Including all Systems in Solution Monitoring

Hi,
We have created a solution in DSWP and this is for the ERP landscape, which has four systems DEV, TEST, QAS and PRD. on the solution monitoring tab under system monitoring/administration it only displays the PRD system and the PRD servers.
From the maintenance Optimizer it also only display the PRD system how can this be solved so as to show all the systems in the landscape?

Hello Trevor,
I'm thinking about the same, but in my opinion you can only monitor PRD systems in Solution Manager.
To monitor DEV, TEST, QAS you can mark this system as PRD in SMSY and add this to your solution as next PRD systems.
I'm think this is not a good idea.
I'm Write about SOLMAN 3.2
Edited by: Michal Walczak on Apr 3, 2009 10:12 AM

Similar Messages

Solution Directory -- Create System for Solution Monitoring

Hi Experts,
I created an ERP solution in SolMan but I don´t know how to create systems DEV, QAS and PRD as graphics for process monitoring.
I allready configured in SMSY the systems, RFCs and logical component.
Regards.

Hi,
I would suggest to go through http://service.sap.com/rkt-solman for your Solution Manager release.
It provide complete details regarding benefits and configuring solution manager services including Solutin Monitoring as well.
Hope it helps.
Regards,
Srikishan

Creation of Ibase for satellite systems in Solution Manager 4.0 SP13

Hello!
Can enybody help?
We are trying to creat Ibase for Satellite systems in solution landscape in SolMan system, using the automatic generation(TA SOLUTION_MANAGER) for specific solution.
After successfully generation we have only one iBase for one solman system only, but there are some systems in solution.
Does anyone know how to generate iBase for all systems in solution?

Hi,
There will be only one iBase for a solution.
Goto tcode IB52 and check. You will find all the systems assigned to your solution appear there.
regards,
Ram

System Overview empty in solution monitoring screen

Hi,
I am in the process of setting up monitoring for R/3 system from Solution Manager. Defined all required entries in SMSY. In the section Solution Monitoring -> System Monitor/Administration, the system overview is showing empty.... I mean SID names are not showing. Any idea what could be wrong ?
Thanks

Hi Aravind,
The only cause to this problem is your igs is not working and could be one more reason i.e you have not activated the services ( html, http,bsp and others ) in transaction SICF
you try this way and to activate the services follow the instruction from SPRO
Regards
S.M.Ahmed
Intelligroup Inc

Solution Monitoring System Overview

There are non-production systems showing in the system overview in Solution Monitoring. They are dev and QA systems that are in the logical component. How do I removc them?

Hello Jerry,
Solution Monitoring overview just displays the the solutions and the number of systems rated green, yellow, red, etc for
Earlywatch Reports, System Monitoring, Business Process Monitoring, and Open Tasks.
As you can see Solution Monitoring is based on Solution, so whatever systems you have included in that solution will be included in the solution. The overview is an overview of the solutions in Solutin Monitoring. This is why it is called Solution Monitoring.
If you are talking about System Monitoring, or BPM or EWA, etc, then if you don't want non-production systems included, then they should not be included in the solution, or the status of those systems in the solution should not be "Put in Solution".
Perhaps you have not set up your solutions in the best way?
Regards,
Paul

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

Monitoring a non-SAP satellite system in Solution Manager

Hi Folks,
I have two quick questions.
1.) What is the proper procedure/tool for monitoring a non-NW system in Solution Manager? Should I be able to use sapccmsr and saposcol on these systems?
2.) What is the proper way to connect a non-NW system to the SLD? Should I be able to use saposol and sldreg for these?
Background:
- My Solution Manager system is a NW70 EHP1
- Solution Manager Diagnostics is installed and monitoring my ABAP and Java systems
- I have my CCMS agents registered back to my CEN for the ABAP and Java systems
Satellite systems:
- Multiple Wintel servers (both IA32 and x64) that are running;
o standalone SQL server databases
o BOE/BOBJ
o BPC for Microsoft
Section 4.8 of the Monitoring Setup Guide (CEN SAP Netweaver 7.0 SPS18) states that I should be able to monitor a standalone database.
My confusion isu2026 in the absence of an SAP filesystem (kernel) and the standard SAP environment variables that get set during an install, how do I register the agents? The executables do not want to launch.
Thank you,
Bill

Dear William,
Monitoring of NON-SAP systems is not actually done on the solution manager system itself. The solution manager system gets its feed of alert information from the satellite, specifically CCMS. For SAP systems, alerts from CCMS are set up and activated by default. For Third-Party systems you have to be ablke to set up the interface to feed monitoring information from your non-SAP software to SAP's CCMS infrastructure.
You can get more information on CCMS agents via the website at http://service.sap.com/monitoring.
Go to "system Monitoring and Alert Management" > "Monitoring in Detail".
I hope this information is helpful.
Regards,
Paul

Central system administration (CSA) in solution monitoring

Hello,
I want to configure my solution manager for central system administration (CSA) which is a service provided under solution monitoring of transaction dswp.
I couldnt find any documents for this configuration.
Could you please help me out..
Regards,
Gurudath Pai

Hi Gurudath,
If you have an s-user id, step-by-step tutor files with screenshots are available at
https://service.sap.com/rkt-solman > Solution Manager > Solution Manager 7 > Technology Consultant & System Administrator > System Monitoring, Administration
Before configuring CSA, you have to:
1. Perform basic settings for Solman (use wizard based approach)
2. Setup the system landscape
3. Create solution
4. Now you can configure CSA
Revert if you need clarifications
Prasad

Monitor Systems From Solution Manager 4.0

Hi Dear Gurus,
I have recently Instaled SOLMAN 4.0 on windows with Mysql. I have configured the Maintainence optimizer and now its working fiine.
From my organization requirement they want to monitor ERP and BW systems from solution manager.
Can any one please tell me how to start regarding this.
And one more question is i am just wondering Central User Admin is different installation or we have to configure SOLMAN 4.0 to use CUA.
Many thanks for your time.
Kind Regards,
Vamsi.

Hi,
You first need to Setup landscape and create RFCs
[Data Collection|https://websmp109.sap-ag.de/~sapidb/011000358700004860052004E.sim]
[Create Systems|https://websmp109.sap-ag.de/~sapidb/011000358700000894082006E.sim]
[Create RFCs|https://websmp109.sap-ag.de/~sapidb/011000358700002912202006E.sim]
[Assign Logical Components|https://websmp109.sap-ag.de/~sapidb/011000358700002912242006E.sim]
Then Create Solution,
Then Setup Solution Monitoring
[Setup|https://websmp109.sap-ag.de/~sapidb/011000358700006936062005E.sim]
[Monitoring Graphic|https://websmp109.sap-ag.de/~sapidb/011000358700006939872005E.sim]
[Exhaustive very good tutor|https://websmp109.sap-ag.de/~sapidb/011000358700005479192006E.sim]
This will solve your problem.
Feel free to revert back.
--Ragu
Edited by: Raguraman C on Jan 16, 2008 4:31 AM

Setup solution monitoring

Hi all
I am hvaing a starnge issue while doing the sytem monitoring set up. I have included the system in smsy and assigned the logical component as well.These logical components are assigned to the solution which i have created in DSWP. But now i am not able to find the setup system monitoring option in operation set up. I dont have an any idea about this.
Thereby i deleted hte system and again recreated logical componenet then assigned to the solution well. But this also not worked out for me.
I have completed all the basic settings configuration in SPro and genreated the RFC destionation with required roles also(s_rfcacl). everything working fine. but i am unable to find the root cause and solution.
Anyone have any idea please do suggest me.
Regards
Vijay

Exactly!
In transaction SMSY switch to your solutions. Open the solution in which the new system is located.
Now Right-Click on the required system and choose "put in solution"
The system should now have a green background and be available.
Edit: I also work with a Solman 7.0 SPS 15. You should be able to add the system to the solution. Important is, that you try right-clicking on the system in the opend solution view in smsy
Regards
Benjamin
Edited by: Benjamin Ziegler on Sep 26, 2008 12:13 PM

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

Add sap R/3 enterprise system in solution manager SLD

Dear All
Required solution manager configuration documents.
We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
And during the installation of solution manager I select u201CConfigure a Local SLD u201C
Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
Who to Configure SLD Bridge ( in SLD Server ) ?
in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
and how to Verify that my system is connected and working fine With SLD
Please help me regarding u201C configuration solution manager u201C
Regards
Shahid

Hi
Visit for step by step details of Standard Configuration of Basic Settings
http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
http://www.wilsonmar.com/sap_solution_manager.htm
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
Regards
Uday

Solution Manager 4.0 Solution Monitoring User -Roles-Profiles for Satellite

Hi All,
I have installed Solution Manager 4.0 (OS -Linux ,Database - DB2) .
Now i need to connect solution manager to the R/3 4.6C
Satellite Systems (DEV, QAS ,PRD) for Solution Monitoring
and Service level Reporting .
I have read the configuration guide , but unable to get clear idea .
1) what users (alos type of user -Dialog , Service, Communication etc) do i need create in DEV , and Test in QAS for solution Monitoring .
2) what exact roles /profiles need to be assigned to these users in satellite systems .
3) what users/roles /profiles needs to be done in SOLMAN system
i have applied all the required plug ins and support packs
in satellite systems and solman 40 ..
Please advice . Your response will be a great help for me .
Satish

Hello Satish,
Just clarify, if u have meant connecting the satellite systems for EWA reports to be precise. Early watch Reports. If its is the case, then repond so that i can putin my inputs which may be helpful for you in this config.
Rgds,
Sri

How to add EP(DEV and QAS and PRD systems in solution manager)

Dear Gurus,
I want to include EP dev and qality and prodution systems in solution manager .
While installation of EP(only ASJAVA it is not having ASABAP) i selected solution manager as a Central SLD. But i deleted the systems in solution manger and recreated it again. I created all the systems and datatabae and logical components but in maintenane optimizer it is showing only production system but it is not showing development and quality systems in maintenance optimizer.
How to see developmnet and quality systems in maintenace optimizer.
Same thing for ECC also.
ECC dev and quality systems installed in the same server.
In maintenace optimizer it is showing only dev sysetm it not showing quality sysetm.
Can any body help this probelm.
Thanks & Regards
Rao.

I think you need to adjust your filter settings in the initial screen of MOPZ.
It's in the right top corner.

Solution Monitoring in JAVA Based Components ?

Hello Experts,
I have configured the Solution Monitoring in Solution Manager server with Satelite systems (ECC and CRM systems.) in Abap based Components
1.Earlywatch Alert
2,System Monitroing
3,Central System Administration
4,Service Level report All of them working fine
Now I want to setup all the above setup for Java based Components.
1.Is it possible to setup Solution Monirtoring in Java?.
2. How to configure the above setup?.
3. Is there any simulator or Help files availale?.
Thanks
Thirumal

HI Mayank,
I have followed the below steps.
basic steps for JAVA EWA:
configure solution manager diagnostics tool in solman
install wily interscope manager in solman
install SMD agents in satellite system
install wily agents in satellite system.
make sure about the sp level in satellite system.
The wily files depends on the SP - level
1.Could you tell me how to generate the EWA report for JAVA.
2. Could you give me document/simulator to configure the workcenter
Thanks
Thirumal

Including all Systems in Solution Monitoring

Similar Messages

Maybe you are looking for