Inconsistencies BALHDR / BALDAT (?)

Hello experts,
before opening an OSS-note I wanted to ask here, maybe someone has similar experiences. I found a lot of similar discussions, but most of it were about data volume, not about quantity of ABAP-table-entries.
We use Report SBAL_DELETE to reduce entries in tables BALHDR and BALDAT daily. If my understanding is correct the link between both tables is done by field LOG_HANDLE. When using the report we can see that the number of entries in the tables are decreasing. I checked this, selected logs were deleted in both tables BALHDR and BALDAT.
But it seems there is a big gap between both tables, in our System we have 13608 entries in BALHDR and 105.642.247 entries in BALDAT. So I made some Analysis on the base of linking LOG_HANDLE-field. I found out that a lot of LOG_HANDLE's in BALDAT are NOT in BALHDR. For my understanding this shouldn't be... am I right? I just found 1 hint in scn wiki:
     LOG_HANDLE record in BALDAT and BALHDR tables. - ABAP Development - SCN Wiki
Or can there be processes (especially in SCM-System) where BALDAT entries exist without linked BALHDR data?
If this is really a problem...
1. Is my suggestion correct that report SBAL_DELETE can't handle BALDAT if BALHDR is missing for the same log?
2. Did someone have a similar Situation? Or does someone have an idea how this can happen (we don't use any Z-reports related to log-creation / deletion)?
3. Does someone have an idea to solve it (except of opening OSS note )? Is there maybe a report to clear such entries?
Many thanks in advance!
Best regards
Harald

Hello Thanga,
thx again for spending your time.
I checked note 1436329 already before, didn't help me.
Same for archiving, it doesn't archive such "inconsistent" BALDAT-entries.
I was afraid of getting the answer to program a deletion program for 2 reasons:
1. We talk about over 100.000.000 entries in BALDAT in a productive system, so there can't be manual check of deleted entries. I would have to trust that deletion is correct. And in productive area it sounds a little bit... dangerous.
2. It is a standard table from SAP, and (for my opinion) we didn't affect it with self-developed coding. So it would be interesting why there is such waste in the table.
I will open OSS to SAP and will give you feedback. Please understand that I want to have this discussion "open" until feedback from SAP. If SAP has similar solution (just to delete) I will mark your answer as correct. If SAP provides another solution I will write it down in the discussion to have a solution for others (if someone has similar problem). Hope this is ok for you.
Regards
harald

Similar Messages

  • What are the tables used for ACR & Master data daemon job?

    Hi Experts,
    What are the tables used in the backend for ACR & Master data daemon jobs. I would like to see the details of CHANGERUNMONI or ACR/Hierarchy Change run.
    Kr,
    Praveen

    Hi Praveen,
    Have you tried these tables BALHDR, BALDAT and BALOBJT for checking master date daemon delta status. It may not give you complete details. but definitely helps.. If you find any more details please do let me know..
    Thanks,
    Bharath

  • OBIEE 11g:  Inconsistencies with Master-Detail events and Navigate to BI

    Hi everyone,
    I'm getting some pretty annoying inconsistencies with the Navigate to BI Content action as well as the Master-Detail events. Basically the main issue I get is that 90% of the time, the click does nothing.
    It's a pretty simple setup, I am setting up bulb gauges to act like a fancy column selector. The bulb gauges are setup to pivot based on a Metric Type column. The goal is that if you click on "Metric 1" bulb a trend report should refresh to show Metric 1. If you click on the "Metric 2" bulb, the same trend report will show that metric.
    Here's how I implemented it:
    Dashboard Tab A -- Uses Navigate to BI Content
    1) I have a prompt on Fiscal month in dashboard tab A.
    2) I created the bulb gauge and put it in dashboard tab A
    3) Setup the interaction on the bulb measure to navigate back to Dashboard Tab A.
    3) Prompted the trend on Metric Type column and put it in dashboard tab A.
    4) In theory, clicking on the bulb, should navigate back to the same tab and update the trend report appropriately
    5) In reality, nothing happens.
    6) The only way I can get the navigate to work is if I first change the value in the fiscal month prompt and click Go. Then I click on the bulb and the navigation will work ONCE. After that it's broken again.
    Dashboard Tab B -- Use Master Detail -Events
    1) Pretty much same situation as dashboard A, but instead of navigate to BI Content, I use the master-detail events.
    2) Pretty much the same results. I cannot get it to consistently work, in fact the trick with the filter didn't do anything.
    3) One thing I tried was cleared my browser history completely (Mozilla Firefox) and then launched the page. It work for about 5 clicks and then stopped.
    Either way, neither of these are working properly for me.
    Has anyone else had these issues?
    -=Joe
    Has anyone else had an issue with this?

    So someone explained to me that master-detail events only occur within a single report. They cannot be used to communicate across two different reports.
    That is significantly less useful than I originally thought. I honestly that it was a method of communication for one report to update other target reports that are all listening on the same channel. That would have been a powerful feature. A single report refreshing other views in the same report is still useful, but not as much.
    That being said, I still don't understand what the heck is going on with the navigate to BI content feature. I've been testing it out. It works with pivot tables and regular tables. But the moment I add a graph, gauge or even a "Filter" view into the dashboard page, the click stops working. Really really strange stuff.

  • Standard report  for solve inconsistencies with user SAP.

    Dear Experts.
    We have a problem with a user(ZEST) that in the portal when I open a service(application) display a  blue Window of Internet Explorer without display information.
    We have copied this user((ZEST) TO (ZEST2 )with the same roles , however   this user  new work fine.
    My question is:
    There are a standard report  for solve inconsistencies?
    We have deleted the user and have created it of new, however this not work.

    Run the t-code SA38
    Specify the name POWL_D01
    In selection screen specify the user id in USER field of which your facing issue
    Click on Execute
    Run the T-code SA38
    Specify the name POWL_WLOAD
    In selection screen specify the user id in User input field of which your facing issue
    Click on Execute
    Now you check it issue will solve.

  • Serial Profile "2 Inconsistencies in stock data - error" is NOT validating GR&GI

    Hi Gurus,
    I have the following scenario:
    1.- We have customized in OIS2 a Serial Profile (X001) and added the following Serializing procedures:
    MMSL - Maintain goods receipt and issue doc.     03     02
    PPAU - Serial numbers in PP order                       03     02
    PPRL - PP order release                                       03     02
    2.- We have selected in StkCk option "2 Inconsistencies in stock data - Error"
    3.- We create material "TEST" with Serial Profile (X001)
    4.- We GR (561) the material TEST with serial 111
    5.- We create an Order for material TEST
    6.- We GI (261) the material TEST serial 111
    7.- We GR (501) material TEST serial 111
    System is allowing me to GR the same serial against the same material. We are working with PM Orders and these materials (equipments) that we GI in the future will be uninstalled (262) and will come back to our Storage Location. We cannot have 2 same serial numbers against the same material (equipment).
    Do I need to customize anything else?
    Regards

    Adding Error Anaylsis:
        Short text of error message:                                            
        Only 0 serial numbers entered instead of 1                              
        Long text of error message:                                             
         Diagnosis                                                              
             There is a serial number obligation, so the number of serial       
            numbers must equal the number of serial numbers in the material document. 
             You can post the operation only if you entered the correct number  
             of serial numbers previously.                                      
         System Response                                                        
             Depending on the context in which the error arises, the system     
             continues processing, or the required function cannot be performed.
         Procedure                                                              
             You have the following options, for example:                       
             o Check that the serial numbers are entered fully.               
             o If necessary, display an error log.                            
             o If necessary, contact your system administrator.               
        Technical information about the message:                                
        Message class......."IO"                                               
        Number.............. 304                                                
        Variable 1.......... 1                                                  
        Variable 2.......... 0                                                  
        Variable 3.......... " "                                                
        Variable 4.......... " "                                                
    Trigger Location of Runtime Error                                
        Program.........................SAPLMBWL             
        Include...........................LMBWLU21             
        Row................................62                   
        Module type...................(FUNCTION)           
        Module Name.................MB_POST_GOODS_MOVEMENT

  • FI-New GL Issue - Inconsistencies in time of creation in Table FAGLFLEXA an

    Hi,
    We are facing the following issue in ECC 5.0 with New GL Active
    When a journal entry is created, the current time is captured (EST) at the header level of the document and is available in the BKPF table. The same document is also updated in FAGLFLEXA table. However, in this table the current EST time is not shown as the time at which the document posted. It is showing corresponding GMT time.
    So for example if the document is created at 13:00:00 EST, in BKPF the time shown is 13:00:00. However in the FAGLFLEXA table, for the same document, the time stamp is 18:00:00. (which happens to be GMT time).
    This is resulting in inconsistencies with respect to BW extraction.
    All the configuration relating to time zone at the general settings level are set to EST.
    If any of you have faced this issue and resolved it, please inform as to how you had resolved it.
    Regards
    Kiran I

    Hi,
    Use the safety interval (lower limit) as a buffer.
    Safety interval = Difference ( EST - GMT) + Actual safety interval (example 1800 s).
    Hope this helps.
    Kind Regards,
    Kurt

  • Can anyone help me. Every time I open iPhoto 9.2 and try to go to photo stream iPhoto quits unexpectedly.  When I reopen I get "iPhoto has detected inconsistencies in your library.  Please click Repair to avoid any potential problems."

    Can anyone help me.  I have iPhoto 9.2 and  Mac OS X 10.7.2.
    Every time I open iPhoto 9.2 and try to go to photo stream iPhoto quits unexpectedly.  When I reopen I get "iPhoto has detected inconsistencies in your library.  Please click Repair to avoid any potential problems."
    I have read plenty of the posts on the subject and it seems that deleting the "3ivx" fixed the problem.  I looked at the detaied reports and see where it says "
    Library/Application Support/3ivx" etc..
    On my report it says "/Library/Application Support/iLifeMediaBrowser/*/iLMBiPhoto8Plugin".  Does this help with an answer?

    I am also having this crashing problem. I am running lion on a 2010 mac mini. My iPhoto library is kept on an external drive. I just upgraded to iPhoto 11 and everytime I try to enable photo stream the app crashes. I have tried all the above suggestions, including re-installing iphoto from the Mac App store. Below are the first 50 lines of the error message. Any help would be greatly appreciated.
    Process:         iPhoto [430]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.2.1 (9.2.1)
    Build Info:      iPhotoProject-628000000000000~1
    App Item ID:     408981381
    App External ID: 4641130
    Code Type:       X86 (Native)
    Parent Process:  launchd [160]
    Date/Time:       2011-11-02 22:33:22.628 -0500
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          526713 sec
    Crashes Since Last Report:           9
    Per-App Interval Since Last Report:  4439 sec
    Per-App Crashes Since Last Report:   8
    Anonymous UUID:                      8147E0FC-2622-4A56-920E-44498E48B55B
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    VM Regions Near 0:
    --> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL  /Applications/iPhoto.app/Contents/MacOS/iPhoto
        __TEXT                 0000000000001000-0000000000d1b000 [ 13.1M] r-x/rwx SM=COW  /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Application Specific Information:
    objc[430]: garbage collection is OFF
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.apple.iPhoto                        0x00824501 0x1000 + 8533249
    1   com.apple.iPhoto                        0x001678d6 0x1000 + 1468630
    2   com.apple.Foundation                    0x91bdff49 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 49
    3   com.apple.CoreFoundation                0x95508ff3 ___CFXNotificationPost_block_invoke_1 + 275
    4   com.apple.CoreFoundation                0x954d3d78 _CFXNotificationPost + 2776
    5   com.apple.Foundation                    0x91bcb136 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
    6   com.apple.Foundation                    0x91be03ca -[NSNotificationCenter postNotificationName:object:] + 55
    7   com.apple.iPhoto                        0x0016716a 0x1000 + 1466730
    8   com.apple.iPhoto                        0x00167111 0x1000 + 1466641
    9   com.apple.iPhoto                        0x0015c6f4 0x1000 + 1423092
    10  com.apple.CoreFoundation                0x95520e1d __invoking___ + 29
    11  com.apple.CoreFoundation                0x95520d59 -[NSInvocation invoke] + 137
    12  com.apple.RedRock                       0x01d62e61 -[RKInvoker _invokeTarget:] + 33
    13  com.apple.CoreFoundation                0x9551e091 -[NSObject performSelector:withObject:] + 65
    14  com.apple.Foundation                    0x91c1cf64 __NSThreadPerformPerform + 503
    15  com.apple.CoreFoundation                0x9549584f __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15
    16  com.apple.CoreFoundation                0x95495206 __CFRunLoopDoSources0 + 246
    17  com.apple.CoreFoundation                0x954bf0d8 __CFRunLoopRun + 1112
    18  com.apple.CoreFoundation                0x954be8ec CFRunLoopRunSpecific + 332
    19  com.apple.CoreFoundation                0x954be798 CFRunLoopRunInMode + 120
    20  com.apple.HIToolbox                     0x93bcca7f RunCurrentEventLoopInMode + 318
    21  com.apple.HIToolbox                     0x93bd3d9b ReceiveNextEventCommon + 381
    22  com.apple.HIToolbox                     0x93bd3c0a BlockUntilNextEventMatchingListInMode + 88
    23  com.apple.AppKit                        0x97b27040 _DPSNextEvent + 678
    24  com.apple.AppKit                        0x97b268ab -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
    25  com.apple.AppKit                        0x97b22c22 -[NSApplication run] + 911
    26  com.apple.AppKit                        0x97db718a NSApplicationMain + 1054
    27  com.apple.iPhoto                        0x0001159a 0x1000 + 66970
    28  com.apple.iPhoto                        0x00010a29 0x1000 + 64041
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib                  0x91bbc90a kevent + 10
    1   libdispatch.dylib                       0x9a5bbc58 _dispatch_mgr_invoke + 969
    2   libdispatch.dylib                       0x9a5ba6a7 _dispatch_mgr_thread + 53

  • Inconsistencies betwen balance and line items

    Hello masters!
    I found some inconsistencies betwen balance and line items. I tried to solve the problem using FAGLF03 and RFINDEX (when executing SAP retrieved: "New GL is active. GLT0 can not be adjusted") but both did not work.
    We have never gone trough an archiving process.
    Thanx

    Ok Renan.
    Bellow is the result of RFINDEX, if you have any idea...
    "Error reconciliation documents indexes sequentially docs."
    Ccode / Doc number / Year / Itm /Text              / Umsks / Umskz / Augdt / Augbl / Zuonr / PK / Wrbtr / Dmbtr / Pswbt /                                             
    PS01 / 100130931 / 2009   / 2   / G/L account /             /             /            /            /20090901/ 50 /-99,77/ -99,77 /-99,77
    *     100130931                                /-99,77/ -99,77 /-99,77
    Edited by: Naej on Jun 20, 2010 8:05 PM

  • Inconsistencies between Balance and Line items

    Hello masters!
    I found some inconsistencies betwen balance and line items. I tried to solve the problem using  FAGLF03 and RFINDEX (when executing SAP retrieved: "New GL is active. GLT0 can not be adjusted") but both did not work.
    We have never gone trough an archiving process.
    Thanx
    Edited by: Naej on Jun 15, 2010 11:00 PM
    Edited by: Naej on Jun 15, 2010 11:01 PM

    Hi,
    This will happen only if you activate line item management after started posting that GL account
    Please execute program RFSEPA01 to set right this.
    Best Regards,
    Madhu

  • UCCX 9.0(2) - CUIC Reports Call Abandoned calls inconsistencies

    Hi,
    We are finding that the there are inconsistencies in the abandons figures shown for a CSQ report for 'Contact Service Queue Activity Report' and the calls that are shown in the 'Abandoned Call Detail Activity Report'.
    For example if I view a CSQ in  'Contact Service Queue Activity Report' I see that there are 18 calls abandon today with 9 dequeued.  However I when run  'Abandoned Call Detail Activity Report', I can only see 4  calls showing for that CSQ.  Before I got to TAC with this has anyone else seen this? 

    Hello Saeed, Kiarash,
    Page 212 on this document explains why.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/programmin...
    Q.Why do the number of abandoned calls shown on the Abandoned Call  Detail Activity Report and the number of calls shown on the Contact  Service Queue Activity Report not match?
    A.These values can differ  because a Contact Queue Detail record may mark a call as dequeued while a  Contact Call Detail record marks the call as abandoned. For example,  consider the following workflow:
    Start
    Accept
    Prompt
    Select Resource
    -Connect
    -Queue
    --Play Prompt (Prompt2)
    --Dequeue
    --Play Prompt (Prompt3)
    End
    If  a call is abandoned during Prompt2 or Prompt3, the Contact Queue Detail  record will mark the call as dequeued but not abandoned from any queue.  The Contact Call Detail record will mark the call abandoned.
    In this  case, the Contact Service Queue Activity Report will show the call as  dequeued from all CSQs for which the call was routed. The Abandoned Call  Detail Activity Report will show the call as abandoned from all from  all CSQs for which the call was routed.
    Another reason is that the call gets aborted after being in the queue.
    Such  calls get marked as aborted in the Contact Call Detail record, and as  dequeued (if it was dequeued before aborting)/abandoned in Contact Queue  Detail record. In this case the CSQ reports will display more abandoned  calls than the Abandoned Call Detail Activity Report.
    Thank you,
    Shadi

  • Inconsistencies data between ODS and RSA3 in SAP system (delta problem??)

    Hi everyone,
    I have a problem in my SAP BW production system. There is inconsistencies data between ODS (using tcode LISTCUBE) and Datasource in SAP system (tcode RSA3).
    I'm using Datasource: 0FI_GL_10 and ODS: 0FIGL_O10.
    In SAP system (using RSA3):
    GL Account: 1202012091
    Comp Code : 5400
    Bus Area: 5401
    Fiscal Year :2008
    Period: 07
    Accum Balance : $0
    Credit Total: $350
    Debit Total: $350
    Sales : $0 
    And in ODS (using ListCube):
    GL Account: 1202012091
    Comp Code : 5400
    Bus Area: 5401
    Fiscal Year :2008
    Period: 07
    0BALANCE : $350  (it should be $0,shouldn't it? )
    0CREDIT: $0 (it should be $350,shouldn't it? )
    0DEBIT: $350
    0SALES: $350 (it should be $0,shouldn't it?)
    I have tried these :
    1. Check if there is a start routine / routine or not in transfer or update rules....and...i get nothing
    2. Check the data using tcode FBL3N..but the data is ok
    And then i tried to trace the process chain and find error on delta infopackage which pull these data
    Date
    07.30.2008 : 231141 records --> error (ODS activation) --> request has deleted forever
    07.31.2008 : 2848 records   --> error (ODS activation) --> request has deleted forever
    08.01.2008 : 135679 records --> error (ODS activation) --> request has deleted forever
    08.02.2008 : 135679 records --> successfull repeat delta action
    From 30 July until 1 August there is an error on delta infopackage because
    fail to activate ODS (No SID found for value 'RIM' of characteristic 0UNIT). On 2 August someone delete the red requests and repeat the delta and success. Is there any possibilities that this problem arise because of this? If this the cause, how to bring back 2848 and 231141 records which has deleted?
    Thank you and Regards,
    -Satria-

    Hi everyone,
    I have solved my problem. I executed my infopackage again (selection condition using GL Account which have wrong amount) with update mode 'Full update' and choose Scheduler > Repair Full Request and tick the checkbox.Thank you.
    Regards,
    -Satria-

  • Mass structure and table Inconsistencies after upgrade

    Hi all,
    I'm on an upgrade project upgrading system from R/3 4.6 to SAP ECC 6.0 EHP4. After the upgrade, apparently there's a mass inconsistencies that happen in the table. There's at least 1000 table which can be activated because of this inconsistencies between runtime and DDIC based on the checking run using program RUTMSJOB.
    I've tried applying note 1248769 but it does not fix the problem. I've also tried the mass checking and activation feature of report RUTMSJOB which also does not fix the problem.
    Has anybody encounter this problem before? What's your solution on this problem?
    Here's the pic of the condition of the table in my SE11
    http://img683.imageshack.us/i/64131370.jpg/
    Here's the inconsistencies which is found:
    http://img375.imageshack.us/i/47550099.jpg/
    Kindly note that the same error happen even after I implement the note correction 1248769.
    Thanks
    -Suwardi-
    Edited by: Suwardi Nursalim on Jul 9, 2010 9:40 AM - Change pic link.

    Hello Suwardi,
    please inform which actions you took in SPDD and SPAU - this is key for a problem like yours.
    Did you have a transport request ready with modifications from a previous upgrade? Please check these notes:
    #68678:   Exporting modification adjustment for second upgrade
    #610311: Importing modification adjustment in second upgrade from 620
    Lastly, did you run the upgrade with latest sapup version AND latest upgrade fix?
    Now in order to fix the problem, you'll likely have to restore from backup and perform the upgrade again. Alternatively, please check note #1406740 (are you using IBM's DB2 as your database?). If you faced the problem described on this note (which points to errors in table DD03L during EU_IMP2 phase), you need to apply FP8 like on this note.
    Then you could proceed like the following to fix the problem:
    1. Restore the backup from phase MODPROF immediately before the downtime including the /usr/sap/P01/upg/abap directory
    2. reset the Upgrade with report RSUPGRES
    3. clear the upgrade directory
    4. Start the upgrade from the very beginning after installing Fix Pack 8 for your database.
    Please let us know if this helped.
    Tomas Black

  • SQL SERVER 2014 - Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.

    I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
    Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
    Luckily my solution only has 10 packages.  I have verified and re-verified that everyone is set to dontsavesensitive.
    I have verified and re-verified that the solution has the protection level to dontsavesensitive.
    What on earth is going on here?  I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
    Can someone please help me out here?
    The Degenerate Dimension

    Hi MMiligan,
    Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
    So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
    If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
    protection level corresponds to the value of 0):
    DTS:ProtectionLevel="0"
    The following similar thread is for your reference:
    http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Outlook Integration inconsistencies

    Dear Members,
    I have been testing the outlook integration functionality in Sap B1 2005 and Sap B1 2007 and the concept is very good because it enhances CRM for clients as well as integrated communication into the erp package.
    However, I have found some inconsistencies in the solution whereby a specific functionality works inconsistently. Find below some of the queries I had and if anyone has come across them, kindly advice.
    1) When an email is saved as an activity and the contacts in the email are not directly linked to  a specific business partner, the dialog box only provides an option to save the email to the email addresses and not any business partner. We can therefore not choose to have the email saved as an activity of a business partner. It would also be wrong to add the email addresses as contacts of that specific business partner as they are not.
    2)Emails which have signatures are not saved correctly as attachments to an activity. The u201Ccontentu201D of the email is saved in the activity of the business partner, yet in the u201Cattachmentsu201D the link to the email is not present.
    3)u201CSave Email as activityu201D does not always give options to save. It will act as u201CQuick save-email as activityu201D and save the email without giving any prompt.
    4)After selecting the appointments ( in outlook ) to synchronize with sap, the appointments which are not synchronized initially will keep coming  up every time a synchronization is done. This results in a very long list of appointments in outlook which constantly have to be deselected and is very monotonous.
    5)Once the add on is connected and a user creates an appointment in outlook, a prompt appears to synchronize it with sap. If the prompt is cancelled and at a later time a manual synchronization is done, the appointments in outlook which were not earlier synchronized do not appear in the list for appointments to be synchronized. Therefore, we have to go and manually synchronize them one at a time.
    6)There is no current facility to save emails as  activities for multiple business partners.
    Thanks in advance
    Kind regards,
    Indraj.

    Hi Lisa,
    Please go through note 1229026.
    https://service.sap.com/sap/support/notes/1229026
    We ran into several issues on 2007A OI add-on and this turned out to be the problem.
    On safe side, please run it on backup company DB.
    Hope it helps.
    Regards,
    Jacqueline Jiang
    SAP Business One Forums Team

  • How to deal with BP inconsistencies in SRM?

    Dear Experts,
    How to deal with Business Partner inconsistency in SRM?
    A BP is damaged beyond repair?
    Should we delete the BP of the user (SU01 user)? Are we allowed to delete a BP? or do we need to archive the BP?
    What will happen to the follow-on documents of the particular BP?
    Should we close all the transactional documents or we should simply the change the BP of the documents manaully?
    Please, share your expereince.
    Thanks and regards,
    Ranjan

    Hi
    What kind of Inconsistencies are there...Deletion of BP is last resort in such cases. Although its only possible to put a deletion/blockecd indicator for the BP. BP is never deleted completely from SRM unless you archive it.
    Regards
    Virender Singh

Maybe you are looking for