching training videos even though I am a seasoned IT Pro, although
not so much with exchange it seems.
I have seen many people have this issue on Exchange 2007, 2010 and 2013. Someone must know how to resolve this or find a work around?
So far I have an expensive solution the client has purchased that I cannot get running properly.
Aside from this issue, I really like the new Server 2012 and new Hyper-V.
I was about to install Exchange Server 2013 on a physical machine due to this f#ckin' issue. But a post for the DNS change has saved my life:
http://social.technet.microsoft.com/Forums/en-US/exchangeserverpreview/thread/04c0147b-f4e3-4041-a566-310854e71068/ (rafael9908's answer)
And thanks Jesper Bernle for excellent info provided by your link.

Inbound email update data in R/3 46C?

I know that Interactive Forms has the possibility of having an inbound email update data in R/3?
I also know that Interactive Forms is not possible with version 46C.
Can I get an inbound e-mail to update data in R/3 if I am on version 46C???
-Ken

Dear Relaxed Surfer,
The link you give is great to handle basis setup.
Is there a place to handle application setup? Suppose I want an inbound e-mail to execute a transaction, call a BAPI or simply do a direct update to a Zee table. Is there documentation on this?
-Ken

Why can't we get a straight answer from Apple about updater issues?

Why are there thousands and thousands of posts from people all having the same issue? We try to update IPod software using latest updater, and it causes IPod to no longer be recognized. All we want is someone from Apple to FIX THE PROBLEM! Yet all we get are refferals to complicated articles that never seem to work for at least half the people. Clearly it is a problem with these updaters. WHY IS APPLE NOT FIXING THIS ISSUE? Can anyone give me a straight answer!?

Hi Wolf,
Welcome to Apple Discussions
"thousands and thousands of posts"
There are roughly 10,300 thread with 50,000 posts in the iPod Nano forum, and there are probably another 500,000 who don't even know it exists. I don't there there has been a thousand posts on the updater issue. It may seem like thousands upon thousands, but don't forget; you're at an Apple Support Forum.
"All we want is someone from Apple to FIX THE PROBLEM!thousands and thousands of posts"
There's no need to "shout". I don't think Apple is going to hear you from shouting in a user to user forum. Nor will you probably get a answer (here) from Apple for the same reason. I have a -------- (straight) answer for you. I don't know what's going on specifically (no one really knows in this forum because they are all users. Anyone who would know won't say), but I can assure you that Apple isn't ignoring the issue. They are the quickest to respond to any problem that comes their way. If you would like to get Apple's attention, I don't suggest ranting and raving in the iPod user to user forum. I suggest submitting polite feedback to Apple here.
Jon

Is there a consensus on how to solve security update issues?

hi,
i'm writing to you from a PPC G4 (AGP graphics) that will self-destruct by the time i switch off and (attempt) to re-start tomorrow. i will then need to do a re-install, just to see if i have gotten any replies (grinds teeth to the root). it will probably be my 8 th re-install in the past month. i just can'st takes no mores, Cap'n
<exasperation>deep breath... each time i have done a clean install, zero-ed all data when erasing (7 times over, on this occasion), repaired permissions before and after each software update, and followed every advice i could find via google to pre-empt another "Error: underlying task reported failure on exit" and the inevitable hanging grey screen; i have earned nothing but another Disk Utility report of the same problem. my HD seems to be OK - Disk Utility and Disk Warrior both say it's "verified" by SMART (although i've read this could be no assurance...). it's 40 GB, nothing else installed but NetBarrier; nothing saved on it (just 3GB of OS).
i've searched this forum over the last weekend and come across a diverse range of methods in resolving software update issues. i have tried downloading the security update and safari 3.2 directly from the site and bypassing Software Update- to no avail (but noticed that they are quite larger in MB than via Software Update??).
the one suggestion the intrigued me was installing the update via Terminal. why would this be any different? the worst thing about this is that there is no universal way that'll work for all, just individual solutions for different macs??? could my problem be exacerbated by using the double layer (double the permissions to fix?) of a Panther OS with Tiger Upgrade disk?
when i last tried to resolve the "error" with safe mode, fsck and DU Repair Disk/Permissions, which initially failed, i resorted to Disk Warrior, which re-built the directory, and "fixed" the HD. when i re-tried fsck it said the HD was "ok", but i still had the "error: underlying task..." on DU?
is there an issue with the Security Update oo8 because it's PRIMARILY for 10.5 and not Tiger? why have some encountered this problem and others escaped any seeming conflicts ? is this problem also caused by JAVA updates (there are, after all, 4 updates!)
more importantly, WHAT CAN I DOOOOOOOO?
thank you

looking at your suggestion to check /Library/Startup items in the concurrent thread ("Help needed after installing Security Update 2008-008"), i recalled that the only thing i have in this file system is 3 folders concerning Intego, NetBarrier and Virus Barrier. one of these contains the NetBarrier x4 daemon which has no image, just the apple "pencil, ruler, pen on paper" "A" image. i don't think it correctly downloaded, but this the case in every instance.
i'm running netbarrier x4 10.4.5 updated and downloaded on installation. intego Support says that there should be nothing in my "Startup/Login items". i thought they meant Login items (users>login items) because when i take the folders out of my "/Library/Startup items", NetBarrier fails to "initialize".
intego is now on newtbarrier x5, but they say x4 is fully compatible with Tiger???
my baby maybe getting on, but it's strong enough, i just need to know what's bugging it!

10.9.2 Update Issue (VPN) - Eclipse Perl debugger issues while connected to VPN

This post was initially added to this discussion: 10.9.2 Mavericks update issues
I have yet another issue related to 10.9.2 update - Eclipse Perl debugger issues while connected to VPN...
One of the big changes introduced by 10.9.2 update - are VPN changes (security fixes). Unfortunately, whatever these changes are - they "broke" Eclipse (OpenSource IDE) debugger. I am not sure if *all* programming languages (Eclipse plugins) are affected by this, but I know for sure that 'Epic' (Perl plugin) debugger *stopped working* while system is connected through VPN.
Here is the error that gets “popped-up” in the Eclipse:
Timed out while waiting for Perl debugger connection
… and here is exact exception stack that gets printed:
Unable to connect to remote host: 130.10.210.74:5000
Compilation failed in require.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
main::BEGIN() called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
eval {...} called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
BEGIN failed--compilation aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
Can't use an undefined value as a symbol reference at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 7596.
END failed--call queue aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
(of course IP address changes dynamically for each VPN connection session)…
I was able to prove that this issue is related to 10.9.2 update:
Issue *does not* exist under 10.9.1 (I had to revert back to 10.9.1 to get it working again)
No updates were performed around the same time 10.9.2 update occurred (I verified that using Software Update log)
No configuration changes were introduced around the same time
Reverting back to 10.9.1 using Time Machine (thanks god I had backup !!!) fixed the issue
Steps to reproduce this issue:
In Eclipse, try to use 'Epic' (Perl plugin) to debug any perl script while *not* connected through VPNEpic debugger works
Connect to VPN
Start Epic debugger to debug same script
Debugger *does not* start, and "Timed out while waiting for Perl debugger connection" error pop-up comes up after some time. At the same time, exception stack (listed above) is printed in Eclipse's console
I am programmer/software developer, I work remotely (telecommute) and thus have to rely on use of VPN to connect to company's intranet. Perl - is primary language used by my team, and we use Eclipse IDE with Epic plugin - heavily. Use of Epic's debugger - is a *very large* aspect of my work, I cannot work without it. So in essense, 10.9.2 has *entirely* disrupted my ability to work! It took me almost a week to get back to normal work environment, and I cannot afford to let it happen again... I need Apple's development team resolve this VPN related issue, as soon as possible! Because of this issue, I am *stuck* with 10.9.1 and can not upgrade my laptop to any other versions. In fact, I had to disable system updates - just so I do not run into this issue again... I contacted Apple's Tech Support on 02/28 with this issue (Ref: 582428110), asking to raise trouble ticket. Since then, I tried to follow-up on that issue, but do not get any information. Please advise on the status:
is there a trouble ticket to track this issue?
is there any progress?
what's the ETA for an update that fixes this problem?
- Val
Message was edited by: vpogrebi

Am I the only one experiencing this issue ???

My new iPod Classic will not sync with my new Mac Book. My iPhone 5 does, so does 2nd gen. iPod touch. Apple Store cannot figure it out. Tried different Classics on different Macs, same thing. iTunes update issue ?

The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
Any help would be apprecated.

By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

Unable to Resolve Windows Update Issue in Windows 8.1

Hello,
I recently, as far back as 1 month ago, began experiencing issues with the update service under the Windows 8.1 OS platform.
I found that I was having to repeatedly run the Windows Update Troubleshooting Tool. This appeared to fix the issue with each run of the tool, but eventually I'd have the same problem receiving updates again. My problem is as follows:
1. Windows Update service hangs during register analysis.
2. Unable to reset (stop or restart) wuauserv.
3. Unable to reset (stop or restart) Cryptserv.
4. Unable to reset (stop or restart) BITS.
5. Unit recently, was unable to connect to internet from Desktop GUI, but was able to connect using Metro GUI.
I'm not sure is there was a recent update that caused this issue, but I can no longer download updates for my system, nor can I successfully run the Windows Update Fixit tool.

Hi,
Let's confirm these situations:
Now your desktop Internet Explorer can't connect Internet.
You receiving the same updates again and again.
If I am right, please check that update's installation status from update history.
Then refer to this article to troubleshoot:
http://social.technet.microsoft.com/Forums/en-US/c842b997-42a4-41fb-9992-b58d65d068d9/forum-faq-common-steps-to-start-troubleshooting-windows-update-issues?forum=w8itprogeneral
Karen Hu
TechNet Community Support

Checklist for Exchange Certificate issues

Checklist for Exchange Certificate issues
1.
Why certificate is important for Exchange and What are Certificates used for
Exchange is now using certificates for more than just web, POP3, or IMAP. In addition to
securing web services, it has also incorporated Transport Layer Security (TLS) for session based authentication and encryption.
Certificates are used for several things on Exchange Server. Most customers also use certificates
on more than one Exchange server. In general, the fewer certificates you have, the easier certificate management becomes.
IIS (OWA, ECP, EWS, EAS, OA, Autodiscover, OAB, UM)
POP/IMAP
SMTP
2.
Common symptoms for
certificate issue
Here we can see three different types of the certificate warning, mainly from the Outlook
side.
a.
Certificate mismatch issue
b.
Certificate trust issue
c.
Certificate expiration issue
3.
Checklists
In this section, checklists will be provided according to the three different scenarios:
Certificate Mismatch Issue
[Analysis]:
This issue mainly occurs because the URL of the web services Outlook tries
to connect does not match the host name in the certificate.
[Checklist]:
Firstly make sure how many host name in your certificate the certificate. Run “Get-ExchangeCertificate | select certificatedomain”.
Secondly, check the web services URLs which Outlook are trying to connect to. Run “Test Email AutoConfiguration”
In this scenario, you need to check the host name for the following services:
Autodiscover
EWS
OAB
ECP
UM
If any of the urls above does not match the one in the certificate, refer to the following article to change
it via EMS:
http://support.microsoft.com/kb/940726
1.
Do not forget to restart the IIS service after applying the changes above.
2. Make sure a valid certificate is enabled on the IIS service.
Certificate Trust Issue
[Analysis]:
For the self-signed and PKI-based (Enterprise)
certificates, they are not automatically trusted by the client computer or mobile device, you must make sure that you import the certificate into the trusted root certificate store on client computers and devices. On the other hand, Third-party or commercial
certificates do not have this problem. Most commercial CA certificates are already trusted because the certificate already resides in the trusted root certificate store. Because the issuer is trusted, the certificate is also trusted. Using third-party certificates
greatly simplifies deployment.
[Checklist]:
If it’s an Enterprise CA certificate, manually install the root certificate to the “Trusted Root Certification Authorities” folder:
If it is a 3<sup>rd</sup>-party certificate, first remove and reinstall the certificate. Check whether the Windows Certificate Store on the local
client is corrupted. If it still does not work, please contact the third-party CA support to verify the certificate.
Certificate Expiration Issue
[Checklist]:
When a certificate is about to expired, we just need to renew it by referring the following article:
Renew an Exchange Certificate
http://technet.microsoft.com/en-us/library/ee332322(v=exchg.141).aspx
To avoid any conflictions, it’s recommended to remove the expired certificate from the certificate store.
[How to set a reminder to alert the administrator when a certificate is about to expired]:
It’s easy to fix the certificate expire issue. But it should be more important to set a reminder before the
certificate expiration. Or there can be a large user impacts.
Generally, the Event ID “^(24|25)$” will appear in Application log when a certificate is about to expire.
If it’s not quite visible, we can refer to the following solution:
http://blogs.technet.com/b/nexthop/archive/2011/11/18/certificate-expiration-alerting.aspx
OWA certificate revoked issue
[Analysis]:
IE
includes support for server certificate revocation which verifies that an issuing
CA has not revoked a server certificate. This feature checks for CryptoAPI revocation when certificate extensions
are present. If the URL for the revocation information is unresponsive, IE cancels the connection.
[Solution or workaround]:
1. Contact CA provider and check whether the questioned certificate is in the Revoked List.
2. If not, check whether the certificate has a private key.
3. Remove the old certificate and import the new one.
Workaround:
IE Internet Options -> Advanced tab -> Clear the "Check for server certificate revocation"
checkbox.
4.
More References
Digital Certificates and SSL
http://technet.microsoft.com/en-us/library/dd351044(v=exchg.150).aspx
More on Exchange 2007 and certificates - with real world scenario
http://blogs.technet.com/b/exchange/archive/2007/07/02/3403301.aspx

(Reported previous post with link to SIS package to moderator)
This is not the correct SIS package for the N73. The package shown is for S60 3.2 devices, but the N73 is not S60 3.2, I believe it is S60 3.0.
Most features may work with this SIS, but if you experience strange problems, try using the S60 3.0 version.
But there are no significant difference between 2.5.3 and 2.5.5 with regard to attachments. The only changes were with localization (languages).
At this point, try 2.7.0 which is out now:
http://businesssoftware.nokia.com/mail_for_exchange_downloads.php
Make sure to pick the right phone on the drop down list. It does matter! There are 4 different packages. This list makes sure you get the right one.
I have seen some issues with attachments not completing that seem to be carrier dependent. You can test this my using Wifi (if possible).
Message Edited by m4e_team_k on 28-Sep-2008 12:25 AM

Sender JDBC Adapter Select/Update Issue

Dear All,
We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
In the communication channel ->
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
Your inputs will be appreciated.
Regards
Amit

Amit
Did you ever get a solution to your question ?
Sender JDBC Adapter Select/Update Issue
Posted: Apr 24, 2008 2:29 PM Reply
Dear All,
We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
In the communication channel ->
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
Your inputs will be appreciated.
Regards
Amit

Had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?

had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?

You might want to check this thread https://discussions.apple.com/thread/3374367 hope this helps

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?

So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)?

Inbound Exchange Updates Issue

Similar Messages

Maybe you are looking for